Update again to install WIndows 7

Similar Questions

• Updates failed to install Windows error 0 x 80240036

  Original title: I can not get updates, it keeps going to the error message

  whenever I go to windows update it begins searching for updates, and then goes to an error [error number: 0 x 80240036 how can I solve this]

  Hi Jerryrollings,

  You receive an error message while checking the updates, download or installation of updates?

  Method 1:

  
  I suggest you run the fixit from the link below and if the problem persists.
  The problem with Microsoft Windows Update is not working
  http://support.microsoft.com/mats/windows_update/.

  Method 2: Clean boot

  How to configure Windows XP to start in a "clean boot" State

  http://support.microsoft.com/kb/310353.

  Note: To set the computer back to start normally, use the procedure How to configure Windows to use a Normal startup state in the same page.

   

  Also try to get the update number that was not installed and the details of the error.

  For more information:

  (a) click Start, click all programs, and then click Windows Update or Microsoft Update.
  (b) click view update history. A window opens that displays all the updates that are installed and those who have not installed properly on the computer
  (c) in the status column, locate the update that do not install and then click on the red X.
  A new window opens that displays the installation error information.

• Windows Update will not install - Windows could not search for new updates to Code 8007051 A

  original title: impossible to install iTunes error HRESULT:0x8007051A and Windows Update doesn't work Windows could not search for new updates to Code 8007051 A

  Am running Vista 32 bit OS and trying to install iTunes but still get the following error;

  ' Microsoft.VC80.CRT.version = "8.0.50727.4053".Guy = "win32".publicKeyToken

  "="1fc8b3b9a1e18e3b".processorArchitecture ="x 86" also HRESULT:0x8007051A

  Some research has indicated that it was due to a problem of update?

  Then tried checking updates (Windows update), who does not ("" Windows could not search for new updates - errors found Code 8007051 A ' ")

  The "get help" link was as useless as an ashtray on a motorbike.

  Any help would be greatly appreciated

  Hi Discopossum,

   

  How long have you encountered this problem?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: Try to install the program as an administrator do a right click on the program installation files and select run as administrator, click on continue if you are prompted to confirm.

  Method 3:  Clean boot the computer and then try to install ITunes

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 4:  Run the fixit available in the article below to reset the Windows Update components

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  If problems with iTunes didn't exist yet, contact the Apple Support
  http://www.Apple.com/support/iTunes/

• Cannot install updates platform to install Windows Live Messenger

  Try to download the new windows live messenger and it continues to appear telling me that I need to download the update for windows vista platform continue to try to do it by what he said in this link http://support.microsoft.com/kb/971644 but it does not work what do I do?

  Questions related to Windows Live should be handled by Windows Live Solution Center.

  Please post to:

  Essentials Installation Threads
  http://windowslivehelp.com/forums.aspx?ProductID=12
   
  You must have carefully read this, but just in case:

  Platform Windows - Windows Live Essentials update

  http://explore.live.com/Windows-Live-Essentials-install-Windows-platform-update-UI

  Error code 643 of Windows Live Essentials.

  http://support.Microsoft.com/kb/974061
   
   
   

• Each PC with the Update icon will install Windows 10

  I have the Update icon on my laptop and I even booked my copy of windows 10, but when I go to 'check pc', it shows that my pc is not compatible, can anyone tell me the conditions required for the update

  The reservation application indicates that I have incompatible hardware (IE. CPU, Bluetooth, video card, printer) or software, what do I do?

  You can check the software developer and supplier of equipment for the latest updates before performing the upgrade.

  UPDATE: Please see the following article by Barb Bowman (Microsoft MVP) solutions to this problem.

  Is that what my display graphic or peripheral Bluetooth compatible with Windows 10? Pre-trial showed that it was not.

  

  Microsoft compatibility database is continually updated with new data. What you can do is to regularly run another scanner to see if the database has updated the information about your hardware. Even if you get this message, you can still run Windows Update after installing Windows 10 and download the latest driver too.

• Updates failed to install Windows 0x800B0110 error

  original title: windows update does not, validated my windows xppro operating system

  Cannot use windows update.  get error 0110 Ox800B went through a few stages of saving some files, (regsrv) said to try it, I did, same problem, but he also says if it does not have to register for other files.  Cannot find this information again.  I took the trouble to go through the process of validation of my windows xp pro SP3 System...  But about 5-16, I had the icon to install the critical updates for windows, and he did it in April.  So should I I simply not care about page update of windows, as the Update icon appears and I have to restart.  Don't understand, but happy that the ion appears when updates need to be installed.

  Hi PattyShepard,

  ·         Did you do changes on the computer before the show?

  ·         You install updates?

