Table, CommandToolbarButton, control flow

Similar Questions

• How to call java class/method control-flow-case

  Hello everyone, I'm newbie...
  I have little problem managing about control-flow-case adfc-file config.Xml. in this case i'want to call control-flow-case of java class/method (manage-bean)
  
  If someone help me solve this problem...?
  
  THX cordially
  agungdmt...: D

  If you have the control-flow-case defined between Page1.jspx to Page2.jspx as "goToPage2."
  You can use the code snippet in the bean managed in Page1.jspx

  FacesContext context = FacesContext.getCurrentInstance ();
  context.getApplication () .getNavigationHandler () .handleNavigation (context,
  NULL,
  "goToPage2");

  Thank you
  Nini

• Table of contents flowing to multiple pages

  Is there a way to get the table of contents flowing to several pages on the fly?

  I have a project where the Table of contents will be certainly several pages, but the content will be different per pound, so I don't know how many pages the TOC will be until the work is set up at the end.  Since the merger is done programmatically, the best thing would be to set up the FAKE text object if flow dynamically as he had a variable in it, but since it doesn't have a normal variable, the possibility to sell the document does not appear.  For any help or suggestion would be greatly appreciated.

  Thanks for looking,

  J

  I had problems with several tables of contents of page before

  I had my OCD set up as a master page with linked text boxes

  Meetings with only a text frame (IE table of contents page), there is no problem

  But when OCD runs through two - y

  Solution has been to remove the second image - update the table of contents and then create a new text related to the first frame

  the content must flow in

  It may be useful

• Page fragment bounded-task-Flow Control Flow Help

  jDeveloper: 11.1.1.0.2
  
  I have a question to try to understand the correct way to use control flow case between a bounded-task-flow with fragments of page and a page without limits-task-flow. We have taken the approach of our application to have some shell / container pages to host bounded task flows composed of fragments of page to facilitate the reuse and accelerate development. There are 4 or 5 pages of shell on the unlimited-task-flow applications. From now on, we have about 20 fragments of page that are implemented as a bounded flow task. These fragments don't do much now, which means there is only a single fragment in each delimited-task-flow. The question that I'm going to try to call action from navigation to control flow of one of the fragments to load a page another shell.
  
  For example, shellPage1.jspx contains fragment-flow-1 as a region. In my adfc-config I have shellPage1.jspx and shellPage2.jspx, with the case of 'toShell1' and 'toShell2' control flow, respectively linking two pages. I have a link action related to the 'toShell2' in the fragment that make up fragment-flow-1. When the application is run, shellPage1.jspx and its fragment are displayed. But clicking on the link in the fragment ("toShell2") do absolutely nothing. This not me access the shellPage2.jspx as expected. What I do wrong here or do not understand?
  
  If the fragment is included as include a JSP page, and not a narrow-minded, all workflow works as expected. This is not desirable, as we then need to copy the fragment pageDef in pageDef of the shellPage to get the DataControls function.
  If the faces - config.xml is used instead, and a case of JSF navigation is used, it also works as expected. This is not desirable because we really do want to be mixing adcf-config and faces-config.
  
  So I am really puzzled here... Thanks in advance!

  Hello:
  In your case, the adfc - config.xml has the case of flow control between the pages of the shell. And the task-flow - N.xml or yours-task - flow.xml for each default page fragment does not inherit control flow of the page containing the shell case. In your case, in the task of page fragment - flow.xml, you must add a "Parent Action' to sink to shell page2 for example. The result of 'Parent Action' would be 'toShell2' If you call ShellPage1 page fragment.
  Is it 'OK' or 'Useful' for you? Please mark it as if it does.
  Good luck

  Alex

• How to add examples of control flow in the bean to support?

  Hi all
  I use a template for all my jspx pages in my application. This model provides a header which includes the menu of the page all the others. So when I click on a menu it will redirect to the related page. But my problem is that there are so many cases of Flow Control adfc-config.Xml file. For example, 64 cases of control flow must be if there are 8 menus. How can I when a user has clicked on a menu, the case of control flow will be created in the CommandMenu action method?
  Thank you

  Hello

  No you don, t, you can use rules of global control flow, simply do not define the "of-activity-id". Then, if the result occurs, where he come, the user will be moved to the target activity id. 8 pages should probably be 8 control-flow-case within a single global-flow-control rule.

