T41 problem with on screen display Ati Mobility Radeon

Similar Questions

• Need driver for display (ATI Mobility Radeon 7000 IGP)

  Need driver for display ATI MOBILITY RADEON 7000 IGP OS Win 98, ME

  Hello
  I put t know which laptop model you use, but all the drivers, you can find on http://eu.computers.toshiba-europe.com topic support & downloads.

• Biometric USB peripheral input and ATI Mobility Radeon HD 5000 series

  Hello

  I installed windows 8 pro in my HP dv6 3300 ev Notebook.

  Everything ok except two questions.

  First, in the Device Manager, in biometric devices, USB biometric Input Device does not!

  The poster message in properties, general tab is

  This device cannot start. (Code 10)

  {Operation failed}
  The requested operation failed.

  Second issue is with my adapters display, ATI Mobility Radeon HD 5000 Series (Microsoft Corporation - WDDM v1.20) that does not work too!

  I also have the same message

  This device cannot start. (Code 10)

  {Operation failed}
  The requested operation failed.

  Any ideas?

  It seems that this system has not been certified for Windows 8 basic still on the list of drivers .

  The graphics driver is going to be the most important issue due to the switchable graphics, it seems to use (Intel and AMD). Due to the switchable graphics, a pilot out of HP will be the only way to get the switchable graphics to work really the same as it did before Windows 8 due to differences in driver architecture.

  You can try to install the driver Validity Sensor and SimplePass software, but I know that this does not work on my system which is in the same category as your system when it comes to Windows 8.

  Maybe the best solution is to return to the old operating system with a recovery until there are drivers of Windows 8 (I don't know if or when this will happen). I'm sorry.

• When I update my driver for the card ATI Mobility Radeon HD 3650 with live update my screen goes black

  When I update my driver for the card ATI Mobility Radeon HD 3650 with live update my screen goes black and stays black even after a reboot. I turn it off to go back to my office. nothing will be displayed, but the screen is powered.

  When I update my driver for the card ATI Mobility Radeon HD 3650 with live update my screen goes black and stays black even after a reboot. I turn it off to go back to my office. nothing will be displayed, but the screen is powered.

  Hello

  When you say "live update" are you talking about Windows Update?

  If so, you can go to the ATI site and download the latest driver for this video card. Here are the download links for the drivers later, Windows 7, 9.9 32-bit and 64-bit version for the Mobility Radeon 3000 series.

  ATI Catalyst Mobility Radeon Display Driver 32-Bit

  ATI Catalyst Mobility Radeon Display Driver 64 bit

  Hope this helps

  Thank you for using Windows 7 Ronnie Vernon MVP

• Problems with graphics ATI Mobility Radeon HD 5470 during matches.

  I have graphic problems on many games. I downloaded and installed the latest drivers from the HP website. These games used to run smoothly, without problem. Quality of play has no effect on the issues. I have included an album with examples of the questions.

  HP Pavilion dv6t-3000 CTO Entertainment Notebook PC

  Windows 7 64 bit

  ATI Mobility Radeon HD 5470 graphics card

  http://imgur.com/a/p5QD4

  Any ideas? Any other information needed?

  Hello

  It seems thay your graphics card can't be borne entirely by the games.

  Try the AMD driver and check the result.

  Uninstall the ATI/AMD graphics driver. Click on the link below:

  How do I uninstall ATI / AMD a Microsoft Windows 7 graphics card drivers.

  Download and install the latest driver from AMD here.

  Note:

  Install the driver reference at your own risk! Although the driver is provided by AMD, it is not guaranteed that it will work normally in all circumstances.

  If it won't change anything for the better, then you can simply use the same procedure and go back to the HP driver that is here.

• ATI Mobility Radeon X 1400 with the problem of the TV, only the black and white photo

  Hello

  When I try to connect my TV to my Dell Inspiron 6400 with ATI Mobility Radeon X 1400 card, all I get is a black and white image. I have tride all the PAL settings.

  What I tried: I connected the s-video with an s-video cable output to my TV s-video connector (composite) result: no color image, just black and white of my office.

  I connected the s-video with a s-video SCART cable output to my SCART TV (RGB signal) result: no color image, just black and white of my office.

  I connected the s-video with a s-video SCART cable output to my SCART TV (composite signal) result: no color image, just black and white of my office.

  His is no problem, this workt fine.

  Anyone know how can I get the color on my TV? Is this possible with my s-video cables? What type of signal you send with my Mobility Radeon X 1400 graphics card?