  ·         The problem occurs with all the updates?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

• BSOD everytime I try to install updates on newly installed windows 7 64-bit on the computer newly built

  just built a computer a week 7 there and installed.  my computer currently has no installed updates.  whenever I try to install updates (one of them) I get the bsod and need to restore several times, computer works fine until I turn it off.

  the screen will change resolution 1280 x 1024 at ~ 600 x 800 for about five seconds then bluescreen when it spoil.
  my initial error code: 100007e.
  0000005,4843518, 3c3c628, 3c3be80.  any help will be greatly appreciated.

  Hello

  Drivers of suspects, including video, BIOS, drivers ChipSet at low altitude, antivirus and anitspyware/safety programs
  and hardware issues including such as bad sitting cards, memory problems and wiring. Power supply
  is a real possibility. Are the updates of Windows he chokes on driver updates - if so right click on
  These and HIDE?

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  1000007E and 0000007E are the same

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates an unaligned data reference was encountered.
  • 0 x 80000003: STATUS_BREAKPOINT indicates a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.
  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  =====================================================

  This solving generic problems but it should help you resolve the issue however remember them ALL
  This new material is very suspicious.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Update error: cannot install Windows XP Service Pack 3 (KB936929)

  Windows XP Service Pack 3 (KB936929)

  Hi Vcsy,

  You can try http://support.microsoft.com/kb/322389 .  It lists several methods on how to obtain the latest Service Packs.

  In addition, Microsoft offers support for Windows Update problems, and you can contact them by e-mail.  Click on the link below, select the edition of Windows XP, you have, then choose "Windows Updates", then "problems in the installation of updates:

  http://support.Microsoft.com/select/default.aspx?target=assistance&C1=509&

  I hope this helps. : P

  -Queen

• Updates Windows XP - I can save updates after SP3 installed

  original title: Windows XP updates.

  I have windows xp sp3 installed on my system. My question is, can I backup windows updates published after SP3 on cd or dvd so that I can use them again after you have reinstalled windows. It's winning time of update again after reinstalling windows XP WITH SP3.

  Security updates are available on image files CD ISO-9660 starting from Microsoft Download Center

  http://support.Microsoft.com/kb/913086>

  You can also download individual updates from the catalog and save to be installed later.

  http://v4.windowsupdate.Microsoft.com/catalog/en/default.asp>

  You can also download individual updates from the catalog and save to be installed later.

  http://catalog.update.Microsoft.com/v7/site/home.aspx>

  Click the Add button for each update you want to download. Once you have what you want, click on the link "go to download basket. Type or browse to the location where you want the saved updates to and then click on the button "Download Now".

  Once downloaded, you can then burn to CD.

  How to download drivers and updates from the Windows Update Catalog or the Microsoft Update Catalog

  http://support.Microsoft.com/kb/323166>

  Other links that may be useful:

  Search for a download

  http://www.Microsoft.com/downloads/search.aspx?displaylang=en>

  How to install multiple Windows updates or hotfixes with only one reboot

  http://support.Microsoft.com/?kbid=296861>

  For security and other fixes published for a given month:

  http://www.Microsoft.com/technet/security/bulletin/Ms#-* .mspx >

  Replace # with two-digit year

  Replace * with the three-character month abbreviation

  There are reported for that month, you will see the list of 'critical' patches 'important' for this month

  Check the 2nd Tuesday of each month - later in the day.

  For just the list:

  http://www.Microsoft.com/technet/security/current.aspx>

  Courtesy of MVP Harold Horne

  UTC/GMT is 08:41 on Tuesday, October 18, 2011

• Windows Update is not installed

  I am using automatic updates.  Update: "A security update for SQL Server Reporting Services 2000 Service Pack 2 (KB970899)" will not be installed.  I click on "Quick Installation" it tries to install it, and then after a minute or two, it is said that the update was not installed.

  Windows XP SP3, btw...

  I see that it is in the Vista forum...  I was CERTAINLY in the XP forum when I made this question.

  YOUR WEBSITES IS THE WORST, MICROSOFT!

  Hi matthew_TheSocratesGroup,

  You receive an error message while trying to perform the update?

  Click on the link below and see if it helps.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

  http://support.Microsoft.com/kb/906602

  You cannot install updates that you download from the Windows Update Web site on a Windows XP-based computer

  http://support.Microsoft.com/kb/934648/

  You can also try these steps below.

  Reset Windows Update components.

  Click on the Fix Me to reset to be done immediately.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/KB971058

  Once the Windows Update components are reset, try to reinstall updates. To do so,

  1. open Windows Update by clicking Start , all programsand then click Windows Update.

