tab of the use of space for vSphere 6.0 disk...

Similar Questions

• Satellite Pro L300 - can I use the E partition space for other files

  the partition E drive HARD drive on my laptop is only 20% used.
  Can I use free space for storage of things like photos?

  Sure why not?
  You can do that I recommend to create a new folder called images and there you can store your files

  Welcome them

• In the use of space Audit why are my fonts such a large percentage of the total size of the file?

  In the use of space Audit why are my fonts such a large percentage of the total size of the file?

  4 MB of an interactive file 6 MB (71% of the total file size).

  I'm only using Verdana.

  In this case the problem is not one of the fields have the police other than Helvetica. All fields are buttons, and all use the Verdana font in their appearances (icons), as opposed to their labels (aka Legend). This is how InDesign works when it generates the appearance for the buttons. As a result, that Verdana is incorporated several times as a subset, more than 300 times, once by button. This includes a lot of overhead, so that you get the size of large file.

  It would be much smaller than that you need to add buttons in Acrobat, even if you've used Verdana. In this case, the entire police would get embedded, but only once. It would take more work, but the process can be automated, if you need to do this sort of thing a lot.

• What is the best color space for workflow photo where the goal is marketing and selling prints?

  What is the best color space for workflow photo where the goal is marketing and selling prints?

  The really important thing here is not work in the color space. The important thing is that you set up your calibration targets so they correspond to the document that you are printing on. This means that the white monitor should be a Visual match white paper and black monitor a match to the density of the ink max for the paper.

  But to answer the question - assuming that you print on an inkjet printer, Adobe RGB should cover most of what the printer can reproduce on a glossy paper of good quality. If you have or get a range wide screen you will also be able to see the range of the file to the screen and you can then test your profile to print with confidence that "what you see is what you get".

  Some will say that good inkjet reproduce some colors that are in fact outside the Adobe RGB, and so you have to work in ProPhoto. While technically true, this superior to Adobe RGB color range is very small and very limited and IMO a fairly minor concern.

• Making the best use of space for the quality by balancing the video bitrate and audio settings?

  I have a few questions about the first export still / encoding in encore. I am trying to create a dvd single layer, where I maximize overall quality using as much space as possible.  The video is 97 minutes, SD 720 x 480, 29.97 FPS and consists of interviews for the most part, as well as b-roll hd cameras and stills, rare title graphic card.

  1. I can use dynamic link to send the sequence that appears to maximize the space available, however I have heard that using DL is generally frowned upon and I myself cannot tell what settings it uses (for example vbr, 2 pass, etc.). Is my interpretation that DL is not the ideal way to go wrong? If DL is just as good as a separate output, is there a way to know what parameters it uses?

  2. I used a bitrate calculator and tried a Min: 3.5 target: 5.5 Max: 8 audio output PCM and I found myself having a little more than 400 MB of unused space. When someone recommended a Min: 5.5 target: 7 output Max 8.5 the file size is too large with a simple DVD layer. I read that it is recommended to use an exit instead of PCM, if the video is over an hour audio Dolby. My question is is it a best practice to balance needs of flow rates and audio and video? I realize, of course, by using more data PCM is 'better', but it is usually best to go on the road to dolby and have more space to increase your video bitrate? What is the audio difference type that requires a high-end system to discern? Y audio data loss is worth for the benefit of video bitrate higher?

  I know it's a lot, just trying to maximize space to get the best possible performance. Thanks for any help/advice you can provide.

  -Nick

  As most of my videos are closer to 2 hours usually, I always used Dolby Digital, PCM takes so much space and I prefer to use this space to increase video quality.

  Note that by default, if you import a .wav (PCM) file into Encore, it transcode automatically that Dolby, unless you have changed specifically the default settings of transcoding in Encore.

  A decent basis for coding rule is 560/minute = bitrate, so 560/97 = 5.77 and I usually just round off a little for menu overhead and margin of safety. This requires using Dolby to 192 k, so I would use 5.6 average bitrate.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Configuration of free filesystem disks for ASM? You can use free space for ASM

  Is there a way to devote space for ASM to create a database under the DSO?
  
  I was hoping I wouldn't have to reinstall the operating system Linux Enterprise 5 (Red Hat). So I uninstalled my environment RAC 2 nodes, installed required ASM RPM for Red Hat linux Enterprise 5 and then reinstall 11 g Clusterware and set "configure Automatic Storage Management (ASM).
  
  I missed something? Thank you

  Hello

  I recommend you to visit http://www.oracle.com/technology/pub/articles/wartak-rac-vm.html or http://www.oracle-base.com/articles/11g/OracleDB11gR1RACInstallationOnLinuxUsingNFS.php

  They are good examples to configure RAC

  In your example: you will only use ASM for DATDISK and OFRDISK.

