Table metadata for service operations, services, managers of opration of service

Similar Questions

• another name for service console

  What is another name for service console?

  can someone let me know the right answer...

  Thanks in advance

  Rajesh reddy

  COS?  (Console operating system)

  It is based of RHEL

• How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  As far as I KNOW, the serial number of the MacBook does not have the serial number of the processor.

• I am trying to reinstall windows xp from disk but it only gets up to this request then for service pack 1 disc when I press on enter I get the file 'asms' on windows xp pro Service Pack1 necessary

  I am trying to reinstall windows xp from disk but it only gets up to this request then for service pack 1 disc when I press on enter I get the file 'asms' on windows xp pro service pack 1 cd needed someone had this problem and managed to solve it thanks a lot

  Hello

  Thanks for joining us on the Microsoft Community.

  According to the description of the problem you are facing problems with reinstalling Windows XP Professional, and you are to be invited to insert the Service Pack 1 drive to complete the installation.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. did you uninstall Windows XP Service Pack 1 prior to reinstalling Windows XP?

  2. what was the installed Service Pack earlier?

  You may need to uninstall Windows XP Service Pack 1 first and then perform the reinstallation of Windows XP and to check if the installation goes smoothly.

  Please see the following articles for more information about uninstalling Windows XP Service Pack 1:

  How to manually remove Windows XP Service Pack 1

  http://support.Microsoft.com/kb/329015

   

  How to remove folders from Windows XP Service Pack 1

  http://support.Microsoft.com/kb/329260?WA=wsignin1.0

  Hope this information helps. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• How can I have an e-mail address hot if I ever sign up for service

  How can I have an e-mail address hot if I ever sign up for service

  Hello

  I would recommend you to ost your question on the forums of Hotmail.
  Here is the link:
  http://windowslivehelp.com/product.aspx?ProductID=1

  I hope this helps.

• How can I have an e-mail address hot if I have never signed up for service.

  How can I have an e-mail address hot if I have never signed up for service.

  You have a. You need a poster in this forum.

• Vista computer set for automatic updates, but I notioce 4 updated for service pack 1 and to be told that someone else is waiting. But I can't get service pack 2

  Vista computer set for automatic updates, but I notioce 4 updated for service pack 1 and to be told that someone else is waiting. But I cannoget service pack 2

  Hello Murphy,

  Thanks for posting your query in Microsoft Community.

  Unfortunately, the question is not clear, please answer these questions so that we can understand the problem and help you better.

  1. what day you're talking about?

  2. are you referring to Windows Vista Service Pack 1 and 2?

  3. are you an error message during the installation of the update?

  4 have had any changes made to the computer before the show?

  Please provide more information on this issue to get help.

• Windows Vista 64B for Service Pack 2 failed to start

  I've updated Windows Vista 64 b for Service Pack 2 and I get a blue screen when I start my Dell Labtop. Windows Vista automatic updates to phase 2, and automatic restarting leads to a blue screen again. After continuing in Mode safe mode with networking, stage 3 is installed automatically. Message: update not correctly configured back shanges. A new cycle with automatically updates configuration. When restarting a meesage appears: Windows failed to install the important updates. Start the computer again, the message is: Windows has recovered from unexpected shutdown. Windows can check for a solution of the problem. I check the box and Windows plans an another automatic update which leads new blue screen. How can I get out of this loop? Service Pack 2 does not work for me. Emil

  I don't have a system restore function on my computer.

  The problem seems to have been resolved by replacing the video driver that has been done by Mrs support. So far, the automated configuration update has worked and no new boot failure took place.

• "HOST PRECESS FOR SERVICES ARE WINDOWS HAS STOPPED WORKING" THIS MSG TO POSTER AT STARUP WINDOWS

  "HOST PRECESS FOR"HOST PRECESS FOR SERVICES ARE WINDOWS HAS STOPPED WORKING"THIS MSG TO POSTER AT STARUP WINDOWS.

  WHAT THEN THIS WINDOW WILL STOP APPEARING?

  Hi yogesh,

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, you get a boot error message.

  This problem may occur if there are incorrect settings in Task Scheduler.

  Perform the steps mentioned below and see if it helps.

  a: Start Task Scheduler type in the search box and click on enter.

  b: Expand and go to the Task Scheduler Library -> Microsoft -> Windows -> CARS.

  c: Click the View menuand then enable Show hidden tasks (so that a check mark appears next to it).

  d: Right click RACTask (Windows 7), and select disable so that the status appears as disabled.