  2. click on the option to change the settings in the left navigation bar. You will now be on a screen where you will be able to set up how Windows Vista download and install updates on your computer.

  3. Select updates but let me choose whether to download and install them. When you have finished setting options that you want, press the OK button to save these settings. You will now be at the main screen of Windows Update.

  4. in the left pane, click check for updates, and then wait while Windows searches the latest updates for your computer.

  5. you can then download the updates one or both.

  6. click on install updates to install the updates that are currently selected.

  7. Repeat steps 5 and 6 until you get all the updates you want on your PC.

  For more information about installing the windows updates, see

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Hope this information helps.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• I got error code490 when I instal windows update to windows vista Home premium

  490 code

  Hi jas38000,

  A what you try to download the update from the Windows Update Web site or Windows Vista?

  Here are some links that might help you.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Try to reset the Windows Update components. Click on the Fix Me to reset to be done immediately.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/KB971058

  Once the Windows Update components are reset, try to reinstall updates. To do so,

  1. open Windows Update by clicking Start , all programsand then click Windows Update.

  2. click on the option to change the settings in the left navigation bar. You will now be on a screen where you will be able to set up how Windows Vista download and install updates on your computer.

  3. Select updates but let me choose whether to download and install them. When you have finished setting options that you want, press the OK button to save these settings. You will now be at the main screen of Windows Update.

  4. in the left pane, click check for updates, and then wait while Windows searches the latest updates for your computer.

  5. you can then download the updates one or both.

  6. click on install updates to install the updates that are currently selected.

  7. Repeat steps 5 and 6 until you get all the updates you want on your PC.

  For more information about installing the windows updates, see

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Hope this information helps.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• kb2633171 a security update wont install windows vista and keeps on saying failed in the history of updates with the error code 80070020

  Original title: kb2633171 security update will not install windows vista

  Hello

  as noted above, the kb2633171 of security update will not install on my computer used windows vista laptop. I had mcafee installed since the first day (it came with the pc). He continues saying failed in the history of updates with the error code 80070020. When I restart the pc, it says that it cannot configure the update and it is up to the old settings.

  I ran the fix it and aggressive to solve this problem, no luck :-(

  any help muchly appreciated.
  Thank you!

  Chiara

  Hi Chiara,

  Try following the steps in the following article.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

   

  Let us know if it helps.

• Cannot install Windows 7 x 64 Pro (updated version) in a new VM student

  Hello

  I'm trying to install Windows 7 x 64 Pro (updated version) in a new VW using Easy Install student but I get the following error in the virtual machine once it starts copying Windows files:

  TO USE THE PRODUCT KEY YOU ENTERED, START THE INSTALLATION ON A COMPUTER THAT IS RUNNING GENUINE WINDOWS.

  I contacted Microsoft and Digital River and they say that the product key works fine.

  Anyone else having this problem? No work around? How can I perform a clean installation, if I don't want to upgrade a Win XP VW?

  Help, please.

  Thank you

  Percy

  Windows 7 (and Vista) will install without a product key.  You can even install easily leaving the empty product key (VMware will tell you), in the process, he can make a break for you ask what edition you have a valid key for and after the installation, you enter your product key in the system properties.

  For instructions detailed article Windows Supersite for the extraction of media update facility: Clean install Windows 7 with upgrade media

• ERROR_NOT_FOUND (0 X 80070490) when you install Windows Vista Service Pack 2

  ERROR_NOT_FOUND (0 X 80070490)

  I tried and tried again to install Windows Vista Service Pack 2 x 64-bit system, but this error message keeps popping up. I tried to search for possible solutions, but they all tell me I have to use my Vista DVD. But there is a problem, I don't have it. I mean, that is, the gateway factory pre-installed Vista on my laptop, so I don't have the DVD. Is there anyone who can help me? THNX.

  Hi Jason,

  You can try the following solutions.

  Step 1: Download and install the system update readiness tool to run a single analysis for inconsistencies that may prevent successful installations of Windows Update.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Step 2: Try to install Windows Vista Service Pack 2 now and see if it helps.

  Learn how to install Windows Vista Service Pack 2 (SP2)

  See also:

  Windows Update error 80070490

• Satellite L500 - how to install Windows 7 on new HARD drive

  I just bought 2 satellite L500 1xl/1xj second hand to re sell one and keep the other.

  It's both fired their HARD drive and I have no installation CD re install Windows 7.
  How can I do this without the CD or the original HARD drive?

  > I have no CD installer again to install windows 7, how can I do this without the CD or the original hard drive?

  Get Windows copy disk and installation, all the drivers are available on the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] you can also buy a [recovery disk | https://backupmedia.toshiba.eu/landing.aspx] I see no other options to do so.