Tab control: all objects in different tabs of the line

Similar Questions

• All my data have doubled and the lines are slightly compensation and overlapping. Unusable.

  All my data have doubled and the lines are slightly compensation and overlapping. Unusable. How to restore the distorted view course content?

  Hello Arnold,.

  A screenshot of the upper-left corner of your document could help the issue. Include as much as in the example below.

  If this section of the table does not display data "doubled and shifted", provide a second screenshot of a section of the same size, showing a sample of the data in question.

  Kind regards

  Barry

• Error: 1200416 formula to [staff] runtime error (line 0): impossible to assign [DOUBLE] objects of different length in the exercise of calcing the dimension to calculate the formula of Member

  Receive the below error message:

  Error: 1200416 formula for [AccountMemberName] (line 0) runtime error: could not assign [DOUBLE] objects of different length

  I added the following member formula to a dense account member name. {end: I created an account called S_BegBalance to contain the data for numbers codes.} For example, if S_BegBalance = 1, effective must be 1 for the whole year (January-December). If the balance S_Beg = 2, staff: Feb-district of Columbia, for S_BegBalance = 3, effective is Mar - Dec.

  Effective is a member (dense) S_BegBalance shop is also a dense Member store.

  [Please indicate why There getting worse this error? Can I take care of this with calc script only?]

  Aggregate and script to calc Calc the Member of the calc formula is:

  Fix ("FYxx", "script", "version")

  Fix (@LEVMBRS(Product,0), @LEVMBRS(Entities,0), @LEVMBRS(Region,0), @LEVMBRS(position,0))
  @DESCENDANTS ("AccountParentMember");
  ENDFIX

  DIM(Entities,Region,Position) CALC;

  ENDFIX

  Formula Member

  IF (@ISMBR ("Budget") AND @ISMBR ("1st Pass - Budget"))
  IF (@ISMBR ("FY14") AND ("S_BegBalance" == 1))
  @IDESC ("YearTotal") = "Downsizing" == 1;

  END IF

  IF (@ISMBR ("Budget") AND @ISMBR ("1st Pass - Budget"))
  IF (@ISMBR ("FY14") AND ("S_BegBalance" == 2))
  "Feb" = "Downsizing" == 1;
  'Mar' = 'Downsizing' == 1;
  @IDESC ("Q2") = "Downsizing" == 1;
  @IDESC ("Q3") = "Downsizing" == 1;
  @IDESC ("Q4") = "Downsizing" == 1;

  END IF

  ELSEIF (@ISMBR ("FY14") AND ("S_BegBalance" == 3))
  'Mar' = 'Downsizing' == 1;
  @IDESC ("Q2") = "Downsizing" == 1;
  @IDESC ("Q3") = "Downsizing" == 1;
  @IDESC ("Q4") = "Downsizing" == 1;

  ELSEIF (@ISMBR ("FY14") AND ("S_BegBalance" == 4))
  @IDESC ("Q2") = "Downsizing" == 1;
  @IDESC ("Q3") = "Downsizing" == 1;
  @IDESC ("Q4") = "Downsizing" == 1;

  ELSEIF (@ISMBR ("FY14") AND ("S_BegBalance" == 5))
  'May' = 'Membership' == 1;
  "Jun" = "Downsizing" == 1;
  @IDESC ("Q3") = "Downsizing" == 1;
  @IDESC ("Q4") = "Downsizing" == 1;

  ELSEIF (@ISMBR ("FY14") AND ("S_BegBalance" == 6))
  "Jun" = "Downsizing" == 1;
  @IDESC ("Q3") = "Downsizing" == 1;
  @IDESC ("Q4") = "Downsizing" == 1;

  ELSEIF (@ISMBR ("FY14") AND ("S_BegBalance" == 7))
  @IDESC ("Q3") = "Downsizing" == 1;
  @IDESC ("Q4") = "Downsizing" == 1;

  ELSEIF (@ISMBR ("FY14") AND ("S_BegBalance" == 8))
  "Aug" = "Downsizing" == 1;
  "Sep" = "Downsizing" == 1;
  @IDESC ("Q4") = "Downsizing" == 1;

  ELSEIF (@ISMBR ("FY14") AND ("S_BegBalance" == 9))
  "Sep" = "Downsizing" == 1;
  @IDESC ("Q4") = "Downsizing" == 1;

  ELSEIF (@ISMBR ("FY14") AND ("S_BegBalance" == 10))
  @IDESC ("Q4") = "Downsizing" == 1;

  ELSEIF (@ISMBR ("FY14") AND ("S_BegBalance" == 11))
  "Nov" = "Downsizing" == 1;
  'Dec' = 'Membership' == 1;

  ELSEIF (@ISMBR ("FY14") AND ("S_BegBalance" == 12))
  'Dec' = 'Membership' == 1;

  ENDIF

  I edited the formula to find out where is the error?