  Kind regards

  Marcel

  
  

• BSOD BCCode 116 - generated after installing updated drivers for ATI Mobility Radeon HD display drivers for HP Probook 4520 s 5470

  I continue to work through issues with my HP Probook 4520 that is now almost 4 years with the same problem of a frozen screen.

  Today, I decided to work in seeing if there was new ATI Mobility Radeon HD 5470 available display drivers.

  I have the version of 15/03/2011 of the ATI Mobility Radeon HD 5470.  With that came the AMD Catalyst install Manager Version 3.00.0868

  .

  During his visit the HP site I saw that they had a newer version available on the graphics card available with the date of April 30, 2011 and the download file has been identified as sp52818.exe for the Version of the graphics driver to download 8.743.2-- 110315 5A - 115833C.

  In light of the penalty, that I got with my graphic display driver 15/03/2011, I decided to uninstall the drivers of my 15/03/2011 and download the drivers of 30/05/2011.

  Doing this has my computer I notified that I already have the sp52818.exe file and so I was a little confused, but I allowed him to install over my existing file.

  To install the file sp52818.exe successfully, I went to work.  Then after some time (within an hour), I got a message generated by computer at the bottom right of my screen saying a newer version of my graphics card was available at www.amd.com .

  (first thought was - why HP had it?)

  In any case... I decided to click on the suggestion box, visit www.amd.com and see what they had.  I was directed to install a driver to automatically detect the utility, and during the installation, the utility's suggestion came back that my computer can access a new graphic display driver.  I thought it was nice and so I then proceeded to of course download the .exe file for my HP probook 4520 s.  The proposed file was qualified: 13-12_mobility_win7_win8_64_dcl_ccc_whql_exe (graphic display for the ATI Radeon HD 5470 by suggestion of AMD driver.)

  Everything goes well.  It starts to download the Catalyst install Manager Version 08.00.0915, then the ATI display drivers with > .NET Framework 4.5 (I'm just observing things that are facts).  Several times the black screen comes on, but that is to be expected.  I wait patiently, and finally I see the green bar of progress.  Just as the green bars come in the end, the screen goes black again for about 1 to 2 minutes.  Then suddenly the dreaded BSOD Blue Screen of Death comes with an error message saying that something has gone wrong and closing of windows, and he mentions something about Windows display drivers.  I'm not panicking yet, but is offered the possibility of recovering and I let the computer pick up normally, and I return to the screen of welcome with happiness and connect to.

  From the entrance, the first thing I see is a Windows Error Message, I opened and saved and here provide for our education and research.

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033

  More information about the problem:
  BCCode: 116
  BCP1: FFFFFA8008E1D010
  BCP2: FFFFF88004EFFD88
  BCP3: 0000000000000000
  BCP4: 0000000000000002
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\021414-72946-01.dmp
  C:\Users\Owner\AppData\Local\Temp\WER-179057-0.SysData.XML

  Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\System32\en-US\erofflps.txt

  * * * * *

  I'm not able to open the .dmp file to display as the file associations cannot establish a connection, and I am unable to find the AppData file under users.  Windows 7, it is extremely difficult find the files suggested by error messages.

  I would like to know why the BSOD appeared, then please explain the error message that came as I was trying to install a driver recommended for my computer using download driver acceptable practices, causing me concern and frustration, as well as the 4 years of intermittent to faithfully display failure.  I'm not sending the machine backwards.  There must be a solution.

  (Rabbit Trail - the suggestion to display the privacy statement is also an attempt to distract people to get a real fix and do believe that Windows 'help' you who isn't.)

  The laptop is running and I can see things on the screen.  It seems OK, but I'm going to face other issues?

  Thinkgal.

  VIDEO_TDR_FAILURE (116)
  Try to reset the display driver and recover from timeout failed.
  Arguments:
  Arg1: fffffa8008e1d010, optional pointer recovery environment internal TDR (TDR_RECOVERY_CONTEXT).
  Arg2: fffff88004effd88, the pointer in the responsible device driver module (owner tag).
  Arg3: 0000000000000000, optional error (NTSTATUS) of the last operation code failed.
  Arg4: 0000000000000002, optional internal context dependent data.

