Take off the locking of the keyboard during a telephone conversation.

Similar Questions

• How do I know which programs to take off the windows Installer CleanUp list?

  Windows Installer Cleanup of

  * original title - how do I know which programs to take off the windows Installer CleanUp list? I don't want to uninstall or remove a program that I always use currently__ *.

  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301 (MS Office only - replaced by the 'Fix It' utility)
  (Note: the Windows CleanUp utility has been replaced by the "Fit It":http://support.microsoft.com/fixit/ )

  The Windows Installer Cleanup utility:
  It was created to correct software installations that failed during the installation process and leaving a bunch of files (including a file name that ends with an extension .msi (= MicroSoft Installer .msi). For example an installation failed MS Office (note I said "failed").
  See: http://office.microsoft.com/en-us/help/HA011185721033.aspx

  Also if when you installed MS Office you decided at the time you had no need of Power Point and chose not to install it. You find out later you need to make a Power Point presentation, insert the Office CD and try installing PowerPoint and it causes an error.

  The tool using Windows Installer Cleanup will remove damaged installation files (located in C:\Windows\Installer). You then install Office and Power Point, once more, as they are not more present in the list of programs in the Add/Remove Control Panel. But at least this time Office and Power Point will install without errors as the Windows Installer Cleanup utility did what it was designed to do.

  The unfortunate side effect of the cleanup tool is when you select and delete software that works correctly you then will no longer be able to install this software because it is no longer in the Add/Remove Programs list.

  Now as to why there is so many files in the C:\Windows\Installer:
  You will find lots of them. MSI files belong to software such as Java, Microsoft .NET Framework software AV, Norton Ghost, file downloaded during a Windows Update session and so on. It would seem that some software will clean up after itself and deletions, this is the file that were in the folder C:\Windows\Installer. Windows Update failure will create and leave the folders and files behind every time that you try to install the update and so you could end up with a large number of files taking up disk space.

  It could also be a lot of files (is most needed) orphans.
  If you still have the original Windows Installer Cleanup utility, and then by using the msizap (msizap g!) command removes all cached Windows Installer data files that have been orphaned.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• How do you take off the case of installation of memory for U205-S5002?

  I was wondering how do you take off the case for this particular model for a while. I have not met these at my work as a technician, I mainly deal with HPs and valleys, but Toshiba is far the best laptop so I bought it I'm not sure how becoming apart if I install new memory chips live.

  Help would be greatly appreciated. A link to a couple diagrams would be perfect, but the directions would be also greatly accepted.

  Thank you

  Hello Greg

  To remove the RAM module on the Satellite U200/U205 is not so problematic. First I would like to remember you that you should be very careful because if you have no experience, you can damage something. Most of the plastic parts on the laptops is very sensitive and can be easily damaged. Please be gently.

  Very nice explanation how to expand the memory, you can find in the document of the user s manual on page 156. If you do not have it please download it from http://eu.computers.toshiba-europe.com > support & downloads > support home > downloads.

  If you need further assistance please write again.

  Bye and good luck!

• HOW CAN I TURN OFF THE KEYBOARD SCREEN. IE automatically stop coming.

  HOW CAN I TURN OFF THE KEYBOARD SCREEN. That is to say stop automatically come

  Hello

  ·         What is the operating system installed on the computer?

  Answer with the information above for you help.

• Turn off the screen during the call

  I'm working on an application BB10 requiring to be able to turn off the screen in the same way as holding it close to your face during a call. What can I use to deactivate and reactivate the screen?

  I solved this by adding a container around the outermost container in the hide/show of the container and QML file inside in response to proximity sensors readings.

  I posted a question and answer on Stack Overflow to explain it: turn off the screen during the call

• Should I turn off the keyboard and bluetooth mouse off?

  Hello

  I'm new to Apple products and have recently purchased an iMac with keyboard and mouse compatible bluetooth.  The are a switch on each accessory to activate the bluetooth on or off.  Should I turn off after closing down to save the battery power or not this wear simply on the switches.  Not sure if stop actually stops transmitting wireless accessories, or if the latter uses the negligible power when the computer is turned off.

  Thank you

  JosfromSydney

  JosfromSydney wrote:

  Hello

  I'm new to Apple products and have recently purchased an iMac with keyboard and mouse compatible bluetooth.  The are a switch on each accessory to activate the bluetooth on or off.  Should I turn off after closing down to save the battery power or not this wear simply on the switches.  Not sure if stop actually stops transmitting wireless accessories, or if the latter uses the negligible power when the computer is turned off.

  Thank you

  JosfromSydney

  Yes switches turn off the wireless, and yes they use negligible power when the computer is turned off.

• Should I turn off the keyboard and mouse after use or leave?

  I find it annoying to switch the keyboard power continually because of the password on and off.   Wouldn't be much difference to the life of the battery to let both mouse and keyboard lights permanently?