  IF (@ISMBR ("Budget") AND ("S_BegBalance" == 1) AND @ISMBR ("1st Pass - Budget") AND @ISMBR ("FY14"))
  @IDESC ("YearTotal") = "Downsizing" == 1;
  

  ENDIF

  IF (@ISMBR ("Budget") AND ("S_BegBalance" == 2) AND @ISMBR ("1st Pass - Budget") AND @ISMBR ("FY14"))
  @IDESC ("Q2") = "Downsizing" == 1;
  @IDESC ("Q3") = "Downsizing" == 1;
  @IDESC ("Q4") = "Downsizing" == 1;
  "Feb" = "Downsizing" == 1;
  'Mar' = 'Downsizing' == 1;

  ENDIF

  7e3ca589-4260-401d-ba03-77f60bdde99e wrote:

  I added the following member formula to a dense account member name. {end: I created an account called S_BegBalance to contain the data for numbers codes.} For example, if S_BegBalance = 1, effective must be 1 for the whole year (January-December). If the balance S_Beg = 2, staff: Feb-district of Columbia, for S_BegBalance = 3, effective is Mar - Dec.

  Effective is a member (dense) S_BegBalance shop is also a dense Member store.

  Assuming you enter value to BegBalance during Sun, we can write something like this:

  FIX (& VarYear, & VarScenario, & VarVersion)

  Fix (@LEVMBRS(Product,0), @LEVMBRS(Entities,0), @LEVMBRS(Region,0), @LEVMBRS(position,0))

  FIX(JAN:DEC)

  "Workforce".

  (

  IF ("BegBalance"-> "S_BegBalance" == 1))
  1;

  ENDIF

  )

  ENDFIX

  FIX(FEB:DEC)

  "Workforce".

  (

  IF ('BegBalance'-> 'S_BegBalance' == 2))
  1;

  ENDIF

  )

  ENDFIX

  FIX(MAR:DEC)

  "Workforce".

  (

  IF ('BegBalance'-> 'S_BegBalance' == 3))
  1;

  ENDIF

  )

  ENDFIX

  ENDFIX

  ENDFIX

  There may be many other ways of writing this is an optimized way!

• How can I define Shape object colors and thickness of the line in windows 7

  When I use my insert, ease the shape fill color is blue, I need it to be white. also the outline color is blue I need to be black with line 1 pt.

  Try this. I have Excel 2007 so it can vary between different versions...

  In Excel, and draw your desired shape.

  Right-click in the form, and then click

  In 'Fill' change the color of what you want.

  In the line of color changes the color of what you want

  In the line style change the width you want.

  Then click on your form should now be necessary.

  But now right click again in the form and click on 'set the form by default'.

  I think that all future forms in this journal will be the right color and line as required.

  There are many more details here - http://office.microsoft.com/en-us/excel-help/set-new-formatting-defaults-for-a-shape-or-text-box-HA010244963.aspx

  To set for future worksheets, you need to create/save a new template, see also - http://office.microsoft.com/en-us/excel-help/change-the-default-settings-for-lines-and-shapes-HA102749751.aspx?CTT=1

  It will be useful.

• The firefox button used to be on the left, with tabs lined up next to her to reach the top of the screen. The firefox button is now on its own, with tabs on the line below. It wastes a lot of space at the top of my screen, I can put it back how it was?

  Previously, the firefox button was upstairs on the left and tabs lined up beside him, so that reached the top of the tabs just to the top of the screen. Close/minimize etc. were at the top right.

  Two days ago it so that the firefox button is at the top left, close/minimize etc. are always in the top left, but now the tabs are on a line located underneath, leaving a space at the top where I can see through to the desktop. There is also a wider border than before, around the window of Firefox all, more space wasted.

  I have windows 7 on top of my desk quick links bar, now that firefox has left a void that is located above the tabs, it means that it is easier to accidentally hovering over the bar when changing tabs, it's awkward because it brings forward and disrupts the ability to quickly change tabs.

  You see the difference between a magnified window and a window "restored down." Click on the middle button in the upper right of the Firefox window, so that when you place the pointer over the button, it says 'Restore down' and a show of boxes double overlap.

• Matching color race for several objects of different colors at the same time

  Hi people,
  I was wondering if anyone knew a way to change the stroke color to match the fill color (or add a stroke color in the case of no current line) for several objects at the same time when the objects in question have a variety of different fill colors.
  I can't seem to find a way and doubt one exists, but maybe I missed something or there is a suitable script.
  Any help much appreciated.

  Thank you. !