  STACK_COMMAND: .bugcheck; Ko

  FOLLOWUP_IP:
  atikmpag + bd88
  fffff880'04effd88 4883ec28 sub rsp, 28 h

  SYMBOL_NAME: atikmpag + bd88

  KD > lmvm atikmpag
  start end module name
  fffff880 '04ef4000 fffff880' 04f94000 atikmpag T (no symbol)
  Loaded symbol image file: atikmpag.sys
  Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
  Image name: atikmpag.sys
  Timestamp: Fri Dec 06 15:21:45 2013 (52A231D9)
  CheckSum: 0009FEFF
  ImageSize: 000 A 0000
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  Bug Check 0 x 116: VIDEO_TDR_ERROR

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557263 (v = vs. 85) .aspx

  You are right that the accident may have been caused by the newly installed ATI driver. I checked on the HP Site and there is a version of the same display offered with the same output driver date on the ATI site, so the difference may be that the version of HP's specific system, while the ATI Version is just generic, so my suggestion would be to uninstall the ATI Version and replace it with the HP driver.

  Laptop HP ProBook 4520 s

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=4145326&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4053%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Driver ATI video and control panel (VERSION from HP)
  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=4145326&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_93664_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  *********************************************************************************************************

  Drivers who have to update or delete.

  ArcSoftVCapture ArcSoftVCapture.sys Thu Dec 03 13:32:41 2009 (4B 180449)
  Driver Description: Magic - i Driver ArcSoft

  Driver update Site: Inc.
  --------------------------------------------------------------------------------------
  Impcd Impcd.sys Fri Feb 26 18:32:11 2010 (4B8859FB)

  Description of the driver: Intel® Turbo Boost technology driver

  Driver update Site: http://downloadcenter.intel.com/
  --------------------------------------------------------------------------------------
  PxHlpa64 PxHlpa64.sys Fri May 15 17:43:06 2009 (4A0DE1EA)

  Driver Description: Driver of Sonic CD/DVD (used by many different programs of CD/DVD)

  Driver update site: http://www.carrona.org/pxhelp20.html lists some of the programs it is used in.
  --------------------------------------------------------------------------------------
  RsvLock RsvLock.SYS Fri Oct 02 05:18:24 2009 (4AC5C560)
  Driver Description: McAfee SafeBoot Endpoint Protection driver

  Driver update site: http://www.mcafee.com/us/products/endpoint-protection/index.aspx
  --------------------------------------------------------------------------------------
  These drivers appear to be the remnants of a previous installation of a McAfee product. Please run the cleaning of Macafee utility to completely remove the remnants of MacAfee.

  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  SafeBoot SafeBoot.sys Fri Oct 02 05:18:05 2009 (4AC5C54D
  Driver Description: McAfee SafeBoot Endpoint Protection driver

  SbAlg SbAlg.sys Wed Nov 26 06:00:08 2008 (492D2C38)

  SbFsLock SbFsLock.sys Fri Oct 02 18:05:28 2009 (4AC5C564)

  --------------------------------------------------------------------------------------------------------------
  STREAM STREAM. SYS MON Jul 13 20:06:18 2009 (4A5BCBFA)
  No info?
  --------------------------------------------------------------------------------------------------------------
  stwrt64 stwrt64.sys Thu Sep 09 03:12:10 2010 (4C8888CA)

  Driver Description: SigmaTel Audio Driver

  Driver update Site: OEM - no to http://www.freescale.com/webapp/search/Serp.jsp?SelectedAsset=Downloads

  --------------------------------------------------------------------------------------------------------------

  
  
  --------------------------------------------------------------------------------------------------------------
  TuneUpUtilitiesDriver64 TuneUpUtilitiesDriver64.sys Fri may 25 06:28:19 2012 (4FBF5EC3)

  Please uninstall immediately. This program seems to do more harm than good to your system.

  Delete completely using Revo Uninstaller.

  REVO UNINSTALLER (FREE)
  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  After uninstalling this program, open a command prompt and run the file system (CFS) Checker to verify the intergrity of your system files.

  Remove AVG and replace with Microsoft Security Essentials to see if some of your performance problems are resolved. If you decide that you don't see any remarkable improvement, you can always reinstall AVG.

  Utility to remove AVG.

  http://www.Avg.com/us-en/utilities

  Microsoft Security Essentials

  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

  If you decide to replace AVG and after completely removing TuneUpUtilities, run (SFC.exe) System File Checker tool to verify the integrity of your system files...

  How to run SFC.exe.

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  You monitor the system and let us know if you have any other questions.

• Cannot install latest ATI mobility Radeon x 1600 display driver for my Satellite A100

  Hello

  My Satellite A100-704 PSAA9E is equipped with the ATI Mobility Radeon X 1600 graphics display card, that ATI provides a new driver, named Catalyst 8.3. My problem is that when I run the verification software, I get a message telling me that this driver is not suitable to be installed on my system.

  Is any information available on this subject? I always install the new Catalyst driver or it's better if I do not have? Oh, the current driver, I have running on my laptop is the one downloaded from the Toshiba site, 8.292 I believe.

