temp\7f1b_apopcompat.txt

When I'm on Facebook and close happens debug, send error report or don't send.  This also occurs on other sites.  He closes the tab and reopen.  Example pages like recipes, farmers Almanac, yahoo and other games.

Advertisement

Hi Telrob,

·         You use Internet Explorer? If yes what version do you use?

·         Did you do changes on the computer before the show?

If you are using Internet Explorer, follow these methods.

Method 1: Follow the steps in the article.

Why a few blank pages or incorrectly displayed in Internet Explorer?

http://Windows.Microsoft.com/en-us/Windows7/webpages-look-incorrect-in-Internet-Explorer

Can't access some Web sites in Internet Explorer

http://support.Microsoft.com/kb/967897

Method 2: Perform an optimization of Internet Explorer on the computer of the article.

How to optimize Internet Explorer

http://support.Microsoft.com/kb/936213/ro

Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

Tags: Windows

Similar Questions

  • fragmented files Documents and Settings\User1\Local Settings\Temp\toolbar_log.txt

    I'm going to defragment the cause there are a lot of red and gives files thinking about the computer. There are still two blocks red af after defragmentation. We have 709 fragmented files. the only thing he tells me is to defragment again. This is a sound block saying me the corresponding problem. Documents and Settings\User1\Local Settings\Temp\toolbar_log.txt

    Hi Jason,

    1. to confirm, do you use the Windows XP operating system?

    2. do you get an error message? If Yes, what is the full error message?

    It seems that we have to clean the unnecessary files and check if the drive works properly or not.

    I suggest you perform the steps.

    Method 1: Use the Disk Cleanup tool and check if that helps you.

    See also:

    How to automate the disk cleanup tool in Windows XP

    Rerun defragment and check.

    Method 2:

    Alternatively, you can scan the hard disk for errors. You may need to run the scan several times and make sure that the disc is clean.

    Reference:

    How to perform disk error checking in Windows XP

    Chkdsk

    You can opt chkdsk/r

    Note: He performs a comprehensive check, even if the drive is not marked for chkdsk to run. This parameter is none of the changes on the disk.

    Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    Once you have finished the cleaning disc and chkdsk, you can perform defragment to see if it solved the problem.

    Hope this information helps. Response with status so that we can help you.

  • How to fix thisand related errors C:\DOCUME~1\Scott\LOCALS~1\Temp\8e91_appcompat.txt

    When I open my file to load down, either online or offline file freezes the pc and I get this message

    C:\DOCUME~1\Scott\LOCALS~1\Temp\8e91_appcompat.txt I have down loaded a fix? and may have gotten a similar message-

    Hello scottmc ny,.

    What version of Windows XP and service pack are you running?  You only an error when you access your download folder or this happens with other folders?  If the system works, what do you think might have changed since the last time it did not work properly?

    Little matter that you use for malware protection, that

    Download, install, update and do a full scan with these free malware detection programs at:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    Restart your computer and solve the outstanding issues.
  • C:\DOCUME~1\Fery\LOCALS~1\Temp\13b_appcompat.txt - Este Acesta message care imi apare cand pornesc jocul Age of Empires 2. This his college ca trebuie sa-mi porneasca jocul?

    C:\DOCUME~1\Fery\LOCALS~1\Temp\13b_appcompat.txt - Este Acesta message eroare care imi apare cand pornesc jocul Age of Empires 2. This his college ca trebuie sa-mi porneasca jocul?

    Hi feryco66,
     

    Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

    http://support.Microsoft.com/common/international.aspx

    Thank you

  • There was a problem starting: c:\user\username\appdata\local\temp\80980150.txt

    original title: Windows error that has annoyed me for a while.

    There was a problem starting

    c:\user\username\appdata\local\temp\80980150.txt

    The specified module could not be found.

    This is the error I get whenever I boot windows and I think it may be related to a problem I was. Most of my prefrences recorded for windows is not in working condition (as my taskbar is not able to change the settings). I have scowered the interwebs for a response, even using Google and even * shudder * Bing. My Riddle has baffled many, can someone help out me?

