Target of call for the PIN message (part of context menu)

Similar Questions

• Problem with SendListener - cannot be used with the PIN messages?

  Hi all

  What I'm trying to do, it's a SendListener attached to the PIN message session. So far I managed to join al SendListeners of e-mail accounts set up on my BlackBerry using the advice given here. Given that this solution filter the ServiceConfigurations downwards so that those who have an e-mail address (which would pass to the ServiceConfigurations PIN to e-mail) I tried this:

  ServiceBook sb = ServiceBook.getSB();
  
  ServiceRecord[] records = sb.getRecords();
  
  for (int i = 0; i < records.length; i++) {
  
    ServiceConfiguration sc = new ServiceConfiguration(records[i]);
  
    Session.getInstance(sc).getStore().addSendListener(this);
  
  }
  

  However, PIN messages not always call SendMessage() call!

  Could enlighten me is it someone please if it is possible to do what I want to do and, if so, how?

  Additional information:

  I work with a BlackBerry 8800 on Vodaphone UK, running OS v4.2.1.101 (Platform 2.3.0.80). It is, to the best of my knowledge, the latest version of the OS that Vodaphone have approved. Due to the version of the OS, I use the 4.2.1 API.

  Thank you in advance,

  cosmicflame.

  I can not comment on possible new features, but I can say that there is no way to capture PIN messages before being sent.

• I sent 2 SMS to the iPhone even from the same location 1 hour out. Why I was charged for the second message, but not the first?

  I sent 2 SMS on the phone even in the same place 1 hour apart. I was charged for the second message, but not the first. Why charge me? I was under the impression that the messages sent between iPhones are free?

  I was under the impression that the messages sent between iPhones are free?

  It's a little more complicated than that.

  If the message is sent as an iMessage (blue) uses the data that could be part of your cellular data allowance or WiFi depending on what you are connected to. If it is sent as SMS (green) it takes however your carrier charges you for SMS.

  For a message to be sent in an iMessage, both parties need to have a device capable of iMessage (e.g., iPhone, iPad, Mac), iMessages allowed to have (settings > Messages > iMessage > on) and be connected to the data (Wifi or cellular).

• Is BlackBerry a limit of the body of the PIN message?

  Hello

  Please suggest...

  Is BlackBerry a limit of the body of the pin message? for example message has the character of up to 160 limit...

  It is limited by the size... 32K or 64K function OS if I remember correctly.

• After the response failed to ema joining photos, l had opening of 'problem'... "" try again "screen but now cannot open new screen msg at all for the new message or a reply. Access always able recd emails. Vista 32

  After response failure attaching pictures to the email received, l had opening of 'problem'... "" try again "screen but now cannot open new screen msg at all for the new message or a reply.
  Hope I'm doing this right - tried restar, apparently seeking the answers and by publishing this request elsewhere. Appreciatte guidance!

  Hi Mike,.

  You are welcome. If you have any other questions, you can always report to Microsoft Answers.

• I'm looking for the Pin Code of the card UMTS Vodafone

  Hello

  I bought Lenovo T400s and was surprised to find a Vodafone SIM inside!

  Now I want to use a seaching for the PIN Code, dose sombody knows where I can find?

  I only find a card with a no. P. and an ICCID Code, it not there no manual or any other information.

  Thanks for the help!

  larsspo, welcome to the forum,

  the PIN code for the previously inserted in Germany SIM cards is 0000.

  Hope this helps

• How to check the possibility to send the PIN message?

  Hello

  Is it possible to verify that a device is able to send a PIN message without sending the message to the PIN and check its status? I cover all possible cases, such as devices with WIFI and without, company activated devices and is not active and etc., devices with antenna radio off the coast.

  Best regards.

  I think you need to BIS to send PIN messages.

  If this is the case, you can use CoverageInfo to check for this.

• Font used for the Inbox Message unfortunately also used in other programs

  OK, so when you do a right click on the desktop, click Personalize, then window color and then finally advanced appearance settings, you can customize some parts in windows.

  

  So, I chose a font for the message, as shown above.  However, I noticed that the police appear in other places that I don't want it.  The olive colored arrows show where.

  

  

  

  How can I make the police appear to ONLY message boxes and not in other programs?   Thanks in advance for your help.

  Hello

  Thank you for using Microsoft Community.

  It is not possible to maintain a different font for other programs.

  Once we change the fonts in Windows color and appearance, it will be for all programs.

  It is not possible to apply a different font to other programs.
   
  This behavior is by design.

  Thank you

• Error-50103 during the VI call for the second time

  I have a main VI who, after the initial installation, called a VI that reads and writes several times to a data acquisition (USB 6356). This VI subroutine is called several times for each of the stages of the program. On the first pass through, there is no problem. During subsequent calls to the sub VI, however, it throws error-50103. I've identified the task that resolves this error. I made sure to do a self-cleaning on the task, create the task outside of loops and stop and clear the task after all the iterations are performed. To check if it is only the following calls may cause the error, I created a simple VI who just ran the sub VI twice now, and there are no errors.

