Tecra 8000: Question about the possibility of upgrade

Similar Questions

• Tecra 8000: Question about upgrade hard drive

  Hello

  I recently bought laptop Tecra 8000 PII 400 MHZ. The laptop has 10 GB of hard drive.
  I want to increase my hard drive, which is a maximum size of the HD can I increaes in my laptop?

  Thank you

  Hello

  Unfortunately there is no official document on a maximum size of HARD drive, but I think you can use a 20, 30 GB without any problem.
  You can ask the service for a partner caught max supported size HARD drive or HARD drive dealer.

  Good bye

• A few questions about the Qosmio F20 upgrade

  First of all, my English is not very good!

  I want to improve my laptop. I want a new graphics card and a new processor.
  My questions are what standard mxm has my cell phone (I have a GO6600)? Where can I buy a new one?
  The cpu can be improved? If so what CPU? Can be installed on a dual core?

  -Does anyone know how the open a Qosmio f20.
  I opened all the screws on the site but I can not open it... What should I do I open Notepad?

  My laptop dvd drive is very strong when I play games... it works all the time and I have made many drowning.
  Do you know how to reduce noise?

  thx for the answers

  Hardware upgrade on laptops is not comparable with the workstations where you can upgrade almost everything. Mainly on laptops, you can improve RAM, WLAN, HARD drive or maybe BT but all that s.

  Update graphics card is definitely not possible because the graphics card is part of the motherboard. Update CPU's might be possible, but certainly not recommendable. The construction of any material is designed by technicians and configured to provide optimal use. If optimal use, you understand very good performance but without the possibility to destroy the material. The common problem on mobile computing is heat and how to cool the hardware components.

  The best graphics card and CPU using the material temperature is much higher and the result can be permanent running fan or just property damage. If you think about all this stuff, I hope you understand that this type of upgrade can be very risky.

  If you need to better and more powerful portable computer the best option is to sell your old and buy newer with the best hardware configuration.

• Tecra 8000: Question on the AC adapter

  Sorry bad English.
  The power suply to my tecra 8000 does not work it is not the wire but the receiver most? in Notepad. I have a new laptop, but there are some files inside the tecra and because I have no power I can't reach it. Does anyone nows a solution that won't cost me a lot of money?
  Greetings:

  Hello

  I'm not sure what you mean by 'receiver' on the adapter, but if the AC adapter is dead you will need a new.
  The Tecra 8000 uses this AC adapter: PA2450U - 15V, 3A, 45W
  If you want you can try to google for the part number and I'm sure you can find some good offers.
  You can also order this part form the Toshiba service partner in your country.
  It is a way easier to buy some supported and compatible.

• Tecra 8000: Question on the HARD disk and the password

  Hi all
  A market recently my son bought an old laptop Toshiba T8000.

  Personally, I have absolutely no knowledge of the laptop myself as a desktop is everything I've ever used.
  However, I recharged the battery and the power, it asks for a password, even if what I believe to be the HD is missing (Vacant housing, left under the keyboard and behind the battery)

  Our local store offers him an incredible £121 a new HD

  HA wasted his pocket money on it or can he get a password and the HD at reasonable price to fit?

  Any help is greatly welcomed.

  BREZ.

  Hello

  Especially the password appears at the beginning of the startup procedure because the BIOS password has been set.
  Unfortunately, you cannot delete or remove the BIOS password if the old password of BIOS is not known to you. Either contact you the person who sells you the device and ask for the password or you will contact the service partner in your country for a deletion.

  I guess that's a Tecra 8000 with the number PAT80XE.
  This unit is a little older and so I think that hard drives are rare, a little so more expensive.
  By the way: the device supports an EIDE HARD disk interface

• Tecra 8000: questions about memory, mouse and screen

  Hi, im using a tecra 8200, mouse keeps drifting upward left after 30 minutes? keyboard problem?
  Sometimes the screen displays changr, from very dark then normal?
  Finally I was told that I can put in a module of 512 mem alongside 256 existing will this work.
  Thanks for any reply Biffo

  Hello

  As you know on this path it is not easy to give you a good answer on all these problems. The same happen to me with my mouse, but AFAIK it's normal because the mouse must obviously be calibrated again and again.

  Daniel is right about the memory. You can use two modules with 256 MB (PC100 256 MB - PA3069U - 1 M 25). 512 MB should be max according to the specifications of this unit.

  Good bye

• Question about the possible use of MSVC 2008 Express as an external compiler CVI 9.0

  I was looking for these messages looking for information on the use of the ICB with external compilers, especially from MSVC 2008, and I came across this ad are about 4 months:

  "CVI 9.0 and MSVC 2008 express.

  The title of this announcement means that the freely downloadable 'express' version of MSVC can be used with CVI 9.0, but the body of the message is not in the details.  But I would really like to know if this is possible, and I'm guessing there are others here who could be very interested as well.  Page 8 of the CVI 9.0 release notes does not indicate that the Express version is supported, which makes sense.  I say this because I always thought that "express" versions of the MSVC were only to create .NET applications (C + c++ / CLI) and applications not native to Windows.  Or does change with the release of MSVC 2008 Express?

  There is no hurry to answer...

  JB

  If you have a CVI 9.0 FDS(I'm not sure about the BDS)

  Select Options/Build Options

  Select the Select button to the right of 'compiler active'.

  Click 'new' to create a new configuration of external compiler

  Select MSVC 9.0 as a model.

  Choose a configuration name (what you choose to CVI) and a destination file (where the external compiler settings will be stored).

  Click OK

  After that, you can easily select the optimizing level and the level of warnings that you need through the "Edit" in the box "compile to realease configuration.

  Kind regards

  Nicolas

• Satellite P10: Question about the limits of upgrade of RAM and HARD drive

  What are the limits to upgrade my laptop Satellite P10? Currently, I use 1 GB of RAM (2 x 512) and I still have the original 60 GB 4200 RPM HARD drive. I'm mainly interested in upgrading my hard drive to at least get a 7200 RPM 100 GB disc. Better would be one of the ones 24 hours server as Hitachi HTE721010G9AT00, I have just turned off my computer. Which one to take and are there limits (BIOS) (keeping in mind that there will be 200 and even the 250 GB drives next year)?

  RAM: should I put two 200pin SO-DIMM 333 or 533 or should not change at all as it works very well and stabil now?

  Hello

  In my eyes you should follow the guidance of Toshiba line and must use the memory modules that are recommended in the user guide. But if you can also try to test with 400 Mhz or 533 Mhz. I think that each dealer notebook or memory could do that.

  I think the BIOS might be able to handle the hard drive with capacity of 30 GB / 40 GB / 60 GB / 80 GB, Bus Master IDE with ultra DMA 100 synchronous
  In my opinion the BIOS does not recognize the larger HARD drive.

• Tecra M3 - questions about the RAM maximum and graphics driver update

  Hi people,

  I have a Tecra M3 (Variant FBCF with the Geforce 6600 w / 128 MB) and I have two questions that I hope someone here can help me with:

  (1) what is the maximum amount of RAM that I can install here? The manual says 2 GB (2 x 1 GB), but I do not see why the laptop would be paralyzed this necessary way, cause as far as I know the 915G chipset can handle 4 GB of RAM. If anyone knows definitively what?

  (2) the latest drivers from nvidia for XP are 2005. As most of you probably know, nvidia systematically more than past performance with versions driver and adds compatibility with some games that end up in trouble. The real driver from the nvidia site does not install because it says that it cannot find any compatible hardware. Can't Toshiba even a pilot updated annually? There is a driver of 2007 for Vista, I can't believe that if they did, they decide refresh the XP one while they were to him. Any chance of their audience on this here? I could force the nvidia.com driver to install, but I don't think that it's necessarily a great idea.

  Thank you!

  Hello

  the maximum amount specified for this machine memory is 2 GB and 4 GB not but you can try it with 2x2gb modules.

  With regard to your graphics: Don t use the nvidia driver since it is not suitable for mobile graphics chipsets and has no timing in the driver that is needed to run flawlessly.

  I'd rather you to view laptopvideo2go and download some drivers here. :)

  Welcome them

• A few questions about the Portege R100 upgrade

  Hello

  I have a Toshiba Portege R100 of America with 768 MB of RAM, 40 GB HDD, DVD-ROM on the PCMCIA card. I want to renew the Windows XP Pro Notebook by updating the material.

  -How can I update a larger HARD drive?
  -What RAM should I update?
  -Can I upgrade the processor?

  Thank you for your help.

  holger112

  Hello

  You cannot switch the processor!

  You can upgrade the HD, but because it is an interface 1.8 "HD with an ide (50 pin ATA) the best you can find is a 60 GB HD (Toshiba MK6006GAH 60 GB) you can find them on ebay for a reasonable price

  You can easily switch from memory with a module 1 GB pc2700-dimm ddr1 (like kingston or corsair) in replacement of the module of 512 MB to a maximum of 1.2 GB.

  You can buy them everywhere

  Also note:

  install XP on a R100 is not very easy, but you can find lots of information on this forum, as here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19232

  success

• Question about the possible television series total bit rate discrepancy

  Hello, I started recently to buy some from Itunes TV shows when I noticed something I was curious about. I noticed that when I look at the "total sampling rate" for none of them via "My TV Shows" in Itunes, they tend to be a little higher than the sampling rate total on the physical files that I have. For example when you look at the an M4V file that is lists the total flow as being '5257' but must I go to my tab TV shows from Itunes and watch the news for that same file, it shows the total flow is "5663." I'm just curious as to why they are apparently different when the size of the two files are apparently identical.

  Also as a note on the side of something else that I've been curious to know is why is the size of physical videos always slightly more small then what is stated on the page of the show? For example, the first episode is 968 MB but the file is only 923, however after that, in the peripheries, it shows (968,071,723 bytes) Does this mean that it is actually the same size, it's just that how M4V are compressed it occupies less space because of its format or something?

  Any help would be appreciated, I'm relatively new to actually buy things via Itunes so I want to just make sure I know all the details, for example I just found out the other day, after downloading an entire show, I had to set it manually to download 1080 p, otherwise you end up with 720 p instead, which means that I had to re - download it all again.

  * BRACKET

• Tecra A2 - Question about the different stacks

  You have a problem with getting a new battery for a Tecra A2 PTA20A 20R002. The battery that came out of the laptop is a PA3356U-2BAS. Product Toshiba says that the battery is a PA3356U-1BAS or PA3357U-1BAL (high capacity).

  Is the PA3356U-1BAS PA3356U-2BAS and PA3356U-3BAS (incidentally)?

  Also can I can use PA3357U-3BAL instead of the PA3357U-1BAL?

  I find it difficult to source the battery the numbers indicated on the technical specifications of Toshiba in Australia (can't find compatibiles). PA3357U-3BAL seems to be pretty easy to find.

  Thank you

  Andrew

  Very interesting! :)

  Thanks for this feedback!

• Tecra M3: Question about the length of battery life

  I used to have a M2 which had a battery life of approximately 3 hours and 45 minutes. Last January, I had a M3 and was surprised it was only 1:30 running just Word and a memory low music program. Closing of the screen and running the program of music made him until 1:45. I thought it was because he had a faster processor, etc., but two of my friends also had Toshibas and they thought it was a battery problem.
  So what is the battery life of the 1.83 GHZ M3 supposed to be?

  Hello

  According to the description of the unit, the battery should run about 3 hours.
  But the battery working time depends on many different things, and this isn't a precise value. CA? s very important how you use Notepad, what programs are running, how old is the battery, how devices run is together, etca? ¦
  In this case generally Ca? s not easy to tell if the battery has a fault or not.

• Questions about the video card upgrade

  I have a t HPE-310 (CTO) with an Intel i7 processor and an AMD/ATI HD5450 graphics card.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=4242292&CC=CA&DLC=en&LC=en&JumpID=reg_R1002_USEN _...

  I want to upgrade the graphics card to better manage the Guild Wars 2.

  I am looking to buy an AMD/ATI HD6850 and a CS600 Corsair for power.

  Is this a reasonable combination for my computer? Are there other combinations you would sugget instead?

  Also, there are other problems, I need to be careful?

  SteveW44,

  If you meant the CX600 Corsair, I anticipate no problems. Enjoy!

• Question about the possible future re - install

  I'll be updating my Design Creative Suite Standard. I bought CS5 as a Cabinet. I see that those who are no longer available.

  My question: what do you do if you need to do a reinstall if you have no media?

  I must admit, I thought also that you ask on the re-download CS5 - which is the link provided by Romsinha.

  CS6 links are here

  http://prodesigntools.com/Adobe-CS6-direct-download-links.html