Target configuration of AGENT on the server

Similar Questions

• Not able to install Management Agent on the server no - WHO, different platform

  Hello
  
  I run 12.2 of the WHO on a Linux platform and must make a 64-bit Windows Server a target managed by getting the installed Management Agent.
  
  The Agent software for the server to Win 64-bit platform has been downloaded using the console auto update. However, I can't add the target host because it maintains have reported that I have selected a platform for which software Management Agent is not available on the WHO and I want to use the update auto etc.
  
  So, after that I downloaded the agent software for Windows 64-bit at WHO, using the self updated fucntion, in the list of the software updates Agent, I see:

  Downloaded  |  Microsoft Windows x64 (64-bit)  |  12.1.0.2.0  | Oracle  |  Agent Software ...

  and when has highlighted in the past, activities list it shows shares"available"and then "Download", both with the status of successful operation.
  
  So now, I'm going to: Setup - Add Target - add targets - manually add hosts
  I add an entry, fill in the IP address and choice of platform (win 64-bit), but the platform name is added with * "Unavailable software Agent" * then recommend me again to download the software for this platform using auto update !
  
  Just in case, I made a new connection in the OEM but which did not help.
  
  Can anyone suggest me please an action plan to "fix" it?
  
  Thank you very much!
  Ed

  Hello

  After downloading the software agent, do you have one apply?

  If not, then pls do more...

  Setup > extensibility > auto update > click agents

  in "actions" drop-down menu, select apply.

  You can always check the software available in your OMS agent using emcli.
  Use this command to get the list of the avlble

  emcli get_supported_platforms

• Do not start the Oracle Agent on Windows Server SGD 10.2.0.5

  I just installed Oracle Grid Control (10.2.0.2.1) on a Windows 2 k 3 Server and updated to upgrade to 10.2.0.5 without problem, but the agent.
  
  The NETWORK is working properly, I can add new targets to it, but I can't start the agent on the server. What can I do to find out what's wrong and fix it? Event Viewer Windows shows no valuable idea...
  
  C:\ > emctl agent status
  Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
  Copyright (c) 1996, Oracle Corporation, 2009. All rights reserved.
  ---------------------------------------------------------------
  Agent, it is not running
  
  C:\ > emctl start agent
  Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
  Copyright (c) 1996, Oracle Corporation, 2009. All rights reserved.
  Starts the service of Oracleagent10gAgent...
  The Oracleagent10gAgent service could not be started.
  
  A service specific error: 2.
  
  More help is available by typing NET HELPMSG 3547.

  Check out what's in the newspapers in $ORACLE_HOME\sysman\log.
  This could be the time zone problem.
  Also read 788944.1 and 788944.1 on metalink.
  Unable to connect to the database console Enterprise manager

• How to start the agent on the database host computer that is being monitored

  Hi all
  I installed OEM 11.2.1.0. I stopped getting alerts after the 1 server node is restarted. I followed RAC database.
  When I checked the status of the host agent I get the following output
  [oracle@rs1pre91dvdba01 bin] $ pwd
  / u01/app/Oracle/agent11g/bin
  State of the agent emctl [oracle@rs1pre91dvdba01 bin] $
  ORACLE_UNQNAME environment variable not defined. Please install ORACLE_UNQNAME in unique name of database.
  [oracle@rs1pre91dvdba01 bin] $ export ORACLE_UNQNAME = MDM11
  State of the agent emctl [oracle@rs1pre91dvdba01 bin] $
  The MA Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/rs1pre91dvdba01_MDM11 not found.
  [oracle@rs1pre91dvdba01 bin] $
  
  And even on node 2
  [oracle@rs1pre91dvdba02 bin] $ pwd
  / u01/app/Oracle/agent11g/bin
  [oracle@rs1pre91dvdba02 bin] $ export ORACLE_UNQNAME = MDM12
  State of the agent emctl [oracle@rs1pre91dvdba02 bin] $
  The MA Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/rs1pre91dvdba02_MDM12 not found.
  
  Please can I know how to start the agent on the nodes and also auto how the boot process of the agent on the server restart
  
  Thank you.

  I assume that you have installed your agent in the directory

  / u01/app/Oracle/agent11g/bin

  If this is correct then run the following commands

  Export ORACLE_HOME = / u01/app/oracle/agent11g /.
  export LD_LIBRARY_PATH = / u01/app/oracle/agent11g/lib

  PATH = $ORACLE_HOME/bin:. : $PATH; export PATH

  As a matter of fact, you need to set the environment variables separate for the agent to execute commands
  which are related to the agent. These distinct environment must be set correctly to ensure that the
  commands can be found in the appropriate directories...

