Take a multiple snapshot of different VM´s

Similar Questions

• Photos of virtual machines with multiple disks on different LUNS - Question

  I have some questions on how to manage the snapshots of virtual machines with multiple disks on different LUNS.  First of all, the LUNS are VMFS.  We are just starting to add virtual machines with dedicated for data storage format VMFS LUNS.  I don't think an extra space must be made for snapshots, as well as at least 100 GB LUN is required to store the data, and then say, add about 25 to 50% of this amount?  Set the 100 GB vmdk file but have the GB from 25 to 50 additional disk space for snapshots, if necessary (rather than just to get a unit number logic needed 100 GB of data and devote all of the 100 GB to the vmdk file).  In addition, if a virtual machine has several files vmdk on different LUNS, which will be a problem to take a snapshot, and is it possible to do just a snapshot of a disk of a virtual computer (as the volume of the BONE)?

  Thanks for any help.

  Snapshot files are created in the home folder of the VM by default for all virtual disks, no matter on what data store they are. You must make sure you have enough free disk space on the data store for snapshots.

  If you want to exclude a virtual disks of taking snapshots, you can set it to 'Independent' - 'Persistent' machine virtual settings to the HARD drive.

  André

• Small Noob Question - multiple snapshots

  VMware Server 2 using the Web interface to manage my VMs, I see the following commands under the snapshot:

  Take a snapshot

  Go back to the snapshot

  Remove the snapshot

  I took several shots.  but when choosing to go back to the snapshot, it is only up to the last snapshot.  Also withdrawal snapshot deletes the last snapshot.  Is it not possible to have multiple snapshots in this version of VMWare? TIA!

  VMware Server 1 and 2 have only the ability to 1 snapshot.  (A limitation of design from the beginning.)  If you need multiple snapshots, you must change for ESX (i) or workstation (or merge if you have a Mac).

• Cannot print multiple documents of different types of files in Windows 7 Explorer

  In Windows XP Explorer, I was able to select multiple files of different types, right-click and select print.  In Windows 7 64 bit and Office 2007, the selection of print is missing when I right click except if all files are of the same type, i.e. all the Word Document or Excel Documents.

  Hello

  Here are some links that may prove beneficial.

  http://support.Microsoft.com/kb/943336

  http://support.Microsoft.com/kb/160592

  http://social.answers.Microsoft.com/forums/en-us/wordshare/thread/a5d17d09-ce08-452A-9b75-3c8490b74c7a

  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How do you take a deposit which is different from that of the monthly payments?

  I have a client who is in British Colombia and moved to Infusionsoft.

  At that time there BC might not take a deposit which was different from that of the monthly payments.

  Whenever they would have to manually set up the payments. They do not want to manually set up the payments.

  Is it possible to automatically install these progress payments in British Colombia now?

  Hi Tim

  Support to this recurrent stage of payments (with a different cycle types - daily, monthly, annual, etc.) but not progressive payments BC.

  Silviu

• Playback of multiple files with different file extensions

  Hi all

  Is there a way where we can read multiple files with different file extensions using file adapter?

  
  
  < property name = value=".*\.csv"IncludeFiles"/ >
  

  Can include us a few models more file in the property above? Please let me know

  Yes you can. .

  But here, the thing you need to do is all these files must have the same format (XSD)

  You can dynamically pass the name of the file to invoke the activity of the file that is the property of jca.file.filename

  The value given when you set up the adapter will be written by this value. .

  Hope this will help you

  If this is not the case, let me know. .

  Thank you & best regards

  Sharath Kumar

• How can I send docs to multiple signatories with different addresses on sign of Echo?

  How can I send docs to multiple signatories with different addresses on sign of Echo?

  Hello

  In EchoSign, you simply have to add e-mail addresses to each signatory in the box 'To' and set the saved order. If you have to close, you must enter your last e-mail address and check the box "I need to sign. The shape that you send must have signature of blocks for each signatory but apart from that, there are other special rules or the necessary implementation. If you continue to experience problems try this, detail your problem here and I'll do what I can to help.

  See you soon!

  EchoSign-Rob!

• How to watermark multiple images with different dimensions in Photoshop?

  Is there a way I can place a watermark on the bottom right of the multiple images, any size images? I tried to use Photoshop Scripts > image processor, but it only works for images of the same size. I want to put the watermark on multiple images of different sizes. It is the output I got.

  For the first image watermark placed properly, but for the second picture watermark is distracted. As you can clearly see the dimensions are different. Please suggest me a solution.

  

  

  As this video should help you.

  How to watermark multiple images in Photoshop CS6 - YouTube

• Display of multiple snapshots?

  In develop mode, is it possible to see/compare multiple snapshots of an image?

  Side by side - not so make virtual copies

• Multiple snapshots

  Someone remind me how best to do so. I found a virtual machine that has 6 shots dating back to November. We want to keep any changes.

  I have to go back and committed each of them in the order (oldest to newest?) Or just hire the newest one?

  Just a little backwards, but that's ok.  So if you take five snapshots n them sequentially over a period of five days and you wanted to commit to the current state of the machine you would remove 5, then 4, then 3, then 2 and finally 1.  I know it seems backwards, but it's the way that you are able to turn back the clock, if you wanted to snapshot 3 and validate these changes if you want to.

  If you really want to learn how to work the snapshots create a test computer and create some shots and some branching off to.  Open Notepad and create different documents allowing them to save money, but also leave them open for the screenshot displays on the thumbnail on each of them.

  SID Smith-

  VCP, CCA (Server Xen), Hyper-V & SCVMM08 MCTS, CCNA and VTSP

  http://www.dailyhypervisor.com

  • Don't forget to assign points for correct and useful responses.

• The ipad pro supports multiple monitors with different content on each screen?