    I have consulted the temp folder and this particular text file is not present. Maybe if I create a new one, it will work? I'm not to try it again, but if someone could confirm that I would be much happier!

    I don't know any reason that Windows must be looking for a text file to start.  You can create a file in this location, but I think it would be better to use the free Windows Sysinternals Autoruns tool to find and remove the reference to the file.

    For more information on how to use the Autoruns, please see:

    Autoruns for Windows v10.01 Windows Sysinternals Autoruns Forum
    Advanced Malware cleaning

    Boulder computer Maven
    Most Microsoft Valuable Professional

  • Error message with nwiz.exe [mod nview.dll AppVer 6.13.10.3190 name] C:DOCUME~1\ADMINI~1\LOCALS~1\Temp\bdec_appcompat.txt

    Windows XP Pro, crashed, took shop, had to be wiped (cleared all updates for several years). Reloaded from the original disks. Added a few other updates since then. When turned on, get the error message and Web site NVIDIA Graphics Driver. I have download long, then a message that it's not compatible with my hardware. Why I get this now? It works, but I get this message every time I turn it on.

    Hello karenfedway,

    Thank you for visiting the Microsoft answers community.

    Try to uninstall then reinstall the Nvidia software.

    First of all, make sure you know material real th so that you can download the drivers and the correct software.

    -Click Start > Control Panel > Add Remove programs
    -Uninstall any software related to Nvidia

    Rebooting and using the Nvidia software for your hardware reinstall.

    Hope this helps

    Chris.H
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • In auto Acrobat Edition creates the Temp file on hard drive

    As soon as I click the button Edit in any PDF document, to add a watermark or set passwords security for example, a temporary file is created on my Macintosh HD.

    The name of the file is C/\temp\dump.txt

    The text file lists only:

    INFORMATION IN THE TABLE:

    =====================

    Total of tables found: 0

    I do more editing, more information is repeated.

    Why is - even appear and how do I get rid of him. I have to constantly drag to the trash to get rid of them.

    Hello Useplanb,

    We have released a patch that fixes the bug of creating Temp file. If you're not already updated to the latest patch, simply open Acrobat and visit help > check for updates to apply this hotfix.

    More details about this release and bug fixes is available here: help Acrobat | Release notes | DC Acrobat, Acrobat Reader DC | Update

    Please give it a try and let us know.

    Thank you

    -ashu

  • New Qosmio G30 hangs after some time by doing nothing about it

    Hello

    I'm a software engineer. It means that I know only a few things on computers. But this new Qosmio makes me unhappy because I see no chance to let it run stable. I got this phone about 2 weeks. This week * the system crashed about 10 to 15 times *. Is the horrible thing, I can't do anything else than * holding down the power button for 10 seconds to restart this machine *.
    Original Vista Ultimate is installed. External devices, or USB mouse. I changed the power "always being run" mode to be sure that the effect is not any energy saving mode. I have updated all the drivers to the latest version. But with the same effect.
    I really need to start working with this computer, but I can't trust him at this time. I need help as soon as possible!

    In this case, I downloaded the information system on this site:
    Link: [www.goldengel.ch/temp/SystemInfo.txt]

    Concerning
    Timo

    _Basics are: _
    Vista Ultimate 6.0.6000 Build 6000 (updates made)
    BIOS 3.90
    QOSMIO G30
    CPU: Intel Core T7400 2.16 GHz, 2 Kern, 2 logical processors
    SMBIOS 2.4
    RAM: 2 GB
    HDD1: Vista OS installed and multimedia files
    HDD2: Program files, Temp and Installation files.

    Hi dude

    It's not easy to say why the laptop s OS crashes.
    It is maybe something wrong with the s operating system installed?  :| who knows.

    I think you should install the OS preinstalled Toshiba and it should test then

    If the laptop still crashes the single RAM modules need to be tested.
    I think you could blow an and could test the laptop using a single module of RAM.

    Good luck

  • How to enter spaces in the path BACK names using cmd via call executables

    TestStand 4.1 use called executable to call cmd with the expression of argument (slightly modified)

    "Atprogram/c...--verifier f C:\\test\\my folder\\map.hex > C:\\TEMP\\result.txt.

