tavla indir

Similar Questions

• Pavilion 15: Where can I find my Windows license

  Hello, I have a really bad problem. It's not all about learn Windows license. OK, now read it carefully.

  (ENG)

  First, I searched many websites SteamOS and I learned how dual-boot with Windows. I did all the steps on my EXTERNAL hard drive. Installer has done everything for me, but I chose only an external hard drive, after the installation, I learned he deleted all "sda" drive (original disc). Not only "sdb" (external hard drive). I don't know why. I can learn my Windows license again?

  (TR)

  First, SteamOS hakkında inanılmaz bir araştırma yaptım, Hello Windows aynı anda calıştırabileceğimi oğrendim ve adımları birer birer harici harddiskime yaptım island. Buraya kadar normal herşey. "Ancak kurulum ve bilgisayarı yeniden başlattıktan sonra oğrendimki SteamOS bittikten' ciğim ' bilgisayardaki ana diskide sıfırlamış, program of the onca, oyun, Belgian herşey went. Tamam, IP not indir yap ay from az 1 en trading. Hadi o iyi. Anahtarı of TL'lik Windows 10 AMA 500? UN oğrenebilir miyiz? Bir doors genelde BIOS'a gomulu olur dedi. Eğer oyle birşey varsa dolayısıyla olur. BU arada garantinin bitmesine 3 ay var.

  TurkRevolution

  Hello;
  
  Let me welcome you on the HP forums!
  
  I do facilities Linux dual-boot for many years, and one important thing I learned very early, it's ALWAYS having ALL players disconnected when you make a Linux installation.

  Why?

  Because the default installation values "sda" and make changes to that drive - unless you go way out of your way to avoid what he.

  You have requested your license Windows return.  But that is what you really need:

  (1) to recover the product key for your initial installation of the operating system

  (2) reinstall your initial installation of the operating system

  In addition, we need to know the number of detailed PC product: find your model of HP product number. HP® customer support

  And finally, in regards to your product key recovery, we need to know what version of Windows you are running.

  We can proceed once you provide the information.
  
  Thank you

• No defragmentation tool is currently installed

  Have Windows7 x 64 here and in Explorer when I did a right click of the mouse on any drive hard partition select Tools and defragment now told me 'no defragmentation tool is currently installed. I can do on a post saying search dfrg.inf and when found a right mouse click on and select Install. I did it. However, when I now go through the process even under the Tools tab and click on defragment now I says:

  "The Disk Defragmenter is not installed on your computer. To install it, double-click the icon Add / Remove programs in Control Panel, click the Install/Uninstall tab, and then follow the instructions on the screen. »
  If I go accessories | System tools are it has two Defragmemters of disc one that works %windir%\system32\dfrgui.exe while the other is looking for C:\Windows\system32\dfrg.msc, but fails to find.

  I can have compounded the problem by telling Windows to install the older INF file that was apparently in Windows XP that is on another partition on this computer. I managed to solve the problem by changing the key

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\DefragPath
  so that her default is c: % indir%\system32\dfrgui.exe
  Now, when I click the Defragment now under Tools Windows 7 Disk Defragmenter opens.
  This problem may have been caused by installing Ashampoo Uninstaller that I didn't also installed its own defragmentation utility.

• can you please help me understand this regexp

  Dear experts,

  I got the code of the Web site only.

  But I am not able to understand.

  I know its very basic question and I need to us in the form of documentation.