• Use of space for a database...

  Hi Techies...
  
  Can someone give me a script to get the size of database...
  And also for a user (SCHEMA) in the database...?
  
  concerning
  Daffs

  Many people have different definitions of the size of a database. Among the options

  The size of the data files

  SELECT SUM(bytes)/1024/1024/1024 gb
    FROM dba_data_files
  

  The size of all the segments actually attributed to objects

  SELECT SUM(bytes)/1024/1024/1024 gb
    FROM dba_segments
  

  or the size of all data and temporary files

  SELECT SUM(bytes)/1024/1024/1024 gb
    FROM (
      SELECT bytes FROM dba_data_files
      UNION ALL
      SELECT bytes FROM dba_temp_files
    )
  

  You might also be interested in things like space for newspapers to restore archived redo logs, backups, etc., depending on why you ask the question.

  Similarly, there are different definitions of the size of a layout depending on what you are after. The most common would be

  SELECT SUM(bytes)/1024/1024/1024 gb
    FROM dba_segments
   WHERE owner = <>
  

  You might want to go further and to subtract the space allocated to the objects but not used (i.e. blocks empty or empty for the most part) using the DBMS_SPACE package.

  Justin

• The use of DAQmxWriteDigitalScalarU32 for write channels share the same ports?

  Hello

  I have a USB-6509 and NOR-DAQmx installed 15.5.1. Using the ANSI c api.

  Is it possible to create several independent channels that use different lines of the same port?

  DAQmxCreateTask("",&th1)

  DAQmxCreateDOChan(th1,"Dev1/line0:4","",DAQmx_Val_ChanForAllLines)

  DAQmxStartTask (th1)

  DAQmxCreateTask("",&th2)

  DAQmxCreateDOChan(th2,"Dev1/line5:9","",DAQmx_Val_ChanForAllLines)

  DAQmxStartTask (th2)

  ....

  and repeat for the following strings:

  Dev1 / line0:4
  Dev1 / line5:9
  Dev1 / line10:14
  Dev1 / line15:19
  Dev1 / line24:28
  Dev1 / line29:33

  So I can use DAQmxWriteDigitalScalarU32 to write to each task independently?

  for example:

  DAQmxWriteDigitalScalarU32 (th1, 1, 10, 0 x 1, NULL)

  DAQmxWriteDigitalScalarU32 (th2, 1, 10, 0 x 2, NULL)

  DAQmxWriteDigitalScalarU32 (th3, 1, 10, 0 x 3, NULL)

  ...

  DAQmxWriteDigitalScalarU32 (th6, 1, 10, 0 x 6, NULL)

  These tasks will interfere with each other because they use the same port, but are assigned different lines?

  If this isn't the case, I bits to the data, if the task/channel does not start at the Px.0 line?

  Thank you!

  Yes, as long as you use the same line on different channels, they must not interfere with each other for this reason, you can create a channel by line if you wish

  The reference to using the DAQmxWriteDigitalScalarU32 function:
  "A sample of the integer unsigned 32-bit unique, wrote to a task that contains a single digital output channel. "Use this format for devices with up to 32 lines per port.

  http://zone.NI.com/reference/en-XX/help/370471AC-01/daqmxcfunc/daqmxwritedigitalscalaru32/

  So yes, the DAQmxWriteDigitalScalarU32 can write on each task independently

• The use of Teamviewer for remote access to another PC from a PC

  Hello

  I have TWO PC, but unfortunately two PC has the same IP I checked ipconfig.

  I called ISP regarding on the same IP between two PCs.

  Is it possible that a PC can access second tool PC remotely using the Teamviewer software, even if TWO PC IP addresses are the same now?

  Your comments will be appreciated.

  Thank you

  Hi Altman,

  TeamViewer is a third party software. For support on the use of this product go to TeamViewer Support Center.

  Note:   software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• VCP5-VTC review managed after the end of training for vsphere 4. Certification reflects again. Help, please

  Hi gurus,

  I have VCP5-VTC review successfully completed on July 31, 2014. I have already certified VCA5-VTC, WM-VCA5, VCA5-Cloud

  I also attended Vsphre 4.1 training. Now my question is that I have not received my certification VCP5-VTC, so I contact ceriticition vmware support, said, must still complete the following prerequisites option 2

  2. If you are not a VCP level certified, but attended a class of qualification VCP4-VTC (VMware vSphere: install, configure, manage [V4.x], VMware vSphere: [V4.1] Bootcamp, VMware vSphere: Troubleshooting [V4.x], VMware vSphere: Advanced Fast Track [V4.x], VMware vSphere: Fast Track [V4.1] Automation),