    I can't use quotes more around 'my folder' and my ^ folder is not accepted by atprogram.

    See you soon,.

    Hello

    To enter a "in the arguments text box you must enter------" instead:

    your string should look like this:

    "" / C atprogram--verify f \"C:\\test\\my folder\\map.hex\ ' > C:\\TEMP\\result.txt.

    Hope that helps

    Jürgen

  • Dumping Variables in the text file, separate from the TS report

    Hi all

    I know that I can probably do this in TestStand using LabView, however, which is not a luxury that I have.

    What I'm trying to do is, when a failure occurs, empty a specific set of information in a separate (probably text file) log file share the standard test report.  For example, I could be followed by some tampons or test State of the equipment in stationglobals, when a test fails, I want to empty the part of the overall station in a different newspaper, once again, apart from test report, is it possible?

    Looks like the closest thing to research through TS and the support forums, I found is to use ActiveX calls to maybe MS Word or Excel and generate something there?  I was expecting something a little simpler?

    Kind regards

    Mike

    Hi Mike,.

    Try this:

    Write, method

    Syntax

    PropertyObject. Write (pathchaine, objectName, RWoptions)

    Goal

    Writes the content of an object in the file specified by pathchaine and associate it with the name specified by ObjectName with the object in the file.

    Remarks

    If you call this method on an object alias, TestStand generates the stream using the object to which the alias refers. This method does not include the Subproperty alias objects in the stream. See IsAliasObject for more information on the alias objects.

    Parameters

    pathchaine String

    [In] Pass the path of the file to which to write the data of the object.

    objectName String

    [In] Pass the name to associate with the object.

    RWoptions Both

    [In] Pass 0 to specify the default behavior, or pass one or more constants of ReadWriteOptions . Use the bitwise OR operator to specify multiple read/write options.

    For example, to make a statement in a sequence with local variables, and run:

    Locals.Write (C:\\temp\\Locals.txt","Locals",0" ")

    This will generate a text file containing the values of the local variables. You can use it on any object, but you will probably need to ask with the options to get what you want.

    I hope this helps.

    -Jack

  • System Center Orchestrator 2012 R2 + Powershell module

    Hello

    I'm new here and just start using System Center Orchestrator 2012 R2.

    I created a file to play a Powershell Script that imports a module.

    The PS module has been deployed to all servers in folders.

    Executing files, it can't... I founf out that the new PS module is not imported through the host of orchestrator runs the script.

    to debug, I have performed in a test files:

    Get-module-list | out-file c:\temp\modules.txt

    and the new PS module is not listed in the file put out!

    I need to reboot servers in folders (or services) to get the new module PS imported successfully?

    Thanks a lot guys.

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • At run time, detect how program has Ran (upon request against user)

    Hello

    I am writing a LabWindows program that backs up data. I'll add this to my scheduled Windows tasks, but I also want that it is able to detect if someone is trying to manually run it and open an "administration panel".

    Yes, is there a way direct to detect how the file was run, whether on demand or run manually?

    Or y at - it a way to feed my program a '1' for him asking if it was run by a batch file and if it detects not only '1' then he opens the administration panel? I assume that if he is not the direct route, I would create a scheduled task that runs a batch file, put a '1' in a text file, and then runs the program. Then the program automatically checks in the race so that '1' is there...? After the program is run, the '1' is deleted again.

    Thanks in advance!

    Turbo

    Turbo:

    One way to do would be to use a command line parameter.

    When you configure the scheduled task, pass a command line parameter, for example / Quiet, to notify your program to run without the administration panel.  You can add a parameter of the command line simply by going to the list of scheduled task, right click on your task, selecting Properties and adding the parameter of the command line after the name of the exe file (separated by a space).  When a user executes it interactively, for example from a shortcut on the desktop or in the start menu, they don't use the command line parameter so the program does not work in silent mode.