  Please help understand this code

  
  
  with data_cell as (
                     select  q'~[{"id":"1666","issueId":"ezsats:10000:1418145284747","sapId":"1101854","name":"INDIRA DEVU MD PC","createdBy":"Someone, Adam","dateAdded":"2014/12/09"},  {"id":"1667","issueId":"ezsats:10000:1418145284747","sapId":"1125031","name":"IL INDIRA DEVU MD PC","createdBy":"Someone, Adam","dateAdded":"2014/12/09"}]~' cell
                       from  dual
                    )
  select  rtrim(regexp_replace(cell,'.*?"name":"([^"]*).*?}.','\1;'),';')
    from  data_cell
  /
  
  
  () The subexpression (a.k.a. a submatch or group) 
   and subexpressions may be nested to any depth.
   Parentheses (subexpresions) also capture the matched element into a variable that may be used as 
   a backreference. 
    (aka grouping or submatching) and their use as backreferences.
  The following is a set of iteration metacharacters (a.k.a. quantifiers) that can control the number of times the preceding character is found in our searches. 
  The iteration meta characters can also be used in conjunction with parenthesis meta characters.
  . The . (period) means any character(s) in this position, for example, ton. will find tons, tone and tonneau but not wanton because it has no following character.
  ? The ? (question mark) matches when the preceding character occurs 0 or 1 times only, for example, colou?r will find both color (u is found 0 times) and colour (u is found 1 time).
  * The * (asterisk or star) matches when the preceding character occurs 0 or more times, for example, tre* will find tree (e is found 2 times) and tread (e is found 1 time) and trough (e is found 0 times).
  + The + (plus) matches when the preceding character occurs 1 or more times, for example, tre+ will find tree (e is found 2 times) and tread (e is found 1 time) but NOT trough (0 times).
  

  Hello

  Like John said, if you want to talk about the suggestion of someone, then it makes more sense to respond to this proposal in the same thread.

  Try to split the term complicated part smaller, easier to understand, like this:

  Select rtrim (regexp_replace (cell

  , '.*?'        || -any text (as low as possibble)

  "« nom » : »" ||

  '('          || -- \1 is ...

  '[^"]*'  || -0 or more characters, but without quotes

  ')'          || -end \1

  '.*?'        || -any text (as low as possibble)

  '}.'            -a hug right, followed by any 1 character

  , '\1;'

  )

  , ';'

  )

  of data_cell

  ;

  This makes it more clear what you first do replaces

  x 1 "name": "y' 'x 2}.   with a little

  There

  where x 1 and x 2 can be anything, except that you do not want 'something' to include another instance of the model that you are replacing.  That's why you should use

  .*?  instead of simply

  .*

  The '?' after ' *' makes No greedy, i.e. when there is a game of choice, as little as possible.  (The default value for the regular expressions must be greedy, or match as much as possible.)

  Note that this solution assumes there is exactly 1 "name" element in each set of braces.  For example, if you have a string like:

  "[{'name': 'A', 'name': 'B', 'name': 'C', 'name': 'D'}, {'foo': 'bar'}]' he returned.

  ' ONE; [{'foo': 'bar'}] "The solution more complicated that I posted in response on the original thread #3 returns

  ' ONE; B; D"

  Note also that none of them not what you asked.

• How to extract repeated the pair key / value of string in a column values?

  Dear Experts,

  I have this value stored in a cell as a string value for all rows

  [
  {"id":"1666","issueId":"ezsats:10000:1418145284747","sapId":"1101854","name":"INDIRA DEVU MD PC","createdBy":"Someone, Adam","dateAdded":"2014/12/09"},
  {"id":"1667","issueId":"ezsats:10000:1418145284747","sapId":"1125031","name":"IL INDIRA DEVU MD PC","createdBy":"Someone, Adam","dateAdded":"2014/12/09"}
  ]
  

  I am updating a stringvalue who's name to a different format.

  Old Format

  [{'id': "1666", "issueId": "ezsats:10000:1418145284747", "SAPID": '1101854', 'name': 'INDIRA DHORDAIN MD PC,' "createdBy": 'Someone, Adam', "dateAdded": "2014/12/09"}, {'id': '1667', "issueId": "ezsats:10000:1418145284747", "SAPID": '1125031', 'name': 'IL INDIRA DHORDAIN MD PC,' "createdBy": 'Someone, Adam', "dateAdded": "2014/12/09"}]

  New Format

  INDIRA DHORDAIN MD PC. INDIRA DHORDAIN MD PC

  
  

  
  

  How can you do with sql and plsql function?