  
  

  You must attend one of the following courses and the examination of the VCP5-VTC.
  -VMware vSphere: What's New [V5.x] (2 days, version with instructor)
  -VMware vSphere: install, configure, manage [V5.x].
  -VMware vSphere: optimize and scale [V5.x]
  -VMware vSphere: Fast Track [V5.x]
  -VMware vSphere: Troubleshooting workshop [V5.x]
  -VMware vSphere with operations management: Fast Track

  
  

  I would like to know how VMWare to approve my request for review with control of the pre - requisites.i past VCP510-VTC, will I get the certificate if I completed the required course [VMware vSphere: what's new [V5.x] training (two days, version with instructor)] or I have to retry the exam after completion of the training. Can any gurus here to respond? Feeling Disturbed.

  
  

  Moderator Note: locking of this discussion that you have asked the same question here: Re: authorization exam VCP5-VTC without CIM class

• Cannot open the web page in another tab of the browser in application for the custom shop page

  I have a custom stores html page and an external link (such as < a href = "...) (' > < / a >) in this html page.  Now when I type this external link, it opens the web page in the same container and crush the store custom html page. But I hope that it can open the external page in another tab of the browser in application with the button "close".   As this external link is in mode folio. Please let me know if I could do it. Thank you

  We do not support this with the current v2 API. We will be adding in release 27 support for this.

  Neil

• Use a locally swc file to optimize the use of bandwidth for an LMS

  Hello.

  I have an LMS (learning management system), which also uses elements of the virtual world as avatars, games with great graphics etc...

  Bandwidth here in Spain is bad to say the least. Games like world of warcraft ship a CD to put heavy graphics on your local hard drive. It would be a great idea for our e-learning system. Is the best way to use a CFC which is impossible to decompile? It would save a lot of headaches.

  Well, what I'm trying to ask is how can I protect our graphics piracy if installed on the pc local users.

  Thank you in advance.

  You may simply want DRM. Here are some links to check out:

  Documents from Adobe:

  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/FLA sh/net/drm/DRMManager.html

  The use of Adobe News:

  http://help.Adobe.com/en_US/AS3/dev/WSe3d2d52902616553-41317b6911d1b4b fb29 - 8000.html

  By the way, the images are data binary just so you can encrypt them with something fast like RC4, use a library, for example:

  https://code.Google.com/p/As3Crypto/

  Ultimately if someone REALLY wants your content, there is no 100% average hackproof. I would implement a reasonable attempt at DRM or encryption, but really measure against the performance hit you'll take to do, with the knowledge that you really cannot guarantee protection in any case.

• Impossible to uninstall bing. Not in "modules" in the "Control Panel programs. I have renounced the use of Firefox for this reason.

  My search bar presents Google as my default search engine. However, whenever I write something in the address bar, the result is bing.com. I was looking for help in several places. I tried all the solutions, including Microsoft Live Essentials uninstall. I have looked for the Bing bar, search in the system toolbar. Not found anywhere in my system. I stopeed using Firefox and passed to another Mozilla product. The problem is to impose something without permission.

  Hey! Got the answer. He was driving my CRAZY
  http://www.ehow.com/how_5196325_remove-Firefox-work-way-used.html
  works like a charm!

• The use of DaqMX for reading the State of 2503 PXI or PXI-2527 switch

  I was wondering if there was a way to non-destructive know what that setting of the State. I'm working on some diagnostic software to be run along the side of our tests, and it would be really useful to be able to know what each of the channels are switches are currently connected to.

  In c#, I use this to actually set the channel-

  DaqSystem.Local.ConnectSwitchChannels (channel 1, canal2, true);

  but have not actually been able to find something on because what channels is currently defined. I found this.

  DaqSystem.Local.CreateSwitchScanTask

  but I'm not sure it's what I want to do.

  Any advice?

  Thank you!

  Hi Joel,

  I believe that this is the function you're looking for.

  

  Help OR switches can be found in the start menu, National Instruments, OR-Switch and Documentation.

  Thanks for the question!

  Lisa

• people will be banned for the use of mods for drunk dark on pc?

  I was watching to see if it is safe (by safe I mean may not be ban for it) to use the mod for drunk dark on pc. But I don't know if this is a ban or not. I would use the mod 60 fps, but I won't use it if I can be ban for her.

  Hello Brian,.

  Thanks for the reply.

  You can contact games for Live Support.

  http://support.Xbox.com/en-us/browse?product=games&category=PC-games

  http://forums.Xbox.com/GFW/technical_support/f/253/t/8569.aspx

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.