  Then, run the status command emctl agent...

• Trying to understand HT203325: cannot connect to the server with the account of the user of a network

  It is a kind of home network issues.  Basically what I want to do is set up a unified environment with the profiles of school boards.  I have a couple of iMacs, a couple of the MacBook and some iPods, iPads and iPhones.

  I would like to run the server on one of my iMac, but this note from Apple shows that I'm having problems.  I don't have a machine that I can run like a dedicated server, I need all machines to be accessible by all users of the Open Directory.

  More I read the note, less I seem to understand.  Forgive me, I'm not an IT professional.  I put in place quite a while Apple (10.4 & 10.5) servers and we had no problem with network users that connect on the real server.

  It was that home directories have been shared with AFP or NFS.  I thought that I saw that they are now shared with AFP or SMB.  Note trying to tell if the server is editing on the one hand, that no other client can mount and access a share until the server has removed it?  This seems to contradict the network share point.

  Is there anyway to overcome this problem?  I tried google, but I see a lot of messages that point to the note from Apple, but not really one that helps solve the problem.  Could I run the server on the two iMacs, put on an OD and share the home directories of the other?  So I think that it would be the base directory is never hosted on the same computer where the authentication takes place.

  Any clarification would be appreciated.

  Thank you

  Brett

  PS: My Mac is fairly new, so I can update all 10.11.2 & I didn't buy server, so I would get the most recent and for that, too.

  Try it.   But I wouldn't expect that you are trying to do will be reliable, and I would not recommend using a server as an interactive workstation - the two tasks are usually in opposite directions.

  If you want to store shared files, that activate the OS X client, or install and use a NAS box.   There is no server need, if networked storage is the goal.

  Running a server means implementation of DNS services locally and many other tasks.   It was possible to get out for the most part without doing that, but 10.5 started to get flaky without services local DNS and security and network authentication are now commonplace, and this does not at all well without local DNS.

  Servers should also be available at all times, and - as often happens - shared systems may be rather less stable that software is modified, the systems are closed down, or otherwise.

  NFS is available on OS X for several years, and some people have manually configured access remotely via NFS.   It is much more common to see the AFP and increasingly used CIFS/SMB, however.

  Of HT203325: users can be local, as is typical of most of the OS X client configurations, or they can be so-called network users - users with their connection directory located elsewhere and often with access and the same password on multiple systems.   If users are configured as users of the server network, then do not allow users to connect directly to the server.   Who - is the server that serves files and directories of itself to itself - is not reliable.  Not in this technical note, and not by what I saw.

• password by default when the server is inaccessible

  Hi, I recently configured AAA. When the server is running everything is fine, but when the server is inaccessible, I'm locked up. How can I put on a default user name and password when the server is inaccessible

  Thank you

  James

  There are several ways to configure AAA so that you are not locked if the server is not available. You can use a username that is configured locally, as you suggest here, or you can use the configured line passwords.

  To use a locally configured user your configuration might look like this:

  rick user password Cisco

  AAA authentication login default group Ganymede + local

  Or, to use the online passwords as a backup of your config might look like this:

  AAA authentication login default group Ganymede + line

  You also probably need a backup to access the privilege mode. This is done usually by using the configured locally enable secret. To do this configuration might look like this:

  the AAA authentication enable default group Ganymede + activate

  HTH

  Rick

• How to configure the remote agent to talk to the server of OLT

  Hi all

  I just install OAT 12.3.0.1 on Linux server and also install a separate OLT agent on Linux oul5x64

  Issues related to the:

  How can I configure this agent to communicate with the backend of OLT.

  Thanks in advance.

  Hello

  You must configure a system remotely from the console of OLT (menu Tools, I don't have the GUI in front of me).

  You must make sure that your agent is running. There is a script to test the State of the agent.

  You must also make sure that the two machines can talk to each other with the same name & IP. BTA is very sensitive to this. Most of the problems of communication between the server from the OLT and agents is due to resolution of bad reputation. Better to day/etc/hosts on both sides with IP & names.

  Please give a try and let us know

  JB

• Installing TB31.3.0 on a W8.1 workstation; I want to delete the messages on the user agent of TB, but prevent deletion on the server. Where is the switch? When to install

  Hello!

