System won't start no-unknown error checking

Similar Questions

• My computer crashes! -unknown error checking

  The computer is a Microsoft Windows XP Professional. It is rather more older (2005) and was not up-to-date or online until a few years ago. (Mainly used for games.) However, it is almost unusable now, because it hangs on a consistent basis.

  There are several different problems. The most common one is a random stop that occurs out of the blue. Most of the time it restarts and reports "system has recovered from a serious error." These error reports are different and do not have a common denominator. Sometimes they are corrupt. Other times, the computer is simply blank after the accident. the monitor to fall asleep and the tower still running.

  There is also a 'frozen' system that occurs just after the start. He reached the office but does not do so. Sometimes the keyboard and the mouse still work, but I can't click on anything. (I'm usually off manually after these two problems).

  I would include all system information I could, but unfortunately I can not turn on the computer for trouble right now. When I turn it on, the screen simply says "VGA status: no Signal input." It is like that for ever until I have turn off manually. (It's happened and I will continue to try to get it started). I tried safe mode; seems to work very well. I tried a clean boot this morning; It starts fine but after I put it in sleep mode, it is dead...

  I'm lost as to what is causing all this. This random failure has been occurring regularly for more than a year. Some days it hangs constantly and there are days when it works quite well. I tried every virus program, running the check disk, fragmentation and the installation of each update available. Nothing seems to help or give me a clue as to what is wrong, because when the computer is not crashing, it works perfectly fine!

  There are also several non-plug-and-play devices that have a yellow warning sign next to them. They all have the letter K and the other numbers to them, with the exception of a device series. They all give me code 24 (this device is not working properly or is not all its drivers installed, or something like that.)

  I would point out that the computer had viruses and Trojan horses on it, but I think they have been removed. I have Microsoft Security Essentials, Malwarebytes, and SuperAntiSpyware on it.

  In addition, there is an annoying tendency of balloons popup that warn me that firewall Windows has been disabled. Half the time, I opened the firewall and it is on. The rest of the time I have to manually turn it back on. Any idea what could be the cause?

  And regarding "recently installed programs" that could cause this problem of crash, it is impossible, because he does this for years!

  Sorry for the length of this. There are a lot of problems with no real information. I wish I could provide more data and I'll try to when the computer is running again, but I don't really know where to start. I hope that's not a failure of the motherboard or something...

  I'm very happy for any kind of help!

  Hello M & Mmpty,

  I took a glance at the last dump.  It was a stop 0x8E.  From what we see in the landfill, MPFilter.sys seems to be the culprit on this one.

  It is a component of Microsoft Security Essentials.

  Here is the stack of debugging information.  As you will see, MPFilter is at the top of the stack:

  STACK_TEXT:
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  efa25938 f2057082 8606d57c efa25988 00000040 MpFilter + 0x117e0
  efa25964 f728fef3 8606d57c efa25988 00000040 MpFilter + 0xc082
  520 520 fltmgr 8606d 00000000 0006d f7292338 efa259cc! FltpPerformPostCallbacks + 0x1c5
  efa259e0 f7292867 8606d 520 85e58de0 efa25a20 fltmgr! FltpProcessIoCompletion + 0x10
  efa259f0 f7292ef9 85fc 8020 85e58de0 8606d 520 fltmgr! FltpPassThroughCompletion + 0 x 89
  efa25a20 f729f754 00000000 00000000 fltmgr efa25a40! FltpLegacyProcessingAfterPreCallbacksCompleted + 0 x 269
  efa25a5c 804ef19f 85fc 8020 85e58de0 85e58de0 fltmgr! FltpCreate + 0x26a
  efa25a6c 8657e9c8 80583220 85eed4b4 efa25c04 nt! IopfCallDriver + 0 x 31
  efa25b4c 805bf488 8657e9e0 00000000 85eed410 nt! IopParseDevice + 0xa12
  efa25bc4 805bba14 efa25c04 00000000 00000040 nt! ObpLookupObjectName + 0x53c
  efa25c18 80576057 00000000 00000000 00000001 nt! ObOpenObjectByName + 0xea
  efa25c94 805769ce 011fedb8 011fed58 80100180 nt! IopCreateFile + 0 x 407
  efa25cf0 805790d 8 011fedb8 80100180 011fed58 nt! IoCreateFile + 0x8e
  efa25d30 8054167 011fedb8 c 011fed58 80100180 nt! NtCreateFile + 0 x 30
  efa25d30 7c90e514 011fedb8 011fed58 80100180 nt! KiFastCallEntry + 0xfc
  00000000 00000000 00000000 00000000 0x7c90e514 011fedb0

  The standards of antivirus, it seems to be enough old-April:

  1: kd > lmvm mpfilter
  start end module name
  f204b000 f2071800 MpFilter T (no symbol)
  Loaded symbol image file: MpFilter.sys
  Image path: MpFilter.sys
  Image name: MpFilter.sys
  Timestamp: Sea APR 06 13:25:55 2011 (4D9CB033)

  I would recommend the following: measures:

  1. Download the latest version of Microsoft Security Essentials.
  2. Uninstall the current version.
  3. Reinstall the freshly downloaded version.

