Disconnection of call for the endpoint MXP

Similar Questions

• Error-50103 during the VI call for the second time

  I have a main VI who, after the initial installation, called a VI that reads and writes several times to a data acquisition (USB 6356). This VI subroutine is called several times for each of the stages of the program. On the first pass through, there is no problem. During subsequent calls to the sub VI, however, it throws error-50103. I've identified the task that resolves this error. I made sure to do a self-cleaning on the task, create the task outside of loops and stop and clear the task after all the iterations are performed. To check if it is only the following calls may cause the error, I created a simple VI who just ran the sub VI twice now, and there are no errors.

  Any ideas on what is causing my problem or why it does occur during subsequent calls to my VI more complex?

  A picture of the frame and the task which gives me the number is attached.

  Thank you!

  I finally found the problem, although it was not the task that LabVIEW had identified. The problem task was a separate sub - VI who was called from the main VI and the Subvi that threw the error. I got this task stopped and cleared and it's not like he has over the matter.

  Thanks to all who have contributed.

• SSL certificate has expired for the endpoints BlackBerry push last Thursday!

  There is a generic cert used for endpoints BlackBerry push Eval expired last Thursday.  My embed code for the push service is the appropriate certificate validation and can no longer send.  I checked several end points of cpNNNN.pushapi.eval.blackberry.com and they all share the same expired SSL server cert (no wonder they are shared, surprisingly it is expired).

  To test:

  OpenSSL s_client-connect cp4714.pushapi.eval.blackberry.com:443

  Expansion: NO
  SSL-Session:
  Protocol: TLSv1.2
  Encryption: RC4 - SHA
  Session ID:
  Session-ID-ctx:
  Master-Key: E6D069A6416C5672A99B5D7FA4482190D03E9E14985FE2EB33AF51C580151200490CB06874412C62DAA945A35EA2BE22
  Key - Arg: no
  Krb5 main: no
  PSK identity: None
  PSK identity hint: None
  Start time: 1402341727
  Timeout: 300 (s)
  Check the return code: 10 (certificate expired)

  Cert server returned:

  Certificate:
  Data :
  Version: 3 (0x2)
  Serial number:
  5b: 49:CB:40:09:A7:D3:FB:72:F2:EE:4 b: 97:39:28:47
  Signature algorithm: sha1WithRSAEncryption
  Issuer: C = US, O is Thawte, Inc., CN is Thawte SSL CA
  Validity
  Not before: Jun 5 00:00:00 GMT 2013
  Not after: June 5, 23:59:59 GMT 2014
  Subject: C = CA, ST = Ontario, L = Waterloo, O = Research In Motion Limited, OU = IT, CN is *. pushapi.eval.blackberry.com

  ETA on when a new server certificate will be installed on endpoints pushapi.eval.blackberry.com?

  Seems now fixed.  New certificates of June 11 00:00:00 GMT through 11 Jun 23:59:59 GMT 2014 2015 are in place.

• a dll Win32 winspool call for the issue of the printer status

  Hello

  I apologize because I do not understand Win32.

  I for 2014 LabVIEW full development system and want to access the Win32 API.

  I am trying to write a function to determine if a printer is out of ink or offline for some reason any.

  I see that the MSDN Winspool library has the features I need.

  According to the MSDN Web site, the dll is Winspool.drv.

  https://msdn.Microsoft.com/en-us/library/Windows/desktop/dd162751 (v = vs. 85) .aspx

  I tried to do a call library function in LabVIEW, but it is the search for DLL and does not recognize the Winspool.drv

  It lie in the methods in LabVIEW to access the Winspool, or nobody knows what the correct dll (and location) I call is?

  Ultimately, what I want to do is open printer-> get jobs-> status of--> close printer.

  Seems simple enough.

  Thanks in advance for any advice.

  You use a 32-bit version or 64-bit LabVIEW? If you use the 32-bit version, you should not try to load the 64-bit version of the DLL. Surprisingly, the System32 directory is for 64-bit dll, and the SysWOW64 folder is for 32-bit dll. If you have installed the 32-bit version of LabVIEW, try SysWOW64 winspool.drv.

• How do you keep an incoming call for the slide to unlock?

  I love this phone and now my only problem (just me probably..) is an incoming call has this slide that you have to move, and I was wondering if there is a way to get rid of her... I asked before the lock on the front screen and got the unlock app that works very well if anyone knows if there is one for an incoming call? It's a pain... Thank you!

  Andrea

  I'm sorry I misled you.  Search with the keyword "thouvenel" market and you should find it.  (He spells his name with two d's)

• REST api call for the properties of the object in the html bridge provides resource not found (404) error.

  Hello

  I added a bridge Html summary view to our existing plugin (which is in Flex). The html page is displayed in the Summary tab with static data like images and titles. But the .gestJSON of the REST api call fails with the error ' could not load resources: the server responded with a 404 (Not Found) status.

  I followed the bridge Html sample chassisB (chassis - summary.js and html) to create the new page.

  Web.XML of the user interface of the plugin is configured to map/rest / *. bean dataAccessController is defined in the bundle context.

  Java package has the DataAccessController same class as the DataAccessController chassisB class

  This is the URL that I see in the javascript debugger and call API is a failure for this url.  There is no error in the virgo.log.

  https:// /vsphere-client/webui_ui_ns/rest/data/properties/323de5b9-4D2E-4dd7-ae32-98277dd44e90%252Fmf8k-h38?properties=name,model,version < vcenter ip >

  webui_ui_ns-client/vSphere is the value of Web-ContextPath in the plugin MANIFESTO. MF

  I spent a lot of time to understand the issue, but no luck. What I'm doing wrong here? Any help is appreciated.

  version of vCenter server appliance 6.0.0

  SDK - vSphere SDK Web 5.5.0

  1.7.0_79 64-bit JDK

  Thank you

  Deepa

  It was a configuration problem. I missed the tag in the bundle context of spring.

  After you add the 2 lines, it worked.

  Thanks for your time.

• For help. DLL file / library call for the USB camera Image data file

  Hello

  I'm new to the use of the library and imaging data files. Attached is a picture of the "call library leader." I don't know how to set up the entry of 'beef' / frame buffer.

  More information is explained in the attached PDF file.

  Basically, I just need to recover data from image and convert it to a real image. I sought help of LabVIEW and other sites files, but I can't find a clear solution. Any help would be appreciated.

  FYI - I can communicate with the camera using other functions of library file. Opens the camera, I can set/view KING and other data. I can't quite understand the frame buffer.

  -griplegraple

  
  

• Target of call for the PIN message (part of context menu)

  Hey. Here's a descriptor extracted bar that works with the context menu of email for sharing. How could it be changed to alow to work with PIN messages? So I want the user to bring up the context menu, select my app (a share point) and then I get the PIN and the PIN message subject. And it works with emails as before. Appreciate the help,

  See you soon

  Justin D.

      
          Alert for Reply
          
              icon.png
          
          card.previewer
          NotifyEmailReply
          
              bb.action.SHARE
              message/rfc822
              
          
      
  

  You will not be able to do it with the PIN messages as you can with e-mail.  Reception of invocation of sharing with the PIN messages is not supported.

• API calls for the current status of running processes and things

  Hi all

  I wonder if anyone no matter what API calls to get the current process list and the list of all programs installed on the BB device

  If there is not these API calls, is there another approach to get these lists?

  Thank you

  Dan

  http://www.BlackBerry.com/developers/docs/5.0.0api/NET/rim/device/API/system/ApplicationManager.html

  http://www.BlackBerry.com/developers/docs/5.0.0api/NET/rim/device/API/system/CodeModuleManager.html

• Calls for the CD with PDL_COMMON on the installation of the software for HP Officejet 4315

  I have a HP Pavilion 1540n running Windows XP SP3.  I try to install the software for a HP Officejet 4315 downloaded from HP website.  The installation was interrupted and it asks me for a CD entitled PDL_COMMON.  I don't have the CD and the software downloaded does not have such a folder or file.  Now what?