  I have already installed a TB user agent on my workstation 'primary': I can create, read, and DELETE messages ON the workstation and the server.
  I want now to install a user of TB on a "secondary" workstation agent, where I can create, read and DELETE messages on the workstation. But I don't want the secondary workstation to delete messages on the server. (In short: I want that the function "delete" ONLY allowed to my primary workstation).
  Is this possible? Where is the switch ON / OFF? (For example, this feature is available on the agent on my WindowsPhone).
  When I install it?

  Thanks for your support!
  Rgds
  Flamboyant

  Using Thunderbird on your second workstation - the only option would be to create a Pop email account
  so before you download anything, you must configure the account settings to "leave a copy on the server.

  Tools > account settings > account for Pop mail server settings.
  or
  Menu icon > Options > account settings > server settings

  • Letter: look for the e-news at startup
  • Letter: arrival of new messages every xx minutes
  • Select: automatically download new messages
  • Letter: Leave messages on the server '
  • Click OK

  E-mail POP accounts can only download the mail from the Inbox server.
  This will allow you to remove off the coast of the secondary workstation and leave it on the server.
  However, Pop cannot see or download other folders on the server: IMAP only can see other folders these are read remotely. But in IMAP because records are a same as server, removing in TB will remove also off server.

• How to install the agent to see on the windows image and upload to the server of connection?

  Hello, I'm running a trial to test this Horizon view. If my employers like it, they will implement. I installed and configured: composer, connection and security server.

  I created a Win 7 64-bit image and made money for her. I'm trying to figure out how to install an agent to view on this subject and to transfer him to the connection to the server. I read textbooks online, but maybe my eyes are tired, I've missed that.  How should I proceed to the next level so I can launch and test on a Wyse client?

  At a high level you are installing the agent, stop the machine, create a snapshot, and then create your pool based on this snapshot.

• Can not complete the configuration of the HA agent on the host. Another HA configuration error

  Dear team,

  
  I am facing a problem when setting up the AP on a single server. Scenario is the following:-

  
  Six months back I install the VMWare solution for our Organization. ESXi 4.1 is. At this time there were two servers in the cluster, and both have been configured with HA successfully.

  Now, I have a server added more in the Cluster, but when I'm trying to configure the AP on the same system, it gives the error "cannot complete the configuration for HA agent on the host computer.". Another HA configuration error. "(Screenshot attached) so many times I click with the right button on the server and select reconfigure VMware HA but failed.

  
  Could someone help me please. It is a live system and the knot very critical. If need help on an urgent basis.

  
  But in addition, we also bought a 1 year (TS) technical support for our prodcut. Could someone please guide me how can I get a ticket for it.

  Thank you and best regards,

  Gaurav Asthana

  
  

  Hi all

  Thank you for your kind support. My problem is solved and it is very simple. By turn off and turn on again the HA on the Cluster setting, the problem is solved. All servers are now configured HA.

  Thank you again...

  Gerard

• error "could not complete the configuration of the ha agent on the host computer.". bad configuration of the host network.

  Hola y buenos dias

  me esta dando este error cuando a UN con cluster 2 hots the digo el HA assets. There buscado por internet y the mayoria of las hacen referencia a lo mismo responses:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1039108

  The config of VMware high availability (HA) falla con el error: unable to complete the configuration of the HA agent on the host

  Symptoms

  Resignation: this article traduccion of one ' configuration VMware High Availability fails with the error: unable to complete the configuration of the HA agent on the host "(1019200). Los items han sido traducidos en Español multiple in el mejor esfuerzo. Sin embargo el contenido o can meet desactualizado specific location. Para revisar el contenido mas reciente, please consult el article in English.

  • The config of falla of VMware high availability (HA)
    
  • El client vSphere muestra una Cònsola de Servicio, sin embargo al run el comando esxcfg-vswif - l cuando is esta conectado has the console of Servicio de ESX is revelan consolas additional service
    
  • Following messages appears:
    
    
    • Cannot complete the configuration of the HA agent on the host. See the details of the task for more information.
      
    • Misconfiguration of the network host installation
      
      

  Resolution

  Este problema compares cuando no todos los servidores del cluster the same comparten consoled of servicio o the same config administration of red. Some servidores pueden tener consolas service using numbers different o pueden tener mas that consolas otros servidores.
  
  For example, este error can suceder tambien if the config of the puerta of enlace (gateway) of VMkernel none are the same para todos los servidores del cluster. Para Québec the config, haga click derecho in los servidores con este error y select reconfigure for HA.
  
