RMAN restore % complete query

Similar Questions

• How to validate a rman restore?

  Hi gurus,
  
  IM using 11.2.0.3 database oracle under redhat 5.3.
  
  I do every Monday and Thursday prod of a restore/recovery with a full backup of database to test the database (in a different server).
  
  I think I can use a view or a table to check if the restore was successful or not with this script:
  
  Select end_time, status, input_type
  v $ rman_backup_job_details
  where input_type <>'ARCHIVELOG;
  
  For example, I did a restore 12 and 15 this week, but it is appear:

  END_TIME  STATUS                  INPUT_TYPE
  --------- ----------------------- -------------
  10-NOV-12 COMPLETED               DB FULL
  11-NOV-12 COMPLETED               DB FULL
  12-NOV-12 COMPLETED               DB FULL
  13-NOV-12 COMPLETED               DB FULL
  14-NOV-12 COMPLETED               DB FULL
  15-NOV-12 COMPLETED               DB FULL

  Why does appear other days if I omitted 'ARCHIVELOGS', is there another way to query only the result of rman backup restore/recovery?

  You can filter the output, something like this:

  select OUTPUT,
    case
      when upper(output) like '%RESTORE COMPLETE%' then 'completed'
      when UPPER(OUTPUT) LIKE '%FINISHED RESTORE%' then 'completed'
      else 'error'
    end
  from v$rman_output
  where
       upper(output) like '%RESTORE COMPLETE%' OR
       UPPER(OUTPUT) LIKE '%FINISHED RESTORE%'
   OR (
  -- to avoid the controled erros you are having:
                                     SUBSTR(upper(output),1,5) = 'RMAN-'  AND
                                     SUBSTR(UPPER(OUTPUT),6,5) <> '00571' AND
                                      SUBSTR(UPPER(OUTPUT),6,5) <> '00569' AND
                                      SUBSTR(UPPER(OUTPUT),6,5) <> '03002' AND
                                      SUBSTR(UPPER(OUTPUT),6,5) <> '06054'
       );
  

• RMAN restore: what is the DBID?

  Hello

  There were a few problems with plesk on our server and there is no way except the OS reload. Here is the log for each backup car of the day:

  XE Backup Journal

  Recovery Manager: release 11.2.0.2.0 - Production on Mon Oct 5 02:30:02 2015

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

  connected to target database: XE (DBID = 2713545907)

  RMAN >

  echo on

  RMAN > configure redundancy 2 retention policy;

  using the control file of the target instead of recovery catalog database

  RMAN old configuration settings:

  CONFIGURE REDUNDANCY 2 RETENTION STRATEGY;

  new RMAN configuration settings:

  CONFIGURE REDUNDANCY 2 RETENTION STRATEGY;

  new RMAN configuration settings are stored successfully

  RMAN > configure controlfile autobackup format clear device type disk;

  RMAN configuration settings are reset to the default value

  RMAN > configure controlfile autobackup on;

  RMAN old configuration settings:

  CONFIGURE CONTROLFILE AUTOBACKUP

  new RMAN configuration settings:

  CONFIGURE CONTROLFILE AUTOBACKUP ON;

  new RMAN configuration settings are stored successfully

  RMAN > sql "create pfile =" / u01/app / . Oracle / Product/11.2.0/XE/DBS/ " spfile2init.ora" of spfile ";

  sql statement: create pfile = "/ u01/app / Oracle / Product/11.2.0/XE/DBS/ spfile2init.ora "of spfile

  RMAN > backup backupset device type disk database;

  From backup October 5, 15

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 114 type device = DISK

  channel ORA_DISK_1: from full data file backup set

  channel ORA_DISK_1: specifying datafile (s) in backup set

  file number of the input data file = 00001 = / var/oradata/XE/system name. DBF

  file number of the input data file = 00002 name = / var/oradata/XE/sysaux. DBF

  file number of the input data file = 00003 name = / var/oradata/XE/undotbs1. DBF

  Enter a number of file datafile = name=/var/oradata/XE/users.dbf 00004

  channel ORA_DISK_1: starting total, 1-5 October 15

  channel ORA_DISK_1: finished piece 1 at 5 October 15

  piece handle = / var/oracle_fra/XE / backupset/2015_10_05/o1_mf_ nnndf_TAG20151005T023003_ c149qwxk_.BKP tag = TAG20151005T023003 comment = NONE

  Channel ORA_DISK_1: backup complete set, time: 00:01:56

  Finish backup October 5, 15

  From control file and SPFILE Autobackup 5 October 15

  piece handle = / var/oracle_fra/XE / backup automatic/2015_10_05/o1_mf_s_ 892261919_c149vhn0_.BKP comment = NONE

  File control finished and Autobackup SPFILE to 5 October 15

  RMAN > configure controlfile autobackup.