  (With the help of: Illustrator CC 2014 for Mac)

  try this script,

  // matchStrokeToFillColor.jsx
  // carlos canto 07/01/2014
  // https://forums.adobe.com/thread/1511792
  
  function main(){
  
      var idoc = app.activeDocument;
      var sel = selection;
  
      for (a=0; a		   

• Hide various objects on different slides with the same tip Action

  I'm quite new to Captivate and because of that I'm fighting for the search feature, I need. I have a project of say 40 slides. On each slide, I have a button field on the left side guide and when clicked I have a window scroll from left to right, in the main frame of the window.

  Also on each slide is an object that displays specific information (usually in the form of text) with the previous buttons and following attached to it (its actually just a PNG image with the buttons "Previous" and "Next" with click boxes on them).

  The problem I have is when I click on the field guide that I want to hide this information object. I can easily do this in a tip for 1 slide action but when I want to the same tip action allows to always hide the information object of the current slide that I meet problems. If I was able to name objects of the same name is not a problem.

  The only "fast" solution I have is that each object information on each slide set to hide when I open the guide and then visible when I close the guide.

  Is their a better solution or does this supposed same matter?

  Thanks in advance

  Why you not time the objects for the rest of the project, always on top? In this case, you will have an ID (I recommend you even a group). BUT: This means that you cannot use boxes to click but must spend much more flexible form buttons.

  Why I like the shape buttons - Captivate 6! -Captivate Blog

  Apparently you are not familiar with the shared actions nor.

• Structure off the diagram deletes all objects contained in it after the removal of the structure.

  
  
  

• Cross tab / filter the lines of pivot

  Hello guys,.
  It's been a day and I can't understand how to filter PivotTables using RTF Model Designer in word.
  The web-page-builder has a filter function, but the RTF an it is missing from the menu. So I think there must be some scripts.
  I had up to now:
  <? If: cartype = 4? >
  <? end if? >
  but I don't know where to put it, I tried to place on each item but... no luck.
  Someone there done that before and can share the secret?

  Hi BIPuser,
  Finally, it worked. I added the following to the for each element.

  ----------
  
  ---------------------------
  

• How one properly installed more than one printer all-in-one (different) on the same pcr?

  Once installed 1 All in one printer, how one installs another printer all-in-one (different model) on the same computer without altering the first installation because all software are the same for each all-in-one printer, with the exception of different drivers linked to each different model all-in-one printer?

  Hello Boothkp,

  From what I can understand in your post, you are looking for a solution install several all in printers on one system, without causing problems during the first installation. This can be easy.

  Lets say you have 2 printer that both use the version 14 of the HP Solution Center software. Then, you install the first complete printer with all the software you want to use. The second installation, you just select the option 'Add printer' or 'Add features', this will add then the second printer in the current center solution without a conflict.

  In case this does not work, then please give more information on the model and the operating system you are working on.

  Kind regards

  Van Baardewijk

• How, in Illustrator CS5, select all objects with the three points (or nodes)?

  I'm fairly new to Illustrator, but it seems like it should be simple.  (It's trivial in CorelDraw X 4: after selecting an object with three knots, I go to Edition > search and replace > find objects > find objects that correspond to the currently selected object and navigate the menus left.)

  In Illustrator CS5, select options > identical do not seem to include the selection of all objects with the same number of nodes under the currently selected object.

  A double click on the magic wand tool also does not provide such an option.

  Thanks for any help.

  PS also useful would be knowing how to add other criteria to this search, for example, how to select all objects with three points * and * the current fill color.

  advictoriam,

  I'm afraid that you have better luck with the number of anchor Point.

• Probably something simple - lines/objects selected differently, now can't fill?

  I am new to Flash. Before, if I drew a line or something, it would be fair to the line and I could immediately change the shape. Now, there is a blue box surrounding it. I don't know what purpose serves him as a blue box. However, when this started, my filling has stopped working. I can fill a shape I drew by hand, but not when I use the online tool. I've included a screenshot of the blue box surrounding a line. I assured that all sections of form touch before attempting to fill. Does nothing. Help?

  

  You have the active object drawing mode. Select the line tool. Look to the bottom of the tools Panel and click the draw button to turn it off. Keyboard shortcut for this mode is J.

  Q

• Is anyway for anchored objects to still be top of the line?

  When I copy an object (say a picture) in InDesign with the tool move (V) selected and then paste it into the text sometimes it's above the line and sometimes it's online. Text wrapping seems to make no difference.

  When I copy an anchored object that is well above the line and the text flows around him and then somewhere paste it elsewhere in the text, it turns into inline. How can I get these always being above line instead of having to change all?

  Change one of them to be above the line (preferably the first time you anchor)

  With the anchored object in the desired position - go to object Styles and create an object for your anchored image style and apply it.

  Now, copy and paste the object to another location in the text.

• Using the same control appeal return of different tabs

  Hello

  I am fairly new to this bare with me for a second...

