Tag RMAN restore

Similar Questions

• RMAN restore to another device Oracle 11 g 1

  Hello
  
  I have a big problem. I have on PC running Windows Server 2003 named "Host A" and another Windows Server 2003 "host B".
  I made a backup of host A and you want to restore it to host B with the procedure.
  
  Preparation & backup:

            SQLPLUS SYS AS SYSDBA
            SQL>SHUTDOWN IMMEDIATE     
            SQL>STARTUP MOUNT
            SQL>ALTER DATABASE ARCHIVELOG;
            SQL>ALTER DATABASE OPEN;
            SQL>ARCHIVE LOG LIST;
            SQL>ALTER SYSTEM ARCHIVE LOG START;
            SQL>QUIT
  
            RMAN TARGET /
            RMAN>CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 
  'C:\Oracle-Backup\backup/%T.bkp';
  
  RMAN>CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE 
  DISK TO 'C:\Oracle-Backup\controlfile/%F.bkp';
  
  
            RMAN>CONFIGURE CONTROLFILE AUTOBACKUP ON;
            RMAN>EXIT;
            
  
            RMAN TARGET /
            RMAN>BACKUP DATABASE;     // maybe PLUS ARCHIVELOG 
            RMAN>EXIT;

  After this I got a Controlfile 9,6 mb and a 1 GB file backup
  
  Then I restored to the second machine:

  Microsoft Windows [Version 5.2.3790]
  (C) Copyright 1985-2003 Microsoft Corp.
  
  C:\Dokumente und Einstellungen\Administrator>rman
  
  Recovery Manager: Release 11.1.0.6.0 - Production on Mi Mai 16 11:13:33 2012
  
  Copyright (c) 1982, 2007, Oracle.  All rights reserved.
  
  RMAN> quit
  
  
  Recovery Manager abgeschlossen.
  
  C:\Dokumente und Einstellungen\Administrator>rman target / nocatalog
  
  Recovery Manager: Release 11.1.0.6.0 - Production on Mi Mai 16 11:14:02 2012
  
  Copyright (c) 1982, 2007, Oracle.  All rights reserved.
  
  Mit Ziel-Datenbank verbunden: XXX (DBID=1455796592)
  Kontrolldatei der Zieldatenbank wird anstelle des Recovery-Katalogs verwendet
  
  RMAN> shutdown immediate;
  
  Datenbank geschlossen
  Datenbank nicht angeschlossen
  Oracle-Instance heruntergefahren
  
  RMAN> set dbid 1449626294
  
  Befehl wird ausgef³hrt: SET DBID
  
  RMAN> startup nomount;
  
  mit Zieldatenbank verbunden (nicht gestartet)
  Start nicht erfolgreich: ORA-01078: failure in processing system parameters
  LRM-00109: Parameterdatei 'C:\PROGRAMME\ORACLE\111\DATABASE\INITXXX.ORA'
   konnte nicht ge+ffnet werden
  
  Oracle Instance ohne Parameterdatei gestartet, um spfile abzurufen
  Oracle-Instance gestartet
  
  Gesamte System Global Area     159019008 Byte
  
  Fixed Size                     1331852 Byte
  Variable Size                 71306612 Byte
  Database Buffers              83886080 Byte
  Redo Buffers                   2494464 Byte
  
  RMAN> restore spfile from 'c:\Oracle-Dump\CONTROLFILEC-1449626294-20120306-03.BK
  P';
  
  Starten restore um 16.05.12
  Zugewiesener Kanal: ORA_DISK_1
  Kanal ORA_DISK_1: SID=98 Device-Typ=DISK
  
  Kanal ORA_DISK_1: Spfile wird aus AUTOBACKUP c:\Oracle-Dump\CONTROLFILEC-1449626
  294-20120306-03.BKP zur³ckgeschrieben
  Kanal ORA_DISK_1: Zur³ckschreiben von SPFILE aus AUTOBACKUP abgeschlossen
  Beendet restore um 16.05.12
  
  RMAN> shutdown immediate;
  
  Oracle-Instance heruntergefahren
  
  RMAN> startup nomount;
  
  mit Zieldatenbank verbunden (nicht gestartet)
  Oracle-Instance gestartet
  
  Gesamte System Global Area     535662592 Byte
  
  Fixed Size                     1334380 Byte
  Variable Size                348128148 Byte
  Database Buffers             180355072 Byte
  Redo Buffers                   5844992 Byte
  
  RMAN> restore controlfile from 'c:\Oracle-Dump\CONTROLFILEC-1449626294-20120306-
  03.BKP';
  
  Starten restore um 16.05.12
  Zugewiesener Kanal: ORA_DISK_1
  Kanal ORA_DISK_1: SID=208 Device-Typ=DISK
  
  Kanal ORA_DISK_1: Kontrolldatei wird zur³ckgeschrieben
  Kanal ORA_DISK_1: Restore abgeschlossen, abgelaufene Zeit: 00:00:03
  Ausgabedateiname=C:\PROGRAMME\ORACLE\111\DATA\XXX\CONTROL01.CTL
  Ausgabedateiname=C:\PROGRAMME\ORACLE\111\DATA\XXX\CONTROL02.CTL
  Ausgabedateiname=C:\PROGRAMME\ORACLE\111\DATA\XXX\CONTROL03.CTL
  Beendet restore um 16.05.12
  
  RMAN> alter database mount
  2> ;
  
  Datenbank angeschlossen
  Freigegebener Kanal: ORA_DISK_1
  
  RMAN> catalog start with 'c:\oracle-Dump\';
  
  Starten implicit crosscheck backup um 16.05.12
  Zugewiesener Kanal: ORA_DISK_1
  Kanal ORA_DISK_1: SID=208 Device-Typ=DISK
  10 Objekte auf _bereinstimmung gepr³ft
  Beendet implicit crosscheck backup um 16.05.12
  
  Starten implicit crosscheck copy um 16.05.12
  Kanal ORA_DISK_1 wird benutzt
  Beendet implicit crosscheck copy um 16.05.12
  
  Suche nach allen Dateien im Recovery-Bereich
  Dateien werden katalogisiert...
  Keine Dateien katalogisiert
  