    Read the command line like this:

    #include
    #include
    int main (int argc, char * argv [])
    {
    int i;
    int quiet = 0;
    for (i = 1; i
    print the parameters only if/quiet is not passed
    If (stricmp (argv [i] "/ Quiet") == 0)
    quiet = 1;
      
    If (! quiet)
    {
    printf ("number of command line parameters: %d\n", argc);
    printf("Parameters:\n");
    for (i = 0; i
    printf ("%s\n", argv [i]);
    printf ("Press any key to continue...\n");
    GetKey();
    }
    return 0;
    }

    The disadvantage of this method is that if they are running the program in the list of scheduled task, it will run in silent mode.

    Another thing you could try is to use schtasks.exe, which comes with Windows XP, for a list of scheduled tasks, is your task in the list, check what time it is planned to execute, display time and assume that the task runs as scheduled and not manually, if present is in a short time of the scheduled time.

    Use the system() function to run schtasks.exe, save the output in a file, and then open the file and read it.

    System ("cmd.exe /c schtasks.exe/query /fo list > c:\\temp\\tasklist.txt");

    Using the format option of list for a schtasks query, you would look first for the TaskName, then for the next run time.

    To see the command line options for querying tasks scheduled by using schtasks.exe, type the following command line:

    schtasks/query /?

  • I can not load forgotten that an error message appears

    C:\DOCUME~1\COMPAQ~1\Locals~1\Temp\c367_appcompat.txt that's my error report. When I try to load forgotten that an error message appears and the wont let me play. and it does on my build for forgotten also. all my other games just not work it and I installed the latest version of directx and still no access. Please help me I miss my game

    -------------------

  • Get the erro 0xc000005 code during installation of World of Warcraft

    I keep trying to install 2 WoW and get an error to the same installation point. I get an error 0xc000005 code and it says the files included in the report are Temp/fe01_accompat.txt.  I installed this game before but had a virus so I reformatted and am trying to reinstall all my previous software. any help would be appreciated.

    version-windows xp home edition
    CU - amd phenom II x 3 710 triple core
    Card EVGA geforce 9500gt 1 GB pci-e video
    RAM - 3 GB pc6400 ddr2

    What is in the text file? That could help.

    You can try a few things

    (1) running WoW repair tool
    (2) reinstall the drivers of your graphics (which means uninstalling the software and drivers that exist and then installing the new on the NVidia site - some said it worked)
    (3) to make a diagnosis of memory
    (4) try to clean the registry (I recommend CCleaner - some people claim it worked too)

    Sources:
    http://www.improve-PC-Tools.com/index.php/how-to-fix-0xc0000005-error-and-stop-it-forever/
    http://forums.worldofwarcraft.com/thread.html?TopicId=16473624892&SID=1

  • Pandor re installation of error report box

    Box Pandor, uninstalled it and now try to reinstall it brings up an error report.
    The following files will be included in this error report:
    Module 1
    EBUS.exe
    Image Base: 0 x 0400000 Image Size: 0x00000000
    Sum: 0 x 00000000 timestamp: 0x399db6cf
    Version information

    ...\LOCALS1\Temp\9cad_appcompat.txt

    WHAT HAVE I DONE?

    Hello Gumnut
    Please write to the Microsoft Forums.

    To help you better, please answer this question.
    1 do you mean Pandor's box or it's Pandora's box.
     
    (A). you can try to use the Windows Install Cleanup to remove remnants of installations failed, below.
    Description of the Windows Installer Cleanup utility
    A link to the below information and to download:
    http://support.Microsoft.com/kb/290301
     
    When you are working on your computer and install a new program, the installation suddenly fails. Now, you're left with a partly installed program. You try to install the program again, but you're unsuccessful. Or, maybe you have problems trying to remove an old program because the installation files are damaged.

    Do not worry. Windows Installer Cleanup Utility may be able to help. You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer Cleanup Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.

    B. now try to install Pandora's box and see if that fixes the problem.

    It may be useful
    Thanks and greetings
    Support Microsoft-dieng
    Visit our Microsoft answers feedback Forum and let us know what you think
    http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

Maybe you are looking for