  RMAN old configuration settings:

  CONFIGURE CONTROLFILE AUTOBACKUP ON;

  new RMAN configuration settings:

  CONFIGURE CONTROLFILE AUTOBACKUP

  new RMAN configuration settings are stored successfully

  RMAN > delete noprompt obsolete;

  RMAN retention policy apply to the order

  RMAN retention policy is set to 2 redundancy

  using channel ORA_DISK_1

  Radiation of the obsolete following backups and copies:

  Making key time filename/handle type

  -------------------- ------ ------------------ --------------------

  Backup Define 1265 3 October 15

  Backup piece 1265 3 October 15/var/oracle_fra/XE/backupset /2015_10_03/o1_mf_nnndf_TAG20151003T023003_c0z0zwm9_. BKP

  Log archiving 669 3 October 15/var/oracle_fra/XE/archivelog / 2015_10_03/o1_mf_1_730_ c0z13f0x_.arc

  Backup Define 1266 3 October 15

  Backup piece 1266 3 October 15/var/oracle_fra/XE/autobackup /2015_10_03/o1_mf_s_892089109_c0z1364t_.bkp

  deleted backup room

  backup piece handle = / var/oracle_fra/XE / backupset/2015_10_03/o1_mf_ nnndf_TAG20151003T023003_ c0z0zwm9_.BKP RECID = 1265 STAMP = 892089004

  Delete archived log

  name = archived log file / var/oracle_fra/XE / ARCHIVELOG/2015_10_03/o1_mf_1_ 730_c0z13f0x_.arc RECID = 669 STAMP = 892089118

  deleted backup room

  backup piece handle = / var/oracle_fra/XE / backup automatic/2015_10_03/o1_mf_s_ 892089109_c0z1364t_.BKP RECID = 1266 STAMP = 892089110

  3 items deleted

  RMAN >

  Complete recovery manager.

  Recovery Manager: release 11.2.0.2.0 - Production on Mon Oct 5 02:32:04 2015

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

  connected to target database: XE (DBID = 2713545907)

  RMAN >

  using the control file of the target instead of recovery catalog database

  SQL statement: alter system archive log current

  RMAN >

  Complete recovery manager.

  The data files and RMAN backup files resides on the other HDD that are:

  / var/oradata/XE

  / var/oracle_fra

  I also copied the following files:

  init.ora

  spfile2init.ora

  spfileXE.ora

  Now the OS is reloaded, and I installed oracle from scratch:

  SQL > SELECT * FROM v version $;

  BANNER

  --------------------------------------------------------------------------------

  Oracle Database 11 g Express Edition Release 11.2.0.2.0 - 64 bit Production

  PL/SQL Release 11.2.0.2.0 - Production

  CORE Production 11.2.0.2.0

  AMT for Linux: Version 11.2.0.2.0 - production

  ===================================

  ] # cat/etc/centos-release

  CentOS release 6.7 (Final)

  The following folders/files are on my slave drive:

  oradata/disk1 /.

  / Disk1/oradata/XE

  /Disk1/oradata/XE/control.dbf

  /Disk1/oradata/XE/redo10_01.dbf

  /Disk1/oradata/XE/redo11.dbf

  /Disk1/oradata/XE/redo12.dbf

  /Disk1/oradata/XE/redo13.dbf

  /Disk1/oradata/XE/redo14.dbf

  /Disk1/oradata/XE/redo15.dbf

  /Disk1/oradata/XE/SYSAUX.dbf

  /Disk1/oradata/XE/system.dbf

  /Disk1/oradata/XE/temp.dbf

  /Disk1/oradata/XE/undotbs1.dbf

  /Disk1/oradata/XE/users.dbf

  oracle_fra/disk1 /.

  / Disk1/oracle_fra/XE

  / Disk1/oracle_fra/XE/ARCHIVELOG

  / Disk1/oracle_fra/XE/Autobackup

  / Disk1/oracle_fra/XE/backupset

  / Disk1/oracle_fra/XE/onlinelog

  / Disk1/oracle_fra/XE/ARCHIVELOG/2015_09_29

  / Disk1/oracle_fra/XE/ARCHIVELOG/2015_09_30

  / Disk1/oracle_fra/XE/ARCHIVELOG/2015_10_01

  / Disk1/oracle_fra/XE/ARCHIVELOG/2015_10_02

  / Disk1/oracle_fra/XE/ARCHIVELOG/2015_10_03

  / Disk1/oracle_fra/XE/ARCHIVELOG/2015_10_04

  / Disk1/oracle_fra/XE/ARCHIVELOG/2015_10_05

  / Disk1/oracle_fra/XE/ARCHIVELOG/2015_10_06

  /Disk1/oracle_fra/XE/ARCHIVELOG/2015_10_04/o1_mf_1_731_c11ognk8_.arc

  /Disk1/oracle_fra/XE/ARCHIVELOG/2015_10_05/o1_mf_1_732_c149vo3c_.arc

  /Disk1/oracle_fra/XE/ARCHIVELOG/2015_10_05/o1_mf_1_733_c15dshcn_.arc

  /Disk1/oracle_fra/XE/ARCHIVELOG/2015_10_06/o1_mf_1_734_c18sw1q9_.arc

  / Disk1/oracle_fra/XE/Autobackup/2015_09_29

  / Disk1/oracle_fra/XE/Autobackup/2015_09_30

  / Disk1/oracle_fra/XE/Autobackup/2015_10_01

  / Disk1/oracle_fra/XE/Autobackup/2015_10_02

  / Disk1/oracle_fra/XE/Autobackup/2015_10_03

  / Disk1/oracle_fra/XE/Autobackup/2015_10_04

  / Disk1/oracle_fra/XE/Autobackup/2015_10_05

  /Disk1/oracle_fra/XE/autobackup/2015_10_04/o1_mf_s_892175488_c11ogk7m_.BKP

  /Disk1/oracle_fra/XE/autobackup/2015_10_05/o1_mf_s_892261919_c149vhn0_.BKP

  / Disk1/oracle_fra/XE/backupset/2015_09_29

  / Disk1/oracle_fra/XE/backupset/2015_09_30

  / Disk1/oracle_fra/XE/backupset/2015_10_01

  / Disk1/oracle_fra/XE/backupset/2015_10_02

  / Disk1/oracle_fra/XE/backupset/2015_10_03

  / Disk1/oracle_fra/XE/backupset/2015_10_04

  / Disk1/oracle_fra/XE/backupset/2015_10_05

  /Disk1/oracle_fra/XE/backupset/2015_10_04/o1_mf_nnndf_TAG20151004T023003_c11ocwg1_.BKP

  /Disk1/oracle_fra/XE/backupset/2015_10_05/o1_mf_nnndf_TAG20151005T023003_c149qwxk_.BKP

  /Disk1/oracle_fra/XE/onlinelog/o1_mf_1_9d4vrb2o_.log

  /Disk1/oracle_fra/XE/onlinelog/o1_mf_2_9d4vrcn4_.log

  /Disk1/oracle_fra/XE/onlinelog/o1_mf_3_9d4vrfbh_.log

  /Disk1/oracle_fra/XE/onlinelog/o1_mf_4_9d4vrgt3_.log

  /Disk1/oracle_fra/XE/onlinelog/o1_mf_6_9d4vr88o_.log

  Now I want to restore the last backup of the database:

  I googled and found this article: How do to restore database Oracle using RMAN (with examples) but do not know what is:

  RMAN > SET DBID 12345;

  Question-1: Which means the VALUE XE 1521 in my case?

  Question-2: Lbooking for a restore script

  
  

  It will be the first time in my career to restore the database

  Thank you in anticipation

  I guess that the following be useful: Oracle Database 11g: example of disaster recovery. When you restore a database from scratch, you need to know and define the DBID to identify the files required for the restoration, which must also match your target database, which is the database or the instance that you want to restore.

• RMAN, restoration of ASM no - asm environment!

  Dear friends,

  WE are running Oracle 11 GR 2 CARS as our PRODUCTION server. also, we have a single instance, DATAGUARD, where production data are replicated.

  On the end DATAGUARD, we take a weekly full backup RMAN. My db_name is 'isldb '.

  Now I want to restore the backup, RMAN COMPLETE the DATAGUARD server to a new server NO - ASM using file system normal... For this reason, I have to follow the procedure below:

  (1) take RMAN full backup of DATAGUARD END as a stage to mount and store it on ' / rmanback' file.  I use the below taken backup script:

  Run {}

  allocate channels d1 device type disk format ' / rmanback/isl/$TODAY/df_%U_%T';

  allocate channel device type d2 disc format ' / rmanback/isl/$TODAY/df_%U_%T';

  backup database effective additional 0 CHECK the LOGIC AS BACKUPSET COMPRESS;

  backup format ' / rmanback/isl/$TODAY/controlfile.ctlbk' (current controlfile);

  backup format ' / rmanback/isl/$TODAY/spfile.spbak' (spfile);

  ARCHIVELOG backup all;

  output channel d1;

  output channel d2;

  }

  (2) the transfer of the rman backup complete on a remote server on the same ' / rmanback' file.

  (3) in the new server, I take the scene nomount database using a spfile (spfile has a single entry: 'DB_NAME = isldb')

  (4) then I restore the controlfile successfully:

  [oracle@PRIM ~] target rman $ /.

  Recovery Manager: release 11.2.0.3.0 - Production Wed Aug 20 16:01:21 2014

  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

  connected to target database: ISLDB (unassembled)

  RMAN > restore controlfile to ' / rmanback/isl/20140810_181405/controlfile.ctlbk';

  From restoration to 20 August 14

  using the control file of the target instead of recovery catalog database

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 332 type device = DISK

  channel ORA_DISK_1: restore the control file

  channel ORA_DISK_1: restore complete, duration: 00:00:01

  output file name=/u01/app/oracle/oradata/isldg/control01.ctl

  output file name=/u01/app/oracle/oradata/isldg/control02.ctl

  Finished restore at August 20, 14

  (5) to restore the data successfully file using the command below:

  run

  {

  the value of newname for datafile '+ DATA/isldg/datafile/system.298.849413815' to ' / u01/app/oracle/oradata/isldb/system1.dbf';

  the value of newname for datafile '+ DATA/isldg/datafile/sysaux.295.849413813' to ' / u01/app/oracle/oradata/isldb/sysaux1.dbf';

  the value of newname for datafile '+ DATA/isldg/datafile/undotbs1.296.849413813' to ' / u01/app/oracle/oradata/isldb/undotbs1.dbf';

  the value of newname for datafile '+ DATA/isldg/datafile/undotbs2.297.849413815' to ' / u01/app/oracle/oradata/isldb/undotbs2.dbf';

  the value of newname for datafile '+ DATA/isldg/datafile/users.299.849413849' to ' / u01/app/oracle/oradata/isldb/users1.dbf';

  the value of newname for datafile '+ DATA/isldg/datafile/bu_system_tbs.291.849413617' to ' / u01/app/oracle/oradata/isldb/bu_system_tbs1.dbf';

  the value of newname for datafile '+ DATA/isldg/datafile/bu_his_log_tbs.292.849413617' to ' / u01/app/oracle/oradata/isldb/bu_his_log_tbs1.dbf';

  the value of newname for datafile '+ DATA/isldg/datafile/bu_index_tbs.293.849413617' to ' / u01/app/oracle/oradata/isldb/bu_index_tbs1.dbf';

  the value of newname for datafile '+ DATA/isldg/datafile/bu_image_tbs.294.849413619' to ' / u01/app/oracle/oradata/isldb/bu_image_tbs1.dbf';

  the value of newname for tempfile 1 to ' / u01/app/oracle/oradata/isldb/temp1.dbf';

  restore the database;

  }

  RESTORATION came with success, and all data files store in the folder specified with success.

  (6) now when I recover the database, then I found the below error:

  > SQL > alter database open resetlogs;

  ALTER database open resetlogs

  ERROR on line 1:

  ORA-01157: cannot identify/lock data file 1 - see DBWR trace file

  ORA-01110: data file 1: '+ DATA/isldg/datafile/system.298.849413815 '.

  > SQL > restore database;

  ORA-00283: cool cancelled due to errors

  ORA-01610: recovery using BACKUP CONTROLFILE option must be

  > SQL > restore database until cancel using backup controlfile;

  ORA-00283: cool cancelled due to errors

  ORA-01110: data file 1: '+ DATA/isldg/datafile/system.298.849413815 '.

  ORA-01157: cannot identify/lock data file 1 - see DBWR trace file

  ORA-01110: data file 1: '+ DATA/isldg/datafile/system.298.849413815 '.

  Could someone help me please, how can I recover as open my database?

  Your archivelog was not "missing."  He seems to have a different file name format.

  No one can touch «_allow_resetlogs_corruption» action  You are now on your own.

  Hemant K Collette

• RMAN restore in the State of the mount in Oracle 11 g DB

  I have a question which can be very naïve, it is to confirm if the RMAN restore happens in the mount status of data or can it also happen when the DB is in open State?

  I hope my question is clear what is the eligible state of the database in which the RMAN restore can happen.

  Please get back with the answer to my query.

  
  

  Concerning

  addition of HemantKChitale response

  If you must restore controlfile, restoration can be done with the database OPEN or MOUNT, it should be in NOMOUNT State.

• RMAN restore level 0, 1 incremental level and ARCHIVELOGs

  I can't understand it and I read through the documentation and the web.
  
  On linux 64-bit in 11.2.0.3, I do weekly backups of level 0 and increments of 1 level every night. During the day, I also do ARCHIVELOG backups.
  
  I know I need to restore the LEVEL 0 database files (which I can do it), then later increments of 1 LEVEL of restoration (which I just can't), then apply ARCHIVELOGs (what I do).
  
  My problem is HOW to apply files of database LEVEL 1 of the above LEVEL 0 incremental backups restored?
  
  Thanks in advance!

  default channel: deletion of Journal archives

  And I haven't used the command "recover archivelog deletion of database; I used "recover the database.

  This isn't a problem. At the time of recovery, it is common that you see these messages.

  During restore, RMAN restores the archives at the local site, and finally when the recovery is complete, it deletes the temporarily stored archives.

  rewh2oman
       
  Handle: rewh2oman
  Status level: Beginner
  Join date: January 9, 2007
  Messages total: 87
  Total Questions: 6 (4 pending)
  Name russ

  If you feel that your questions have been answered, then please provide appropriate points and consider the son of closing. Please clean the forum!

• RMAN restore error - recovery of media asking unknown journal: thread 1 seq 7

  IM using RMAN to copy a database to another server. The new server is IDENTICAL to the former. By identical I mean she has the same break the name, ip address, operating system, directory structure and the Oracle version.
  
  The new server has already created instance, (same name as the old server example, paths etc.)
  
  The backup files have been restored manually on the new server, the same places that they were on the old. (RMAN makes a backup controlfile automatic and also the archivelogs on the old server).
  
  Ive restored the control file to the new server from the elements of RMAN backup.
  
  Ive cataloged items of RMAN backup on the new server.
  
  I know that the last available in the backup of the archivelogs sequence running on the new server:
  
  backup from the list of the archivelog all;
  
  List of backup sets
  ===================
  
  Time of accomplishment time BS key size Device Type
  ------- ---------- ----------- ------------ ---------------
  14,43 5 M DISK 00:00:03 11 MAY 11
  BP key: 9 situation: AVAILABLE Tablet: NO Tag: TAG20110511T163502
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\BACKUPSET\
  011_05_11\O1_MF_ANNNN_TAG20110511T163502_6WOC5833_. BKP
  
  List of newspapers archived on backup the value 5
  The next time that THRD Seq YVERT low low time next YVERT
  ---- ------- ---------- --------- ---------- ---------
  1 2 550217 10 MAY 11 556559 11 MAY 11
  1 3 556559 11 MAY 11 559776 11 MAY 11
  1 4 559776 11 MAY 11 560093 11 MAY 11
  1 5 560093 11 MAY 11 560794 11 MAY 11
  
  Time of accomplishment time BS key size Device Type
  ------- ---------- ----------- ------------ ---------------
  RECORD OF 15.50 K 7 00:00:01 11 MAY 11
  BP key: 10 location: AVAILABLE Tablet: NO Tag: TAG20110511T163653
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\BACKUPSET\
  011_05_11\O1_MF_ANNNN_TAG20110511T163653_6WOC8PMP_. BKP
  
  List of newspapers archived in backup set 7
  The next time that THRD Seq YVERT low low time next YVERT
  ---- ------- ---------- --------- ---------- ---------
  1 6 560794 11 MAY 11 560851 11 MAY 11
  
  
  So far its all perfectly fine.
  
  Now I want to restore the data files and recover. So I ran:
  
  RMAN run {restore database; recover database; alter database open resetlogs ;}}
  
  This gave me the result below is going very well, but I get a final error, I think that the error is because its search for an archive log that is not in the backup set, but it should be. However, I think 560851 SNA is for a journal that had not yet been created on the old server when the backup was run?
  
  I address, how to fix the error? Its interesting to note the journal, "archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\ARCHIVELOG".
  \2011_05_11\O1_MF_1_6_6WOK1X4W_. ARCH-recid = 10 = 750881741 "stamp is not on the old server or which explains why this isn't in the backup set.
  
  I can do an alter database open reset connects but Id prefer to know why its failure.
  
  
  Any help would be appreciated.
  
  ........................................................
  
  
  RMAN > run {restore database, recover databases; alter database open resetlogs ;}}
  
  From restoration to 11 May 11
  using channel ORA_DISK_1
  
  channel ORA_DISK_1: from datafile backupset restoration
  channel ORA_DISK_1: specifying datafile (s) to restore from backup set
  restoring datafile 00001 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\SAT\SYSTEM01. DBF
  restoring datafile 00002 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\SAT\UNDOTBS01. DBF
  restoring datafile 00003 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\SAT\SYSAUX01. DBF
  restoring datafile 00004 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\SAT\USERS01. DBF
  channel ORA_DISK_1: backup C:\ORACLE\PRODUCT\10.2.0\FLASH_REC piece reading
  OVERY_AREA\SAT\BACKUPSET\2011_05_11\O1_MF_NNNDF_TAG20110511T163507_6WOC5CM7_. BKP
  
  channel ORA_DISK_1: restored the backup part 1
  room handle=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\BACKUPSET\2011_05_
  11\O1_MF_NNNDF_TAG20110511T163507_6WOC5CM7_. Tag BKP = TAG20110511T163507
  channel ORA_DISK_1: restore complete, duration: 00:00:55
  Restoration finished in 11 May 11
  
  
  From back to 11 May 11
  using channel ORA_DISK_1
  
  starting media recovery
  
  channel ORA_DISK_1: from the archives to default destination log restore
  channel ORA_DISK_1: restore the newspaper archive
  archive log thread = 1 sequence = 6
  channel ORA_DISK_1: backup C:\ORACLE\PRODUCT\10.2.0\FLASH_REC piece reading
  OVERY_AREA\SAT\BACKUPSET\2011_05_11\O1_MF_ANNNN_TAG20110511T163653_6WOC8PMP_. BKP
  
  channel ORA_DISK_1: restored the backup part 1
  room handle=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\BACKUPSET\2011_05_
  11\O1_MF_ANNNN_TAG20110511T163653_6WOC8PMP_. Tag BKP = TAG20110511T163653
  channel ORA_DISK_1: restore complete, duration: 00:00:01
  archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\ARCHIVELOG
  \2011_05_11\O1_MF_1_6_6WOK1X4W_. Wire ARC = 1 sequence = 6
  default channel: delete records or newspapers
  archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\ARCHIVELOG
  \2011_05_11\O1_MF_1_6_6WOK1X4W_. ARCH-recid = stamp 10 = 750881741
  Cannot find the log archiving
  archive log thread = 1 sequence = 7
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the command recover at 11/05/2011 18:15:42
  RMAN-06054: recovery of media asking unknown journal: thread 1 seq 7 lowscn 560851
  
  RMAN >
  
  Published by: user12173666 on May 11, 2011 10:28

  He asked all of the available archives, whenever you give the database recovery, he keeps searching for the next archives, actually these archives are not yet generated, then you can ignore.

  Now just connect to SQL and give

  SQL > alter database open resetlogs;

  It should work.

• confusion about rman restore

  Hello world
  I have some confusion about rman restore and recover procedures. I read doc available in this regard and google as well. A few more questions unanswered in my mind.
  1. do the restore backup command restore controlfile also alongwith datafiles.
  2 database is running in noarchivelog mode. Suppose one of say users.dbf data files has been removed. control files intact. the same seq # is available since the last log backup. Now to restore the database, I use the following steps.
  1 rman > shutdown immediate
  2 rman > startup mount
  3 rman > restore database
  4 rman > restore database
  5 rman > alter database open;
  
  I'm wrong. This is the one. In this scenario, the steps above can be used.
  
  3. even when logseq is not available when the database is saved, I take the following steps.
  1 rman > startup nomount;
  2 rman > restore controlfile autobackup.
  3 rman > change the editing of the database;
  4 rman > restore database;
  5 rman > recover noredo db;
  6 rman > alter database open resetlogs;
  It is a right. can I adopt this procedure in my scenario.
  
  Please do not give all the links I want some explanation of your minds.
  
