T510 (4313CT) Dock with port serial db9?

Similar Questions

• Connect two displays high-resolution station dock with T400s

  Hello

  I would like to connect my two DELL 2709W monitors at my station dock with my T400s laptop but the dvi ports do not give me enough resolution. I need 1440 x 900 at the same time.

  Curretly I can get this resolution on one of my monitors via the single HDMI port, I have in the dock station.

  What can I do? Is there for example any graphics card external that I can buy to fix this problem? Or perhaps there is a direct solution?

  Thanks in advance.

  I don't think that the t400s is powerful enough to run two screens wuxga. (but you can check)

  http://shop.lenovo.com/SEUILibrary/controller/e/web/LenovoPortal/en_US/catalog.workflow:item.detail?... This would certainly work

• Can I activate my iphone online here with my serial number?

  Can I activate my iphone online here with my serial number?

  You don't need serial number of the phone to turn it on. You need to connect to the internet and your cellular carrier's network to activate. See this support document to help with the activation steps.  Start with the iPhone, iPad and iPod touch - Apple Support

• What someone can do with my serial number?

  What someone can do with my serial number?

  Check if you have the warranty. That's all. They cannot use it to access your data or follow your device, or something like that.

• Is it possible with the serial number of an Xserve to read the configuration and the year of production?

  Is it possible with the serial number of an Xserve to read the configuration and the year of production?

  This will show you the model and year: https://checkcoverage.apple.com/

  If a specific configuration (like the 1 TB disk instead of 500 GB for ex) will not be determined. You can only learn by starting the Xserve (or open and look into it.)

• Having problems with ports USB 3.0 in computer option H8 - 1010 T

  Well, I bought the option USB 3.0 ports on top of the computer on the computer mentioned in the Thread object and I have problems with them.

  I tried plugging USB 2.0 devices in these two ports to "test" to see if they work, yet I am not able to get them to work with USB 2.0 devices. USB 2.0 is not compatible with USB 3.0 ports? Or I'm doing something other 'evil' here?

  Unfortunately, I do not have a USB 3.0 device to plug USB 3.0 ports to make sure that it is certainly a problem with ports still.

  The device in question I've tried in the USB 3.0 ports is a Microsoft Wireless Mouse 6000 wireless receiver. If the ports are not connected correctly, I would have assumed that the wireless receiver would have "blown" when I plugged it in, but it still works very well.

  USB 2.0 devices are not compatible with USB 3.0 ports? I know that USB 3.0 devices are backward compatible with USB 2.0 ports (I have a friend who is in this situation), but I also thought that the opposite was supposed to be true as well. Am I wrong?

  @William

  Check out this thread, seems to be the same problem you are having.

  http://h30434.www3.HP.com/T5/desktop-hardware/USB-3-0-ports-on-Pavilion-HP8-1070t-not-working/m-p/792857/highlight/true#M35248

• I want to know if the ipad with this serial number DM * 5VJ if it still warranty

  I want to know if the ipad with this serial number DM * 5VJ if it still warranty...

  Watch: https://checkcoverage.apple.com/ca/en/

• How to activate the old Windows XP with new serial numbers?

  \How to activate the old Windows XP with new serial numbers?

  You use a retail disk you had?  If so, then the keys do not work due to the fact that they keys of volume.

• Problem with Port Forwarding (When PPTP is upward) in the WRT-160N

  Hello world!

  I'm looking for more help with Port Forwarding in my new Linksys router. I bought the daysago afew router and was pretty surprised when I discovered that there is no DD - WRT firmware is installed in it (the router was 100% NEW when I bought it). I downloaded latest firmware original and flashed Linksys file successfully.

  But I still have the problem (even that I was on DD - WRT firmware too) with the port forwarding for my DC ++ and Vuze (app from torrents): I wrote port forward for ports 49151 (for Vuze) and 4000 (for DC ++) to pass on to my desktop computer (IP 192.168.1.201) - I saw a post on this forum, that there could be a problem If you transfer to an IP address, which is within the local area of DHCP, so I forwarded to IP.201 (my local DHCPzone is 192.168.1.100-. 149) But does not forwardind (())

  What's wrong?