  Kind regards

  ~ Simon

• "af:commandButton" action is not running 'control-flow-box.

  Hello
  
  I have the following problem. All the 'af:commandButton' action in my application does not run "control-flow-box" in a "unbound the workflow.
  I decided to use the workflow when I needed the "bookmark" function (previously I was using only the rules of navigation in faces-config. (XML).
  
  So I decided to create a new test project "App 1"
  
  (1) create "Fusion Web Application"
  (2) create 'unbounded task flow' with 2 views (View1 and view2)
  (3) create 2 "case of control flow" cases (flow available1 and flow2)
  (4) double click on in the designer to create View1 (page based on "Oracle three columns")
  (5) double click on in the designer to create view2 (page based on "Oracle three columns")
  (6) add "af:commandButton" on each page and used available1 flows and the flow2 for action
  
  When I deploy the application on the development server 'af:commandButton' action will not run "control-flow-case".
  When I deploy the application on the JdevBuiltInServer the 'af:commandButton' action will run 'control-flow-cases '.
  When I deploy the application to the JdevBuiltInServer or the server development with only the rules of navigation in faces - config.xm, the 'af:commandButton' action will run "control-flow-box.
  
  
  These problems also occur when I deplloy this simple application on a new of:
  Oracle WebLogic Server 11g Release 1 (10.3.2) - net_oepe111130_wls1032_win32
  Oracle JDeveloper 11 g (11.1.1.2.0) - jdevstudio11112install
  
  
  Thanks Maurice
  
  
  -----
  Oracle JDeveloper 11g Release 1 11.1.1.2.0
  Studio Edition Version 11.1.1.2.0
  Build JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536
  Copyright © 1997, 2009, Oracle and/or its affiliates. All rights reserved.
  The IDE version: 11.1.1.2.36.55.36
  Product ID: oracle.jdeveloper
  Product version: 11.1.1.2.36.55.36
  
  Version
  -------
  Version of the component
  =========     =======
  11.1.1.55.36 ADF business components
  Java (TM) Platform 1.6.0_14
  Oracle IDE 11.1.1.2.36.55.36
  Support versioning 11.1.1.2.36.55.36

  Check the URL that you use to launch the application. If the URL contains .jspx you see just the jspx file and no navigation will work. For the workflow, you need to start the application using an activity ID (normally, the name of the page without the jspx anding).

  http://127.0.0.1:7101/otnapp-ViewController-context-root/faces/DepartmentList
  

  Having to extend the server of deplyoment (not the one built-in) with libraries of the adf?

  Timo

• difference between control flow and check knowledge module

  Hello

  I know ckm and flow control. What is the main difference between the Frother and CKM?

  CKM is the model of knowledge that ODI will use to check all the constraints you create.

  Flow control is the way to a check constraint during the flow of an interface (it's way happens to you in your integration tables [temporary]). This method deletes the data of 'bad' and it will record in a table of $ E. Also, you have some option to recycle errors (next ODI run will try to reuse these data)

  Static control is another way to check your constraints. This is static as its name suggests and is average, it will only count the errors, but it won't do anything with the data. It might happens in the source tables.

  The most used method is the regulator of throughput with certainty, but static electricity has some advantages too.

  For example, flow control has only a little when you check duplicate data. When he found it eliminated the two registry (or more if there are more). It's average, you get nothing in the end.

  You can use the static control to check your sorce tables and create a process to eliminate or filter duplicate data, allowing only data duplicated to cross.

  Hope this can help you.

• Table of control to display and edit.

  I am display text based on that button an is pressed. Right now I use a table control. I also use a shift register to hold the displayed data. It is on a while loop. Works very well. Now, I want the user to be able to change the text to the screen, but obviously the exception after the text in the cell is changed, it is immediately crushed by the shift register data. Just cannot get my head around a solution. How would a senario like that usually applied.

  Still struggling with this problem.

  I can make it work if there is only a set of buttons, but Terminal concat strings cause problems wherever I place

  Small diagram attached

• Remove several rows of table/list control

  Hello

  I want to have a table control into which a user can enter different entries, like this:

  

  My program would read each entry at a time and do something.