  Thank you, Bill

  Bill, I would recommend a complete uninstall of the product, programs and features, as well as the removal of all copies of the printer in the Device Manager or the printers and fax machines.

  Click START, and then click RUN. Type "%temp%" and press ENTER. This will open your temporary folder, erase all files here that it is possible - some may not be deleted, but most should be able to be.

  Then follow the link here:

  http://goo.GL/ef1Ay

  And install the printing software.

  Let me know how things are going!

• WebEx call for the stand-alone device SX20

  My client got an autonomous telepresence SX20 system. It communicates with other systems of telepresence on the internet using the public IP address.

  They ask to have WebEx users dial in their system. Is this possible with the current configuration? If so, please explain how?

  Thanks in advance!

  WebEx does not support the composition of an endpoint of telepresence.  If they had WebEx Meeting Center with cloud of CMR, they could host a WebEx session they can dial in the SX20 and anyone can attend using their own point endpoint or via WebEx.

  Meeting rooms (CMR) overview of collaboration cloud

• Reconnect a disconnected host vCenter for the VC plugin

  Meet us enough frequently a problem with a vCenter is no longer communicate with the plugin from VC.  I want to be able to do is to force the plugin to try a reconnection to the vCenter when it is in such a State.  Sometimes the VC plugin will appear under the name "unusable" in inventory and at other times, it looks good, but if you try to cross the inventory, you'll find yourself with this defect.  The only way that I was able to get the happy connection is again to restart the vCO Server service.  What I would like to be able to do is to check for a null or undefined or null return value when I expect to be valid, as appropriate to tell her to reconnect, if it still does not then kill the process.  I can easily do the test, but I don't know how to force a refresh of the connection.  VcPlugin.refreshObjects () would result in a reconnect happening?

  Have you looked into the technical preview plugin in the docs tab? A ball in its description element looks like it automatically solves what you describe. Preview version of VMware vCenter Orchestrator plug-in for VMware vSphere 5.5.1 technical

• createRowFromResultSet not called for the first row

  Hi all

  Jdev Version: 11.1.1.7.0

  I have a XML stored in DB as a CLOB. I get this as a CLOB XML file (via clobdomain) in my VO and will fill some other transient attributes. I tried to do this by substituting (according to the ticket) method 'createRowFromResultSet'. I observe a strange behavior that this method does not get invoked at the first line only.

  Earlier, I see someone else suffer from a similar problem - discussion thread. Is this a bug that appears when you use clob and the override of this method?

  Thanks in advance,

  Srini

  Noted bug with Jdev team for this that I was able to reproduce the problem. Once I have remove the CLOB to the VO, he begins to work!.

• Enable Editting of EPMA planing has been calling for the Web Interface of planning

  Hello
  
  I have a created using EPMA planning application. Now installed EPMA crashed and there add metadata in our application of emergency planning. In my view, there is a folder that can be added in the properties table to achieve this.
  Can someone help me on this.
  11.1.1.3 version.
  
  Thanks in advance.

  If you go to HSPSYS_PROPERTIES in the database relational system planning and updating EDIT_DIM_ENABLED from false to true for your application, the app ID will return to the HSPSYS_APPLICATION table.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Function call for the ActionScript variable name

  I am tempted to call a function dynamically by using a string variable.  I know that to do this normally, I would use code like this:

  var functionName:String = '' + currentItem.id;

  var myData:Array = this [functionName] (parameter1, parameter 2, parameter3);

  However, my function is actually in another directory of flex/package called UploadApps.customUploadFunctions.  I tried this sort of thing:

  var functionName:String = '' + currentItem.id;

  var myData:Array = UploadApps.customUploadFunctions.this [functionName] (parameter1, parameter 2, parameter3);

  but it does not work.  Any ideas on how to call a function with a variable name in another package?

  John

  My suggestion is to stop using the methods at the level of the package. Just do static methods in a utility class as we do in the framework in the mx.utils package. Then you can easily call them UtilityClassName [functionName] (param1, param2, param3). Given that the programming in AS3 is 99.9% on classes, I don't know why AS3 allows even the methods package level.

  Gordon Smith

  Adobe Flex SDK team