  Answer to us if you are having problems with the message error starting or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• "You are not eligible to use this product or service because of the eligibility requirements for service.

  I installed the software adope and created adope creation of ID after registering the software it is showing the following error message

  " ACCESS DENIED"-YOU ARE NOT ELIGIBLE to USE THIS PRODUCT OR SERVICE because of THE eligibility REQUIREMENTS for SERVICE ' '.

  Try error: "cannot use creative cloud services | Adobe Creative Cloud desktop app

• What is the cause of the message "Waiting for Service ' Console CVD activity

  I have two related questions.

  basis, I just started centralizing 200 computers ish, all except 2 appears fine, 2 questions, one below and another with VSS errors.  This message is just for the question "in waiting for the Service.

  1. What is the cause of the message "Waiting for Service ' Console CVD activity and is there anywhere that documents these meanings of status.
  2. No idea where I should start troubleshooting the message "Waiting for Service ' I get to the computer below.

  I have a computer with this status which comes to have installed the client and will not be to centralize.  Other computers seem to work properly (centralized).

  The computer is to ping requests, but appears as disconnected in the console.

  I deleted the CVD and restarted the centralization CVD using a different policy on a different volume without change.

  Journal of the history of CVD below

  Description of the Type of weather

  31/01/2014-08:52:32 AUDIT_EVENT assign device, device: PC30866 (1995), cardiovascular disease: 11614, political CVD: don't Default - every 4hrs - no drive D (1.1)

  02/05/2014-13:53:58 politics AUDIT_EVENT assign CVD, CVD: PC30866 (11614), CVD policy: Migration Post-quotidien (1.0)

  31/01/2014 General Office EVENT 20:44:46 service error

  31/01/2014 General Office service EVENT 17:39:04 error

  31/01/2014 14:44:34 EVENT has not finished downloading, internal error, exception attached

  31/01/2014 General error from the EVENT 13:05:15 service office

  31/01/2014-12:30:37 TRANSACTION_START PC30866 - centralize endpoint

  the transaction log has an inscription mentioning a failure (not sure if it is the server or PC related) disc.

  Diseases cardiovascular diseases cardiovascular name Type State layer size (MB) data transferred (MB) branch reflector savings start time end time transfer (MB)

  Of the endpoint PC30866 centralize 11614 reading disc failed 169648 1531 0 31/01/2014 12:30:37 05 d 04:16:52

  The next event is in the application event log and the Mirage event log for the failed computer. (there were not all other errors in the paper since the deployment of mirage customer and there is no errors in the system event log)

  Event type: error
  Event source: VMware Horizon Mirage customer
  Event category: no
  Event ID: 0
  Date: 31/01/2014
  Time: 20:44:46
  User: n/a
  Computer: PC30866
  Description:
  Error general service office
  Unexpected exception taken (sender Name:Wanova.Desktop.Service.exe
  There is no policy context.
  , the object exception System.OutOfMemoryException: Exception of type 'System.OutOfMemoryException' was thrown.
  System.Collections.Generic.List to ' 1.set_Capacity (Int32 value)
  System.Collections.Generic.List to ' 1.EnsureCapacity (Int32 min)
  to System.Collections.Generic.List' 1. Add (T item)
  at Wanova.Net.DataTransfer.TransferStreams.SignatureResponseStream.ProcessChunk (ChunkInfo chunkInfo)
  at Wanova.Net.DataTransfer.TransferStreams.ChunkInfoDecodingStream.BeginWrite (Byte [] buffer, TransferStreamWriteCallback onWriteComplete)
  at Wanova.Net.DataTransfer.DataHandler.ExecuteDataStreamTask (DataHandlerExecutionTask task, MarkCompletionCallback markCompletionCallback)
  at Wanova.Net.DataTransfer.DataHandler.ExecuteTask (IExecutionTask task, MarkCompletionCallback markCompletionCallback)
  Wanova.Net.DataTransfer.ExecutionController.QueueListener (Group IExecutionTask)
  to Wanova.Common.ThreadUtils.ParamaterizedWorkItem'1.Run (object fakeParam)
  at System.Threading.QueueUserWorkItemCallback.WaitCallback_Context (Object state)
  at System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
  at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem)
  at System.Threading.ThreadPoolWorkQueue.Dispatch)
  at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback (), ends at True)

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  It turns out that this computer seems to have hard drive errors, so not a matter of mirage.