  I want to replace my laptop with an ipad pro.  Currently I drive three screens with my laptop, all with different content (VGA, HDMI, laptop screen) with no additional adapters.  The Ipad pro has a video card that will allow me to run multiple monitors (3 including the pro) with different content on each monitor?

  Given that the pro iPad running iOS and iOS do not supports multiple monitors, I would say no. I may be wrong, so feel free to correct me.

• ASA 5510 VPN multiple tunnels through different interfaces

  Is it possible to create VPN tunnels on more than one interface to an ASA (specifically 5510 with 8.4), or I'm doing the impossible?

  We have 2 public interfaces on our ASA connected to 2 different suppliers.

  We must work L2L tunnels of the SAA for remote offices through the interface that is our ISP 'primary' and also used as our default gateway for internet traffic.

  We are trying to install a remote office use our secondary connection for its tunnel (office of high traffic we would prefer separate away from the rest of our internet and VPN traffic).

  I can create the tunnel with the ACL appropriate for traffic tunnel, card crypto, etc., put in place a static route to force ASA to use the secondary interface for traffic destined for the public of the remote gateway IP address, and when I finished, traffic initiated by the remote site will cause the tunnel to negotiate and find - I can see the tunnel in Show crypto ikev1 his as L2L answering machine MM_ACTIVE , Show ipsec his with the right destination and correct traffic local or remote identities for interesting, but the ASA local never tries to send traffic through the tunnel.  If I use tracers of package, it never shows a VPN that is involved in the trafficking of the headquarters in the remote desktop, as if the SAA is not seeing this as for the corresponding VPN tunnel traffic.

  If I take the exact same access and crypo card statements list and change them to use the primary ISP connection (and, of course, change the remote desktop IP connects to), then the connection works as expected.

  What Miss me?

  Here is a sample of the VPN configuration: (PUBLIC_B is our second ISP link, 192.168.0.0/23 is MainOffice 192.168.3.0/24 is FieldOffice)

  permit access list range 192.168.0.0 PUBLIC_B_map 255.255.254.0 192.168.3.0 255.255.255.0

  NAT (Inside, PUBLIC_B) static source MainOffice MainOffice static FieldOffice FieldOffice

  card crypto PUBLIC_B_map 10 corresponds to the address PUBLIC_B_map

  card crypto PUBLIC_B_map 10 set counterpart x.x.x.x

  card crypto PUBLIC_B_map 10 set transform-set ESP-3DES-SHA ikev1

  PUBLIC_B_map PUBLIC_B crypto map interface

  tunnel-group x.x.x.x type ipsec-l2l

  tunnel-group ipsec-attributes x.x.x.x

  IKEv1 pre-shared-key *.

  Route PUBLIC_B x.x.x.32 255.255.255.224 y.y.y.y 1

  If I take this same exact configuration and change it to use PUBLIC (our primary connection) instead of PUBLIC_B, remove the instruction PUBLIC_B route and change the desktop to point to the ip address of the PUBLIC, then everything works, so my access list and crypto map statements must be correct.

  What I don't understand is why the ASA Head Office does not seem to recognize interesting for the tunnel traffic when the tunnel is for the second ISP connection, but works when it is intended for the main ISP.  There is no problem of connectivity with the ISP Internet B - as mentioned previously, the tunnel will come and negotiate properly when traffic is started from the desktop, but the traffic of main office is never sent to the bottom of the tunnel - it's as if the ASA does not think that traffic of 192.168.0.x to 192.168.3.x should pass through the VPN.

  Any ideas?

  Hello

  I think your problem is that there is no route for the actual remote network behind the VPN L2L through ISP B connection

  You could try adding add the following configuration

  card crypto PUBLIC_B_map 10 the value reverse-road

  This should automatically add a static route for all remote networks that are configured in the ACL Crypto, through the interface/link-ISP B.

  If this does not work, you can try to manually add a static route to the ISP B link/interface for all remote networks VPN L2L in question, and then try again.

  The route to the remote VPN peer through the ISP B does not to my knowledge.

  I would like to know if it works for you.

  It may be useful

  -Jouni

• Cropping multiple pictures on different pages at the same time

  Can I culture several images on different pages at the same time. In my french version of software Photos 1.5, this option is called "the photo to the frame adapter". I'm able to select this image of an option at a time, but could not find a way to make the entire book in one click.

  No there is no functionality like this in Photos

  You can ask Apple to add the - http://www.apple.com/feedback/photos.html

  LN

• I can't generate multiple signals with different phases.

  Hello community!

  I created a simple signal generator versatile (see Signal "Generator.vi"). When I try to put two of these generators in the same VI ("testbed non working.vi"), I'm not able to independently change the phase of the two signals. Only one of the two phase buttons actually modifies the two signals, while it has no effect.

  However if I copy and paste the exact schema even twice in the same VI, rather then import VI Builder, everything works fine ("Test Bench working.vi").

  It seems to me that the two generators are sharing anything other than the phase variable. I'm new to LabView and I can't understand what is happening and how to fix it. Can you please help me understand?

  Thank you very much

  Hello

  This is because multiple instances of the basic vi function generator will work regardless - they share information.

  To fix this one true constant wire to signal to reset the basic vi function generator enter your generator of signals vi.

  Best regards

  Florian

• Open multiple applications on different screens (Windows 8)?

  Is it possible in Windows 8 to open two applications to those, one on each of my two screens?

  If you have several displays connected to a device Windows 8, it will display the Start Page of Windows on a single screen and the classic desktop on the other screen. This is normal, because modern applications are designed for use in single screen.

  In short, no.. Windows apps Store can be on one screen, if the office is extended to multiple monitors. However, you can mirror your modern splash screen.