Tecra M2 - updated BIOS is not supported

Similar Questions

• Satellite R830-143 - update of the BIOS does not support this operating system

  Hello

  I received a notification via Tempro that he did not have a BIOS upgrade. I downloaded the ZIP file (bios - 20120209125153.zip), extract the package (BIOS360_EC140_WIN.exe) and ran it according to the instructions.

  The package runs, give the progress bar "extract files...". ", then displays a dialogue entitled"TOSHIBA BIOS package Ver.4.1.2"that says:"this package BIOS does not support this operating system."

  I am running Windows 7 Home Premium 64 - bit on a Satellite 830R-143 with the short part No. PT32LE

  Does anyone know what is the problem?

  Thanks in advance for your help...

  Hello

  You have problems with the laptop?
  If not then why you want to do the BIOS? Just because the new BIOS is released?
  I would not change anything if my laptop is running correctly.

  However, the update of the BIOS requires the VAP (value added package).
  So remember that this PPV is installed correctly. If this isn't the case, so far.

• 3.70 BIOS update for model ptm50e Tecra M5 says this computer not supported

  After you download an update of the BIOS for my Tecra M5 PTM50E model when I try to install it, says this computer not supported and yet it was obtained from the download page of Toshiba for my model? Also said the Management Console download also machine not taken in charge when I try to install that?

  Can anyone help?

  Hello

  I agree with Akuma
  The common Modules must be installed before you attempt the update of the BIOS.
  The common Modules is an essential component of Windows systems.
  It is required to TOSHIBA's other original programs to work properly, as the update of the BIOS!

  Welcome them

• Tecra 8200: update BIOS: the utility is not available in V86 mode?

  I want to update bios for Tecra 8200, but is to show "the utility is not available in V86 mode."

  Please help me

  Hello

  James is quite right. To use this device there is only an update of the traditional BIOS available. If you want you can consult the FAQ update of the BIOS page. You can find it under http://www.toshiba-tro.de/gcc/biosinfo/index.html

  Good luck!

• HP 250 G4: update Bios stuck (HP Support Assistant)

  Hello

  I was updating some drivers through HP Support Assistant, and BIOS update got stuck as shown on the picture below. I was hoping that someone will be able to direct me what to do next. I'm afraid the computer restart or stop the installation.

  If I stop and install an update of the Bios from another somewhre, that will maybe bad installation?

  Thanks in advance,

  Miloš

  

  Hello

  You are welcome

  The flash would have occurred at the start, so that this didn't happen, your existing bios revision will not have been affected.

  My personal opinion would be not updated the bios unless the update fixes a problem that you are experiencing or adds additional functionality you need - if the machine is running Ok, there really is no need to update.

  Note:  I see in your screenshot that your current bios revision is F.1A - there are 2 dream later listed for your laptop.  The HP Bios updates are cumulative, so if you don't want to update, the latest version will contain all the corrections/improvements offered by previous versions - the last enumerated revision is here.

  Kind regards

  DP - K

• Tecra A3: update BIOS "bad rom file szie" [sic]

  If I try to update my bios, I get an error message "bad szie rom file" and Yes, it's the way it is spelled.
  Also when I try to update the software for my multidrive - Toshiba sent me the link for him - said: 'drive not found '. What is going on??

  Hello

  Tecra A3 is pretty new and it will be interesting to know why you want to update BIOS. Y at - it no problems with it?

  What BIOS update doesn't run windows or traditional? If you have any problem, don't do it at all.

  The problem with your multidrive is a bit confusing to me. What software you should install?

• Update ATI driver not support Catalyst Control.

  I got the auto update from ATI and resarted my computer several times.  I keep getting the warning message that the ATI graphics driver doesn't support Catalyst Control Center.  I need to activate or update.

  Control Panel - device - graphics card - RAdeon 3200 HD 3200 graphics manager - told me that it works correctly.

  I tried to activate.  There is nothing new to activate.
  I went to the ATI Web site to update, but do not see my serial number.  I have Vista Home Premium.

  My graphs changed, but still very readable.  What should I do?

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you in Vista Hardware and drivers Forum above.

  See you soon. Mick Murphy - Microsoft partner

• Pavilion laptop: update BIOS do not install via HP Support Assistant

  This update of the Bios goes through the motions of installing but the HPSA still shows the exceptional update after installation.  The latest version of Bios, that my laptop is 2016.03.09 F.17.

  No idea how to solve this problem?

  Hi @Juliesctt,

  It should not come back again.

• Tecra A11 - update Bios proposed - needed?

  Hi - I have just been offered a BIOS update for my Tecra A11 - 17N (Via Toshiba Service Station) - updated to v3.10 BIOS...

  Clicking on implementing up-to-date offers no details about what it contains fixes / improves - it is just said basically "install and the computer will restart several times.

  My Tecra works perfectly - no problems at all. Should I ignore it?

  Hello

  In my opinion, the update of the BIOS is unnecessary if you have no problem with the laptop. It turns out that the update of the BIOS is always a sensitive technique and if it s not really necessary, I wouldn't

  I always took this advice; never change a running system ;)

• Store.E TV + updated with Firmware not supported

  Hi all

  Since then, I was unhappy with the original firmware due to the absence of some support from subtitile.

  I updated it with playon version PV73100_v7.06.r1199 playon.unixstorm.org firmware

  Now my device is functional, but not on the remote control buttons work except the power button

  I do not know how to uninstall. :(

  Can someone help me on how to uninstall.

  Thank you

  Try this page:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  Choose here:
  Options
  Training devices
  Multimedia hard drives
  3.5 inch StorE TV +.

  Now you should be able to get the firmware 2.12_UI1.0

• Pavilion 14z-n200: update BIOS page not available

  Laptop very slow to start and respond to the entry. Then, after some use crashes and blue screen with the message "tread stuck in device driver".

  Have very slowly downloaded and installed updated drivers. No help. Also found info from other sources that a BIOS update may cure the problem.

  However, go to the support page for this BIOS HP gives me this:

  "Cannot access the system at the moment, we are sorry, but an error has occurred and we are temporarily unable to access the system you're looking for right now. Please check back soon. »

  Same thing for the last 3 days.

  DRM for all the ideas it seems to be no way to contact HP without coming up with $$. Retirement and income securities fixed.

  Hello

  No problem with me, please try the following link:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-14-notebook-PC-series/6529939/model/6787676

  Kind regards.

• Satellite A300-1mz: update Bios or not?

  Hello...

  I have a Satellite a300-1mz PSAGCE and I've never update of the Bios. It is bios Insyde 1.70 (24/11/2008)

  [This | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 781 & selSho rtMod = 746 & language = 13 & selOS = 26 & selType = 4 & d = yearuploa & monthupload = & dayupload = & useDate = null & mode = Chinas allMa & search = & action = search & macId = & country = all & be lectedLanguage = 13 & type = 4 & page = 1 & ID = 67131 & DISO =-1 & driverLanguage = 42]

  Should be the latest version, right?
  If I decide to upgrade, what are the benefits? It is really necessary or just recommended?

  Furthermore, if I would upgrade with a new 500 GB hard drive, it works correctly with the bios 1.70 or new hard drive needs higher BIOS?
  Finally, what hd you advice for me between this two samsung [HM500JI | http://www.samsung.com/global/business/hdd/productmodel.do?group=72&type=62&subtype=67&model _ cd = 446 & ppmi = # 1159] * and * [HM500LI | http://www.samsung.com/global/business/hdd/productmodel.do?group=72&type=62&subtype=67&model _ cd = 373 & ppmi = # 1159] and this wd [wd5000bevt | http://www.wdc.com/en/products/products.asp?driveid=506] especially low noise and temperature?

  The current 250 GB fj-simens is very noise and she is very hot with little work...
  I would like to find a hd that does not exceed 45note ° with all night, video editing and long scan and which will be very quiet...

  Thank you

  > If I decide to upgrade, what are the benefits? It is really necessary or just recommended?
  The BIOS update is recommended only if you have problems with your laptop.
  If your laptop is running properly, then a BIOS update is not necessary!

  > Besides, if I would upgrade with a new 500 GB hard drive, it works correctly with the 1.70 bios or new HDD needs higher BIOS?
  The new HARD drive should be recognized by the BIOS correctly event it s an old version.
  It's not easy to say what HARD drive is the best.
  Usually faster HARD drive with rpm higher can be stronger and can develop more heat as a slower HARD drive.

  But in most cases it is not question of speed, HARD drive is it shouldn't t be a temperature problem

• Update BIOS does not work on Satellite C670-16th

  Hello
  I tried to install an upgrade of the bios on a C670-16th, but I get the following message

  ?????????
  ?????????,???? Windows?

  How to solve this problem?

  Thanks in advance
  Hugo

  You try to install this update the BIOS?

  This is the version 2.30 win.

• Tecra A6 - update BIOS - "the size of the ROM file is incorrect.

  Hi, I was sent this link to download a new BIOS
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?id=60307&OSID=10&drive rLanguage = 42 & selectedLanguage = 13 & driverCountry = 41 & selectedCountry = 8

  But when I try to use set up, I get an error message that says: "the size of the ROM file is incorrect" and it doesn't let me move forward. How can I, please?

  Paul

  Hello

  Maybe this article can help you http://support.toshiba-tro.de/kb0/TSB59014X0000R01.htm

  Good bye

• Inspiron N5110 Bios is not supported for Windows 10

  I have a 3 years old Dell Inspiron N5110 i5 / 8GB ram/Nvidia with Windows home Premium. Very satisfied with its performance and quality. Today, I tried to book the copy of Windows 10 app Windows10 get. After struggling to make the visible icon in my toolbar, I clicked to the reserve and came up with this message...

  

  I'm running on the last BIOS A11, recent windows updates and drivers and still get it. I have 2 older laptops to about 3-4 years of my Dell and both qualified for Windows 10. Is it me or are there other N5110 users get this? Is there any other BIOS fix for this? Is there an official solution from Dell on this problem? Is there a possibility Dell remedied before July 29?

  Hello

  Thanks for joining us. Windows 10 is still in development stage, we ask you to wait for the official release. Make sure that your machine is up to date with Windows updates. We are looking in the message.

  Thank you