  My configuration:

  Router IP: 192.168.1.1

  PPTP (I my ISP)

  IP address: 192.168.226.127

  Default gateway: 192.168.226.2

  DNS 1: 192.168.1.1

  2 & 3 DNS: 0.0.0.0

  The IP address of the PPTP server: 192.168.226.2

  User name: *.

  Password: *.

  _____________________

  Simple Port Forwarding:

  Name of the external port application port internal protocol for IP address Enabled

  Vuze 49151 49151 times checked 192.168.1.201

  DC 4000 4000 checked two 192.168.1.201

  As you mentioned in your post that your ISP has provided you with a PPTP connection with an IP address: 192.x.x.x. The IP address that is provided by your ISP is in a private beach, and if you try to transfer all the ports on your router, it will not work, as long as your ISP modem is blocking this port. If you need get a public IP address from your ISP.

  As you get Private IP of your ISP, if this connection is called as NAT behind NAT and your Modem behaves like a router.

  So now you have 2 options, get the public IP address from your ISP or change the type of connection.

• A torn my sticker with the serial number. How to find the number of the whole installation?

  Best regards, tore my sticker with the serial number. I don't see the numbers. How to find the number of the whole installation?

  Original title: windows 7 sn

  Option 1:

  If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.

  Option 2:

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.

  Option 3:

  If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.

• Can fill us transitional attribute in the table with no serial like 1,2,3, etc.? And how?

  Mr President.

  Can fill us transitional attribute in the table with no serial like 1,2,3, etc.? And how?

  Concerning

  You want to show serial No. on the page for all the lines?

  Check once-

  Blog of Ashish Awasthi (Jdev/ADF): Add the serial number to the table of the ADF, column to auto-increment in the table to the ADF

  Actually transitional attribute loses its value when page refreshes or viewObject is not appropriate in this case if your use case is different, so please tell us

  Ashish

• EliteBook 840 G1 and 2013 UltraSlim Dock with dual only monitors Windows 8.1 no second monitor

  My company recently purchased HP EliteBook 840 G1 laptops with discrete graphics.  Alongside this, we use the Dock UltraSlim 2013 with dual monitors HP LV2311 connected using HP DisplayPort / DVI adapters.

  8.1 Windows displays only a single monitor, that the second monitor is not available.  I can try to cover both monitors for a resolution fo 3840 x 1080, but when I try to do just the display reverts to the poster in mirror.

  I can use the DisplayPort on the side of my laptop and just a single DisplayPort on the platform and the OS will see both monitors.

  Please advise, it is unnecessary to have a dock with double DisplayPorts which cannot display two monitors with them.

  Yes the problem really existed with the original HP driver and that Microsoft installs by default.  HP released a newer driver for 8.1.

• How to download Lightroom 6, version of the box with the serial number?

  Hi, I bought Lightroom 6 in a box with a serial number. I realized at the end that I Don t have any player put the drive... so what do I do now?

  I ve tried all links available on the Adobe´s Web site, but the only available suggestions are the "program" that I m not interested.

  I use iMac, latest version. Do I have to return my purchased copy or what?

  Helena

  Download it from to install Photoshop Lightroom

  Install, then enter the serial number that came with your package.

  Keep your box. Keep your serial number safe and very convenient in case of reinstall futures.

• I have a lightroom software 6. My mac has no dvd/cd slot and I want to download. I have the serial number. I can't find the option to download lr with a serial number

  My mac has no dvd/cd slot and I want to download. I have the serial number. I can't find the option to download lr with a serial number

  Hello

  Please visit the link below to download:

  Install Photoshop Lightroom

• I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  Download and install the trial version of Lightdroom CC.

  Then enter your serial number, follow these steps

  How to convert a trial CC 6 Lightroom Lightroom