  However, I want to give the user's ability to delete multiple entries at once, as in an Excel POSt - in other words, the user selects multiple lines and press the 'DELETE' key, and these entries are deleted. The table of Labview does not allow this it seems - I can only remove an entry at the same time - or I have to right click and select operations on the data-> Cut Data, which is awkward.

  Is there a control best fits what I want to do? I tried a Llist control, but it behaves in the same way.

  Thanks in advance!

  You can write your own routine.  Use a Structure of the event to a key event down.  If the key has been pressed and that the table has focus, delete the selected items.

• Help to insert data in table chain control

  Hello world

  I'm trying to insert 2 chain control data in a table. I had to insert 1 control of the string in a table data, but when I try to add 1 chain control, it doesn't work. You guys could help me?

  Thank you

  I think that's what is wanted... to add data to a table. Only problem is that it is an an indicator of control so this example may require changes slightly if the user needs a control. If you don't want the user to enter anything, this method should work. The function used is insert into table

  

• Visible data in a 2D table but not in the Table connected control

  In the attached drawing, you will see that I take control of Table in table form, change the items to help replace a subset of table and then return the resulting table in the Table control.

  I can see my data in "Table of output" and a probe on this thread, but my Table control is empty.  The Table control is 10 columns of 50 lines.

  Can someone tell me why there is no data for the Table control?

  Please do not ask I post the VI because it is big, ugly and not mine to post.

  I can't believe.

  I couldn't see the data because it was out-of-frame.  My Control Panel flashed down a 30 line window and my data was in the first line only.

• "Question of possible priority with the operator to control flow.

  Hi guys

  I have the following problem:

  Yesterday, I did an upgrade from debian wheezy distribution Debian jessie.

  Since then, I had a problem with a plugin which I use for Icinga a surveillance system.

  When I run it, I got the error that there is a 'undefined subroutine.

  I read on google that I can fix it, with resettlement vsphere SDK, but the installation blocked to "CPAN is to download and install the pre-requisites Perl module"SOAP::Lite.

  Can I skip this step with Ctrl + C, and at the end he says «this Setup program has installed successfully...» ».

  
  

  But when I run the Plugin I get the error message 'problem priority Possible with operator control in the /usr/share/perl/5.20/VMware/VICommon.pm line flow 2147' and the whole stucks plugin.

  I tried the next step that I found in this forum and the error message does not appear, but the stucks again plugin...

  Re: VMware-vSphere-Perl-SDK-5.5.0-1384587 broke up with perl 5.20

  I also have Perl 5.20.2...

  Can you guys help me?

  Vinzenz

  OK I could fix it...

  I changed the line 2147

  "

  return (meaning $user_agent-> cookie_jar and)

  $user_agent->-> as_string cookie_jar don't ");

  "

  And this time I waited for a long time and I get an error message that there is a problem with the SOAP.

  The solution was to downgrade Net-HTTP and libwww-perl with the following commands:

  Perl - MCPAN-e shell

  o conf urllist push http://backpan.perl.org

  install GAAS/Net-HTTP-6.03.tar.gz

  install www-perl-6.03-tar.gz GAAS/lib

  The second command loads the old versions of the urllist.

  Thx for your help and I hope that I can help others with the same problem.

  Vinzenz

• Detail table data control not insert data

  Hello

  I use JDev 11.1.2.4 and fusion web application, I have 2 main table and, when I run APP module and insert data in the table in detail its registered successfully, but when I drag the VO of the data control to af:form some data and other will be null.

  Any suggestion?

  Concerning

  Finally I found the solution

  https://forums.Oracle.com/message/10493807

• control flow case to return from any page by page to boot!

  I need to use a link to the Image to the Master Page to go to the "Start Page". but when I use the case of flow of control do not work.
  How can I assign a case of flow of control in a master page?
  
  My version of djeveloper is 11.1.2.3

  You must define what you mean by the master page and the start page. There are two pages on the same stream of conversation?
  What do you mean by "navigation is not working? You get an error?

  Normally, you implement a wild-card navigation that points to the start page. This navigation that you use as the target for the link of the image.
  Please send your link to the image code.