  Suche nach allen Dateien, die mit dem Muster c:\oracle-Dump\ ³bereinstimmen
  
  Datenbank kennt Dateiliste nicht
  =====================================
  Dateiname: C:\ORACLE-DUMP\BACKUPXXX777222642.BKP
  Dateiname: C:\ORACLE-DUMP\BACKUPXXX777222669.BKP
  Dateiname: C:\ORACLE-DUMP\BACKUPXXX777222949.BKP
  Dateiname: C:\ORACLE-DUMP\CONTROLFILEC-1449626294-20120306-03.BKP
  
  M÷chten Sie die obigen Dateien wirklich katalogisieren (geben Sie YES oder NO ei
  n)? yes
  Dateien werden katalogisiert...
  Katalogisierung erfolgt
  
  Liste mit katalogisierten Dateien
  =======================
  Dateiname: C:\ORACLE-DUMP\BACKUPXXX777222642.BKP
  Dateiname: C:\ORACLE-DUMP\BACKUPXXX777222669.BKP
  Dateiname: C:\ORACLE-DUMP\BACKUPXXX777222949.BKP
  Dateiname: C:\ORACLE-DUMP\CONTROLFILEC-1449626294-20120306-03.BKP
  
  RMAN> restore database;
  
  Starten restore um 16.05.12
  Kanal ORA_DISK_1 wird benutzt
  
  Kanal ORA_DISK_1: Zur³ckschreiben von Datendatei-Backup Set beginnt
  Kanal ORA_DISK_1: Datendatei(en) werden zum Wiederherstellen aus Backup Set ange
  geben
  Kanal ORA_DISK_1: Datendatei 00001 wird zu C:\PROGRAMME\ORACLE\111\DATA\XXX
  \SYSTEM01.DBF wiederhergestellt
  Kanal ORA_DISK_1: Datendatei 00002 wird zu C:\PROGRAMME\ORACLE\111\DATA\XXX
  \SYSAUX01.DBF wiederhergestellt
  Kanal ORA_DISK_1: Datendatei 00003 wird zu C:\PROGRAMME\ORACLE\111\DATA\XXX
  \UNDOTBS01.DBF wiederhergestellt
  Kanal ORA_DISK_1: Datendatei 00004 wird zu C:\PROGRAMME\ORACLE\111\DATA\XXX
  \USERS01.DBF wiederhergestellt
  Kanal ORA_DISK_1: Datendatei 00005 wird zu C:\PROGRAMME\ORACLE\111\ORADATA\DBTT
  wiederhergestellt
  Kanal ORA_DISK_1: Datendatei 00006 wird zu C:\PROGRAMME\ORACLE\111\ORADATA\EM_LO
  G_TUEM wiederhergestellt
  Kanal ORA_DISK_1: Lesen aus Backup Piece C:\ORACLE-DUMP\BACKUPXXX777222669.
  BKP
  Kanal ORA_DISK_1: Piece Handle=C:\ORACLE-DUMP\BACKUPXXX777222669.BKP Tag=TA
  G20120306T151108
  Kanal ORA_DISK_1: Backup Piece 1 wurde wiederhergestellt
  Kanal ORA_DISK_1: Restore abgeschlossen, abgelaufene Zeit: 00:02:05
  Beendet restore um 16.05.12
  
  RMAN> recover database;
  
  Starten recover um 16.05.12
  Kanal ORA_DISK_1 wird benutzt
  
  Media Recovery starten
  
  Kanal ORA_DISK_1: Zur³ckschreiben von Archive Log in Standardziel wird begonnen
  Kanal ORA_DISK_1: Archive Log wird zur³ckgeschrieben
  Archive Log Thread=1 Sequence=10
  Kanal ORA_DISK_1: Lesen aus Backup Piece C:\ORACLE-DUMP\BACKUPXXX777222949.
  BKP
  Kanal ORA_DISK_1: Piece Handle=C:\ORACLE-DUMP\BACKUPXXX777222949.BKP Tag=TA
  G20120306T151548
  Kanal ORA_DISK_1: Backup Piece 1 wurde wiederhergestellt
  Kanal ORA_DISK_1: Restore abgeschlossen, abgelaufene Zeit: 00:00:01
  Archive Log-Dateiname=C:\PROGRAMME\ORACLE\111\FLASH_RECOVERY\XXX2DB\ARCHIVE
  LOG\2012_05_16\O1_MF_1_10_7V73N5RW_.ARC Thread=1 Sequence=10
  Kanal default: Archive Logs werden gel÷scht
  Archive Log-Dateiname=C:\PROGRAMME\ORACLE\111\FLASH_RECOVERY\XXX2DB\ARCHIVE
  LOG\2012_05_16\O1_MF_1_10_7V73N5RW_.ARC RECID=13 STAMP=783429893
  Archive Log kann nicht gefunden werden
  Archive Log Thread=1 Sequence=11
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: Fehler bei recover Befehl auf 05/16/2012 11:24:57
  RMAN-06054: Media Recovery fordert unbekanntes Archive Log f³r Thread 1 mit Sequ
  ence 11 und Start-SCN von 1094112 an
  
  RMAN> alter database open resetlogs;
  
  Datenbank ge÷ffnet
  
  RMAN> quit
  
  
  Recovery Manager abgeschlossen.
  
  C:\Dokumente und Einstellungen\Administrator>

  But when I now try to access the database control I got following error:
  ' 503 service unavailable: Servlet error exception occurred the current application deployment descriptor do not include in this response.
  
  and the restored data are not included.
  
  I hope someone can tell me what I did wrong.
  Thank you
  
  Published by: 919309 on 07.03.2012 02:08
  
  Published by: 919309 on 07.03.2012 02:12

  drop the repository and try with dbca

  EMCA - deconfig dbcontrol db-rest drop

• RMAN restore and recovery

  Hello

  If I have two full backups in my FRA (say 7 to 14 days)

  Q1. I assume that if I run it.

  RMAN > restore database;

  It will go to the last backup (7 days ago)?

  Q2. How to restore the backup of ago 14 days instead?

  Q3. If I restore the database of 14 days but then question

  RMAN > recover database until < 3 days >

  RMAN would simply apply the recovery logs archived for 14 days to the point of recovery or it would be smart enough to realize, there a backup to restore all first 7 days ago, then apply 7 days recovery logs, to the point of recovery?