  Any information is appreciated. Thank you very much.

  It is well known that laptop to the manufacturer is responsible for the support of driver on laptop computers. You're not the first person is facing this problem. To be honest, it is not the problem. The fact is that the laptop manufacturers use updated drivers to protect the equipment.

  Because of this I recommend you to use the Toshiba drivers only.

• Problem with the latest drivers ATI for T400

  I have a ThinkPad T400 2767-B75 with XP Sp3 with ATI Mobility Radeon HD 3400 Series.  (latest version of the BIOS)

  Just installed 8.771 - 100825 a-105152C in date 28/09/2010 and now get the following error every time putting into service or every time I try to enter the catalyst control center.

  ' Could not load file or assembly ' CLI. Implementation, Version = 2.0.3713.40381,
  Culture = neutral, PublicKeyToken = 90ba9c70f846762e' or one of its dependencies.
  The located assembly's manifest definition does not match the assembly reference.
  (Exception from HRESULT: 0 x 80131040) "

  ATI Catalyst does not load... I don't have my previous version of the driver (Version 8.712 - 100302 b-097094C) available and it is not on the site.

  I tried a roll-back of windows driver / reinstall etc with no luck

  No idea how to solve this problem or if there is a sine qua non for this driver?

  John

  OK, I removed all traces of the CCC (directories /... not removed by uninstall registry entries) and reinstalled. Follow-up to the recommendations of http://www.hardwareheaven.com/mobility-radeon-drivers-support/186707-problems-installing-catalyst-co... Works fine now... J

• U2515H, 2560 x 1440 with ATI Mobility Radeon HD5145

  Hello

  I just got a DELL U2515H monitor. My laptop is an ASUS X52J, almost 5 years running with an ATI Mobility Radeon HD 5145 - 512 MB graphics card.

  The problem is that I can't get more than 2048 x 1152 on my monitor with HDMI port (my laptop doesn't have a port DP). It seems that my graphics card can deliver 2560 x 1440, but not with HDMI.

  I read in a post on this forum "active converters for HDMI DP video card to listen to there, but they are not resolution 2560."

  What do you think of it? It would solve my problem?

  http://www.Lindy.co.UK/audio-video-C2/converters-scalers-C105/video-C1511/HDMI-to-DisplayPort-converter-p7958

  Thanks (and sorry for my approximate English)

  You should check with the support of Asus.

• Problem with switching screens

  Hello, I have a problem with switching screens. Here is my code (both screens extends screen):

  SerializableAttribute public class Main extends UiApplication {}

  Private TrainLinkScreen trainLinkScreen;
  Private WorkingScreen workingScreen;
  private string;

  Public Shared Sub main (String [] args) {}
  new hand (.enterEventDispatcher ());
  }

  public Main() {}
  workingScreen = new WorkingScreen();
  pushScreen (workingScreen);

  try {}
  trainLinkScreen = new TrainLinkScreen();
  } catch (GpsException ex) {}
  message = ex.getMessage ();
  } catch (FileException ex) {}
  message = ex.getMessage ();
  }
  If (message! = null &! message.equals("")) {}
  invokeLater (new Runnable() {}

  public void run() {}
  Dialog.Alert (message);
  System.Exit (1);
  }
  });
  } else {}
  popScreen (workingScreen);
  pushScreen (trainLinkScreen);
  }
  }
  }

  The problem is that the workingScreen is not displayed. The download takes a little time, so I wanted to put here a screen like "I work, please wait...". ", but he appears, the unit freezes for a few seconds and then the trainLinkScreen appears. Could someone please write where is the problem? I tried invokeLater on the first screen, but it ends with the crash on popScreen (trainLinkScreen). I tried invokeLater on trycatch also block, but it does not work either. Help, please.

  Thank you. I already have the solution (I hope that ), I put to device gps location in a separate method (it's a small part of the code that does not have too much time to finish), she called before initialization and initialization in method invokeLater as a thread (the large part, too download from the internet). The display works perfectly in this way (in the first place, the "Download" screen appears and then comes the rest of the code) Although some other things seems to not work properly now

• AMD Radeon 7570-devices is not compatible with Windows 10 - you're going to have problems with your screen

  Microsoft will come out with Windows 10, as an upgrade of the free operating system next month, July 29, 2015. They came out with an app, 'Get Windows 10', which is intended to help the operating system upgrade process. In this app, it checks for compatibility issues that may exist between your computer and their new Windows 10.  I get results for two of compatibility issues when I run this app. The one that concerns me, it is with the video card that came with my computer, AMD Radeon HD 7570.