  
  

  Can you please help me.

  
  

  Thank you and best regards,

  
  

  Hello

  Maybe you want something like this:

  SELECT REGEXP_REPLACE (REGEXP_REPLACE (str

  , '(^|"). *?" Name":"([^"]*)'"

  , '\2;'

  )

  , ';". *'

  ) AS the target

  FROM table_x

  ;

• Exception: "could not validate SAML token.

  We have a configuration of rating system that we use to generate a PDF of Psalm we you connect through the EJB client and usually have had no problems. Until today. At some point today we started seeing some exceptions are thrown on the client:

  Caused by: com.adobe.idp.um.api.UMException | [com.adobe.idp.um.api.impl.AuthenticationManagerImpl] errorCode:16421 errorCodeHEX:0 x 4025 message: SAML - Assertion impossible to validate the token has expired and therefore not valid for user [administrator@DefaultDom]. Its valid until time [kill Feb 04 10:58:45 MST 2014] turns out to be before the current time [kill Feb 04 16:04:41 MST 2014]

  Bounce just the application server running the client code has solved the problem, but we would like to better understand what is happening and why. Nothing of what I can find in the docs seems to indicate the cause/solution and possible solutions have links which seem to no longer work: http://cookbooks.adobe.com/post_Renewing_the_context_to_handle_session_expiry-16410.html

  Any suggestions or insight would be greatly appreciated. Thank you!

  PROBLEM

  Using the same instance of ServiceClientFactory to call remote services exposed by the LiveCycle container can lead to

  exceptions related to the expiration of the assertion

  Solution

  To handle the timeout use the ThrowHandler mechanism provided by the ServiceClientFactory framework

  Detailed explanation

  LiveCycle provides a client sdk for java-based client call its services remotely.

  An invocation involves the creation of an instance of ServiceClientFactory setting user credentials in thefactory instance passes this factory to a customer of service or creating an InvocationRequest directly

  Use the client to perform the actual request.

  For more details, see Invoking

  LiveCycle ES using the Java API .

  An instance of ServiceClientFactory once created is valid for a certain

  period of time that is default 120 min., if the same instance is used to call beyond that period, while he leads to an exception indicating that

  the session has expired [com.adobe.idp.um.api.impl.AuthenticationManagerImpl]

  errorCode:16421 errorCodeHEX:0 x 4025 message: could not validate SAML

  Token - Assertion has expired and therefore not valid for the user

  [administrator@DefaultDom]. Its valid until time [Thu Oct 22

  17:07:53 IST

  2009] turns out to be before the current [Thu Oct

  [22 17:58:18 2009 IST]

  This isn't a problem if the ServiceClientFactory instance is used for a short time. However if you want to make a long

  the task as great conversion number of documents to PDF, applying the policies their etc., then it would be a problem.

  Session time-out

  Before fxing the question some info on what is session time-out.

  • When you use an instance of ServiceClientFactory to invoke service suite fow arrives
  • You set credentials in the properties and call the service
  • LiveCycle server side validates the credentials and issues a context. It's the kind of a ticket which can be reused later rather than the actual credentials.
  • After receiving the response from the server the ServiceClientFactory instance deletes its own copy of credentials and instead stores the context for calls more later on that this instance of context is passed instead of the credentials of the user
  • This fow everything is done to ensure that the credentials of the user are not sent for each remote call, thus improving security.

  For more information about the context, refer to

  Identity of the user in LiveCycle .

  Solution

  Fx this problem you need to re authenticate to LiveCycle and get the context new draw. the best way to do this is to use the ThrowHandler provided by the ServiceClientFactory framework

  Step 1 - create a Throwhandler

  ______________________________________________________________________ ______________________________________________

  /**

  * This ThrowHandler caches the credentials of the user and use them

  to update the framework in the

  * ServiceClientFactory to expiration.

  */

  private public static class SimpleTimeoutThrowHandler implements

  {ThrowHandler}

  private String username;

  private String password;

  public SimpleTimeoutThrowHandler (String username, String

  {password)

  me.username = username;

  This.password = password;

  }

  public boolean handleThrowable (Throwable t, ServiceClient

  SC,

  ServiceClientFactory EFC, MessageDispatcher md,

  IR InvocationRequest, int numTries) survey

  {DSCException}

  {if (timeoutError (t))}

  The call to AuthenticationManager does not require

  the authentication if the default properties

  are the people

  AuthenticationManager am =

  New

  AuthenticationManagerServiceClient (ServiceClientFactory.createInstance (getDefaultProperties()));

  AuthResult ar = null;

  try {}

  AR =

  AM. Authenticate (username, Password.GetBytes ());

  } catch (UMException e) {}

  throw new IllegalStateException (e);

  }

  Context ctx = new Context();

  ctx.initPrincipal (ar);

  Refresh the ServiceClientFactory instance with

  the new context

  scf.setContext (ctx);

  Logger.info ("refresh the related context

  ServiceCLientFactory");

  Now say CFS to try again, the invocation

  Returns true;

  }

  Check so that we do not again wrap the exception

  If (t instanceof DSCException)

  throw (DSCException) t;

  If (t instanceof RuntimeException)

  throw (RuntimeException) t;

  How is it possible to get that much?

  throw new IllegalStateException (t);

  }

  Private boolean timeoutError (Throwable t) {}

  If (!) () t.getCause () instanceof UMException)) {}

  Returns false;

  }

  UMException EU = t.getCause ((UMException));

  Check that UMException is due to the

  expiry of the assertion/context

  if(UMConstants.errorCodes.E_TOKEN_INVALID ==)

  {ue.getErrCode ()}

  Returns true;

  }

  Returns false;

  }

  }

  ______________________________________________________________________ __________________________________________

  This ThrowHandler would be invoked by the ServiceClientFactory to receipt of any exception. The manager would then determine if it's a timeout on the exception and then update the context associated with the instance of the factory and told him to retry the invocation.

  STEP - 2 record Manager

  ______________________________________________________________________ __________________________________________

  ServiceClientFactory.installThrowHandler (new

  SimpleTimeoutThrowHandler (username, password));

  ______________________________________________________________________ __________________________________________

  Note: the Manager should be listed only once in the application

  STEP 3 - make your invocation

  Following example would try to apply policies to all the fles present in a directory

  ______________________________________________________________________ __________________________________________

  Properties p = getDefaultProperties();

  p.setProperty (DSC_CREDENTIAL_USERNAME, username);

  p.setProperty (DSC_CREDENTIAL_PASSWORD, password);

  EFC ServiceClientFactory =

  ServiceClientFactory.createInstance (p);

  Now, to make a long running operation

  String inputDirName = "path-of-entry-dir";

  String outDirName = "path - to the-out-dir";

  String policyName = "the-policy-name ';

  Download the file = new File (inputDirName);

  Folder outDir = new queue (outDirName);

  RightsManagementClient rmClient = new

  RightsManagementClient (CFS);

  DocumentManager docManager = rmClient.getDocumentManager ();

  Iterate over all in the inDir pdf and apply the

  policies. If it takes a

  {for (file pdfFile: {inDir.listFiles ())}

  The inDoc document = new Document (pdfFile, false);

  Document securedDoc = docManager.applyPolicy (inDoc,

  pdfFile.getName (), policyName, null, null, null);

  securedDoc.copyToFile (new

  File (outDir, pdfFile.GetName ()));

  }

  ______________________________________________________________________ __________________________________________

  Now the invocation would end even if it takes a lot of time. If any session time-out occurs then our ThrowHandler would take care of it.