  Q4. Can you do an online backup as a copy of the Image instead of a backup set or you can offline backups when you use a copy of the Image?

  All wisdom, greatly appreciated

  Jim

  (1) switching is not required for recovery. You have just enough do to standardize the data files. It doesn't matter if the switch is produced or not.

  (2) "extra small set of archivelogs" can be enormous if the backup is long-term with many DML during backup.

  You need a sufficiently archivelogs, regardless of the copy backupset or image, to make the data files in compliance.

  (3) hot RMAN copy backup data files, while they are updated, but in order to avoid a block inconsistent read to avoid corruption. The data files are not frozen, as with the hot user managed backup.

• RMAN, restoration of ASM no - asm environment!

  Dear friends,

  WE are running Oracle 11 GR 2 CARS as our PRODUCTION server. also, we have a single instance, DATAGUARD, where production data are replicated.

  On the end DATAGUARD, we take a weekly full backup RMAN. My db_name is 'isldb '.

  Now I want to restore the backup, RMAN COMPLETE the DATAGUARD server to a new server NO - ASM using file system normal... For this reason, I have to follow the procedure below:

  (1) take RMAN full backup of DATAGUARD END as a stage to mount and store it on ' / rmanback' file.  I use the below taken backup script:

  Run {}

  allocate channels d1 device type disk format ' / rmanback/isl/$TODAY/df_%U_%T';

  allocate channel device type d2 disc format ' / rmanback/isl/$TODAY/df_%U_%T';

  backup database effective additional 0 CHECK the LOGIC AS BACKUPSET COMPRESS;

  backup format ' / rmanback/isl/$TODAY/controlfile.ctlbk' (current controlfile);

  backup format ' / rmanback/isl/$TODAY/spfile.spbak' (spfile);

  ARCHIVELOG backup all;

  output channel d1;

  output channel d2;

  }

  (2) the transfer of the rman backup complete on a remote server on the same ' / rmanback' file.

  (3) in the new server, I take the scene nomount database using a spfile (spfile has a single entry: 'DB_NAME = isldb')

  (4) then I restore the controlfile successfully:

  [oracle@PRIM ~] target rman $ /.

  Recovery Manager: release 11.2.0.3.0 - Production Wed Aug 20 16:01:21 2014

  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

  connected to target database: ISLDB (unassembled)

  RMAN > restore controlfile to ' / rmanback/isl/20140810_181405/controlfile.ctlbk';

  From restoration to 20 August 14

  using the control file of the target instead of recovery catalog database

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 332 type device = DISK

  channel ORA_DISK_1: restore the control file

  channel ORA_DISK_1: restore complete, duration: 00:00:01

  output file name=/u01/app/oracle/oradata/isldg/control01.ctl

  output file name=/u01/app/oracle/oradata/isldg/control02.ctl

  Finished restore at August 20, 14

  (5) to restore the data successfully file using the command below:

  run

  {

  the value of newname for datafile '+ DATA/isldg/datafile/system.298.849413815' to ' / u01/app/oracle/oradata/isldb/system1.dbf';

  the value of newname for datafile '+ DATA/isldg/datafile/sysaux.295.849413813' to ' / u01/app/oracle/oradata/isldb/sysaux1.dbf';

  the value of newname for datafile '+ DATA/isldg/datafile/undotbs1.296.849413813' to ' / u01/app/oracle/oradata/isldb/undotbs1.dbf';

  the value of newname for datafile '+ DATA/isldg/datafile/undotbs2.297.849413815' to ' / u01/app/oracle/oradata/isldb/undotbs2.dbf';

  the value of newname for datafile '+ DATA/isldg/datafile/users.299.849413849' to ' / u01/app/oracle/oradata/isldb/users1.dbf';

  the value of newname for datafile '+ DATA/isldg/datafile/bu_system_tbs.291.849413617' to ' / u01/app/oracle/oradata/isldb/bu_system_tbs1.dbf';

  the value of newname for datafile '+ DATA/isldg/datafile/bu_his_log_tbs.292.849413617' to ' / u01/app/oracle/oradata/isldb/bu_his_log_tbs1.dbf';

  the value of newname for datafile '+ DATA/isldg/datafile/bu_index_tbs.293.849413617' to ' / u01/app/oracle/oradata/isldb/bu_index_tbs1.dbf';

  the value of newname for datafile '+ DATA/isldg/datafile/bu_image_tbs.294.849413619' to ' / u01/app/oracle/oradata/isldb/bu_image_tbs1.dbf';

  the value of newname for tempfile 1 to ' / u01/app/oracle/oradata/isldb/temp1.dbf';

  restore the database;

  }

  RESTORATION came with success, and all data files store in the folder specified with success.

  (6) now when I recover the database, then I found the below error:

  > SQL > alter database open resetlogs;

  ALTER database open resetlogs

  ERROR on line 1:

  ORA-01157: cannot identify/lock data file 1 - see DBWR trace file

  ORA-01110: data file 1: '+ DATA/isldg/datafile/system.298.849413815 '.

  > SQL > restore database;

  ORA-00283: cool cancelled due to errors

  ORA-01610: recovery using BACKUP CONTROLFILE option must be

  > SQL > restore database until cancel using backup controlfile;

  ORA-00283: cool cancelled due to errors

  ORA-01110: data file 1: '+ DATA/isldg/datafile/system.298.849413815 '.

  ORA-01157: cannot identify/lock data file 1 - see DBWR trace file

  ORA-01110: data file 1: '+ DATA/isldg/datafile/system.298.849413815 '.

  Could someone help me please, how can I recover as open my database?

  Your archivelog was not "missing."  He seems to have a different file name format.

  No one can touch «_allow_resetlogs_corruption» action  You are now on your own.

  Hemant K Collette

• RMAN restore in the State of the mount in Oracle 11 g DB

  I have a question which can be very naïve, it is to confirm if the RMAN restore happens in the mount status of data or can it also happen when the DB is in open State?

  I hope my question is clear what is the eligible state of the database in which the RMAN restore can happen.

  Please get back with the answer to my query.

  
  

  Concerning

  addition of HemantKChitale response

  If you must restore controlfile, restoration can be done with the database OPEN or MOUNT, it should be in NOMOUNT State.

• RMAN restore issues

  Hi all
  
  I perform a Production to a Dev Server refresh. I made a full backup of the production and trying to restore in the dev Setup...
  
  I delivered the backup of the production to dev box... I created a database and put it in nomount mode...
  
  So I'm trying to restore the controlfile, but I am gettign the error below:
  
  
  RMAN > restore controlfile to ' / orabackup/bkp_030113/controlprod.ctl';
  
  From restoration to January 4, 13
  using the control file of the target instead of recovery catalog database
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 198 type device = DISK
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at the 17:50:35 04/01/2013
  RMAN-06172: no AUTOBACKUP couldn't find or handle specified is not a valid copy or a piece
  
  
  Please suggest.
  
  Kind regards
  Aalami

  RMAN-06172: no AUTOBACKUP couldn't find or handle specified is not a valid copy or a piece

  Can you check the backup file permissions after you have moved production to the development area?

  $ls ltr - /orabackup/bkp_030113/controlprod.ctl

  And make sure you set DBID of production database.

  BTW, FRA is configured?
  Work around you can try to disable and after successful restoration, again, you can activate FRA.

• RMAN restore level 0, 1 incremental level and ARCHIVELOGs

  I can't understand it and I read through the documentation and the web.
  
  On linux 64-bit in 11.2.0.3, I do weekly backups of level 0 and increments of 1 level every night. During the day, I also do ARCHIVELOG backups.
  
  I know I need to restore the LEVEL 0 database files (which I can do it), then later increments of 1 LEVEL of restoration (which I just can't), then apply ARCHIVELOGs (what I do).
  
  My problem is HOW to apply files of database LEVEL 1 of the above LEVEL 0 incremental backups restored?
  
  Thanks in advance!

  default channel: deletion of Journal archives

  And I haven't used the command "recover archivelog deletion of database; I used "recover the database.

  This isn't a problem. At the time of recovery, it is common that you see these messages.

  During restore, RMAN restores the archives at the local site, and finally when the recovery is complete, it deletes the temporarily stored archives.

  rewh2oman
       
  Handle: rewh2oman
  Status level: Beginner
  Join date: January 9, 2007
  Messages total: 87
  Total Questions: 6 (4 pending)
  Name russ

  If you feel that your questions have been answered, then please provide appropriate points and consider the son of closing. Please clean the forum!

• RMAN restore controlfile error

  I get this error below during the restoration of the control file. my auto backup controlfile is on and its still news
  
  RMAN > restore controlfile to ' / TIFD/dumps/TIFD/backupset/c-916530472-20120830-01';
  
  From restoration to 03-SEP-12
  using the control file of the target instead of recovery catalog database
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 12 type of device = DISK
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at 03/09/2012 04:42:50
  RMAN-06172: no AUTOBACKUP couldn't find or handle specified is not a valid copy or a piece
  
  
  Thank you

  If you try to restore automatic backup, use
  Restore automatic backup controlfile;

  and the element of particular backup.
  Restore controlfile to ' / backup_dir/piece_name ";

• confusion about rman restore

  Hello world
  I have some confusion about rman restore and recover procedures. I read doc available in this regard and google as well. A few more questions unanswered in my mind.
  1. do the restore backup command restore controlfile also alongwith datafiles.
  2 database is running in noarchivelog mode. Suppose one of say users.dbf data files has been removed. control files intact. the same seq # is available since the last log backup. Now to restore the database, I use the following steps.
  1 rman > shutdown immediate
  2 rman > startup mount
  3 rman > restore database
  4 rman > restore database
  5 rman > alter database open;
  
  I'm wrong. This is the one. In this scenario, the steps above can be used.
  
  3. even when logseq is not available when the database is saved, I take the following steps.
  1 rman > startup nomount;
  2 rman > restore controlfile autobackup.
  3 rman > change the editing of the database;
  4 rman > restore database;
  5 rman > recover noredo db;
  6 rman > alter database open resetlogs;
  It is a right. can I adopt this procedure in my scenario.
  
  Please do not give all the links I want some explanation of your minds.
  
  Geetanjali.

  sonidba wrote:
  Hello world
  I have some confusion about rman restore and recover procedures. I read doc available in this regard and google as well. A few more questions unanswered in my mind.
  1. do the restore backup command restore controlfile also alongwith datafiles.
  2 database is running in noarchivelog mode. Suppose one of say users.dbf data files has been removed. control files intact. the same seq # is available since the last log backup. Now to restore the database, I use the following steps.
  1 rman > shutdown immediate
  2.RMAN > startup mount
  3.RMAN > restore database
  4.RMAN > restore database
  5.RMAN > alter database open;

  I'm wrong. This is the one. In this scenario, the steps above can be used.

  If after the last COLD backup is there not get command of newspaper (this means journal seq number is the same), so you can restore your database since the last backup and can retrieve it. And if thi does not need perform full restoration/recovery. At instead step 3 with DATA RESTORE (or RESTORE TABLESPACE USERS) file and step 4 instead with RECOVER DATAFILE (or RECOVER TABLESPACE USERS) and after that you can open the database by using ALTER DATABASE OPEN. If you have lost datafile users.dbf it means that this (tablespace) datafie has been automatically disconnected.

  3. even when logseq is not available when the database is saved, I take the following steps.
  1 rman > startup nomount;
  2 rman > restore controlfile autobackup.
  3.RMAN > change the editing of the database;
  4 rman > restore database;
  5 rman > recover noredo db;
  6 rman > alter database open resetlogs;
  It is a right. can I adopt this procedure in my scenario.

  Yes you are right in this case. There, you have to restore/recovery complete database, because of your database running in NOARCHIVELOG mode. But after database restore (step4) you can just issue RESTORE database and can open with RESETLOGS options also. Also if you have incremental backups can run NOARCHIVELOG mode even RETRIEVE the NOREDO of DATABASE then you can open the database.

• RMAN restore % complete query

  version 10203
  I'm looking for a good query to find our age % RMAN restore/recovery
  
  I know that my db size is 160 GB and 50 GB has been restored by rman restore in the last 3 hours, so I guess... what happens if recovery end up with an error, I have to restore again and spent several hours again or I can just correct the rman error and just do recovery...?
  _______________________________________________________________________________________
  Here is the command that i began the restoration
  RUN
  {
  until the SNA 4475223426780.
  allocate channel t1 type 'sbt_tape' parms 'ENV=(TDPO_OPTFILE=/opt/tivoli/tsm/client/oracle/bin64/tdpo.opt) ';
  allocate channel t2 type 'sbt_tape' parms 'ENV=(TDPO_OPTFILE=/opt/tivoli/tsm/client/oracle/bin64/tdpo.opt) ';
  allocate channel t3 type 'sbt_tape' parms 'ENV=(TDPO_OPTFILE=/opt/tivoli/tsm/client/oracle/bin64/tdpo.opt) ';
  allocate channel t4 type 'sbt_tape' parms 'ENV=(TDPO_OPTFILE=/opt/tivoli/tsm/client/oracle/bin64/tdpo.opt) ';
  CONFIGURE DEVICE TYPE 'sbt_tape' 4 of PARALLELISM;
  restore the database;
  recover the database;
  ALTER database open resetlogs;
  }
  
  Published by: DBA2008 on October 13, 2010 11:02

  RMAN the fact on its own that you mentioned is expected as shown - for backups, restorations of not only this setting.

  Published by: rui_catcuddler on October 13, 2010 11:18

• RMAN restore: what is the DBID?

  Hello

  There were a few problems with plesk on our server and there is no way except the OS reload. Here is the log for each backup car of the day:

  XE Backup Journal

  Recovery Manager: release 11.2.0.2.0 - Production on Mon Oct 5 02:30:02 2015

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

  connected to target database: XE (DBID = 2713545907)

  RMAN >

  echo on

  RMAN > configure redundancy 2 retention policy;

  using the control file of the target instead of recovery catalog database

  RMAN old configuration settings:

  CONFIGURE REDUNDANCY 2 RETENTION STRATEGY;

  new RMAN configuration settings:

  CONFIGURE REDUNDANCY 2 RETENTION STRATEGY;

  new RMAN configuration settings are stored successfully

  RMAN > configure controlfile autobackup format clear device type disk;

  RMAN configuration settings are reset to the default value

  RMAN > configure controlfile autobackup on;

  RMAN old configuration settings:

  CONFIGURE CONTROLFILE AUTOBACKUP

  new RMAN configuration settings:

  CONFIGURE CONTROLFILE AUTOBACKUP ON;

  new RMAN configuration settings are stored successfully

  RMAN > sql "create pfile =" / u01/app / . Oracle / Product/11.2.0/XE/DBS/ " spfile2init.ora" of spfile ";

  sql statement: create pfile = "/ u01/app / Oracle / Product/11.2.0/XE/DBS/ spfile2init.ora "of spfile

  RMAN > backup backupset device type disk database;

  From backup October 5, 15

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 114 type device = DISK

  channel ORA_DISK_1: from full data file backup set

  channel ORA_DISK_1: specifying datafile (s) in backup set

  file number of the input data file = 00001 = / var/oradata/XE/system name. DBF

  file number of the input data file = 00002 name = / var/oradata/XE/sysaux. DBF

  file number of the input data file = 00003 name = / var/oradata/XE/undotbs1. DBF

  Enter a number of file datafile = name=/var/oradata/XE/users.dbf 00004

  channel ORA_DISK_1: starting total, 1-5 October 15

  channel ORA_DISK_1: finished piece 1 at 5 October 15

  piece handle = / var/oracle_fra/XE / backupset/2015_10_05/o1_mf_ nnndf_TAG20151005T023003_ c149qwxk_.BKP tag = TAG20151005T023003 comment = NONE

  Channel ORA_DISK_1: backup complete set, time: 00:01:56

  Finish backup October 5, 15

  From control file and SPFILE Autobackup 5 October 15

  piece handle = / var/oracle_fra/XE / backup automatic/2015_10_05/o1_mf_s_ 892261919_c149vhn0_.BKP comment = NONE

  File control finished and Autobackup SPFILE to 5 October 15

  RMAN > configure controlfile autobackup.

  RMAN old configuration settings:

  CONFIGURE CONTROLFILE AUTOBACKUP ON;

  new RMAN configuration settings:

  CONFIGURE CONTROLFILE AUTOBACKUP

  new RMAN configuration settings are stored successfully

  RMAN > delete noprompt obsolete;

  RMAN retention policy apply to the order

  RMAN retention policy is set to 2 redundancy

  using channel ORA_DISK_1

  Radiation of the obsolete following backups and copies:

  Making key time filename/handle type

  -------------------- ------ ------------------ --------------------

  Backup Define 1265 3 October 15

  Backup piece 1265 3 October 15/var/oracle_fra/XE/backupset /2015_10_03/o1_mf_nnndf_TAG20151003T023003_c0z0zwm9_. BKP

  Log archiving 669 3 October 15/var/oracle_fra/XE/archivelog / 2015_10_03/o1_mf_1_730_ c0z13f0x_.arc

  Backup Define 1266 3 October 15

  Backup piece 1266 3 October 15/var/oracle_fra/XE/autobackup /2015_10_03/o1_mf_s_892089109_c0z1364t_.bkp

  deleted backup room

  backup piece handle = / var/oracle_fra/XE / backupset/2015_10_03/o1_mf_ nnndf_TAG20151003T023003_ c0z0zwm9_.BKP RECID = 1265 STAMP = 892089004

  Delete archived log

  name = archived log file / var/oracle_fra/XE / ARCHIVELOG/2015_10_03/o1_mf_1_ 730_c0z13f0x_.arc RECID = 669 STAMP = 892089118

  deleted backup room

  backup piece handle = / var/oracle_fra/XE / backup automatic/2015_10_03/o1_mf_s_ 892089109_c0z1364t_.BKP RECID = 1266 STAMP = 892089110

  3 items deleted

  RMAN >

  Complete recovery manager.

  Recovery Manager: release 11.2.0.2.0 - Production on Mon Oct 5 02:32:04 2015

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

  connected to target database: XE (DBID = 2713545907)

  RMAN >

  using the control file of the target instead of recovery catalog database

  SQL statement: alter system archive log current

  RMAN >

  Complete recovery manager.

  The data files and RMAN backup files resides on the other HDD that are:

  / var/oradata/XE

  / var/oracle_fra

  I also copied the following files:

  init.ora

  spfile2init.ora

  spfileXE.ora

  Now the OS is reloaded, and I installed oracle from scratch:

  SQL > SELECT * FROM v version $;

  BANNER

  --------------------------------------------------------------------------------

  Oracle Database 11 g Express Edition Release 11.2.0.2.0 - 64 bit Production

  PL/SQL Release 11.2.0.2.0 - Production

  CORE Production 11.2.0.2.0

  AMT for Linux: Version 11.2.0.2.0 - production

  ===================================

  ] # cat/etc/centos-release

  CentOS release 6.7 (Final)

  The following folders/files are on my slave drive:

  oradata/disk1 /.

  / Disk1/oradata/XE

  /Disk1/oradata/XE/control.dbf

  /Disk1/oradata/XE/redo10_01.dbf

  /Disk1/oradata/XE/redo11.dbf

  /Disk1/oradata/XE/redo12.dbf

  /Disk1/oradata/XE/redo13.dbf

  /Disk1/oradata/XE/redo14.dbf

  /Disk1/oradata/XE/redo15.dbf

  /Disk1/oradata/XE/SYSAUX.dbf

  /Disk1/oradata/XE/system.dbf

  /Disk1/oradata/XE/temp.dbf

  /Disk1/oradata/XE/undotbs1.dbf

  /Disk1/oradata/XE/users.dbf

  oracle_fra/disk1 /.

  / Disk1/oracle_fra/XE

  / Disk1/oracle_fra/XE/ARCHIVELOG

  / Disk1/oracle_fra/XE/Autobackup

  / Disk1/oracle_fra/XE/backupset

  / Disk1/oracle_fra/XE/onlinelog

  / Disk1/oracle_fra/XE/ARCHIVELOG/2015_09_29

  / Disk1/oracle_fra/XE/ARCHIVELOG/2015_09_30

  / Disk1/oracle_fra/XE/ARCHIVELOG/2015_10_01

  / Disk1/oracle_fra/XE/ARCHIVELOG/2015_10_02

  / Disk1/oracle_fra/XE/ARCHIVELOG/2015_10_03

  / Disk1/oracle_fra/XE/ARCHIVELOG/2015_10_04

  / Disk1/oracle_fra/XE/ARCHIVELOG/2015_10_05

  / Disk1/oracle_fra/XE/ARCHIVELOG/2015_10_06

  /Disk1/oracle_fra/XE/ARCHIVELOG/2015_10_04/o1_mf_1_731_c11ognk8_.arc

  /Disk1/oracle_fra/XE/ARCHIVELOG/2015_10_05/o1_mf_1_732_c149vo3c_.arc

  /Disk1/oracle_fra/XE/ARCHIVELOG/2015_10_05/o1_mf_1_733_c15dshcn_.arc

  /Disk1/oracle_fra/XE/ARCHIVELOG/2015_10_06/o1_mf_1_734_c18sw1q9_.arc

  / Disk1/oracle_fra/XE/Autobackup/2015_09_29

  / Disk1/oracle_fra/XE/Autobackup/2015_09_30

  / Disk1/oracle_fra/XE/Autobackup/2015_10_01

  / Disk1/oracle_fra/XE/Autobackup/2015_10_02

  / Disk1/oracle_fra/XE/Autobackup/2015_10_03

  / Disk1/oracle_fra/XE/Autobackup/2015_10_04

  / Disk1/oracle_fra/XE/Autobackup/2015_10_05

  /Disk1/oracle_fra/XE/autobackup/2015_10_04/o1_mf_s_892175488_c11ogk7m_.BKP

  /Disk1/oracle_fra/XE/autobackup/2015_10_05/o1_mf_s_892261919_c149vhn0_.BKP

  / Disk1/oracle_fra/XE/backupset/2015_09_29

  / Disk1/oracle_fra/XE/backupset/2015_09_30

  / Disk1/oracle_fra/XE/backupset/2015_10_01

  / Disk1/oracle_fra/XE/backupset/2015_10_02

  / Disk1/oracle_fra/XE/backupset/2015_10_03

  / Disk1/oracle_fra/XE/backupset/2015_10_04

  / Disk1/oracle_fra/XE/backupset/2015_10_05

  /Disk1/oracle_fra/XE/backupset/2015_10_04/o1_mf_nnndf_TAG20151004T023003_c11ocwg1_.BKP

  /Disk1/oracle_fra/XE/backupset/2015_10_05/o1_mf_nnndf_TAG20151005T023003_c149qwxk_.BKP

  /Disk1/oracle_fra/XE/onlinelog/o1_mf_1_9d4vrb2o_.log

  /Disk1/oracle_fra/XE/onlinelog/o1_mf_2_9d4vrcn4_.log

  /Disk1/oracle_fra/XE/onlinelog/o1_mf_3_9d4vrfbh_.log

  /Disk1/oracle_fra/XE/onlinelog/o1_mf_4_9d4vrgt3_.log

  /Disk1/oracle_fra/XE/onlinelog/o1_mf_6_9d4vr88o_.log

  Now I want to restore the last backup of the database:

  I googled and found this article: How do to restore database Oracle using RMAN (with examples) but do not know what is:

  RMAN > SET DBID 12345;

  Question-1: Which means the VALUE XE 1521 in my case?

  Question-2: Lbooking for a restore script

  
  

  It will be the first time in my career to restore the database

  Thank you in anticipation

  I guess that the following be useful: Oracle Database 11g: example of disaster recovery. When you restore a database from scratch, you need to know and define the DBID to identify the files required for the restoration, which must also match your target database, which is the database or the instance that you want to restore.

• RMAN - restoring Controlfile

  I'm trying to restore a controlfile from an earlier date.

  RMAN > backup controlfile list

  Full 1463953	71.50 M	SBT_TAPE	00:00:26	14 DECEMBER 14 19:27:11
  	BP key: 1463956 status: EXPIRED Tablet: NO Tag: TAG20141214T192638
  	Handle: ctrl_uaipq5s3l_s54610_p1_t866316405 Media: D05771

  Control file included: cash SNA: 32882311416 cash time: 14 December 14 19:26:45

  The following works:

  Run {}

  allocate channel ch10 device type sbt parms = "ENV = (NB_ORA_CLIENT = myhost)"; "

  Restore controlfile to ' / tmp/test03.ctl ' to 'ctrl_uaipq5s3l_s54610_p1_t866316405 ';

  }

  Yet, using the syntax date breaks down

  RMAN > run {}

  2 > allocate channel ch10 device type sbt parms = "ENV = (NB_ORA_CLIENT = myhost)"; "

  3 > set up to that time ' TO_DATE (December 14, 2014 19:26:45 ',' dd/mm/yyyy hh24:mi:ss') ";

  4 > restore controlfile to ' / tmp/test04.ctl ';

  {5 >}

  allocated channel: ch10

  channel ch10: sid = 976 devtype = SBT_TAPE

  channel ch10: Veritas NetBackup for Oracle - version 7.1 (2011020313)

  executing command: SET until clause

  From restoration to February 26, 15 14:41:34

  output channel: ch10

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the restore command at 26/02/2015 14:41:35

  RMAN-06026: some targets not found - abandonment of restoration

  RMAN-06101: no channel to restore a backup or a copy of the control file

  I'm set the same channel on tape, but the 2nd syntax fails.

  Anyone has any idea why?

  Change the status of your backup controlfile AVAILABLE with this command:

  BACKUP OF CONTROLFILE CHANGE TAG "TAG20141214T192638" AVAILABLE;

• Question of RMAN restore points

  Hello

  I'm on the 11.2.0.3 Oracle database. Currently, we have RMAN scripts that make incremental backups and weekly/monthly full daily. My daily script is as below:

  {
   allocate channel t1 type 'sbt_tape' parms 'ENV=(TDPO_usrFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.usr)';
   allocate channel t2 type 'sbt_tape' parms 'ENV=(TDPO_usrFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.usr)';
   allocate channel t3 type 'sbt_tape' parms 'ENV=(TDPO_usrFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.usr)';
   backup format 'prod_dailybackup_%d_%s_%t' incremental level 1 database;
   backup format 'prodarchbackup_%d_%s_%t' archivelog all not backed up 1 times;
   crosscheck backup;
   crosscheck archivelog all;
   delete noprompt obsolete;
   delete noprompt expired backup;
   delete noprompt expired archivelog all;
   report schema;
   release channel t1;
   release channel t2;
   release channel t3;
  }
  

  And the script to backup weekly as below:

  {
   allocate channel t1 type 'sbt_tape' parms 'ENV=(TDPO_usrFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.usr)';
   allocate channel t2 type 'sbt_tape' parms 'ENV=(TDPO_usrFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.usr)';
   allocate channel t3 type 'sbt_tape' parms 'ENV=(TDPO_usrFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.usr)';
   backup incremental level 0 format 'prod_weeklybackup_%d_%s_%t'  database;
   backup format 'prodarchbackup_%d_%s_%t' archivelog all not backed up 1 times;
   release channel t1;
   release channel t2;
   release channel t3;
  }
  

  My two questions are:

  1. can I add a "restore point" for the backup script daily, without the clause "keep until the"?

  2. can I add a restore point whose name is generated dynamically, for weekly backup, for example: weekly_rest_point_13082013, including therefore the current date?

  Concerning

  Dula

  Hello

  1. can I add a "restore point" for the backup script daily, without the clause "keep until the"?

  I think not, is to keep to the required field

  2. can I add a restore point whose name is generated dynamically, for weekly backup, for example: weekly_rest_point_13082013, including therefore the current date?

  Don't you cannot assign the dynamic name in name of the restore point.

  It should be as it is to say

  
  RMAN> run {
  backup database TAG 'MY_BKP' keep UNTIL TIME "TO_DATE('18-AUG-2013','DD-MON-YYYY')"  RESTORE POINT MY_BKP_130813;
  }2> 3> 
  
  Starting backup at 13-AUG-13
  
  using channel ORA_DISK_1
  backup will be obsolete on date 18-AUG-13
  archived logs will not be kept or backed up
  channel ORA_DISK_1: starting full datafile backup set
  channel ORA_DISK_1: specifying datafile(s) in backup set
  input datafile file number=00002 name=/home/oracle/app/oracle/oradata/orcl/ddtest_sysaux01.dbf
  input datafile file number=00001 name=/home/oracle/app/oracle/oradata/orcl/ddtest_system01.dbf
  input datafile file number=00003 name=/home/oracle/app/oracle/oradata/orcl/ddtest_undotbs01.dbf
  input datafile file number=00004 name=/home/oracle/app/oracle/oradata/orcl/dd_users01.dbf
  channel ORA_DISK_1: starting piece 1 at 13-AUG-13
  channel ORA_DISK_1: finished piece 1 at 13-AUG-13
  piece handle=/home/oracle/RMAN/ddtest_l0_t823313030_s27_p1.rmn tag=MY_BKP comment=NONE
  channel ORA_DISK_1: backup set complete, elapsed time: 00:00:26
  
  using channel ORA_DISK_1
  backup will be obsolete on date 18-AUG-13
  archived logs will not be kept or backed up
  channel ORA_DISK_1: starting full datafile backup set
  channel ORA_DISK_1: specifying datafile(s) in backup set
  including current control file in backup set
  channel ORA_DISK_1: starting piece 1 at 13-AUG-13
  channel ORA_DISK_1: finished piece 1 at 13-AUG-13
  piece handle=/home/oracle/RMAN/ddtest_l0_t823313057_s28_p1.rmn tag=MY_BKP comment=NONE
  channel ORA_DISK_1: backup set complete, elapsed time: 00:00:02
  Finished backup at 13-AUG-13
  
  RMAN> alter database open;
  
  database opened
  
  RMAN> LIST RESTORE POINT ALL;
  
  SCN              RSP Time  Type       Time      Name
  ---------------- --------- ---------- --------- ----
  1111046                               13-AUG-13 MY_BKP_130813
  

• RMAN restore error - recovery of media asking unknown journal: thread 1 seq 7

  IM using RMAN to copy a database to another server. The new server is IDENTICAL to the former. By identical I mean she has the same break the name, ip address, operating system, directory structure and the Oracle version.
  
  The new server has already created instance, (same name as the old server example, paths etc.)
  
  The backup files have been restored manually on the new server, the same places that they were on the old. (RMAN makes a backup controlfile automatic and also the archivelogs on the old server).
  
  Ive restored the control file to the new server from the elements of RMAN backup.
  