  Revise las differences in the Red between los servidores config if usted goes a usar por Auto (off o Power Off) x responses, porque estas options provocan eventos registro 'VMware HA isolation' and consoled her of servicio o el registro fallas of administration of red.
  
  If using the funcion esta: VM left the lights on in answer of x, the opcion para ignorar estos messages is available VMware VirtualCenter 2.5 update 3.
  
  Para configurar VirtualCenter para ignorar estos messages, configure the option advanced das.bypassNetCompatCheck como 'true '.
  
  Nota: Cuando esta using the option das.bypassNetCompatCheck, El mechanism of pulse used during the solo en VirtualCenter 2.5 relaciona config direcciones IP simétricas subredes dentro a traves of los nodos. For example, en UN back nodos cluster, if a server has "Service Console" 10.10.1.x 255.255.255.0 vSwif0 tiene y vSwif1 "Service 2" 10.10.5.x Console y el servidor tiene vSwif0 "Service Console" 10.10.2.x 255.255.255.0 B y vSwif1 "Service 2" 10.10.5.x, el pulsation solo opera Console sober vSwif1.»» Desde vCenter Server 4.0, can be related through subredes, hacer TR 'Ping' between subredes are allowed. Sin embargo on VMware is replaced by Recomiendan tenerlas Las subredes dentro.

  1. Haga click derecho in el cluster, luego haga click change settings.
     
  2. Quite the selection to turn on VMware HA.
     
  3. Hope a todos los servidores en el quiten HA cluster.
     
  4. Haga click derecho in el cluster, elija y change the settings.
  
  
• Select turn on VMware HA, luego elija VMware HA desde el cuadro of the izquierda.


• Select Advanced options.
  
• Adicione opcion das.bypassNetCompatCheck con el valor 'true '.
  
• Haga click OK in the options advanced, luego haga click en OK again pantalla para aceptar los cambios in el cluster config.
  
• Hope a todos los servidores ESX in el reconfiguren HA cluster.
  

El tema are that he made lo go y sigo don't con el mismo error y no lo tengo claro what me escapa.

OS explico mi arquitectura

Cluster development: 2 hots ESXi HA con 4.1U1 en mi red (the same as el vCenter)

* Cluster production: 6 Hots ESX HA con 4.1U1 en mi red (the same as el vCenter)
* Cluster DMZ: 1 Hots ESXi 4.1U1 esta en UN behind del cortafuegos Swicth how, y todo el trafico between el host y el esta allowed vCenter
* NuevaDMZ cluster: 2 Hots ESXi 4.1U1 ante las nuevas needs y ante together por parte del responsible of poner seguridad como DMZ is replaced by vmware Recomiendan to vuelve a poner the same config as the DMZ real osea, estan en UN behind del cortafuegos Swicth how, y todo el trafico between los hosts y el esta allowed vCenter.
El switch DMZ y nueva DMZ of course are the same.
Editor rated UN of fotos explicativas.
01.intro good example of config del cluster ESXi Québec TR cluster is activa el HA
version of 02.VM02 y config of Red TO host led (Eliminado porque no puedo mas undergo 5 Fotos)
version of 03.vm03 y config of Red TO host led (Eliminado porque no puedo mas undergo 5 Fotos)
04.the HA configuration config del cluster as falla
version 05.VM04 y config del SO red host
version 06.vm05 y config del SO red host
07.immolation error pues eso el

• Extension jar files to put on the Server Configurator

  Is there a way to migrate the jar of extension of the Configurator in ordering to place the jar files in the server, rather than return to the ebs and download the jars with GUI and join models?

  What is happening in the background when the jar files are downloaded to the ebs model? whence the file stored and etc... ?

  It would be nice to be able to use PPM to migrate jar files. Help would be appreciated.

  Thank you

  It is possible to place the Extension Archives Configurator, or even your CX themselves, class files in the CLASSPATH of your application Java Server and then refer to them by their full qualified class name in your Configurator Extension rules.  There are many reasons that you do not want to do that, however.  Among them are:

  1. You should always make sure that identical versions of all Archives/classes are installed on all environments (development, Test, Production), on what your models to Configurator must be executed.
  2. Modify any class CX installed on the file system requires a rebound of web server so that the changes of code comes into force, which requires downtime for the Configurator, but for your entire system of E-Business Suite.
  3. Change a class CX installed on the file system immediately impact all templates using this Extension of configurator and therefore requires testing of each of them before the deployment of one.