  Let us know if you have any questions about it.

  I will consider other landfills shortly.

  Best regards

  Matthew_Ha

• AddNode cmd failed for the secondary node: internal error of AAM - agent could not start. : unknown error HA

  I'm testing paths to upgrade to vSphere ESX 3.5 update 4 on an IBM BladeCenter with 2 hs21 xm Server blades; I am going through several problems, and the last is the one mentioned in the subject of this thread.

  In this scenario, I've upgraded successfully vCenter then I took all the virtual machines on a single host esx 3.5, I removed the other host in the cluster, and then vcenter, then I did a new install of vSphere, I reconnected it the host to the cluster then I did all the procedure with the second node. In the end, I have two installed vSphere hosts but I had to disable my cluster HA always been, I get this error when I try to configure HA agents on the hosts, but I must say that the DRS ok works.

  In the release notes for vSphere, in the section known issues, I can read:

  "Upgrade of an ESX/ESXi 3.x host an ESX/ESXi 4.0 host results in a successful upgrade, but VMware HA reconfiguration may fail.

  When using vCenter Update Manager 4.0 to upgrade an ESX/ESXi 3.x ESX/ESXi 4.0 host, if the host part of an AP or DRS cluster, the update succeeds and the host is reconnected to vCenter Server, but HA reconfiguration may fail. The following error message in the summary of the host tab: HA agent has an error: cmd addnode failed for the main node: internal error of AAM - agent could not be started. : HA unknown error.

  Solution: manually reconfigure HA by right-clicking on the host and select Reconfigure for VMware HA. »

  The problem is that of workaround does not work for me, so I was wondering if someone, is once again able to help me with this problem.

  Thanks in advance for your support.

  Hi Caddo,

  I had the same problem with one of my hosts.  It was resolved after disabling HA on the cluster and enabling again.

  Mirko

• Hard drive, at default, installed the new hard drive, Windows XP Home Edition won't start more additon error 800b0100 does - is what I do?

  My computer is 4-5 years: Inspiron 530, my operating system is Windows Home Edition SP. My hard drive has failed. I installed another hard, formatted drive with the CD that accompanies the Service Pack 2 computer, and then tried to install (from CD) Windows XP Home Edition, has received the error 800b0100 message.  What should I do?

  Hello

  1. what kind of hard drive you are using? IDE or SATA
  2. What is the full and exact error message?

  Check if the following steps will help:

  1. While the installation program is running and the error message appears on the screen, press SHIFT + F10 to start a command prompt.
  2. at the command prompt, type cd\windows\system32\ and then press ENTER.
  3 type rename catroot2 catold, press ENTER, and then restart the computer.
  4. check again the issue.

• Intel Extended thermal model MCH temperature sensor pilot a pilot of the system won't start not

  I tried to fix this on my laptop and I get the error code 10.   He suggested that if I tried to reinstall the driver it can solve the problem.  Then I hit, apply the fix.  As he looked through windows update for driver and try to install it, it came up saying device driver has not been installed successfully. Please consult your device manufacturing to install the unit.

  Issued by troubleshooting it: Driver must be reinstalled.

  It is a portable 10 years old running windows 7 32 bit.  The problem happened roughly around April 11, 2015. and never had a problem to solve.  Can someone help me with this problem? Please, I beg you.

  Hi Phoward,

  Welcome to the Microsoft community.

  Did you install a device or make any changes on your computer?

  A Code 10 error is generated when the Device Manager cannot start the hardware device, a situation usually caused by outdated or damaged drivers. You need to download the latest drivers updated on your system.

  I suggest you to run the below Microsoft Fixit and check if this is useful:

  http://Windows.Microsoft.com/en-us/Windows/tips-fixing-common-driver-problems#tips-fixing-common-driver-problems=Windows-7

  If the problem persists, see the Article below and perform the troubleshooting steps and check if this is useful:

  https://support.Microsoft.com/en-us/KB/943104

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Operating system does not start; F11 gives error.

  HP Pavilion dv7

  0xc000000f error code

  -does not start the o/s

  -not boot to safe mode (or whatever it is)

  -System gives error F11 recovery

  -friend did not restore system cd

  -OS is Windows 7

  I removed the hard drive and slave it to my office (using 2.5 USB cable).  The files are accessible except the \USERS directory is MIA.  If I can see the C: and D: (recovery partition)-

  Can I run the program on my desktop computer to create the recovery CD?  (faster you proceed your order/delivery/arrival)

  Other suggestions?