  The app tells me: "these devices are not completely compatible with Windows 10" and he adds "you will encounter problems with your screen."

  Is there any driver updates that resolve this problem?

  The driver, I installed on my pc is Advanced Micro Devices, Inc. version 8.960.11.2000

  Windows says that the driver is up-to-date.

  If no driver is available to correct this problem will be I need to replace the video card in my computer and if so with what?

  I currently use two screens, a LG 22EA53 (analog) and an Acer S230HL without any problems with Windows 7, Home Premium, Service Pack 1.

  Malygris1,

  Well, son of a gun... looks that microsoft has made changes in their updates.

  Now when you run the "'get 10 app Windows, check your PC ' it reads in devices..." "0 problems found."

  Looks like Microsoft do with last-minute changes, as you indicated, and others have mentioned about being patient on this matter, that they may (?) have addressed this problem.  Probably won't suddenly course up until the update is done.

  Guess for now, I have to score this as accept as a Solution.

• Satellite Pro L20-someone ' one can tell me if I have a problem with the screen?

  Hello

  I have a Pro L20 - PSL25E and I recently had problems with the screen, it was intermittently flickering/lose color and whiting almost (when the color fades white vertical lines begin to appear).
  This seemed to worsen after that I dropped it (only from about 2 feet off the ground, not a big drop).

  I thought that the sceen can go, but the performance of the laptop seems to be affected when this happens, the laptop started to run very slow (tracks mouse slowly, programs I clicked take ages to run and it freezes sometimes to stop flashing) that had me thinking that it might be a virus or performance problem.

  My screen, drivers are updated, I did a full scan with McAfee, ran a clear-up system and a Defrag.

  I was wondering if anyone knew if it seemed to be a problem with the connections of the screen and would need replacement or if it could be repaired or if it were a performance problem?

  Any help would be great thank you appreciate!
  Rebecca.

  Looks like the graphics chip has a problem, which I think is a motherboard replacement.

  You can get a quote for repair to an authorized service provider. There is a list of ASP on the Toshiba site.

• Re: Try to run in 256 colors with Ati Mobility Radeon HD2600 on e

  Hi, I need to run applications in 256 colors in 32-bit of Windows Vista. Right click and check in the properties to 256 colors do not work. Ati Mobility Radeon HD2600 properties, we can only choose between 16-bit color or 32-bit.

  You can support me a solution to my problem? Maybe a driver twisted?

  Thank you.

  Hello

  Vista disables the default 256 color mode, but if you right-click on the file, select Properties, then the Compatibility tab there should be
  an option to run in mode 256 colors, but I don't know if these settings in your system using 256 colors will fix the program.

  Since you´ve already tried, you can also try to install a virtual system like VMware and then install Win95/98 in VMware. Then it should work.

  Sorry, but I searched and find a solution to the couldn t. Maybe you should google on some microsoft sites to find a workaround... typing "256 colors Vista" should help.

  Greest

• Problem with the screen on IPAD curtain

  Hello

  I'm a bad psychic, and I have a problem with the screen curtain.

  A longitudinal of Voice Over, the screen curtain is automatically activate.

  Normally to turn it off, you must type three times with three fingers. Only on my IPAD when I type three times with three fingers is "saying that turns off or preach. Find it me impossible to disable the screen curtain when voiceover is active.

  The latest version of IOS 9.2.1 is installed.

  I reset the Ipad and nothing changes.

  Can someone help me?

  Thank you

  Is is possible that the zoom is also on your iPad? If this is the case, try to use a quadruple 3 finger tap to turn off screen curtain.

  If the zoom is not active, try:

  1. Possessing the sleep/wake and home button until the Apple logo appears or 15-20 seconds.
  2. If, you can't remove the curtain of the screen, I would advise you reset the settings of the iPad. Settings > general > reset > reset all settings. It will be his turn VoiceOver off, but then you can use iTunes to turn on VoiceOver. Voice-over should return without the curtain of the screen automatically active. IOS - Apple Support using accessibility features

  The of is it possible that zoom is also active your iPad? In this case, you must use a valve 3 quadruple finger pour disable the screen curtain.

  try if the zoom is not enabled:
  1. While holding the button market / sleep and home to ' to the Apple logo, or 15-20 seconds.
  2. If you still can't delete the screen curtain, I recommend to RESET the settings on the iPad. Settings > General > RESET > RESET all settings. This turns off VoiceOver, but you can then use iTunes to turn on VoiceOver. Back to turn voiceOver should without the curtain automatically active screen. Use IOS - Apple support accessibility features

  -AJ