  Geetanjali.

  sonidba wrote:
  Hello world
  I have some confusion about rman restore and recover procedures. I read doc available in this regard and google as well. A few more questions unanswered in my mind.
  1. do the restore backup command restore controlfile also alongwith datafiles.
  2 database is running in noarchivelog mode. Suppose one of say users.dbf data files has been removed. control files intact. the same seq # is available since the last log backup. Now to restore the database, I use the following steps.
  1 rman > shutdown immediate
  2.RMAN > startup mount
  3.RMAN > restore database
  4.RMAN > restore database
  5.RMAN > alter database open;

  I'm wrong. This is the one. In this scenario, the steps above can be used.

  If after the last COLD backup is there not get command of newspaper (this means journal seq number is the same), so you can restore your database since the last backup and can retrieve it. And if thi does not need perform full restoration/recovery. At instead step 3 with DATA RESTORE (or RESTORE TABLESPACE USERS) file and step 4 instead with RECOVER DATAFILE (or RECOVER TABLESPACE USERS) and after that you can open the database by using ALTER DATABASE OPEN. If you have lost datafile users.dbf it means that this (tablespace) datafie has been automatically disconnected.

  3. even when logseq is not available when the database is saved, I take the following steps.
  1 rman > startup nomount;
  2 rman > restore controlfile autobackup.
  3.RMAN > change the editing of the database;
  4 rman > restore database;
  5 rman > recover noredo db;
  6 rman > alter database open resetlogs;
  It is a right. can I adopt this procedure in my scenario.

  Yes you are right in this case. There, you have to restore/recovery complete database, because of your database running in NOARCHIVELOG mode. But after database restore (step4) you can just issue RESTORE database and can open with RESETLOGS options also. Also if you have incremental backups can run NOARCHIVELOG mode even RETRIEVE the NOREDO of DATABASE then you can open the database.

• Had to do a restoration complete my xp machine and will not update, in the past, system automatically updated with cartridges of siema etc service?

  Had to do a restoration complete my xp machine and will not update, in the past, system automatically updated with cartridges of siema etc service?

  What is happening, it is that it is so more the possibility of a user friendly hands on automatic update of Windows XP from a clean install.  Windows Update will NOT synchronize with and updated in the current order status to update a machine with a clean install of XP, but you separately download some patches and intermediate updates and apply them manually, to have a machine that connects a bit normally with Windows Update.

  Install the last update cumulative security for the version of Internet Explorer you have currently is essential, and you need to download separately and install it before going any further.

  http://support.Microsoft.com/kb/2888505

  Scroll to the information file for XP and Server 2003

  Download the file corresponding to your version of Internet Explorer and install first.

  It is also highly recommended that you install Firefox because IE8 is limited, probably compromised and sometimes useless and will crash on many sites, including Microsoft sites, including linked just above.

• Did a system restore complete with built-in recovery partition on the hard drive, the recovery went well, but the computer is still slow and freezing.

  Original title: computer always slow and freezing after clean install

  It is a compaq 2007 desktop running windows vista premium, I work on it for a friend, they said he was running slow and freezing up all the time so I just went ahead and did a system restore complete with built-in recovery partition on the hard drive, the recovery went well but still have the same problems with the computer being slow and freezing up. any help would be appreciated thanks.

  Hello

  
  Step 1: I suggest you try the steps in the Sub articles to solve the problem of vista performance.
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-computer-speed-and-performance-information
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-maximum-performance-from-Windows-Vista-from-Windows-Vista-inside-out
  Step 2: You can also check if the problem persists in the clean boot state.
  
  Put your boot system helps determine if third-party applications or startup items are causing the problem.
   
  Try the steps in step 1 in the article to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Restore complete PC - either does not start or before restoration, said "the disk is defined as active in the BIOS is too small to recover the original system drive."

  I am trying to restore an image backup Vista 64 is 428 GB, the drive under restoration is a Velociraptor 2x300GB RAID 0 (about 558 GB under Windows), and the drive on which the image originated was is labeled as a 750 GB drive (actually about 698 GB / 433 GB used). When I first made the attempt I got some message on the target drive, have to be cleaned by diskpart, so I did. After that, I was able to complete the restoration - but after the restoration, at startup, I get the message:

  "Reboot and select proper boot device or insert boot media in selected bootable media and press a key.

  And under Windows, the drive does not appear. Disk Management displays the disk as unallocated space. So I added a new Simple Volume and then tried the new restoration. But now I get the message:

  "The drive is set as enabled in the BIOS is too small to recover the original system drive."

