Tecra S3: hardware upgrade - CPU, RAM, HARD drive

Hello

I just got a laptop from my company and it's 2 a bit slow for what I do, so please advise me on a hardware upgrade or point me in the right direction to ask this question.

My Tecra is S3 model PTS30E - 01P01CG3 Y5120397H series, it is about three years old and I would like to upgrade:

1 - CPU Intel Pentium M1.86 gHz, I can replace it with a dual core or core 2 duo of?
The motherboard does it take? What is the most powerful CPU it can use?

2-ram memory is 1 GB and I want to place as much as possible. 2 GB is the best that I can place?
Can you recommend a brand of RAM which would give exceptional results?

3-disk HARD 80 GB comes, and I also want to know if I can replace it with a bigger?
Than do options GB 120 GB, 160 GB, I have more? These HDD fit as the size in my laptop?

4-If you have any other recommendation of dope performance, please let me know.

I live in Romania, I'm not sure where can I make these upgrades. What is the nearest place?

Thank you and have a nice day.
Florin.

Hello Florin

Tecra S3 is old enough laptop model, and expect too much with upgrades, especially with the CPU. Of way General CPU cannot be upgraded and perhaps should not be upgraded. Each laptop model has a specific design and cooling modules are optimized for the specific hardware platform.

1. so, for you it is important to have the laptop stable without damaging the hardware. Okay, just for the record
Tecra S3 comes with separate Intel Mobile Pentium-M processors - [1.73GHz/1.86GHz/2.0AGHz (0.748-1.356V)/2.13GHz (0, 748 - 1.372V))]
[/ 2.26 GHz (0, 748 - 1.404V)] and these processors operate at 533 MHz bus clock.
Update CPU not is also not supported if forget it. The CPU you have inside is powerful enough. What you need is more RAM and perfectly configured and optimized operating system.

2 RAM can be upgraded up to 2 GB and it is not the problem. You can use 2 x 1 GB RAM DDR2-400/533 1 GB (PA3411U-1M1G).
This RAM is tested and works perfectly with your Tecra S3 of will be.

3 disk HARD upgrade is also not problematic. Tecra S3 uses SATA HDD and you can improve it with more than 120 GB. I'm 100% sure that you can use 160 GB with no problems.
In my opinion, that's good enough. Isn t it? ;)

4. optimize the operating system. Disable all unnecessary background processes and your Tecra will be working perfectly.

>.. .i don't know where I can make these upgrades.
Do it alone. It is not so complicated. If you need help let us know.
Good bye

Tags: Toshiba

Similar Questions

  • HP Pavilion Ultrabook 14-b005ea upgraded CPU + ram + hard drive

    HP Pavilion Ultrabook 14-b005ea on Windows 8 (64-bit)

    I want to upgrade my sleekbook processor an i3 to an i5, I also would like to upgrade this laptop computers hdd + ssd cache to an ssd of 256 GB full so that increase the ram of 4 GB to 8 GB. can someone help me with this? Thanks in advance.

    Here is the Service Manual:

    Manual

    CPU:

    More quick possible:

    Intel Core i5-3317U (1.7 GHz, turbo up to 2.6 GHz 1 600 MHz/3 MB L3 cache, dual core, 17 W)

    You have:

    Intel Core i3-3217U (1.8 GHz, 1 600 MHz / 3 MB L3 cache, dual core, 17 W)

    The i3 you have is actually faster for most purposes than the i5, although the i5 has Turbo. I would not bother with this upgrade. It is the most difficult and expensive. The processor seems to be welded on so it would take a whole new motherboard, I'm sorry to say. At least try upgrading memory and SSD before committing to try upgrading the processor.

