Qosmio G20: could not save due to a problem of unknown calendar

Similar Questions

• JBOD Qosmio G20 - could not initialize the disk of 320 GB - 1RAID-0

  Hello, comrades Toshiba users,
  at first, I apologize if this question has already been answered, but I did not find the answer to my problem.

  One of my colleagues has a Toshiba Qosmio G20 with two 80 GB drives. Big 17-inch "surf-board-sized" computers laptops are not my cup of tea, but the Qosmio him quite well served.
  We tried to upgrade the two hard drives of aging in his laptop. With considerable experience in replacing the readers of the laptop, I didn't expect no particular surprise, but I was wrong.

  We tried to replace the original disks
  Bay 1: 80 GB Fujitsu drive, System
  2: 80 GB Fujitsu drive, data, RAID off the coast of the Bay

  with the new
  Bay 1: 320 GB WD Scorpio
  WD Scorpio 2: 320 GB drive Bay.

  The BIOS of the G20 is v1.30, the latest version. It recognizes new readers-, but one of the new marking as 1RAID-0 disks fails. After trying to "initialize" the 320 GB drive in bay 1 as 1RAID-0, on the third page of the G20 of BIOS, there is a disk activity, but the drive remains in JBOD mode.

  Unable to mark the drive of 320 GB 1RAID-0, I am unable to use the 320 GB drive as a system disk.

  If the original system drive is cloned on a new 320 GB drive, that it does not start. Starting XP * begins * but subsequently fails with STOP 0x7B - in other words, the infamous blue screen INACCESSIBLE_BOOT_DEVICE when the Toshiba RAID driver is loaded during Windows startup.
  Plain vanilla CD, of course with slipstreamed windows installation driver Toshiba, impossible rest. Installing Windows don't "see" drive in Bay 2.

  When the drive system is put in the high Bay and G20 is started from it, Windows XP starts correctly. The drive in Bay 1 is accessable from Windows, however, remains offline in the RAID from Toshiba console. If the start player in Bay 2 is not an option, too.

  A similar problem, where the owner could not install a system of 200 GB drive is described here
  Link: http://tinyurl.com/38wokw
  The owner, however managed to install a 100 GB drive and we have resorted to 80 GB of disk as a system disk and the only player upgrade in Bay 2 to 320 GB.

  I understand what happens when the disk is 'initialized' in the BIOS. Only brands of BIOS of Toshiba disk 1RAID-0, and it breaks down on 320 GB drive. I will refrain from expressing my opinion on this practice.

  My question is - if it is possible, how * manually * mark the drive of 320 GB 1RAID-0?
  Using a hex editor, dd or something similar is no problem. A partial answer would also know the disc more large size which * can * be marked with success under the name of 1RAID-0 at BIOS G20.

  Thanks in advance.

  Hello

  I m not 100% sure, what could be wrong by presumably 320 HARD drive size might be too big!
  How about the 100 GB or 120 GB hard drives?

  I think you should consider it because usually most of the BIOS supports a HARD drive size limitation and therefore not all sizes are supported.

  But note; using the configuration of 1RAID-0 (striping), met by the operating system size is twice more only if the smaller of the two HARD drives in RAID configuration. Using RAID-0, all data on both disks will be lost, even if it is training of two disks fails.

• Qosmio G20 - could not get the video to display on the LCD screen

  I have a laptop Toshiba Qosmio G20, running Windows XP MCE.

  The DVD player on board isn't sounds very well so I thought I would plug an external DVD drive to expand its use. After a lot of internet research, I finally found how to do this. Here's my setup.

  Using the monitor port I used the adapter 3 RCA jacks. (There is no S-video on the DVD drive and an adapter did not work). I finally discovered that in order to get the image on the screen, I have to use Fn + 4. Now, here's where I'm having the problem. I can't get the video to display on my external LCD. FN + 5 didn't do. The monitor is an I - inc AH191D and is connected by VGA cable. There is no driver other than the one for the VISTA operating system... That is why it is not anywhere in the Device Manager.
  Here are the settings I use in order to have all that shows on my desk, shows on the monitor.

  In Control Panel open to the screen. Properties
  Number chosen 1 - multiple monitors GeForce Go6600 video card...
  Advanced under
  the GeForce G06600 tab,
  nViewDisplay Mode: clone 1 a 1 b
  The main screen: digital flat screen
  Secondary display: AH191

  I also tried using the properties of controls on Toshiba. He says under TV output TV output but gives options of the program, but I don't know what I would use. Any ideas out there?

  Wait I'm confused, if you try to send the output of your external DVD drive in the laptop, and then display the image on an external monitor attached to laptop?

  If you use the DVD player on your laptop, it will be good quality S-video as a signal of low resolution.

  Is there something wrong with the DVD player?

  If it's just the DVD software you don't like, you can download other DVD players. PowerDVD is excellent, its better than WinDVD and other players in my opinion.

• My computer refuses to update Virus and spyware definitions & = "Could not connect" due to a problem of network connectivity or Internet... End.

