CD/dvd drive read only disks not vain iv tried everthing I can think of an infusion iv, any help appreciated, thanks lee.

Similar Questions

• Satellite - CD/DVD drive reads only CD

  I'm abit confused in this situation. My CD/DVD drive reads CDs but does not read the DVD. I don't know if I have to reinstall the driver for the CD/DVD or should be replaced.

  Please can someone help.

  Hello!

  There is no special driver first of all for the CD/DVD drive. The pilot is part of the operating system and should be updated or exchanged.

  I also put t know why the drive isn't reading DVD s more but have you tried to clean the lens of the drive? Therefore, you must use a microfibre cloth than zero of the lens doesn t and be careful!

  In addition, you can boot from a CD?

  Good bye

• CD/dvd drive read only not all disks

  When I put a disc in the drive says that there is no disk in it
  I've uninstalled and restarted the computer, and used the program fix
  and the computer says that it works correctly

  as I looked to filter things and he's not here

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  If necessary:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• CD/DVD drive read only not the discs in Vista

  My CD/DVD read more records. I put in a disc and it does not detect either he (it's as if I was never to put a), or it takes forever to load. Also, I can't read game discs so I can't play my games. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DVD drive read only not the discs in Vista

  my dvd drive doesn't read any disk, yet the device manager says that the device works properly please help

  Hi Bill,

  Please see the following article some troubleshooting on your question:

  http://support.Microsoft.com/kb/982116

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• CD/DVD drive reads but does not write.

  I run XP multimedia.

  When the optical drive no longer works, I ran malware controls, then Mats_Run.dvd.exe.

  "I had to choose and choose fix' reading discs ' which it did.

  "" Write function did not work so I ran /Mats_Run.dvd.exe again with the ' writing difficulty ' option.

  Still, it reads but does not write.

  I installed an external burner and repeated the above; same result.

  When I boot with Vista, the two burners work perfectly.

  Details of virus removal
  Provided by: Malke - MS MVP:
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Also:
  Unexplained computer behavior may be caused by deceptive software
  http://support.Microsoft.com/kb/827315

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• CD/dvd drive read only dvd

  I can play a dvd movie but if I put a cd/rw that I've already burned it does not read (not answer). I never had problems with it before. Help, please

  Hello

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• My CD/DVD drive reads CD but not DVD

  Hi all

  I have a TSSTcorp CDDVDW TS-L633M DVD player in my laptop and after about 6 months of use, the drive stopped reading/writing DVD. It still reads CDs fine and sometimes will read a DVD completely (without provocation and without warning...!) but is very skittish and stops randomly just to play a DVD. Often, the player will eject and give an error message tells me to insert a disc. I don't know what to do.

  I am running Windows Vista 32-bit. I tried to run the Microsoft Fixit application, which recognizes that the drive is unable to read DVD but offers nothing more useful than and doesn't solve anything (despite its name...). I've read through a number of different forums and have found a range of advice: replace the disk, uninstall and reinstall the drivers or editing the registry. What should I do to solve this problem? Naturally, I would prefer not to have to replace the drive itself, but if it's the only way...

  Thanks in advance!

  Mangi

  The registry thing only works if the drive is completely AWOL from the system so that it does not appear as a drive in "My Computer"... not your problem. The DVD and CD using different lasers and it is not uncommon to go wrong and the other not. You can check the operation of the DVD trying to boot from a bootable DVD. If you can not drive is bad and needs to be replaced. If it works sometimes and not others it could just need a good cleaning with a DVD lens cleaner.

• DVD drive reads CD but not DVD.

  I use a laptop Gateway M - 151 X with an Optiarc DVD RW AD - 7640 A ATA device. The player is no longer plays DVDs, although it does not read CD. I have read through similar problems on this site and tried to follow the advice given there. So far I have uninstalled the driver (and reinstalled by rebooting) and removed the UpperFilters and LowerFilters in the registry. I also ran this Mr Fixit: http://support.microsoft.com/gp/cd_dvd_drive_problems, who told me that the problem was fixed when I ran with a CD, but he told me that the disc is unreadable when I ran fixit with a DVD. Other suggestions (for example in the selected answer here: http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/f388ca10-ba0b-4aa6-8f0d-be24034ada3b) do not seem to apply. Is there anything else I can do in addition to open up the computer and check the cables? I don't know what to look for and won't cause other problems.

  I don't know if this is related, but I also ran this Mr Fixit: http://support.microsoft.com/gp/hardware_device_problems, who told me he had a problem with the card Microsoft 6to4 driver, which he is then fixed by put it back automatically.

  Get a DVD cleaning disc and use it to wipe the drive.  Your drive uses different leaders internally to read CD and DVD so if one works and the other does not, a dirty car may be the cause.

  "mgon9894" wrote in the new message: * e-mail address is removed from the privacy... *

  I use a laptop Gateway M - 151 X with an Optiarc DVD RW AD - 7640 A ATA device. The player is no longer plays DVDs, although it does not read CD. I have read through similar problems on this site and tried to follow the advice given there. So far I have uninstalled the driver (and reinstalled by rebooting) and removed the UpperFilters and LowerFilters in the registry. I also ran this Mr Fixit:http://support.microsoft.com/gp/cd_dvd_drive_problems, who told me that the problem was fixed when I ran with a CD, but he told me that the disc is unreadable when I ran fixit with a DVD. Other suggestions (for example in the selected answer here:http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/f388ca10-ba0b-4aa6-8f0d-be24034ada3b) do not seem to apply. Is there anything else I can do in addition to open up the computer and check the cables? I don't know what to look for and won't cause other problems.

  I don't know if this is related, but I also ran this Mr Fixit: http://support.microsoft.com/gp/hardware_device_problems, who told me he had a problem with the card Microsoft 6to4 driver, which he is then fixed by put it back automatically.

• Change of external hard drive read only to read & write

  Windows 7 64 bit - I have a drive external hard usb with a normal status of reading & writing. However, he has now suddenly become read-only. I don't know what I did to make it. Can someone tell me how I can reverse this situation back to read & write?

  It does not explain how he got in this State, but you must use Diskpart to remove or set state single reading on a drive.

  This process used to clear read only status on a disc. Commands typed are in bold:

  Microsoft DiskPart version 6.0.6002
  Copyright (C) 1999-2007 Microsoft Corporation.
  On the computer: DELL755

  DISKPART > list disk

  Disc # status size free Dyn Gpt
  --------  ----------  -------  -------  ---  ---
  Disk 0 online 233 GB 0 B
  Online disc 1 112 GB 0 B

  DISKPART > select disk 1

  Disc 1 is now the selected disk.

  DISKPART > list volume

  Volume # Ltr Label Fs Type size status Info
  ----------  ---  -----------  -----  ----------  -------  ---------  --------
  Volume 0 D DVD - ROM 0 B no media
  Volume 1 C NTFS Partition system healthy 233 GB
  Volume 2 E 112 GB of Partition FAT32 healthy Untitled

  DISKPART > select volume 2

  Volume 2 is the selected volume.

  DISKPART > detail disk

  Maxtor OneTouch III USB Device
  Disc ID: BA52D44C
  Type: USB
  Bus: 0
  Target: 0
  LUN ID: 0
  Read-only: Yes
  Boot disk: No.
  Disk swap file: No.
  Disk hibernation file: No.
  Crash dump disk: No.

  Volume # Ltr Label Fs Type size status Info
  ----------  ---  -----------  -----  ----------  -------  ---------  --------
  * Volume 2 E 112 GB of Partition FAT32 healthy Untitled

  DISKPART > detail volume

  Disc # status size free Dyn Gpt
  --------  ----------  -------  -------  ---  ---
  * Disk 1 online 112 GB 0 B

  Read-only: Yes
  Hidden: No.
  No default drive letter: No.
  Shadow copy: No.
  Disassembled: No.
  BitLocker encrypted: No.

  Volume capacity: 112 GB
  Free volume space: 75 GB

  DISKPART > attr disk clear readonly

  Attributes of the disk successfully cleared.

  DISKPART > attr volume clear readonly

  Attributes volume successfully cleared.

  DISKPART > detail disk

  Maxtor OneTouch III USB Device
  Disc ID: BA52D44C
  Type: USB
  Bus: 0
  Target: 0
  LUN ID: 0
  Read-only: No.
  Boot disk: No.
  Disk swap file: No.
  Disk hibernation file: No.
  Crash dump disk: No.

  Volume # Ltr Label Fs Type size status Info
  ----------  ---  -----------  -----  ----------  -------  ---------  --------
  * Volume 2 E 112 GB of Partition FAT32 healthy Untitled

  DISKPART > detail volume

  Disc # status size free Dyn Gpt
  --------  ----------  -------  -------  ---  ---
  * Disk 1 online 112 GB 0 B

  Read-only: No.
  Hidden: No.
  No default drive letter: No.
  Shadow copy: No.
  Disassembled: No.
  BitLocker encrypted: No.

  Volume capacity: 112 GB
  Free volume space: 75 GB

  DISKPART >

  You will need to remove the read-only disk State before you can remove the read only status of volume

• How can I make an external USB drive read-only?

  I'm trying to find a solution to take a USB HD in a spacing classified environment / air.  If I can make the drive read-only (like I gave him that I need to copy on these machines), then the Agency will probably approve the device.  I can't use DVDs that data are 30 + GB in size.

  Hey there, capsfanva!

  Welcome to the communities of Apple Support! It seems you need to set permissions on an external USB drive or hard drive. These permissions setting is a great way to improve the security and privacy of these elements. You've come to the right place and you will find the answer below. You must connect the device to your computer and follow these steps:

  Set permissions for the items on your Mac OS X El Capitan:

  See you soon!

• How to make Toshiba USB 250 GB HARD drive read-only?

  Hello

  I just plug a Toshiba USB 250g external hard drive to replace all the sticks of memory, I've been using.

  I'll use this external hard drive to copy files to other computers and I would like to know how to make the drive read-only.

  Moreover, all the other tips to protect the disc would be extremely welcome.

  I use a Dell with Windows 7 laptop.

  Thank you very much

  Dougal

  I don't know what HARD drive you have exactly, but I know that Toshiba offers a software protection with external hard drives.
  Did you check manuals? Is something like that provided with your HARD drive?

  Maybe you need to use some third party software part for the protection of files on the HARD drive. Google all over the place.

• How to judge whether a data store is read only or not?

  Hello

  VI client, when I select the 'Mounting NFS read-only' checkbox during the addition of a storage, the storage will not be listed during VM creation.  I checked the MOB and the SDK web page, but have not found how to judge whether a data store is read only or not.

  Do me a favor please.

  -Akityou

  You should be able to get this information out of the HostMountInfo under mode http://www.vmware.com/support/developer/vc-sdk/visdk25pubs/ReferenceGuide/vim.host.MountInfo.html

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• How can I create a pdf file that is read-only as a resume so that no one can change it

  How can I create a pdf file that is read-only as a resume so that no one can change it

  Hi carolanns81914351,

  You require the Acrobat application for this, see this KB document for the parameters to restrict modification of a PDF Acrobat help. Securing PDF files with passwords.

  Let me know if you have any additional questions.

  Kind regards

  Nicos

• have windows Defender installed on xp.updates come to him, he will not refresh. I find no shortcut to run the program. Any help

  Defender of the installed window xp. Updates, download the program, but do not install. Cannot find the shortcut to run the program. Any help?

  Hi MichaelMc Leish,

  You did it changes on your computer before this problem?

  You can follow these links and check if the problem persists.

  Troubleshooting of Windows Defender

  How to troubleshoot Windows Defender definition update

  Hope the helps of information.
  Please post back and we do know.