    Memory and hard drive:

    You can install up to 8 GB of RAM and you can install a reader mSATA. However, the memory and the mSATA drive slot are on the back side of motherboard and not easy to do. See Page 59 and transfer to the manual. In general, this model does not have an update very easily. You can replace the hard drive on a regular basis with an SSD without having to remove the motherboard, but it is still much harder than the mobile way. See pages 47-49.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • HP Elite m9280in - upgrade possibilities - RAM, CPU and hard drive

    Ask your help to provide desktop HP Elite m9280in maximum possible power by upgrading the processor, hard drive and RAM. Basic information is given below.
    Motherboard
    IPIBL-(Berkeley)
    Manufacturer: Asus
    Form factor: Μatx
    Chipset: Intel G33
    Storage media: 4 x DDR2
    Front side bus speed: 1333, 1066 and 800 Mhz
    Processor socket: 775
    Expansion slots:
    1 PCI Express x 16
    2 PCI Express x 1

    Processor
    Core 2 Duo E4600
    Speed: up to 2.4 GHz
    Number of cores: 2
    Socket: 775
    Bus speed: 800 MHz

    Memory
    2 GB
    Amount: 2 GB
    Speed: PC2-5300 MB/s

    Hello rajeshdugar, I checked the specifications of your system, which can be found here .

    These features tell you almost all the information you need to improve your system.

    The only concern here is the power of the power supply. It is more likely isn't enough to provide sufficient power to add the maximum processor, video card and memory.

    To do this safely, you must consider replacing the power supply with a higher power supply.

    Given all of these improvements, you could almost buy a new system with these upgraded components for a cost slightly higher than the level of your current system.

    I hope this helps.

  • Qosmio G30-149RU - Question about hardware upgrade (CPU)

    Hello

    I have a toshiba qosmio G30-149RU and my question is possible to make these changes?

    Intel® 945 PM Express chipset

    Intel Core Duo T2500 to Intel Core 2 Duo T7600 processor
    2x512MB DDR2 533 2x2gb DDR2 667
    2 x 100 GB 5400 RPM RAID HARD drive with 128 gb SSD + 500 GB 7200 RPM HARD drive

    one last thing, my qosmio I have NVIDIA GeForce Go 7600 256 MB, but I don't know if it is possible to change or not. If possible, what video card will be the best?

    Sorry for my bad English and thanks for help :)

    P.S.: I got to the House 128 GB ssd and 500 GB hard drive, but others, I'll buy. CPU nearly $ 100, ram near $ 40...

    > one last thing my qosmio I NVIDIA GeForce Go 7600 256 MB, but I don't know if it is possible to change or not. If possible, what video card will be the best?

    No, the graphics card can not be upgraded

    What you can do, it is memory and the upgrade of the HARD drive. This should be very easy and should cause no serious problems.

    Upgrading CPU is little tricky.
    On the page of the Ark from Intel, you can check what are the processors supported by Intel 945 PM Express chipset
    http://Ark.Intel.com/products/27858

    These are:
    Intel Core Duo L2300 of processor (Cache 2 MB, 1.50 GHz, 667 MHz FSB)
    Intel® Core Duo L2400 of processor (front-end to 667 MHz 2 MB Cache, 1.66 GHz, bus)
    Intel® Core Duo processor L2500 (1.83 GHz, 667 MHz FSB, 2 MB Cache)
    Intel® processor Core Duo T2050 (1.60 GHz, 533 MHz FSB, 2 MB Cache)
    Intel® Core Duo T2250 of processor (Cache 2 MB, 1.73 GHz, 533 MHz FSB)
    Intel® Core Duo processor T2300 (1.66 GHz, front side bus at 667 MHz, 2 MB Cache)
    Intel® Core Duo T2300E of processor (front-end to 667 MHz 2 MB Cache, 1.66 GHz, bus)
    Intel® Core Duo processor T2400 (1.83 GHz, 667 MHz FSB, 2 MB Cache)
    Intel® processor Core Duo T2500 (2.00 GHz, 667 MHz FSB, 2 MB Cache)
    Intel® Core Core Duo T2600 (2.16 GHz, 667 MHz FSB, 2 MB Cache)
    Intel® Core Duo processor T2700 (2.33 GHz, 667 MHz FSB, 2 MB Cache)
    Intel® Core Duo processor U2400 (1.06 GHz, 533 MHz FSB, 2 MB Cache)
    Intel® Core Duo U2500 of processor (Cache 2 MB, 1.20 GHz, 533 MHz FSB)
    Intel® Core Solo T1300 processor (1.66 GHz, front side bus at 667 MHz, 2 MB Cache)
    Intel® Core processor Solo T1350 (1.86 GHz, 533 MHz FSB, 2 MB Cache)
    Intel® Core processor Solo T1400 (Cache 2 MB, 1.83 GHz, 667 MHz FSB)
    Intel® Core processor Solo U1300 (1.06 GHz, 533 MHz FSB, 2 MB Cache)
    Intel® Core processor Solo U1400 (Cache 2 MB, 1.20 GHz, 533 MHz FSB)
    Intel® Core 2 Duo Processor T5500 (1.66 GHz, front side bus at 667 MHz, 2 MB Cache)
    Intel® Core 2 Duo processor T5600 (1.83 GHz, 667 MHz FSB, 2 MB Cache)
    Intel® Core 2 Duo processor T7200 (2.00 GHz, 667 MHz FSB, 4 MB Cache)
    Intel processor Core 2 Duo T7400 (Cache 4 MB, 2.16 GHz, 667 MHz FSB)
    Intel® Core 2 Duo Processor T7600 (2.33 GHz, 667 MHz FSB, 4 MB Cache)
    Intel® Core processor Solo U1500 (Cache 2 MB, 1.33 GHz, 533 MHz FSB)
    Intel® Core 2 Duo processor L7200 (Cache 4 MB, 1.33 GHz, 667 MHz FSB)
    Intel® Core 2 Duo processor L7400 (1.50 GHz, 667 MHz FSB, 4 MB Cache)
    Intel® Core Duo processor T2350 (1.86 GHz, 533 MHz FSB, 2 MB Cache)
    Intel® Core Duo T2450 CPU (2.00 GHz, 533 MHz FSB, 2 MB Cache)
    Intel® Core processor Solo T1250 (1.73 GHz, 533 MHz FSB, 2 MB Cache)

    However, there is a question again about the BIOS support. You need to test everything.

  • Pavilion DV8000 upgrade CPU, RAM, HD & OS

    Hello world

    I have a HP Pavilion Dv8000 (Dv8336ea is the exact model number).  I intend to upgrade the processor, RAM, hard drive and OS and have a few questions about the limits of upgrade on this computer.

    He is currently running XP pro, but I intend to upgrade the operating system to Windows 7 64-bit, if I can find an upgrade of the CPU 64 bit appropriate.

    The vehicle currently has an Intel centrino Duo CPU T2300, but I'm not sure which processors are compatible. y at - it an easy way to identify compatibility? I know that it can be removed, but what would be an upgrade recommended for optimal performance?

    Is there a limit to the size of the hard drive, can I install it? He had a hard duel disks. Is there a problem with the installation of a hard drive 7200 RPM? It's the BIOS that limits the size of the hard drive that can be installed?

    Finally, what would be the limit for RAM after CPU and operating system upgraded. What defines the limits of the RAM in a computer?

    Help with any or all of these Q greatly appreciated!

    

    Hello:

    The GeForce Go 7600 is a graphic adapter Windows 7 and should be able to run all the pleasure of the eyes in Windows 7 and have the same resolution that you had in XP.

    Try the latest nVidia driver released for it.

    http://www.nvidia.com/object/geforce_notebook_winvista_win7_64bit_179.48_beta.html

    I see that you have a wide screen monitor... According to the resolution of your screen, with the appropriate driver, he should be able to get 1440 x 900.  That should give you the view you've been waiting for.

    3 GB of memory can be used with a 4 GB max RAM capacity is perfectly normal, even with a 64 bit OS. You need the chipset Intel 965 for the 64-bit OS in order to 'see' all 4 GB of memory. You have the 945 chipset.

    Paul

  • Toshiba Satellite 1730, the upgrade of my hard drive

    My friend told me that I had to upgrade my laptop hard drive (but he didn t say how to get this done)! Is it possible to do this? And if so, how can I do?

    As a first step, it would be interesting to know what Type of laptop (model number) you have. Maybe I can tell you more after this Info!

  • Tecra R10 - how to remove the HARD drive?

    Is there a description available hoe to remove a hard drive in a Tecra R10 and plugin a new hard drive?

    Hey Buddy,

    As far as I know, the HARD drive is placed under the hood of the laptop and so many parts must be removed as a CD player, keyboard, base assy, etc..

    In my opinion it of a delicate procedure and must be done by a technician laptop because a lot of screws must be removed as well.

    Current HARD disk is defective or why you want to exchange it?

  • the upgrade of my hard drive on an hp laptop. How to create a windows cd? KeyCode on laptop wallpaper

    the upgrade of my hard drive on an hp laptop.  How to create a windows cd?  KeyCode on laptop wallpaper

    You n "t do it this way.

    You use cloning software to clone your existing to the new disk drive.  For portable computers, you will need to purchase an external hard drive enclosure which is (a) compatible with your drive (SATA or PATA) interface and (b) compatible with external connections on your laptop (for example, USB, FireWire, eSata).  Do not spend a lot of money for this speaker ($ 10-$ 20).

    If your new hard drive Western Digital, you can get the free cloning (a 'special' version of Acronis True Image) of WD software (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get it separately (this is not an exhaustive list and is in no particular order):

    Acronis True Image Home 11
    EASEUS ToDo Backup
    Paragon Drive Copy or Partition Manager Personal
    Casper
    Norton Ghost

    The process is simple:

    1. Install the software on your laptop for cloning
    2. RTFM (do not skip this step)
    3. Install the new drive in the external case
    4. Connect new player to the computer
    5. Clone original disc on new drive
    6. Stop
    7. Unplug the external computer case
    8. Exchange records (original for external disk) and the new laptop drive
    9. Reboot and enjoy your new drive.

    When you know that the cloning operation was successful, format the old drive, which is now in the external case and use it for backup of data.

  • Unable to start my laptop, error: an unexpected error has occurred. Defective hardware such as a hard drive or the CD-Rom drive which is a failure. Status: 0xc00000e9

    When I tried to boot my Toshiba laptop, I get the message that unexpected error occurred.  Defective hardware such as a hard drive or the CD-Rom drive which is a failure. Status: 0xc00000e9

    \windows\system32\ntkrnlpa.exe file status: 0xc0000098

    Windows failed to load because the kernel is missing or currupt

    My computer did not come with an installation disc.  Best Buy has it

    I need my laptop, can anyone help.

    You download and make the disks to another computer.

    If you continue to have problems to take your machine to a repair shop.

  • Tecra A2 - Upgrade 40 GB HARD drive to something bigger

    Here's my laptop specs.

    Tecra A2-104: Intel® Celeron®...
    Part number: PTA20E-07701QEN
    Main features
    Processor Intel® Celeron® M 330 (1.40 GHz)
    Windows XP Professional
    1 GB OF RAM DDR
    40 GB hard drive. Speed - 4200 RPM. Certification - S.M.A.R.T

    Could someone advise me as to what type of HDD would be better that the current one is not just big enough. I don't want to go buy one and realize that it does not work.

    Thank you

    Hi duff321,

    Upgrade the HARD drive is usually no problem because it s not delicate procedure and if you buy a HARD drive with more RPM (revolutions per minute) and something more grand (120 GB for example) your computer should work a little faster had more high density of data.

    Anyway, motherboards with IDE controller have limitation of LBA 28 bits, which means that you can use hard disks up to 128 GB or with other words 120 GB would be the maximum capacity of the HARD drive and it should be ok because he three times as much as on the old HARD drive.
    I can recommend for example of hard drives from Western Digital, but all other brands should work correctly.

    Just take a look at a few online shops or ask your authorized service provider.

  • Speed up the options for an old HP a1224n. The upgrade possible CPU or HARD drive?

    My a1224n is stuck in programs such as Rhapsody and ITunes run.  I have 4 teenagers with mp3 players, and it seems that more they get, slow tracks of the machine.  Under XP SP3, motherboard is 3 goldfish with a LGA775 socket.  I have all the RAM pushed in there, I can get.  It is not a problem of spyware, I clean, degrag and regedit regularly, firmer all the essential background programs.  It was a long introduction to my question, which is: would changing the CPU or install a higher speed of disk HARD save me, or am I wasting time?  If so, what limits me on the selection of a CPU?  This is a speed of frontside motherboard, socket or something else (I know heat load and the processor speed max are issues).  ... Change my hard drive or install a second hard drive?  I would replace the current 200 GB 7200 rpm HDD with a 600 10 k RPM HARD drive, or simply add a second HD and empty all my media files?  A lot of questions, can't find someone who knows the answers.  Need help.  Here are some indications of the fact sheets: processor Intel Pentium 4 519 (P), 3.06 GHz, 533 MHz front bus, Socket 775.  Motherboard: ASUS LRTP-(3 fish red-GL8E), the front bus at 800 MHz, chipset northbridge 915GV, southbridge Intel ICH6.

    Hello:

    If you have installed 4 GB of DDR PC3200, then if you install used without work, processor Pentium 4 650 3.4/800/2M I think you will see a notable improvement on your current configuration.

    I can't guarantee this will work, but I'm sure it will, based on the information below.

    If you don't have PC2700, your memory performance will suffer with the 800 MHz FSB P4 650 processor.

    Attached are the specs of your motherboard:

    http://support.HP.com/us-en/document/c00361570

    I have a dc7100 with the same chipset, so I'm pretty sure that a P4 650 will work in your. I have a P4 640 (3.2 GHz) I got it for free, so I installed which instead of the 650. If I were to buy one, I would have bought the 650. I installed a P4 650 in a Dell Dimension 4700 with the same Intel 915 chipset. Works great! I upgraded the Dell of a P4 520 to 650 2.8/800/1M and this was a significant improvement. You would increase by nearly 400 MHz and 266 Mhz FSB speed.

    HP has drivers for PC for Windows Vista and Windows 7 64-bit. The only processors that can work with an OS that is supported with the chipset 915, 64 bits are P4 6xx processors. So, I guess that your PC supports processors P4 6xx up to 3.4 GHz, as shown in the plug from motherboard.

    You can get a P4 650 used but works for less than $25 on eBay.

    I do not see an update of the BIOS that requires support new processors, so you should be good to go.

    If your HARD drive is less than 60% full, I see no need for an additional HARD drive. I don't even know if the computer supports a 10 K rpm HARD drive.  I don't know if your machine's HARD drive controller supports SATA II HDD's 3.0 GB/S transfer speeds. I don't think he does.  So no matter what HARD drive you buy would go to 1.5 GB/S SATA transfer speed and you could you jumper the drive for this work.

    The main disadvantage that I see on your PC, it is impossible to install a PCie graphics adapter. Your integrated graphics (GMA900) will not work the graphics of Windows Aero in Windows 7 or Vista. It is not a show-stopper, but a lot of people have improved their PC / laptop computers equipped with the integrated GMA 900 graphics card just for this discover later and were very disappointed. If you were able to install a PCIe graphics card, say a cheap 8400GS 512 MB fanless nVidia card, it would have released a memory embedded amount and you would have noticed an improvement even more.

    So, for an investment of $25 in a P4 processor 650 you could squeeze a few more horses (no pun intended) out of it.

    Other than that, I would look to buy a new PC / opportunity made from 2008. They should all be able to Windows 7 because they would have been Windows Vista capable in 2008.

    I hope this helps.

    Paul

  • Updated the motherboard, processor and RAM and upgraded to Windows 7 Ultimate 64 bit, after upgrade the external hard drive encrypted with bitlocker will not enter the password.

    Original title: bitllocker Windows 7 issue

    Hello

    I recently updated my motherboard, processor and RAM, but I kept my original 500 GB hard drive, and equipped with a hard drive 2 TB extra, after the upgrade, I downloaded windows 7 ultimate 64-bit. After the upgrade I plugged my external hard drive (which has all my stuff important on it, that is to say the photo, video etc.) to realize that I had he encrypted with bitlocker on my old sysem. It allows Me to enter my password, it looks for a USB flash drive key, I did not. My question is:

    Can I replace my old system with the old motherboard, hard drive and the original RAM to remove the external hard drive for bitlocker?

    I still have the file windows.old on my hard drive, I have to restore it and remove the most recent version of windows 7 off the drive. I do this before I rebuild my old PC? I'm stuck here and would not lose all my photos (the wife would kill me!) I would appreciate your help.

    Hello

    Reassembly of the old computer won't help. You will always need the key to open the Bitlocker.

    You can read the articles and check:

    What is the difference between BitLocker Drive encryption and EFS file system?

    Protect your files using BitLocker Drive encryption

    In Windows 7 BitLocker Drive Encryption: frequently asked Questions

    Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  • Upgrade to a Satellite 1805-514 with a CPU and HARD drive

    Hello

    Several years ago I bought the laptop mentioned above. Unfortunately, the laptop no longer starts because of a damaged hard drive.
    Now I'm looking for a replacement. My dealer offered me several hard disks with a capacity of 40 GB to 80 GB. 1805-514 does support large hard drives?

    In addition my dealer gave me a 1, 13ghz Pentium 3 mobile. Does make sense to replace a processor 1 Ghz Celeron with a 1, 13 Ghz P3?

    Thanks in advance and sorry for my bad English

    Samson74

    Hello

    In my opinion, it makes no sense to upgrade the processor 1 GHz to 1.13 GHz to form
    The difference between these two processors is not high and you have no sensation of the increase in the performance of the laptop.

    I put t know compatible hard drives for Satellite 1805 but for Satellite 1800. But these two units are very similar.
    As far as I know, you can use the 10 GB, 15 GB, 20 GB and 30 GB.
    I think that the BIOS will not recognize the larger HARD drive.

  • Envy 15 t: upgrade memory and hard drive HP ENVY 15t

    Hi guys, I just bought the HP Envy 15 not touch t (ae100) with the following characteristics:

    -CPU & graphics: 6th generation Intel Core i7-6700HQ Quad Core processor + Intel HD Graphics 530

    -Memory: 8 GB DDR3L - 1 DIMM

    -Hard drive: 1 TB 5400 RPM hard drive

    I have a few questions about it. First of all, my laptop doesn't have a vacant unit of m2 where I can insert an SSD and if not a SATA 3 2.5-inch SSD fits instead of the hard disk without additional fixing or need support.

    Second, is there an empty memory slot to insert a 8 GB of additional ram.

    Any kind of assistance will be extremely useful and thanks in advance.

    No crack m2. From the Manual:

    Only dedicated support of storage SATA m2 (Port 0) (models with i7 processors and 4 GB memory graphics)

    So if you have Intel HD video only you do not have a slot m2.

    Here's the manual for your use:

    Repair manuals

    Yes on the memory 8 GB 2d module:

    Both not accessible/upgradable module DDR3L-1600 slots double channel memory support 16 GB of RAM in the following conƭgurations ● 16384-Mo (8192 MB × 2)

    Access to the memory and hard drive are obtained by removing the lower cover. Technically this is not allowed to the end user if security is jeopardized.

    A standard 2.5 inch SATA SSD to integrate perfectly in the original hardware for hard disk 5400 RPM. It is a highly recommended update. The 16 GB of RAM not so much, but it's one of those things "might as well" If you are determined to go there.

    Let us know if you need more information.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Upgrading to bigger hard drive... all help & advice?

    I want to upgrade the hard drive on a laptop Sony VAIO 160 G to 320G. My dilemma is not knowing how to transfer the Vista OS, software & data on 160G drive to new 320G disk.

    Any help?

    Sony VAIO VGN-CR26MN_B running Vista Small Business (this is an Asian Sony bought in Saudi Arabia in late 2007). 4G RAM.

    Thanking all in advance for any input.

    First, know that the OS pre-installed are related to the material.  Hardware changes may result in your serial number does not.

    The actual process of "cloning a HD is quite simple.  My personal opinion is that a third party by Acronis application is easy and safe.  The app is called Acronis true home 2012 and there is a 30-day fully functional free trial.

    Make you a cd/dvd to boot-able of acronis, make an image of the operating system current (on another HD) and restore it using the created dvd.

Maybe you are looking for

  • OpenWapp migration to a new device?

    Is it possible to go from the OpenWapp with all contacts and messages from my my flame Keon? I learned by watching his source code, OpenWapp seems to use IndexedDB for storage of conversations.

  • DeskJet 3054A: refurbished ink

    Hello My parents bought me this printer about two years ago, I think that when I moved to College. He works very well until a little it y a. I was buy HP ink specific until this last time. I bought Miejer refurbished brand of black ink that matched t

  • best print quality of phone

    I try to print the best quality photos from my phone I have sprint installed and when I go to print it does not give me the option to select the quality and printing images low quality how to fix this I already put printer on my computer for purposes

  • How to set the transparent color in the BitmapField?

    I display some Bitmap using BitmapField, to create a screen as our Office Windows means icons followed by the name of the application. When I first time poster main screen it seeks it is transparent, but when I move the focus from one Bitmap to anoth

  • WMP12 displays 0 bytes to the size of the playlist

    My worksheet in WMP12 library displays all relevant information for each piece of music by artist, composer, Bitrate, etc. - but 0 bytes in the column size. When one of my playlists is selected with the same layout of the worksheet, they all display