  I have a situation were I use several tabs with the same exact command buttons in each of them.  Given that the buttons have the same function I want to use the same reminder.  I understand that each TAB is considered as an expert group and has its own Panel of handle.

  My problem is I want the call to make the difference between the button OK of TAB1 and TAB2.  The handle Panel sent back, the call is (from what I can tell) the Panel handle for the tab which is great, but it doesn't have a constant right having at it in the header file.  How sure that TAB1 always has the Panel handle 2 and TAB2 has always handle Panel 3, etc...

  Example: When I click on OK in TAB1 handle Panel sent to the btnOK is = 2 recall.  If I click OK in TAB2 is the handful of Panel = 3.  I want to move to the OK button, but do not want to use hard coded in full.

  int CVICALLBACK btnOK (int command face, int, int event, void * callbackData, int eventData1, int eventData2)

  {

  switch (event)

  {

  case EVENT_COMMIT:

  switch () {}

  case 2:<----I don't="" want="" a="" number="" here="" but="" a="">

  "do this."

  case 3:

  "do this."

  };

  }

  return 0;

  }

  The easy solution would be to have a reminder for each of the buttons.  If it's the only way to go if it's what I'll do, but I am interested in what you think.

  Thank you!

  Hello

  I see at least three ways to get what you want.

  Solution A: depend on constant tab page name (as you can get it back by giving the handle from Panel)

  In the callback, insert this code:

  name char [64];

  GetPanelAttribute (name of Panel, ATTR_CONSTANT_NAME),
  If (! strcmp (name, PAGE1)) {}

  Code for the first page of the tab

  }

  Else if (! strcmp (name, PAGE2)) {}

  Code for the second tab page

  }

  ... code additional pages

  Solution B: based on the attributes of the tab

  int parent, index;

  GetPanelAttribute (Panel, ATT_PANEL_PARENT, & parent);

  GetActiveTabPage (parent, PANEL_TAB, &index);)

  switch (index) {}

  case 0:

  Code for the first page of the tab

  break;

  case 1:

  Code for the second tab page

  break;

  ... Add the code to additional pages

  }

  Solution c: use the callbackData for buttons

  This solution requires code in two different program sections

  * During the loading of the Panel with the tab control

  int pnlH;

  GetPanelHandleFromTabPage (Panel, PANEL_TAB, 0, &pnlH);)

  SetCtrlAttribute (pnlH, PAGE1_BUTTON, ATTR_CALLBACK_DATA, (void *) 1);

  GetPanelHandleFromTabPage (Panel, PANEL_TAB, 1, &pnlH);)

  SetCtrlAttribute (pnlH, PAGE2_BUTTON, ATTR_CALLBACK_DATA, (void *) 2);

  ... and so on

  * In the recall button

  switch (callbackData (int)) {}

  case 1:

  Code for the first page of the tab

  break;

  case 2:

  Code for the second tab page

  break;

  ... Add the code to additional pages

  }

• How to prevent the FF31 opening new window? I want to open all links in a new tab at the top of page.

  I think the following quote, below, for help on the page is my problem.

  I have a site that I use when I click on a link in the Web site it opens a new window with the tab down. In addition, when this happens, I lose the orange rectangle FireFox, bookmarks and navigation options. How can I define FF31 so that the link opens in a new tab, and I keep all my options? I use Classic theme restaurateur 1.2.3. I also note that, in the new window, I lose the ability to use some of the addons.

  I have two laptops and both are running FF31 and W7. One of them works perfectly and the other is having this problem. As far as I can tell they are both defined by the same. The only difference is that when I upgraded to FF31 they both had difference older versions of FireFox. I also read in the help forum that maybe I need to go back to FireFox 28 to accomplish what I am trying to accomplish.

  I noticed that when I'm going under: config that the version of FF that does not work unless options compared to the version that works. An example would be that the working version has 'browser.tabs.onTop' where, on the other computer laptop is missing.

  > > > open new windows in a new tab instead: this option controls whether links from other applications or from web pages which request to open them in a new window opens in a new window or a new tab in the most recent window.
  Note: If you have chosen to open pages in new tabs, Firefox will ignore this option and opens a new window from a link if the page author specified that the new window must have a specific size, because some pages cannot be displayed correctly to a specific size. < < <

  Thanks in advance for any help,
  Yeto

  You can override how the links are opened through the browser.link.open_newwindow.override preference.

  • http://KB.mozillazine.org/browser.link.open_newwindow
  • 1: active tab; 2: new window; 3: new tab;

  Use it for links opened via JavaScript.

  • http://KB.mozillazine.org/browser.link.open_newwindow.restriction

  See also:

  • http://KB.mozillazine.org/Prevent_websites_from_disabling_new_window_features