  Thank you...

  ACETech says:

  p/n: NM295UA #ABA

  Installation media (recovery dvd) was not made by the user.  That's why I asked if I could make running the hard drive from outside the laptop (enslaved at my office).  Thanks for the info, I can't do that.

  Will be there without you say the o/s?  It is not sure that vista or 7 32-bit or 64-bit.

  Looking at his hard drive Windows and a Linux flash player, I don't see his user under the \users Directory directory.  It of funny, just might be blown away...

  It's Windows Vista Home Premium 64-bit with Service Pack 1.

  Here link to the specs page.

  Best regards

  ERICO

• Windows firewall won't start, 6801 Code error in the event log viewer

  When I try to start my windows firewall manually it just says that it cannot be run.
  I checked dependencies of firewall are running via services.msc
  (CPP) Remote procedure call is started and set to automatic
  DCOM Server process Launcher also started and set to automatic
  These are the only 2 mentioned in the tree of dependencies.

  Ive tried going into regedit according to the http://forums.techarena.in/vista-security/754147.htm
  But could never find the % query defined values, they have mentioned that only how to make them.

  Program installed Antivirus is ESET 4.0 with firewall.
  Tried to disable all the services start and no microsoft via msconfig services, but the firewall still does not start.

  My system is running Windows Vista Premium.

  I have no idea why the firewall just quit on me, I turned it off when I installed ESET smart security 1-2 years back.
  I've been juggling start services to try to make my computer faster startup could be something I did.
  I even tried their activation at unsuccessfully.

  Im going to do a full analysis of the Virus to see if it could be the culprit, but its highly unlikely it seems.
  No matter which entry of the Forumites here would know it that I really need to get the windows firewall service starts to install my drivers for the new printer I just bought
  (part of his installation required to start the windows firewall to configure, when it fails it cant complete the installation)

  I solved it thnx to DaGreenOne,

  It wasn't enough to just disable the ESET firewall,
  You must completely uninstall the ESET program to the windows firewall to work again.

• Operating system will not start and run - error codes 2000-142, 0F00:075 D, 41166486 uncorectable data error media wrtie block protect error code 0F00-0244

  I have dell 1525 top of the tower and OS will not run. Error code 2000-142, status bite 79, error code 0F00:075 D and Bios memory hard drive, SATA drive read your 41166486 data uncorectable media wrtie error block protect error code 0F00-0244then kept showing up on several more blocks.  Can I fix?  Joe

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to start the computer in safe mode and check if you can start the computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the verification and startup repair if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• Thunderbird won't start, gives the error message of compatibility

  When I try to run Thunderbird, I get an error message that says:

  "Error: platform version ' 38.4.0 ' is not compatible with
  minVersion > = 38.3.0
  maxVersion < = 38.3.0

  The version of the file that is listed is 38.3.0.5749 and the version of the product is 38.3.0; last updated 10/5, apparently.

  reinstall everything, your mail and the setting will not be affected and any other file is corrupted will be if all goes well replaced.

• Help! Laptop won't start up. BSOD "Stop: c000021a {fatal system error}...". »

  I have a laptop Dell Inspiron 1750. Since Sept 09.

  Starting from Saturday, may 8 my system won't start up

  I turn it on it loads the Dell logo, loads the windows logo, and then flashes a blue screen for a split second (the blue screen flashes so quickly that it is difficult to read what he says, so I recorded it and it comes up with "STOP: c000021a {fatal system error} the verification of a knownDLL failed.") system process finished unexpectedly the status of 0xc000012f (0x0007c220 0x00000000) the system has been shut down.) and restarts after the dell logo loading again it goes to a black screen with the options to launch start up repair or start windows normally.

  I have Launced the Startup Repair, after loading files and checking for problems it says then Startup Repair cannot repair this computer automatically. I made the diagnosis and he says there is no problem, I have contatced dell as it is still under warranty but they said this isn't a hardware problem, it is a software problem and infact NOT covered by the warranty and I have to pay £60 to have the support of the software. I don't have a recovery disc and tried to restore the system to an earlier stage. But no luck!

  Was hoping someone here, perhaps a solution. Please please please help!

  Thank you very much
  Ship

  Status 0xc000012f is "STATUS_INVALID_IMAGE_NOT_MZ" - "the file specified image did not have the correct format, it did have an initial MZ." (anecdote: binary windows start with MZ - the initials of Mark Zbikowski - who was a promoter of the MS-DOS product)

  That, with "a knownDLL verification failed."  Basically telling you that you have corrupted files on your system.  Any chance you are able to boot into safe mode or safe mode with command prompt to run SFC/scannow?  Can you somehow shoot out of the system event logs and check the events worthy of attention?  Are you all able to run chkdsk on the drive through the command prompt in the System Recovery Options?