  I have never turned off the mouse or the keyboard. The batteries have been used for about a month, with the mouse to 60% and the keyboard to 90%.

• Cannot turn off the keyboard

  After pressing the power button on my PalmZ22 and the disabled keyboard appears and I type to disable the keyboard this screen disappears.  Tapping to turn off the screen to put my password does not work. I tried to reset my Palm with Soft and Hard Reset function, and always with let me not disable the keyboard.

  ecwmoore2106, please do not double - post.

• take off the borough in OBIEE reports

  I have a report with 10 columns, when all values are zero, so I need to remove that line of crresponding report.
  
  I wrote a filter condition where (col1! = 0 or col2! = 0 or col3! = 0 or... col10! = 0)
  
  I have a value of 0.1 in one of the columns. He is shown as a zero in the report... Since it has 0.1 this line is not eliminated report which is good. BUT my report shows that the value 0 instead of 0.1
  
  How take off rounded without going into the properties of each column and substituting the default values?

  Column-> Data Format format->
  Locate the default alternative size data
  Treat the numbers as--> number
  Decimals Select 1 or 2

  You may be able to save the configuration by using the Admin user so that all users can see the same format.

  Published by: Srini VIEREN on March 25, 2013 14:53

• Turn off the screen during execution of operating system

  Hello
  Is there a way to disable the display of a Toshiba L300 19 f while the system works (plays music for example)...?

  Thank you.

  Of course you can do it.

  I do not know what power profile that you use, but if you use the balanced power plan type parameters and sets Turn off the option to display for 1 minute.
  I do the same when the laptop is running and when I want to listen to my favorite online radio station. I put it at 1 minute.

• Drive external DRIVE not detected (2 PCs), after turning off the PC during the error checking

  I ran properties/tools/error-check on a (regularly used to back up this PC XP) external HARD drive. After 2 days, error checking was still running and not even 1/3 way 4th Phase but I need PC. It was not possible to stop "Error Check" from the dialog box then I tried Task Manager/Applications, which said that nothing worked, so I turned off the PC.

  When I restarted the PC, external HARD disk was not in my computer. Control Panel of configuration/addition does not see it no more. However, when I plug / unplug the station. HDD USB cable, the computer makes a noise and is also recognized in "Device safely Shut Down" as a USB storage device mass (but no drive letter). I tried to start/run/Cmd/Diskpart/List Disk and it is not listed.

  NB. I checked the post. HARD drive on a Linux PC, which also does not detect not, then it is certainly the post. Drive HARD, not the XP PC.

  Can offer you any advice?

  Hello

  · What is the number and the model of the hard drive?

  As you mentioned that the issue isn't with the operating system but with the drive hard, for better support I suggest you to contact the manufacturer of the hard drive.

  You can also get in touch with any local technician who can help you with the same.

• Turn off the computer during the upgrade to windows...

  KB3097989 - guard trying (and failing) to install.

  Latest install ok that I didn't not turn off the computer.

  I can KB3097989 to install or lose it somehow?

  Go to uninstall a program

  Click with the right button on Microsoft Net framework which ever version view you and use uninstall or change.

  Use the Debug program.

• mouse without borders do not transition to the keyboard during the passage of virtualbox for machine B

  Hello

  I have the following Setup.
  Win7 computer has
  Accommodation Virtualbox Ubuntu 12.04LTS
  Win7 machine B
  Whenever I go to Virtualbox directly to Machine B, the mouse works without any problem, but the keyboard does not transition.
  If I tap the keyboard typing rest on the Virtualbox VM commands.
  The only way to transfer is as follows.
  VM VirtualBox, mouse slide for Machine A Win7 box, click on and then go to the B machine where you will now be able to type (keyboard finally transitions).
  Note that I have observed the same behavior with other virtual machines, such as Mint and CentOS. So I don't think it's a problem related to the virtual machine.
  Finally, I used synergy before and it doesn't have the same problem. There are a few advantages to mouse without borders that is why I would use it.
  Please advise,
  Thank you
  VVhelp

  Found a solution: simply disable "Auto Capture keyboard" in the global preferences of VirtualBox.

• take off the transparent layer

  When I used elements of Prime Minister there was an effect where I could have a transparent layer peel off the layer behind him.  you could see through it, while it delaminated.  I do not see this effect in PP.  How can I do this effect?

  Turn to page / Page Peel

  Try and apply an opacity on the layer that you want to assign as your Page round begins.  Use keyframes on it.

• Turning off the display during the rendering?

  Hi all-

  quick question for you, is there a way to disable the display of images in rendering? And if so, it helps the rendering process run faster?

  Thanks in advance

  Sincerely-Douglas

  Yes, and it will make it faster. You can press Caps Lock shift once again to see the rendering to check on progress and press a second time to turn it off. It is really very convenient.