  Timo

• Control flow Essbase

  Hello
  
  I am trying to build a business rule that will run when you save a form of planning.
  
  For functional reasons, the script code must be run if certain conditions are met (ie: Member of the page is to a descendant of a member)
  
  I checked the docs and exclusion orders could do the trick but I can't use it on business rules, and orders IF ELSE can only control the flow of the member formulas.
  
  If I was in control of flow of a sequence, then I could choose a different business rule to be run from a certain point, but there is no option for this as far as I know.
  
  I added a bit of code below to provide a good example of what I want to do, any ideas are welcome :)
  
  Concerning
  
  -----
  SET CREATENONMISSINGBLK
  SET AGGMISSG
  
  / * DISTRIBUTED POR DADOS POR ENTITY, CHANNEL ADD RAMO E LOB * /.
  
  FIX (& YearOrc, & ActiveVersion)
  FIX (ScenarioEstimado, ScenarioOrc, & ScenarioOrcN1, & ScenarioOrcN2, & ScenarioOrcN3)
  
  
  * - CELA MUST EXECUTE ONLY if [Ramo] IS a DESCENDANT OF MEMBER RNVIDA-*.
  Fix ([RAMO], [channel], [Entidade])
  FIX (@IDESCENDANTS ("FRAC"))
  %PR_37_Dist_LoB_FRAC()
  ENDFIX +.
  FIX (NA) +.
  %PR_38_Dist_LoB_NA()
  ENDFIX
  ENDFIX
  --------------------------------------------------------------------------------------------------------------------------------------------
  
  / * Pela add Dimensão Entidade * /.
  DIFFICULTY ("NA", @IDESCENDANTS("FRAC"))
  Fix ([RAMO])
  Fix ([channel])
  Fix (BegBalance)
  FIX (APNOPRSF, APNOPR, NOAN, PRNOPR, NOAPCA, APCAA, APAN, APAN_INP, APCDA, CAIP, PSNOPR, REANPR, ANUPAN, ANUCON, PRCONT, PRADQN, PRADQC, PRESSAC_COS, PRADQRAC)
  @Ancestors ([Entidade],-2);
  ENDFIX
  ENDFIX
  ENDFIX
  ENDFIX
  ENDFIX
  
  / * Pela add Dimensão channel * /.
  
  DIFFICULTY ("NA", @IDESCENDANTS("FRAC"))
  Fix ([RAMO])
  Fix (@IANCESTORS ([Entidade],-2))
  Fix (BegBalance)
  FIX (APNOPRSF, APNOPR, NOAN, PRNOPR, NOAPCA, APCAA, APAN, APAN_INP, APCDA, CAIP, PSNOPR, REANPR, ANUPAN, ANUCON, PRCONT, PRADQN, PRADQC, PRESSAC_COS, PRADQRAC)
  @ALLANCESTORS ([channel]);
  ENDFIX
  ENDFIX
  ENDFIX
  ENDFIX
  ENDFIX
  
  / * Pela add Dimensão business line * /.
  
  DIFFICULTY ("NA", @IDESCENDANTS("FRAC"))
  Fix (@IANCESTORS ([Entidade],-2))
  DIFFICULTY ([channel], @REMOVE (@ALLANCESTORS ([channel]), 'Channel'))
  Fix (BegBalance)
  FIX (APNOPRSF, APNOPR, NOAN, PRNOPR, NOAPCA, APCAA, APAN, APAN_INP, APCDA, CAIP, PSNOPR, REANPR, ANUPAN, ANUCON, PRCONT, PRADQN, PRADQC, PRESSAC_COS, PRADQRAC)
  @RSIBLINGS ([Ramo]); *-> This should work only if [Ramo] is Descendant of RNVIDA *.
  @ANCESTORS ([Ramo]); *-> This should run only if [Ramo] is NOT descending from RNVIDA *.
  
  ENDFIX
  ENDFIX
  ENDFIX
  ENDFIX
  ENDFIX
  
  
  / * ENTITY, e CHANNEL LOB POR DADOS AGREGACAO FIM * /.
  ENDFIX
  ENDFIX
  -----

  Will you be KScope? I will give a presentation on how to do it. I can also he will discuss with you offline if you are there.

  Kind regards
  Robb Salzmann