  Any ideas on what is causing my problem or why it does occur during subsequent calls to my VI more complex?

  A picture of the frame and the task which gives me the number is attached.

  Thank you!

  I finally found the problem, although it was not the task that LabVIEW had identified. The problem task was a separate sub - VI who was called from the main VI and the Subvi that threw the error. I got this task stopped and cleared and it's not like he has over the matter.

  Thanks to all who have contributed.

• BlackBerry 10 What are the PIN Messages?

  Greetings,

  Are the Messages of pine that a lite version of BBM?

  Thank you

  Shane.

  Info: http://cellphones.about.com/od/BlackBery-How-To/a/blackberry-pin-messaging.htm

• BlackBerry smartphones can not open the pin message

  I have a Blackberry Curve 8310 on AT & T and I can't open a pin message that was sent to me by a friend, I see the notification on the homescreen smiley face, but I can't understand how to display the message.  All help to determine what would be appreciated!

  Welcme to Frums!

  When you go to your home screen, press menu and all show. Make sure that your message of what icon is there.  He comes across as an email.

• BlackBerry Smartphones Apple Mail synchronization during typing, several updates on BB for the same message.

  First of all, thank you for the research and help. Second, it's probably my fault because I'm a tweaker often at my expense. So, with the creation of the road, here is what happens:

  I have a MacBook Pro and my email is IMAP to my GMail account. When I reply to a message on the Apple, using Apple Mail, AS I TYPE, the BB Gets a NEW email with the last episode of the email! Here is an example that just happened:

  Open the email, start you answer... "Paul, I wanted to explain.

  BB announces new mail with this sentence

  I continue typing... "why I love pasta.

  BB announces new email with 'Paul, I wanted to explain why I love pasta.

  Etc, etc, etc.

  So my work around him to go to gmail.com and write the email in that program instead of using Apple Mail on laptop.

  My BB is Tour 9630 with 4.7.1, and the Gmail app is 2.0.7 if it's important.

  Apple's OS x 10.6.2 and Apple Mail's 4.2

  Oh, Bluetooth is not enabled on a device.

  Let me know if you need any additional information. Thanks again for looking!

  Peace.

  Hi John,.

  Try this:

  In Mail, go to Preferences > accounts > behaviors of the ball

  Uncheck the box, "Store messages on the server" on the air currents, then back up.

  Let me know if this does not work.

  Peace,

  M.

• Disconnection of call for the endpoint MXP

  Hello world

  We have 1 special issue of one of our series mxp endpoint, where the call disconnects in between it the call, we call for our local endpoint in India on another mxp parameter to the United Kingdom on a dedicated IP link.

  The two endpoints are registetered to a common gatekepper.

  IM attaching the Syslog and Syslog 4 of our local endpoint 3 mxp mxp for your reference, please check the logs & suggest what could be the reason of disconnection of the call here.

  Thanks in advance

  Nikhil

  Hi Nikhil,

  Newspapers showing your EP get no response from the return of unity to end a call is disconnected.

  This problem is the network problem, check firewall, router configuration.

  H.245 Peer H323CC-1 entity does not meet the demands of round-trip time

  H.245 Peer H323CC-1 entity is presumed down. Disconnectiong.

  Kind regards

  Dharmmesh

• Need to have a different label for af:inputText as for the error message

  Hello

  Jdev version 11.1.1.7

  In a form, I have a label for the af:inputText as a statement and not the name of the attribute.

  But when the error message is highlighted in field 2, by clicking on 'All', all error messages come in a pop-up window where I NEED TO DISPLAY the ATTRIBUTE AGAINST THE EACH ERROR MSG instead of THE REAL GIVEN to THE AF:INPUTTEXT LABEL. Please suggest an idea.

  Kind regards

  Ramey

  Try to follow these steps:

  1 - in the inputText label sets the label that you want to display in popup error.

  2-set inputText simple property to true.

  3 surround inputText by af:panelLabelAndMessage and set the label property of the label that you want it to be viewable in the page.

• Installation for the error message for the Fund

  Hello
  Can someone tell what is the condition prerequisite/configuration to make the error message to display when the created purchase order does not have sufficient funds to cover the PO commitment

  Hello
  We believe that you have found this error checking of funds coz... An audit of the Fund determines if there are funds available for the requisition according to the budget there is place and if the cost is deductible. If funds are not available for the requisition, the applicant will receive an immediate notification that the funds are not available, and the request cannot be processed.

  Could you please check the profiles, 1) POR: allow funds to check, it is defined as "Checkfunds"?
  (2) PO: Substitute funds reservation

  S.P DASH