• I have a G62-355DX laptop and is 11 months old. and it won't start. It has error codes

  I have a G62-355DX laptop and is 11 months old. and it won't start. There error codes when I do a test of the system. DST short: failure failure ID: RTX6T9-5B75S5-XD003F - S 60, 903.

  Product ID: XH068UA #ABA

  Hello

  As the error code relates to a short drive Self Test failure - the only real solution to this is to replace the hard drive.

  As your laptop is still under warranty, contact HP to make arrangements for the replaced disk.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Won't start, error message empty

  I bought, installed and started using Dreamweaver 8 on my Mac OS x 10.4.7. I exit the application. When I tried to open subsequently, it won't start and the error message is empty (other than the! sign and the "ok" button). I can't find anything in the knowledge base supprt data for help. I do not want to reinstall because then I will use my second and final installation.

  > because then I will use my second and final installation.

  No, you won't.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "davidoconnor123" wrote in message
  News:eavkf4$M4U$1@forums. Macromedia.com...
  > I bought, installed and started using Dreamweaver 8 on my Mac OS x 10.4.7.
  > I
  > exit the application. When I tried to open it later, it doesn't start and
  > the
  > error message is empty (other than the! sign and the "ok" button). I have
  > can not
  > nothing found in the knowledge base supprt data for help. I don't want to
  > reinstall it because then I will use my second and last
  > installation.
  >

• Error 'Check' [Fail] media startup

  Hello

  My laptop Dell XPS 14 purchased recently started throwing strange error 'Check' media [Fail] at boot time and does not start. I ran the Diagnostics but not found error. I did a few trails as allowing the start of the legacy, changing device boot order... etc, but nothing worked. Could some body help us with this please.

  Make my system: Dell XPS 14

  BIOS version: A13

  Thanks Allan for your help... I have a problem to find the right options in the thread by Francis Mather

  1. press F2 right when the Dell Logo appears.

  2. use the arrow keys to move to the tab named "Boot".

  3 select with the arrow keys so that the text named 'UEFI Boot' is white font color.

  4. navigate to the bottom, where it should say Windows Boot Manager

  5. press F5 or 56, to move in the list until you get the settings like:

  Windows Boot Manager

  UEFI Onboard LAN IPv4

  UEFI Onboard LAN IPv6

  6 hit F10, then your system will restart, without this annoying message appear.

  I am not able to find an option "Windows Boot Manager" in the UEFI boot menu. I have only two options i. UEFI Onboard LAN IPv4, UEFI Onboard LAN IPv6

  As I missed something here?

• Pictures on a new iMac won't start - he's trying to fix the photo library after the migration of my old iMac.  The two are running El Capitan

  Photos on my new iMac won't start - get an error message after trying to fix the photo library.  I just migrated all of my old iMac a new aid of Time machine backup.  Both are running OS 10.11 (El Capitan).

  Get an error message after trying to fix the photo library.

  What does this error message say?  Photos crash or exit gracefully?

  Where your iPhoto library that Library stored? In your pictures folder, or on an external drive?

  Try to copy the library of Photos directly without Time Machine. Connect the two Macs using your network and copy the old Mac to the new library, well as signed in on your new Mac.

  Then try to open this copy in Photos.

• Unknown error in Microsoft Mail remove

  For about 2 months now I did my usual purging of junk e-mail and regular mail from my Inbox (Windows Vista). What is not normal, it's that I started having 'unknown error' and when I try to delete some mail.  Does not seem to be a model for what mail chooses to do.  My deleted items folder becomes huge.   I go through the accounts of two mail I choose which ones I want to delete, and sends Mail to the deleted items folder. From there on, I can't delete them... The From and the subject on the Mall is still there, but the body of the email said:
  Message could not be displayed

  Windows Mail encountered an unexpected problem with this message. Search on your computer lack of memory or low disk space, and then try again.

  Windows Mail

  For about 2 months now I did my usual purging of junk e-mail and regular mail from my Inbox (Windows Vista). What is not normal, it's that I started having 'unknown error' and when I try to delete some mail.  Does not seem to be a model for what mail chooses to do.  My deleted items folder becomes huge.   I go through the accounts of two mail I choose which ones I want to delete, and sends Mail to the deleted items folder. From there on, I can't delete them... The From and the subject on the Mall is still there, but the body of the email said:
  Message could not be displayed

  Windows Mail encountered an unexpected problem with this message. Search on your computer lack of memory or low disk space, and then try again.

  Windows Mail

  See if this tutorial will help you. SECONDLY, the section started with is your best way to do it.

  http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.html

  t-4-2