• How to create a PO for service

  Hi all
  
  Can someone please help me how to create a purchase order for services and what is the process, after you create a PO for service have we need also receive.
  do we need to set an item in the inventory as a service? I'm very confused, please help me...

  Hi Ajay,

  You can deal with services even without purchase of Services module as you may/may-not create an element.

  If you don't want to create an item, and then enter the details of the service in the description of the object of the purchase order online for an item category.

  Finally receive once the service is provided.

  Thank you

  PS.

• How to get the metadata for the selected tables of a schema

  Hello
  
  I need the metadata for the tables selected for an activity. The list of the table continues to change now. I get the list of tables just before the activity.
  
  What I need is to know how to put the list of tables in the sub query dynamicallly
  
  +++++++++++
  exec dbms_metadata.set_transform_param (DBMS_METADATA. False SESSION_TRANSFORM, 'SEGMENT_ATTRIBUTES',);
  exec dbms_metadata.set_transform_param (DBMS_METADATA. False SESSION_TRANSFORM, 'STORAGE',);
  exec dbms_metadata.set_transform_param (DBMS_METADATA. SESSION_TRANSFORM, 'TABLESPACE', TRUE);
  
  Select DBMS_METADATA. GET_DDL ('TABLE', '&') from user_tables where rownum < 2;
  +++++++++++
  
  What I need is something of the form where table_name in (< table1 >, < table2 >, < table3 >,..., etc.) in the query above, so that i access all the metadata
  He doesn't hit me how I can write this query to single line. Can someone help here?
  
  Regds,
  Malika

  Hello

  try using the name of the column to user_tables and owner of the table in the "DBMS_METADATA. GET_DDL' and the reel to reel for some files and run this file in turn exit.

  coil
  Select ' select DBMS_METADATA. GET_DDL ("' TABLE," ' | table_name |', "' ) double;' from user_tables
  where ;
  spool off;

  @some_file - trying to spool output too.

  -Pavan Kumar N

• HP DV7-3063cl laptop PC: what is the maximum temperature for safe operation of the DV7 3063 cl with the upgrade of the 640 M CPU?

  I have recently restored a HP DV7 3063 cl laptop that died a hot mother (MB). I replaced the MB with a new Board of Directors of HP when the price has been reduced to $100, updated the CPU with an announced as new AMD 640 M and applied Arctic Silver on CPU and graphics chips. I put in 4 G memory cool, got the computer to work and installed Windows 10.

  The computer seems to run very hot and stopped twice from overheating during its first period of 2 weeks when it there was not a lot of calculating, fan was run at top speed at all times, and the laptop was high to allow good airflow below.

  According to the program of the Open Hardware Monitor, the CPU had reached 97-99 C a few times. I bought support cooling a player and that seems to help a lot, dropping the temperature to 20 ° C.

  What is the maximum temperature for safe operation of the DV7 with the upgrade of the 640 M CPU?

  Anything more than 90 c is too hot. You can specify the processor and the motherboard you have installed?

  Also if this from the Manual:

  Thermal paste is used on 1 CPU and heat sink section 2 that the services it. Thermal pads are used on the chip Northbridge 3 and 4, the graphical subsystem chip 5 contact Northbridge and graphics/heatsink contact 6. Thermal material replacement is included with all kits of spare parts of processor, heatsink and system board.

  So unless you have changed the cooling system to heat composed on the chip graphic you should have used a thermal buffer. Without the pad, it may leave just a small hallway and destroy the cooling properties. You can use a shim in copper or other piece of something metal to fill the void, but if you just put the heat sink down on the video chip you won't get optimal even with thermal cooling paste.

• I have no idea where my installation for my operating system discs are... but I need to reinstall a dll that I had my computer off and when he returned to the top needed to fdisk... and when he fixed things that the dll has been corrupted.

  where can I download the dll for windows vista ultimate 64 msxml4.dll?

  I tried to get my installation discs and I can't find them. I tried to contact alienware and they said to contact microsoft.
  I tried to use the features of support, but when it asked me to put in my ID of product of your Web page will not accept for any reason any.

  now what should I do?

  can you send me this dll? my email is * address email is removed from the privacy *.
  I'm fucked without my darn install disks.

  You do not qualify for FREE Microsoft Support as your Vista operating system is preinstalled, with the exception of problems with Vista SP2. () Information about this is provided below.)
  
  All the support your Vista is the manufacturer of your computer.
  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner