Telephone recording IP Control

Similar Questions

• Problem of sound recording volume control

  I just installed a USB turntable and I have a problem: when I go to control panel, sounds and devices, click the Audio tab, in the field of sound recording, the volume button is gray out and inactive. The turntable is the record - but it's a recording at a too low volume and I would like to increase the volume. But with the Volume key is inactive, I am unable to do so. How can I increase the volume of the sound recording if this button is disabled? Thanks in advnace for your answer.

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-GB

  See also:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Record of control of projects and costs are not visible when the project is created manually or copy model or another project

  
  Hi all

  If I create the project using business process 'Request for project' and when we opened the project, we can see "Project delivery" and "Cost control" mode records.

  But when I create project directly in the workspace of society (Admin mode) > company sponsored Shell > project, either by directly or copy model or another project.

  We are not able to see above two folders in user mode.

  I had checked to access control, there are access avalible for all project users to the two folder in user mode.

  Help, please.

  The project administrator mode.

  Implement > BPs

  Add in your Bps and enable and configure workflow settings.

  Glad that the other worked ok now.

  I hope this helps.

• Sound Recorder, Volume Control, and Word Pad is gone and is not found in entertainment accessories, etc.

  Original title: My Sound Recorder, Volume Contol and Word Pad is missing and cannot be found in entertainment accessories, etc. on my Windows XP computer. I finally got the rear volume but the sound recorder will not be installed from the original Windows XP cd.

  I finally got the rear volume but the sound recorder will not be installed from the original Windows XP cd using cmd or %systemroot%\system32\sndrec32.ex_%systemroot%\system32\sndrec.exe ideas would be appreciated.

  Hi nsuzann,

  1 have you made changes to your computer recently?

  2. are you all error codes or error messages?

  You can try the following steps and check if you can access Sound Recorder and WordPad.

  Method 1:

  a. go to C:\Windows\System32 and double-click sndrec32.exe and check

  If she opens the tape recorder, and then create a shortcut on the desktop

  b. right-click on sndrec32.exe and select send to desktop.

  Method 2:

  About lack of WordPad, try the following steps:

  Step 1:

  Try to launch WordPad into the run window and check.

  a. Click Start and select run

  b. type WordPad, and then click Ok

  Step 2:

  a. navigate to the following location:

  C:\Program Files\Windows NT\Accessoires

  b. right-click on wordpad.exe and create a shortcut on the desktop

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• FileInfo recording custom control panel is not new metadata

  I wrote a script to copy the text of a variable in a XMPTextInput or XMPTextArea field. Once compiled and opened as a FileInfo in Illustrator Panel, when I click the button, the text appears in the desired field. However, it is not saved when the window is closed. Does not work with or without the dispatchEvent code. I can find no online reference of the right way to call the event xmpWrite, so I copied this dispatchEvent to a panel of sample code.

  What's not?

  Thank you
  Alex

  < mx:Script >
  <! [CDATA]
  Import mx.controls.Text;
  public var textVariable:String = "test string" ;

  function copyText():void {kwArea.text = textVariable; dispatchEvent (XMPEvent (XMPEvent.XMP_WRITE)) ;}}
  []] >
  < / mx:Script >
  < fi: XMPFormItem
  "Label ="$$$ / xmp/sdk/custompanels/FileName/Panel/keywords = keywords:"
  "" < fi: XMPTextInput xmpPath = "Subproperty" xmpArray ="bag" id = "kwArea" / > "
  < / fi: XMPFormItem >
  < / fi: XMPForm >

  Hi Alex,

  1 give the area of the XMPTextInput an ID as id = "_dcSubject".

  2. instead of dispatchEvent (XMPEvent (XMPEvent.XMP_WRITE)); use

  _dcSubject.dispatchEvent (new Event (Event.CHANGE));

  Then the text entry field stores the value when the dialog box is closed.

  The reason is that XMP_WRITE causes controls to store their content when the content has been modified by user input.

  When you change the property 'text' programmatically, it is not "noticed".

  Hope this helps,

  -Stefan

• I received an email from Cricket showing my account telephone recording but I can't read it!

  I can't open a document sent to me of Cricket.  He also says that I have to fill in the information to update my account with Microsoft, which is a true statement?

  If they are looking for information of ID and password connection is a total scam. Just delete it.

• "Record" tripping on an external recorder with camera button?

  I recently bought a * E7 recorder, which I am generally very pleased, except for the fact that I do not seem to be able to trigger the recorder to record by pressing the "record button" on the camera when you send the signal via HDMI.

  Note: I'm NOT using the expansion unit

  I put "Rec trigger" for ' HDMI/SDI flag - Sony' on the recorder, and it allows me to trigger recording when sending a signal to SDI, but not yet with HDMI.

  And HDMI is the only way to send the signal to 4 k, so SDI is usually not an option.

  I'm guessing that it is related to a lack of the Extender?

  It is not the end of the world having to press "record" on the recorder itself, but a bit boring and cause anxiety.

  on your FS7 - make sure you have:

  under menu of video - output setting must be set to "recorder".

  under the recording menu - control SDI/HDMI set on "on".

  I also like to turn on the TC HDMI out of the TC/menu - so that my time code is the same for both internal & external recordings.

• Switch control Boolean to false automatically after a set time

  I'm trying to control when I register given by the presence of the user press a Boolean control on the front panel. I want the data to be saved for only 3 seconds and having the Boolean control automatically enabled to false so that the data will stop recording and control changes on the front but does not prevent the execution of the VI. The reason is that I want to have the user to create a settings file for a laser used outside of labview where entered the user through digital controls the current settings of laser and a wavelength of laser meter reading is found measured and saved in labview. So after that the data records for 3 seconds the user would input new parameters for the laser and then save the new configuration of the meter wavelength and repeat this operation several times.

  I tried a case hang as seen in the attached VI and you have also tried a state machine with control of ENUM. I can't get this thing to work. Any help would be appreciated.

  Thank you

  Hello

  Easier implementation is to have a state machine. You would have a State to collect data for a specific timer and another State to exit the VI.

• acquisition and recording of analog data with producer consumer model

  Someone on this forum, in a separate last week discussion, suggested that I use the producer model consumer data acq.  My ultimate goal is to acquire analog channels 1-4 continuous data, display graphical band style and save the data on the boot disk when the user presses the 'Start Saving' button (and will continue to display recorder cards).  Economy will stop when the user presses the button "Stop Saving" but strip map will continue to operate.

  My attempt to use the producer-consumer model is attached (LV 8.5 only).  It does not work.  I have not tried to implement for recording user controls - just trying to make simple continuous display and save (1 channel) at this stage, using this model.  VI runs, but the graphic Strip is never updated with the actual data, and the data file that is saved has zero byte inside.

  Thank you.

  WCR,

  Looked at your code, and you are right.  It won't work.

  Take a look at this example:

  http://decibel.NI.com/content/docs/doc-2431

  The VI of the acquisition must be inserted in the loop of the producer.  In addition, you must tell him how many samples for (otherwise, it will get 0).

• codec IDT high definition for record not available

  I just bought instant immersion Spanish. I can't have the microphone to record. When I go to the recording/sound/control panel, pane said micro Hi Definition codec is not available.

  How can I solve this problem. My computer is a HP P6-2330 with windows 8. Thank you

  Ok.

  Then install the IDT pilot through the HP Recovery Manager when you are connected to Windows or by the use of your set of recovery disks. You must choose the IDT audio driver instead of the driver selected in the image and then click on install.

  

• Editing an SPF record to remove worldsecuresystems as an mx:?

  How can I remove "mx: include:worldsecuresystems.com ' of my SPF record? I use GMail as my provider, and if I change the record or delete it and create a new "mx: include:worldsecuresystems.com ' is placed in the text.

  Anyone know why this might be?

  WorldSecureSystems is the name, not a mail Exchange Server.

  Thanks in advance!

  Scott

  I don't think your answer lies in the SPF record.

  An SPF record allows when the site is sending emails from [email protected] and your email is hosted externally in British Colombia. When the receiver yourdomain.com server sees coming email pretending to be [email protected] then likely most of the e-mail administrators who would consider as spam. However, most mail servers could have a quick look back at the announcement of DNS SPF and see recording settings control which is actually send it. If you include worldsecuresystems in your SPF then it tells the Mail server of reception that BC is correct to send emails.

  That's why the SPF record only really helps in certain circumstances generally only when sending e-mail to people 'in' the corporate network.

  So in your case play with the SPF has no effect. unless you 'perhaps' send loads of emails to people in society.

  You can start by analyzing email marketing report to see if you can find any common issues rebound. Also, try changing your email templates and check the contents. Also send a breath of comparison using Campaign Monitor. Also try a lipnus test and an analysis of spam test.

  Brett

• Request a new file name on the first record

  I have created a form with 15 pages. The user might want to fill the form multiple times with different content. So I'm looking for a solution where the user is asked to give a new name when he or she registers the PDF for the first time. If the original form of the void is still available for the next case.

  In Word , I would create a model, so a document created after this model has no name unless the user specifies one. That is when the user clicks the record button for the first time as he or she gets a save as dialog box.

  In Adobe, I have not found a similar thing. I tried to add a preSave event to the user asking if he or she wants to give a new name, but then the user will be asked each time to give a name, not just the first time. Maybe I could check the name of the file, but I wonder if there is a simpler solution.

  Any help is greatly appreciated.

  Why don you keep a record of control in a hidden text field?

  I modified your code a bit. (see the red lines)

  If it still does not, posting your form on this forum to have a peek.

  Nith

  ---------------------------------------------------

  ServiceProcurementNotice::docReady - (JavaScript, client)

  var

  myDoc = event.target;

  Var colors = true;

  Try

  {

  var userSave;

  If (saveFlag)

  {

  userSave = xfa.host.messageBox ("do you want to save changes to" + myDoc.documentFileName, "Save", 2, 3);

  }

  If (userSave is 3)

  {

  app.execMenuItem ("SaveAs");

  Colors = false;

  txtHiddenSaveFlag.rawValue = "false";       If you want to keep this info even after closing the form

  }

  on the other

  {

  }

  }

  catch

  (err) {app.alert ("Exception to save:" + err) ;}}

  If (userSave is 3)

  {

  app.execMenuItem ("SaveAs");

  Colors = false;

  txtHiddenSaveFlag.rawValue = "false";       If you want to keep this info even after closing the form

  }

  on the other

  {

  }

  }

  catch

  (err) {app.alert ("Exception to save:" + err) ;}}

  If (userSave is 3)

  {

  app.execMenuItem ("SaveAs");

  Colors = false;

  txtHiddenSaveFlag.rawValue = "false";       If you want to keep this info even after closing the form

  }

  on the other

  {

  }

  }

  catch

  (err) {app.alert ("Exception to save:" + err) ;}}

• J K L; And enter the key does not

  I have a Pavilion dv7-6b32us laptop.  Intel CORE i7.  Windows 7.  Nothing added, but the printer drivers and nothing lately.  Yesterday morning keyboard worked fine.  Last night the J K L; were not working.  Clean under the keys.  Then enter key does not.  Have reloaded drivers.  The Enter key on the numeric keypad works ok.  I plugged in a USB keyboard and everything works normally with him.  Any ideas?

  Hey ModernMode,

  That's the spirit! Silver linings FTW!

  You are right. You can replace the keyboard following the same guide who will also give you the part number because they keyboard so you can order it online.

  Alternatively, you can contact HP telephone Support to control the keyboard, or set up the service for them to fix it for you. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.

  Thank you for using the HP Forums!

• Impossible to activate the external Microphone on my Satellite

  I try to install and a microphone outer helmet using the front catch, but the computer won't recognize it.
  I tried to enable it, but when I followed the instructions to activate the speakers only LINE IN coming.

  Hello

  Could you please after some info on your laptop model?
  What laptop Satellite you have exactly?

  With regard to the external microphone:
  Please connect the microphone to the mic jack on your laptop.
  Then go to control panel-> sound-> recording tab control

  Check here if the external microphone is available. If so, set as default device.

• Qosmio G20: could not save due to a problem of unknown calendar

  Try to record off the TV and have done several times in the past. But today, he had the error message came up saying I couldn't record because of a problem of unknown timing, and yet I can clearly see the TV and can change channels.

  I tried to record manually and in the guide, but no luck, same error message. I also tried to record via control of media down Center and it came with a recording conflict, indicating that another program may be trying to save. I never had this problem before. FYI, I record on a Qosmio G20 via a Virgin Media box.

  Hello

  It seems that this error message appears if you try to manually record a program on a channel of the Advanced Television Systems Committee (ATSC) or / and the channel is not listed in the Program Guide.
  Microsoft has released a useful knowledge base article that could help solve this problem;
  Check this box:

  + You receive a "the recording could not be scheduled for an unknown reason" error message in Windows XP Media Center Edition 2005 +.
  http://support.Microsoft.com/kb/909969

  + Recording could not be scheduled for an unknown reason"Error Message When you try to update a series that has been marked for recording.
  http://support.Microsoft.com/kb/812902

  Concerning