  Been scratching my head over this, someone help...?  In a simple Street... conversation?  Cheers :-) John

  Hello

  Which may be a sign that malware has been somehow installed on your computer, if you have problems using and update your security programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#winxo

  Windows XP

  Using the F8 method:

  1. Restart your computer.
  2. When the machine starts first, yet once it will list usually some equipment that is installed on your machine, amount of memory, hard drives installed etc. At this point you should tap the F8 key repeatedly until you are presented with a menu of Advanced Options in Windows XP.
  3. Select the Safe Mode with networking option using the arrow keys.
  4. Then press enter on your keyboard to boot mode safe mode with networking.
  5. Make all the necessary tasks and when finished restart to start in normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• VISTA: backup application could not start due to an internal error: (0 x 80080005) Server execution failed

  The backup application could not start due to an internal error:
  Server execution failed (0 x 80080005)

  Vista Ultimate - trying to COMPLETE the backup of a computer

  Hi people,

  I had a similar problem with Vista (64-bit edition complete edition) machine. I run automatic backups for more than a year. Suddenly, backups started fail with the following error code:

  "The file or directory is corrupted and unreadable 0 x 80070570.

  I thought it would be my external drive - so I tried an another one - same error. After a search of different topics around, I tried various fixes (similar to above), but none of them worked.

  I managed to find the problem though. The issue is not with the drive being written - it's the current backup disc that is the problem. If you want to save your primary drive (C:, for example), try to perform a check of the errors on this drive (right click on your drive home, you are trying to save, choose 'Properties' then go to 'tools' - click 'Check now' under the control of errors - and check both boxes). Since this is the current drive, you must stop and restart - the system then automatically checks the system files and windows files on the next boot.

  After doing this, my problem cleared up. Apparently, the backup software was crashing trying to read a corrupted file or a sector of the hard disk, that he was backing.

• HP 4620: HP 4620 scans very well, but could not save the analysis in a file

  The scanner scans very well, but could not save the analysis in a file. Whenever I try to save, it crashes.

  Hey @motikama,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems with the scanning of your Officejet 4620 e-all-in-one for your Windows 7 PC. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Uninstall all software associated with the printer to your computer.
  2. Restart your PC.
  3. Download and install the latest drivers by clicking on this link.

  Please let me know the results after following the above. If you can scan, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Failure of the Time machine backup could not save "My Passport"

  When I try to do a backup on my Passport using Time Machine, he used to work over the years, and now it is the message I get:

  Failure of the Time machine backup could not save "My Passport"

  
  

  Does anyone has an idea to help me with this problem?

  
  

  (Sorry for my English but I speak French in Switzerland...)
  

  Have you tried to run utilities disk to check/repair the external hard drive? Here is something you can try.  http://pondini.org/TM/A4.html

• HP Photosmart Premium C410b: could not save the scanned images

  I use the HP Scan application and the error message: -.

  Could not save the scanned images

  appears when you try to save in a folder as a PDF or any other format.

  Ironically, if I'm going by sending to the printer and then save to PDF it works!

  I checked and I'm using 4.2.2 with El Capitan HP driver software

  Any thoughts?

  Hello

  The application from HP for your printer is not compatible with El Capitan, so the output files incorrectly recorded.

  In the Hewlett-Packard folder move HP Scan to the trash and empty it.

  Before you install and use the HP Easy Scan application below which should save the files correctly:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Kind regards

  Shlomi

• After you have installed microsoft lifecam HD - 6000 PC with OS Windows XP3, message as "lifecam could not save you photo, audio or video clips" s ' Please help

  After you have installed microsoft lifecam HD - 6000 PC with OS Windows XP3, message as "lifecam could not save you photo, audio or video clips" s ' Please help

  Prasanna Kumar Mishra

  Hi Prasanna Kumar Mishra,

  You did it happen any changes made to the computer before the show?

  You can try the steps from the following links and see if that helps:

  Troubleshoot failures to find the new LifeCam hardware
  http://support.Microsoft.com/kb/929087

  The problems of compatibility between LifeCam and other programs
  http://support.Microsoft.com/kb/953692

• LifeCam does not work, get a LifeCam error could not save your, photo, audio clip or video clip

  Just got a LifeCam Cinema.

  Installed the drivers-software, plugged the cam, noticed drivers installed.
  Tested by opening the installed LifeCam software. Describes the options to take photo, audio or video. "Or the other option does appear immediately the error" LifeCam could not save your, photo, audio clip or video clip.

  Shows Device Manager is installed correctly.
  Swapping the same USB ports it shows in the software, no device detected, a driver is re-installed during the exchange of the ports, it comes up with the 3 options mentioned before and again the same error message.

  Have also tried Google chat and shows no video, but gives the possibility to do video chats.

  System: Windows 7 64-bit.
  I have full admin rights on the system...

  Christophe ideas?

  Hello Striff,

  If the camera is not detected, it seems to me that the drivers are not installed for the device works, I suggest you reinstall the Lifecam drivers and check if you have the same problem.

  I suggest that you try different methods listed in the following article to resolve this problem:

  Troubleshoot failures to find the new LifeCam hardware:

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Lightroom could not save the catalog

  I get the following error when trying to save my catalog:

  Lightroom could not save the name of the catalog 'Catalogue Lightroom'.

  I use Lightroom CC 2015.5

  I have over 300 GB of free space on my drive.  I have more than 3 GB of photos.

  Backup follows these steps before the failure:

  Integrity checking,

  Copy of catalog

  Catalog optimization

  The Catalog backup compression

  
  

  Any ideas on what to do next?

  I had a chat with Adobe session live support.  She has tried everything that you guys recommended then asked me to delete a bunch of files on my C drive because it was pretty full.  She said that this drive should be at least 2 x the size of the free catalog.  Once I cleaned stuff backup succeeded.  Thank you all.

• First could not start due to 0xc000001d

  Hello everybdy! After several days of testing to start my first cc2015 pro after installing the update, I decided to install a new 7 W fresh on a new hard drive with a new video card. When I started the new first installed, downloaded from the cloud, I had the same problems as before. First could not start due to 0xc000001d. New diver of the video card and all updates for windows have been installed. I think that now, Adobe must act immediately to solve this problem and give us something to absurd work days and destroy a system that works perfectly.

  Hi GernotS,

  For a fix, update for first Pro CC 2015 (9.2).

  Thank you

  Kevin

• just upgraded to Imac 27 "5K, installed the Software Photoshop cs4, then saving files get 'could not save file currently in use or is still open' how can I remedy?

  just upgraded to Imac 27 "5K, installed the Software Photoshop cs4, then saving files get 'could not save file currently in use or is still open' how can I remedy?

  Check this message: Re: "cannot save (file name) because the file is already in use or left pending."

• Impossible to launch the store "we were not able to connect to the store.this could not have due server problem or the network connection has expired.

  Original title: PROBLEM WITH WINDOWS STORE

  Hi, I'm a first year student at IIT MADRAS. I just got a new laptop (W8, 4 GB RAM, 320 to drive HARD, I3). I had problems to open the store. He said: "we were not able to connect to the store.this could not have come because of problem with the server or the network connection timed out." My connection to the local network requires the proxy settings. PLEASE HELP ME.

  Hello

  Yes, the speed and connectivity of the internet must be consistent for the applications to work properly.

  I suggest you create a new user account and checkif the problem persists.

  Create a new user account.

  Setting up a new user account is a very easy process in Windows 8. There are two types of user accounts, a Microsoft user account and a Local user account. See this link for more information on the two types of user accounts and how to create them.

  http://Windows.Microsoft.com/en-us/Windows-8/create-user-account

  Try to connect with the user account that is having right of the administrator and check if the problem persists.

  I hope this helps. If you have any other questions, please get back to us and we would be happy to help you.

• Adobe Reader does not open due to a problem - Mac, not PC

  "Adobe Reader does not open due to a problem.

  Check with the developer to make sure that Adobe Reader works with this version of Mac OS X. You may need to reinstall the application. Don't forget to install the updates that are available for the application and OS X.

  Click report to display more detailed information and send a report to Apple. »

  ------------------------------------------------------------------------------------------ ----

  20/09/2014: had the Mavericks for ~ 1 month. Acrobat Reader from Adobe work very well.

  OS X Got notice of Acrobat update 10.9.4. I did and it could not be updated and got the above message! V. 10.1.12. I searched and found Acrobat v. 11.0.07, I trashed/uninstalled Adobe Reader 10. app & also trashed; Adobe Acrobat.com.app folder.

  I D/L new software Adobe Acrobat Reader v. 11.0.07. It worked fine!

  Then I upgraded OS X in v. 10.9.5. new software Adobe Acrobat Reader v. 11.0.07. Always worked well!  Hours later, he failed to start with the error message above again!

  (Crash newspapers available if necessary to solve this problem)

  Now using Mac preview to open PDF files.

  BTW, I clicked on 'get Info' on the reader app & see that a box has been ticked "open in 32-bit mode". Given that my Mac is 64-bit, I unchecked that box & tried again launch & same exact error.

  Thank you!

  Hi Iconoclastmac,

  Please try unistalling Adobe Reader and system cleaning by the following steps:

  1. go to/Applications/Adobe Reader.app. Drag and drop this app in the trash.

  2. go to the Internet plug-ins present in the System/Library/Internet Plug-Ins library - / and put the following in the Trash:

  (a) / Library/Internet Plug-Ins/AdobePDFViewer.plugin

  (b) / Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin

  3. go to/Library/Application Support / Adobe and move the following files to the Trash:

  (a) / Library/Application Support/Adobe/Reader

  (b) / Library/Application Support/Adobe/HelpCfg

  4. go to /Library/Preferences/com.adobe.acrobat.pdfviewer.plist and place this plist in the trash.

  Restart your Mac.Try install Adobe Reader ftp://ftp.adobe.com/pub/adobe/reader/mac/11.x/11.0.09/en_US/AdbeRdr11009_en_US.dmg 11.0.09