  The framework of the Extension of the Configurator introduced in 11i10, in which Configurator Extension Archives are stored in the database, was designed to meet all these gaps in the system of a CX deployment files:

  1. CX archives are part of a Publication model, so it does not need to explicitly install jar files or class on any server target of Publication.  The CX Archives related to a model copied to the database target by pressing the program contributing to process the postback.
  2. Modify a class CX and republish a model that it uses do not require a rebound of web server.  At run time, the new automatically code gets loaded with the new definition of the model.  No downtime required.
  3. Modify a CX class only affect models that use it, and who are subsequently republished.  Models that do you not continue to use the CX code as it was during their last publication.

  I'm totally familiar with PPM, but I don't have to know anything to tell you that any deployment architecture consisting of Extension of Configurator classes on the file system take advantage of best practices facilitated by the standard Configurator Extension Framework.

  I hope this helps.

  Mathgamain

• How to change IP address of Agent connection on the server running?

  I have problem with the change of IP address of the agent as opensource Hyperic 4.0.2
  I changed the IP address of the agent system and after a reboot it show up on the dashboard for autodiscovery with note new IP address. I can open in Autodiscovery and click on 'OK '. So far so good. Can I browse the resources and find this platform and I'm taking the inventory. Now, it is not so good - I can see old IP address in 'properties Type and network '. I can add the new set IP address, mask of MAC manually and remove them manually the old IP address and it seems better. But the big problem is "Agent connection" field - it's still shows old IP agent. I run the query to change the IP address in the EAM_AGENT table for the corresponding id. It still shows the same old IP address in 'Agent connection' and it's drop-down list where I can't find the wiring is correct!
  Now, it's a way of communication - it seems that I get the measures defined previously, but I can't define new service to monitor. A quick test is to run live Exec 'df' command -, error message indicates that the server is trying to connect to the old IP address of the agent.
  I searched through all tables in database and it is not there. My guess is "cache". Is it possible to invalidate cache entries? Or hide it all?
  I restarted the Hyperic server, which is already bad in itself - why I have to restart the server if the broker IP address? This solved the problem with value of agent connection - now it shows the right IP address (it looked really as if it were in the cache), but it did not help too much. Now when I do ' live Exec - df "I get"unauthorized"error message. I have not deleted the directory of 'data' still on the side of the agent, but it seems a little too much work when the stockbroker IP address:
  -Restart agent
  -recognize the IP address change in the dashboard on HQ Server
  -to run the query to edit the EAM_AGENT table
  -(via user interface or through SQL query) remove old IP address manually and add a new IP address in the network platform properties
  -restart the server
  -delete data on the agent, and then restart the agent.
  
  Is there a better way to deal with it? I'm mainly looking for a workaround to restart the HQ server to change 'Agent connection. And blowing all directory data is not a good approach either - I have spent some time to add and configure the log files and services to monitor. If I understand correctly, it must be configured again.

  Hello

  normally execution of installation interactive on the Agent (HQ - agent.sh of installation) and recognizing changes in Autodiscover should suffice.

  Mirko

• Add the server as a target OEM grid control to monitor

  Hi Experts,
  
  I installed the grid control OEM 11.1.0.1.0 on server 'A', which has a database version Oracle 11.2.0.1.
  The operating system on the server 'A' is 5.5 OEL. The grid control installed on this server works fine and I have deployed agents on remote hosts that I am able to monitor successfully using this grid control.
  
  Now, I want to add the server ('A') on which the grid control is installed to be monitored by the grid control. Could someone let me know how to do this? I felt that it's the same way deploy us agents to remote hosts, but here, the agent is already installed at time of installation of control Grid.

  http://arpitagrawaloracle.blogspot.com/2012/05/manually-add-host-target-to-grid.html

• Errors in the HA agent on the Host Configuration

  Hello!

  I have a problem with vmware HA.

  I have 2 (ESX 4.0.0) cluster hosts and a Vcenter server 4.0

  I game enable HA in the cluster, but my guests cannot configure agent HA.

  It gives this error: unable to complete the configuration of the HA agent on the host. See the details of the task for more information. Another HA configuration error.

  In the details of the task for this task: cmd addnode failed for the secondary node: internal error of the MAO - cold agent will not start. : unknown error HA

  How can I solve this problem?

  Thank you!

  The most common problem is a bad DNS resolution.

  Don't forget that your hosts are registered with a domain name FULL in vCenter, and then test each ESX and vCenter (for the ENTIRE domain name) DNS resolution.

  Also make sure that each host and vCenter have the FQDN defined as the host name.

  André