technical advice help appreciated!

Similar Questions

• Corrupt mail? My new gmail address mail went down fine. Then I lost a large part of it in the box in. Sent mail seems to reproduce several times in my project. Also in the trash without my help. Help appreciated. Thank you.

  Corrupt mail?

  My new gmail address mail went down fine. Then I lost a large part of it in the box in.

  Sent mail seems to reproduce several times in my project. Also in the trash without my help. Help appreciated. Thank you.

  Yosemite of OS X running.

  Also went to Applications > utilities, disk utility. and 'Repair permissions' restarted when finished. Don't know if this will help future emails.

  To project e-mails, open the preferences Mail account tab select the account gmail and go to the behaviour of the ball. Uncheck the tab where you will store draft messages on the server.

  Give a little more detail on other issues. For the lost emails, they lack also the site of the gmail webmail?

• CD/dvd drive read only disks not vain iv tried everthing I can think of an infusion iv, any help appreciated, thanks lee.

  CD/dvd drive read only disks not vain iv tried everthing I can think of an infusion iv, any help appreciated, thanks lee.

  Hi leejarvis,.

  ·         What version of the operating system is installed on the computer?

  ·         What is the brand and model of the computer?

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         Have what troubleshooting measures you tried?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• Need advice/help on Windows Vista Home Premium OS

  Hello. I use Windows Vista Home Premium for 2009. In the last months, I was faced with a lot of problems and I was wondering if I should re - install the operating system to eliminate the problems or is it better to upgrade to a newer version of Windows? My PC is too slow, it has recently been virus-ed, and every once in awhile, I get an error message saying "operating system not found '. Another problem is that some of the USB ports/CD readers simply do not work. I tried to install/upgrade to update drivers based on the information I see on the forums here and it works for a while, but later goes back to send me some *. Would appreciate some advice/help in this regard. Thanks, M.

  Hi, Meh17,

  "Operating System not found"

  This problem may occur if one or more of the following conditions are met:

  • The basic input/output system (BIOS) does not detect the hard drive.
  • The hard drive is damaged.
  • Sector 0 of the physical disk has an incorrect or malformed master boot (MBR) record.

    Note Some third-party programs or the alteration of the disk can damage an MBR.

  • An incompatible partition is marked as Active.
  • A partition that contains the MBR is no longer active.

  Contact the manufacturer of your hardware

  Perhaps your best bet is contact the manufacturer of your computer or your hard drive. The manufacturer may have a utility that you can use to perform a more detailed analysis for the damaged areas of the disk and help verify the correct BIOS settings. However, the damage on your hard drive can be severe. Sometimes, this means that your only solution is to replace your hard drive.

  How to test my hard drive- includes a link to the test tools

• When I open a PDF file, I get the following message "invalid plugin detected Adobe Acrobat reader DC will leave" I reinstalled Adobe DC but still the same problem, it happens with all PDFs. Any advice much appreciated.

  When I open a PDF file, I get the following message "invalid plugin detected Adobe Acrobat reader DC will leave" I reinstalled Adobe DC but still the same problem, it happens with all PDFs. Any advice much appreciated.

  Hi Stephen39,

  Do you have any 3rd party plugin installed for Adobe Reader? If not, close all instances of Adobe Reader running and delete the entire folder to: C:\program Adobe [version] \Reader\plug_ins.

  Now go to control panel > programs and features. Locate the entry for Adobe Reader X and choose to repair the installation.

  If you do not have a 3rd party plugin installed, try to uninstall them and see if the problem is related to the same. If it works, let me know what plugins have been the origin of the problem so that I can have a look.

  If all goes well, this should fix things.

  Thank you

  Nicos

• HP Pavilion Media Center m8200n Desktop PC upgrades tips and advice help.

  Hello everyone I have a HP Pavilion Media Center m8200n desktop PC that I'm looking to upgrade. Can someone please advice me on the following topics:

  Memory: What is the best possible that my system can contain that currently, I am running windows 7 ultimate 32 bit

  Video card: I'm looking to install a decent video with hdmi support card that my system can contain I am aware that I can not use certain cause of my ability video cards, the upgrade of the power may be an option. Can someone advice me please on these subjects, it will be very appreciated thanks everyone I'll be sure to rep and appreciate all help thanks.

  Without replacing the power supply, the EVGA NVIDIA GT 240 1 GB GDDR5 should work. This card is spec'd for a PSU with 18 amps of bus + 12 volts. This card can stretch your PSU, but give it a try.  I have this card in my system of m9200t.  This card will give the treatment a real helping hand from your video.

  Review the specifications of performance ATI and NVIDIA . Look at the specifications of strip memory bandwidth and level of DirectX support.

  How to replace a video card.

  Your PC will not work with memory dual channel and the processor will dictate the speed of transfer.  Wait for the upgrade of the processor until you see how the system works.

• My time machine is just stuck on the preparation of backup but does not - any help appreciated.

  Hi, my Apple Time Machine is just sitting on "Preparing Backup"... .initially it says cannot backup disks so I hard re - adjust time machine and now he is right on "Preparing backup" for hours and hours, any help would be appreciated.

  'Préparation' is going to take ages if you did a Hard Reset on the Time Capsule.

  Make sure that you are not trying to save more wireless, which will take 3 - 5 times longer, on average, that direct Ethernet connection between your Mac and the time Capsule.

  Even with a direct Ethernet connection, you might see "Préparation" for a few hours before the real return to start.

• Indicator of Smartphones Unknown blackBerry - help appreciated

  Searched around answer to this so apologies if this has been asked/answered before.

  Seeing unknown on my Bold 9870... It's a very small gray/white envelope with a black circle and an icon in the middle of the black circle but it is so small - and my eyes are bad enough! -that I can'tmake outside.  It is also a red dot with the number 1 in it so I think I have 'something' waiting for me, "somwehere", but have no idea. I am not registered for BBM or any social network RSS and Obvs checked my e-mail and text messages.

  Any help would be appreciated gratefully.

  This is the folder in which should come your email... labeled "Messages".

  Some users use specific folders to view their email, which is labeled with the name of their e-mail address by e-mail.

  This main would be just "Messages".

• Constant, failure to update, tried for several hours technical support help, recommended full could not uninstall and reinstall, install now freezes at 74%

  No, I'm really lost and I don't know what else to do and I'm not anxious to be on technical support for several hours again.

  My problem was originally that the hotfix update released last November failed to install. I ask on the forum for help, I got some good suggestions but nothing worked. Since Photoshop still worked I've just postponed the issue.

  Several months later, I decided to try everything I can to get the update to work. Created another Admin removed tried Photoshop by reinstalling. Still no. Tried several different things that do not work.

  I finally got with technical support, I allow access to my computer. They spent several hours uninstalling and reinstalling and not as I did. They did get more advances but after almost 4 hours, I was tired of looking at Photoshop do not settle.

  They said they have done all the troubleshooting that they could, and that the best option was to simply uninstall all Adobe and then reinstall it.

  I did tonight. Following the instructions here are using the Adobe Creative Cloud cleaning tool to solve installation problems

  Now I'm stuck with freezing to 74% on installation of Photoshop. Further research led me to this Adobe CC 2015 Direct Download Links: Creative Cloud 2015 Release | ProDesignTools

  Unfortunately, at the start of the installation, it cannot connect to the internet. I know that my connection is working because I can watch sites Web, but stops install on it. I try connecting later button and he asks a serial Code. I have CC so I is not a serial Code and may not try to generate a.

  If Photoshop used to work but not to update. Now it doesn't work at all.

  I'm desperate, I need help to solve this problem. Suggestions, ideas about why this is happening and what I can do to work around it? My number is 0187559333

  Finally managed to do work. I also tried the update and it worked also. It's been a long day.

  On the downloaded installation, there is an option to install a trial version or install a licensed version. The property stored fault due to the weird internet connection being found and the absence of an activation code. But the installation of the trial worked. Has exceeded the dreaded 74% and kept things.

  The end of installation, I opened creative cloud and looked at the applications tab. The update appeared later. I clicked top and too installed completely.

  Now I just hope the trial realizes that I have a legitimate CC account and that it does not lock me in the coming days.

• Help appreciated...

  This issue is likely so simple, it's embarrassing.

  I created a logo in photoshop and then placed in a file of ID.  I wanted to add text here.  I've laid out, and it looks great.  Then, I combined the image and copied it place in the file of the correct size.   When I resize to fit and then click fit content to frame... everything works fine except the text is not resize.  It's incredibly frustrating.  Any help would be greatly appreciated.

  Could get my head bitten for this, but... Convert the text to outlines, any resizing of the text it will be ok!

• Lack an external SWF in the projection file... help appreciated.

  I created a press kit in Flash Catalyst that contains an mp3 player in the form of a SWF file. When I publish the catalyst project (run locally and deploy-to-web) mp3 player works perfectly. When I opened it the Main.swf in Flash Player, it works perfectly. When I create a file of projection (from Flash Player) the external swf (mp3 player) is missing.

  Any help on this would be greatly appreciated.

  Mick

  Flash Catalyst does not incorporate the .swf file, then it must be present as well as your projection file in order to function properly.

  Try to place the projection file in the local copy of race and see if she works there. If this is the case, make sure that you copy the current folder wherever you place the final projection file.

  -Bear

• Can not access my MSN page the last 36 hours. I get the message "your request could not be processed at this time, please refresh this page or try again later." All the suggestions/help appreciated!

  Nothing has changed on my computer that I know. I use my MSN for my homepage & have had no problems with it before.

  I finally found a solution that worked for me.  I whitelisted and had to disable to My.MSN.com & refresh the page a couple of times.  Strange that it wasn't a problem until 3 days ago - hope this helps some of you!

• Since switching to windows 7, my finger pad no longer works. Any help appreciated

  My finger pad no longer works since moving to Windows 7. I looked good and tried as far as I know how, now I'm lost... Please help!

  You may download your touchpad software which feeds it.  You can do it from the website of your computer manufacturer.  Just look at their section downloads/software/drivers.  You will take just the model number of your computer and they will present you all the drivers they have.  Just take one for the touchpad and install it.

• help appreciated :) driver

  I am tring to use aLinksys AE2500 USB key for the 1st time, he says that he is not a pilot.  This is a plug-in without cable or drive.  I get 2 messages when I trouble shoot: Lexmark X 422 has a driver problem and Linksys AE2500 is not a car.  No changes were made or nothing before that. Everything else still works well. What doe I need to do?  Help thank you

  It is not a flash drive; It's a wireless adapter.

  There should be an installation CD. You can download the Guide and the driver of http://homesupport.cisco.com/en-eu/support/adapters/AE2500

• sfc/scannow cannot fix corrupted files windows 8. DISM / /restorehealth//cleanup-online image does not work! Any help appreciated.

  Hello

  I can't try to repair the corrupted files on my Sony VAIO laptop to Windows 8. I hope someone can help me solve my problems. I would really like to know how to fix these problems I'm having. It really gets me.  If ever I have similar problems in the future.
  All my drivers are up to date. I'm pretty confident that's not a malware issue. I take care of my line on activities that could infect my computer. Although I'm not 100% that excludes. I use Mcafee security Suite (fully updated and free with my broadband package). No other scanners time real AV are running. I However sometimes use a registry cleaner, after installation and installation of various programs. but I only use the default methods, never the registry COMPLETE cleaning cleaning method. In my view, these could create problems if used files. I also defragment my HARD drive of 1 TB at least once a week.
  DISM / / cleanup-image online /restorehealth/ also is not working error message and log files can be found below!
  I ran sfc/scannow and several times,
  whenever I get the error message stating:
  Windows resource protection found corrupt files but was unsable to correct some
  of them. Details are provided in the cbs.log windir\logs\cbs\cbs.log newspaper.
  For example C:\windows\logs\cbs\cbs.log. Note that iis logging currently not
  supported in offline maintenance scenarios.
  When I reboot win 8 after running sfc/scannow. Windows 8 shows that it is far from my system of up to 100%
  It charges fine. I have run the sfc/scannow, and then he did exactly the same thing. I reboot and it updates my system. but does not not my files corrupted!
  CHKDSK /F also freezes 27%. But when I starts in the my Sony VAIO #1 recovery disk and run diagnostics hardware HARD drive repair tool to try to fix the sectors defective etc on my HARD drive
  which works 100% and says there is NO problem!
  Here are the files of newspapers that I can access. I have to admit, now, that I do not understand them.
  even after much reading online:
  20/07/2013
  sfc/scannow eror message =

  Windows resource protection found corrupt files

  but has been unable to find some

  of them. Details are provided in the CBS.log newspaper

  windir\Logs\CBS\CBS.log for example C:/windows\Logs\CBS\CBS.log.

  Note that logging is not currently supported in offline scenarios.

  (ACCESS DENIED) when I try to open the C:/windows\Logs\CBS\CBS.log log file.

  DISM / online/cleanup-image /restorehealth/

  21/07/2013 of the log files and error messages

  0x800f081f

  the source file is not found

  Use the source option to specify the location

  the files that are needed to restore the function. To learn more

  information on the specification of a location of the source,

  See http://go.microsoft/fwlink/?linkid=243077

  The DISM log file can be found at C:\windows\Logs\DISM\dism.log
  I hope that I can help to solve the problems of thses
  concerning
  How to run the command "SFC/scannow" at startup or in Windows 8
  Information

  This will show you how the sfc/scannow command to start or in Windows 8 in an attempt to trouble altered or modified system files.

  Tip

  If you get the error that Windows resource protection could not start the Repair Service when you try to run the SFC, then make sure that the Windows Modules Installer service is active and set to Manual.

  Services - Start, Stop and disable in Windows 8

  If SFC is unable to repair the system files corrupted because the Bank (source) is damaged, then you could run the Dism/online/Cleanup-Image /RestoreHealth command to set the Windows component store corruption and then then try to re-run the SFC scan.

  OPTION ONE

  To run the SFC/SCANNOW command. at startup

  
  1. open a prompt at startup.

  2 in the command prompt, type diskpart and press ENTER, and then type the size of the list and press ENTER. (see screenshot below)

  
  
  
  3 make Act your boot drive drive letters (ex: 350 MB "System Reserved" partition) and the drive of Windows 8, type Exit , and then press ENTER. (see screenshot above)
  NOTE: If you do not a "system Reserved" partition and are not multi-boot with other operating system, then the boot drive and the drive of Windows 8 may be the same drive letter.

  4 in the command prompt, type the following command and press enter. (see screenshot below)
  NOTE: , You will see a blinking cursor at the prompt to the end. It will take a while to finish running though.

  sfc/scannow damaged = C: \ /offwindir = D:\windows

  Note

  You need to replace the the drive letter of the partition or volume where your Startup system files are stored in the offbootdir = C: part of the order above instead.

  You need to replace the letter of your partition or volume Windows 8 in the offwindir = D: is part of the above command instead.

  
  
  
  5 when the analysis is finished, I hope you will see an everything is ok message as below.
  
  
  
  6 close the command prompt and restart the computer to start Windows 8.
  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file system occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the THREE OPTION section below to manually replace the files SFC could not fix.

  SECOND OPTION

  To run the SFC/scannow command in Windows 8

  
  1. open an elevated command prompt in Windows 8.

  2 in the elevated command prompt, type sfc/scannow , and then press enter. (see screenshot below)
  NOTE: It may take some time to complete the race.

  
  
  
  3 when the analysis is finished, I hope you will see that all is ok message as the screenshot below.
  NOTE: Fortunately CFS was able to repair my files automatically damaged system.
  
  

  

  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the THREE OPTION section below to manually replace the files SFC could not fix.

  OPTION THREE

  How to see and read that only "CFS" Scan results from CBS. JOURNAL

  NOTE: SFC when is running, it records its actions in the C:\Windows\Logs\CBS\CBS.log. The steps of this option will show you how to view only specific SFC entries with the [SR] tags in the CBS.log newspaper. This can be useful to show you what files SFC couldn't fix automatically if you want to try and manually change them.

  1. open an elevated command prompt in Windows 8.

  2 in the elevated command prompt, copy and paste the following command and press enter.
  NOTE: This will place a file sfcdetails.txt on your desktop with only the SFC scan details of the results of the CBS. Log in this.

  Code:

  findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >%userprofile%\Desktop\sfcdetails.txt
  

  3 close the elevated command prompt.

  4. open the file on your desktop to see the SFC sfcdetails.txt analysis details in convertible bonds. NEWSPAPER.

  5 when you are finished, you can safely remove the sfcdetails.txt file later if you wish.

  Tip

  If you need to replace a corrupted system file that SFC cannot fix, this will show you how to:

  If you have many files are corrupted, then run Dism/online/Cleanup-Image /RestoreHealth to repair any component store corruption, restart the PC after and try the sfc/scannow command.

  If you have only a little, then you could manually extract a new copy directly from your installation of Windows 8 DVD or USB thumb drive, or ISO if file in a virtual machine.

  Check out the Windows 7 Installation DVD files