  Here's a sample:

  TimeOutSample.zip

• multi, search and replace

  Hi all

  I have tons of paintings including 50 different sizes in metric sizes 55 mm

  I need to convert them into another size-> inches

  the best thing I can do is to create a multi find and replace the conditions:

  find "2.54 mm" change "1 inch".

  find "5mm" change "2 inches.

  etc.

  question 1:

  How to create this multi find and replace in cs4?  Maybe grep?

  question 2:

  can anyone create a simple javascript like dan rodney proper fractions

  will change all the selected items to a custom replacement?

  can be done using an indesign script for easy flow interface?

  need help

  Gil Halevi

  Tavlit

  Well, it's quite different from what you asked initially.

  You're right: blindly all "22mm" does not change "222mm" as well. (Hey! There you go again, it is not "mm" after the number!)

  There are ways around it - use "Find whole words - but, in fact, the script isn't so bad.

  With your specifications change, it now looks like this:

  //DESCRIPTION: Find mm, change to inches
  // By Jongware, 6-Dec-2009
  
  // step 0: verify selection
  if (app.selection.length != 1)
  {
       alert ("Well, I warned you to select something!");
       exit();
  }
  
  // step 1: find mm values
  app.findChangeGrepOptions = null;
  app.findGrepPreferences = null;
  app.findGrepPreferences.findWhat = "\\b\\d[\\.\\d]*\\b";
  
  mmList = app.selection[0].findGrep(true);
  // alert ('found '+mmList.length);
  
  // step 2: convert mm to inches
  var inList = new Array;
  
  for (a=0; a
  Be sure to run on a selection only. So simply select the part of the table where you have mm values and run the script.
  Values that I receive on your sample table are a bit different from what you show, but personally, I'm 100% convinced that I had the right to calculation.
  [Edit] No need to yell. Use FindChangeByList, with whole word options. It.
  		   

• Config log_archive_dest2 to install 11g DG

  Hello
  
  Could someone help me configure the parameter log_archive_dest_2 for a new DG of 11g installation.
  DB primary name: PRIM
  Standby DB: STDBY
  
  while trying to give the command: alter system set log_archive_dest_2 ='service = valid_for = async stdby) online_logfile, primary_role) db_unique_name = stdby';
  His throw me an error: ORA-00439: feature not enabled no: Managed Standby.
  
  Below the pfile in use file:
  
  PRIM.__db_cache_size = 343932928
  PRIM.__java_pool_size = 4194304
  PRIM.__large_pool_size = 4194304
  PRIM.__oracle_base = "F:\Oracle" #ORACLE_BASE the value of the environment
  PRIM.__pga_aggregate_target = 327155712
  PRIM.__sga_target = 532676608
  PRIM.__shared_io_pool_size = 0
  PRIM.__shared_pool_size = 176160768
  PRIM.__streams_pool_size = 0
  * .audit_file_dest = "F:\Oracle\admin\PRIM\adump".
  * .audit_trail = "db".
  * full = '11.1.0.0.0'
  *.control_files='+PRIMARY/prim/controlfile/current.256.703252927'
  * .db_block_size = 8192
  * .db_create_file_dest = "+ PRIMARY."
  * .db_create_online_log_dest_1 = "+ PRIMARY."
  * .db_domain = "
  * .db_name = "PRIM".
  * .db_unique_name = "PRIM" # manually added
  * .diagnostic_dest = "F:\Oracle".
  *. Dispatchers ='(Protocol=TCP) (SERVICE = PRIMXDB)"
  * .job_queue_processes = 1000
  * .log_archive_config = 'dg_config = (prim, stdby)'
  * .log_archive_dest_1 = "LOCATION = + PRIMARY /'"
  * .log_archive_dest_state_1 = 'activate' # manually added
  *.log_archive_format='ARC%S_%R.%T'
  * .memory_target = 857735168
  * .open_cursors = 300
  * runoff = 150
  * .remote_login_passwordfile = "EXCLUSIVE."
  * .undo_tablespace = "UNDOTBS1.
  
  
  Thanks in advance,
  Indira

  00439, 00000, "feature not enabled: %s."
  * Cause: The specified feature is not enabled.
  * Action: Try not to use this feature.

  What is Enterprise Edition or Standard Edition?