  Even if the restore completed successfully after cleaning, the drive is empty, and the player has more than 100 GB more space than the size of the image. After the restoration after the own, why can't it detect the boot sector; and if I try to restore after formatting, why do we say that the disc is too small? How can I successfully restore?

  Hello

  We can see the suggestion of Ryun on the link below and check if this helps solve the problem.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/9a968d83-Ca5a-4a71-85e2-a013d209c713

  See also:

  http://TechNet.Microsoft.com/en-us/library/cc754015 (WS.10) .aspx

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• System Restore: what point I choose theactionalways does not restore complete

  What point I choose theactionalways does not restore complete

  Try to restore the system in Safe Mode.

  Shut down your pc (if you can't for some reason any then press and hold in the power switch until the pc shurs)

  Now start pc you and start immediately to press the key F8.

  you will be presented with a new screen where you can choose Safe mode (use the arrow keys on your keyboard to navigate through the screen)

  Now restore your system.

  * Very often Norton users have problems, perform a system restore, an error of "restoration incomplete... your computer can not be restored"would be seen after trying a restore point. " New versions of Norton have a setting where you can uncheck/disable 'symprotect anti-forgery protection. " ... older versions have "enable protection for my Symantec product." ... Uncheckiing should be temporarily. Unchecking these settings would mean you wouldn't need to go into safe mode to try the restore.

  More information here;

  http://bertk.MVPs.org/html/symantecdoc1.html

• I did a backup of the computer on my old HD 110 GB. Install a new 500 GB HD and restore complete pc but windows onliy see the 100 GB on the C drive and the 9.99 on the D drive that were on my old HD and do not see the additional 400 GB. How can I solve th

  I did a backup of the computer on my old HD 110 GB. Install a new 500 GB HD and restore complete pc but windows onliy see the 100 GB on the C drive and the 9.99 on the D drive that were on my old HD and do not see the additional 400 GB. How I can solve this problem.

  Hi abgolf3,

  The question may be how the new hard drive has been formatted.  Take a look at the way in which the reader is implemented by clicking Start > Control Panel > Administrative Tools > double-click on computer management > double-click storage.  Is all the space on the disk are responsible?  If so, take a look at these two documents for your problem:

  Mark a partition as active

  Format a hard drive or partition to NTFS format

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dungeon of "system restore completed successfully" message appear, wheb ever I turn on my netbook.

  Hi there recently to use "System Restore" option to fix my USB dvd driver Issos, it has been altered and my dvd rom usb does not work, I was able to fix it with the system restore. But after the message "system restore completed successfully" keep popping up every time I start my netbook and will not stop appear. It will disappear at some point? or something needs to be repaired? I have Windows 7 on an Asus net book. Is works very well, but it just bothers me that pop up message, everytime I turn on my net book.

  Please help me if you can.

  Thank you

  Hello:

  Thank you very much for taking your time to help me, I really appreciate it. my net book seem to be starting now normal after an update of the small window 7, not sure because it is the patch or the 'message' is the time to come for 48 hours, but never the less, thank you. If anyone has the same experience please let me know, I would like to know if it was just a feature of Windows 7 or not.

  Thank you all

• RMAN restore and recovery

  Hello

  If I have two full backups in my FRA (say 7 to 14 days)

  Q1. I assume that if I run it.

  RMAN > restore database;

  It will go to the last backup (7 days ago)?

  Q2. How to restore the backup of ago 14 days instead?

  Q3. If I restore the database of 14 days but then question

  RMAN > recover database until < 3 days >

  RMAN would simply apply the recovery logs archived for 14 days to the point of recovery or it would be smart enough to realize, there a backup to restore all first 7 days ago, then apply 7 days recovery logs, to the point of recovery?

  Q4. Can you do an online backup as a copy of the Image instead of a backup set or you can offline backups when you use a copy of the Image?

  All wisdom, greatly appreciated

  Jim

  (1) switching is not required for recovery. You have just enough do to standardize the data files. It doesn't matter if the switch is produced or not.

  (2) "extra small set of archivelogs" can be enormous if the backup is long-term with many DML during backup.

  You need a sufficiently archivelogs, regardless of the copy backupset or image, to make the data files in compliance.

  (3) hot RMAN copy backup data files, while they are updated, but in order to avoid a block inconsistent read to avoid corruption. The data files are not frozen, as with the hot user managed backup.