  Ive cataloged items of RMAN backup on the new server.
  
  I know that the last available in the backup of the archivelogs sequence running on the new server:
  
  backup from the list of the archivelog all;
  
  List of backup sets
  ===================
  
  Time of accomplishment time BS key size Device Type
  ------- ---------- ----------- ------------ ---------------
  14,43 5 M DISK 00:00:03 11 MAY 11
  BP key: 9 situation: AVAILABLE Tablet: NO Tag: TAG20110511T163502
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\BACKUPSET\
  011_05_11\O1_MF_ANNNN_TAG20110511T163502_6WOC5833_. BKP
  
  List of newspapers archived on backup the value 5
  The next time that THRD Seq YVERT low low time next YVERT
  ---- ------- ---------- --------- ---------- ---------
  1 2 550217 10 MAY 11 556559 11 MAY 11
  1 3 556559 11 MAY 11 559776 11 MAY 11
  1 4 559776 11 MAY 11 560093 11 MAY 11
  1 5 560093 11 MAY 11 560794 11 MAY 11
  
  Time of accomplishment time BS key size Device Type
  ------- ---------- ----------- ------------ ---------------
  RECORD OF 15.50 K 7 00:00:01 11 MAY 11
  BP key: 10 location: AVAILABLE Tablet: NO Tag: TAG20110511T163653
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\BACKUPSET\
  011_05_11\O1_MF_ANNNN_TAG20110511T163653_6WOC8PMP_. BKP
  
  List of newspapers archived in backup set 7
  The next time that THRD Seq YVERT low low time next YVERT
  ---- ------- ---------- --------- ---------- ---------
  1 6 560794 11 MAY 11 560851 11 MAY 11
  
  
  So far its all perfectly fine.
  
  Now I want to restore the data files and recover. So I ran:
  
  RMAN run {restore database; recover database; alter database open resetlogs ;}}
  
  This gave me the result below is going very well, but I get a final error, I think that the error is because its search for an archive log that is not in the backup set, but it should be. However, I think 560851 SNA is for a journal that had not yet been created on the old server when the backup was run?
  
  I address, how to fix the error? Its interesting to note the journal, "archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\ARCHIVELOG".
  \2011_05_11\O1_MF_1_6_6WOK1X4W_. ARCH-recid = 10 = 750881741 "stamp is not on the old server or which explains why this isn't in the backup set.
  
  I can do an alter database open reset connects but Id prefer to know why its failure.
  
  
  Any help would be appreciated.
  
  ........................................................
  
  
  RMAN > run {restore database, recover databases; alter database open resetlogs ;}}
  
  From restoration to 11 May 11
  using channel ORA_DISK_1
  
  channel ORA_DISK_1: from datafile backupset restoration
  channel ORA_DISK_1: specifying datafile (s) to restore from backup set
  restoring datafile 00001 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\SAT\SYSTEM01. DBF
  restoring datafile 00002 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\SAT\UNDOTBS01. DBF
  restoring datafile 00003 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\SAT\SYSAUX01. DBF
  restoring datafile 00004 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\SAT\USERS01. DBF
  channel ORA_DISK_1: backup C:\ORACLE\PRODUCT\10.2.0\FLASH_REC piece reading
  OVERY_AREA\SAT\BACKUPSET\2011_05_11\O1_MF_NNNDF_TAG20110511T163507_6WOC5CM7_. BKP
  
  channel ORA_DISK_1: restored the backup part 1
  room handle=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\BACKUPSET\2011_05_
  11\O1_MF_NNNDF_TAG20110511T163507_6WOC5CM7_. Tag BKP = TAG20110511T163507
  channel ORA_DISK_1: restore complete, duration: 00:00:55
  Restoration finished in 11 May 11
  
  
  From back to 11 May 11
  using channel ORA_DISK_1
  
  starting media recovery
  
  channel ORA_DISK_1: from the archives to default destination log restore
  channel ORA_DISK_1: restore the newspaper archive
  archive log thread = 1 sequence = 6
  channel ORA_DISK_1: backup C:\ORACLE\PRODUCT\10.2.0\FLASH_REC piece reading
  OVERY_AREA\SAT\BACKUPSET\2011_05_11\O1_MF_ANNNN_TAG20110511T163653_6WOC8PMP_. BKP
  
  channel ORA_DISK_1: restored the backup part 1
  room handle=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\BACKUPSET\2011_05_
  11\O1_MF_ANNNN_TAG20110511T163653_6WOC8PMP_. Tag BKP = TAG20110511T163653
  channel ORA_DISK_1: restore complete, duration: 00:00:01
  archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\ARCHIVELOG
  \2011_05_11\O1_MF_1_6_6WOK1X4W_. Wire ARC = 1 sequence = 6
  default channel: delete records or newspapers
  archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\ARCHIVELOG
  \2011_05_11\O1_MF_1_6_6WOK1X4W_. ARCH-recid = stamp 10 = 750881741
  Cannot find the log archiving
  archive log thread = 1 sequence = 7
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the command recover at 11/05/2011 18:15:42
  RMAN-06054: recovery of media asking unknown journal: thread 1 seq 7 lowscn 560851
  
  RMAN >
  
  Published by: user12173666 on May 11, 2011 10:28

  He asked all of the available archives, whenever you give the database recovery, he keeps searching for the next archives, actually these archives are not yet generated, then you can ignore.

  Now just connect to SQL and give

  SQL > alter database open resetlogs;

  It should work.

• RMAN restore different localization files

  Hello
  
  In backups rman, I kept it 3 /disk1,/disk2,sbt.now backup location I want to restore the datafile file or archive of the only place/disk2. How can I do this. I don't want to give the backupset name or tag etc etc. I can do affect channel to disk2.when I'm pointing to/disk2, she sits still for /disk1.
  
  Help, please
  
  Concerning

  You can not order from catalogue on the RMAN command line. The command line you entered does not work because it is simply wrong.

  Also regarding your request

  Three methods
  1 use a tag
  2 set up to what SNA or something pointing to the RCS of the backup located on disk2
  3 uncatalog all backups located on other drives
  4 restore a controlfile with only information about the backups on disk2

  Chinar does not understand allocate channel only processes of backup destinations.
  --------
  Sybrand Bakker
  Senior Oracle DBA