Similar Questions

• Problem with Oracle fail safe 4.1.1 on W2k8 R2 Cluster Failover and Oracle 11.2.0.4 database

  Hi all

  I'm doing some tests on a Windows 2008 (64-bit) R2 two-node failover Cluster.

  I installed and configured successfully bone and the Failover Cluster feature.

  So I followed Oracle Doc-ID 1916391.1 to perform the installation and configuration of Oracle 11.2.0.4 database and Oracle Fail Safe 4.1.1

  After a successful (via Fail Safe Manager) validation of cluster and group, now I'm trying to validate the stand-alone database, but I'm stuck with this error (output in verbose mode of PowerShell):

  PS C:\Users\demo > Test-OracleClusterAvailableDatabase TESTDB - SysPwd (Read-Host-AsSecureString-Prompt "SYS Password ')-verbose

  SYS password: *.

  DETAILES: FS-10915: NODE1: from verification of autonomous resources TESTDB

  DETAILES: FS-10371: NODE1: run the initialization processing

  DETAILES: FS-10371: NODE2: run the initialization processing

  DETAILES: FS-10372: NODE1: resource owner information collection

  DETAILES: FS-10372: NODE2: resource owner information collection

  DETAILES: FS-10373: NODE1: determine the owner of the TESTDB resource node

  DETAILES: FS-10374: NODE1: collection of cluster information required to perform the specified operation

  DETAILES: FS-10374: NODE2: collection of cluster information required to perform the specified operation

  DETAILES: FS-10375: NODE1: analysis of the cluster information required to perform the specified operation

  DETAILES: FS-10378: NODE1: preparation for the configuration of resource TESTDB

  TH: FS-10349: database TESTDB instance is not alive. You want to stop and restart the database instance?

  Confirmation

  Operation does?

  Running dell' operation sulla "Test-OracleClusterAvailableDatabase' likelihood 'TESTDB '.

  [S] Sì Sì [T] a [N] no [U] tutti a tutti [O] Sospendi [?] Guida (he valore predefinito e "S"):

  DETAILES: FS-10350: from the TESTDB database

  Test-OracleClusterAvailableDatabase: OCIEnvNlsCreate failed

  
  

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Test-OracleClusterAvailableDatabase: FS-10999: an internal programming error

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Test-OracleClusterAvailableDatabase: FS-10160: impossible to verify the Oracle of standalone TESTDB database

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Test-OracleClusterAvailableDatabase: FS-10818: provider of resources of the database Oracle failed in preparing for

  treatment for TESTDB resource configuration

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Test-OracleClusterAvailableDatabase: FS-10890: Oracle Services for MSCS failed during the verifyStandalone operation

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Attached is the log of the OFS Cluster Dump (no error in my opinion).

  I surfed around but I can't find anything to solve the problem.

  I think something about the language of the (Italian) OS and Oracle NLS settings (AMERICAN. AMERICA), but obviolsly I'm not sure about this.

  Thanks in advance for any suggestion,

  Alessandro

  Message modificato da 1d457339-524e-4aa5-94aa-fd7d1ae98732 updated: attached is also output trace of the fss.

  Hello Alessandro.

  Solution to the issue is:

  Patch 20744940: 4.1.1.1: ORACLE FAIL SAFE VERSION 4.1.1 PATCH SET 1

• difference between oracle clusterware and oracle database

  What is the difference between the oracle database and oracle clusterware?
  
  Thanks in advance

  Oracle clusterware manages cluster resources for example databases and the pile of entire cluster, nodes, interconnection...
  Oracle database is a DBMS which manages the application data

• How to reconnect the new database with oracle and oracle mid infrastructure

  course oracle environment;
  Database; 10gr 2 (10.2.0.1) old-SID: gtxprod host: 10.30.100.199
  new database; 10gr 2 (10.2.0.1) - SID: gtxprod2 host: 10.40.110.199
  application sever. 10.2.0.1 (oracle mid level.) and oracle infra SSO, forms, reports, portal.
  
  problem;
  I try to reconnect from the application to the new database server. I do not know how?
  
  I went to /opt/oracle/10ggtxinf/network/admin/tnsnames.ora

  # tnsnames.ora Network Configuration File: /opt/oracle/10gasr2inf/network/admin/tnsnames.ora
  # Generated by Oracle configuration tools.
  
  asdb.gtx.com =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = isdev.gtx.com)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME =asdb.gtx.com)
      )
    )
  
  
  gtxprod.gtx.com =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = gtxprod.gtx.com)(PORT = 1521))
      )
      (CONNECT_DATA =
        (SID = gtxprod)
      )
    )
  
  gtxprod2.gtx.com =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = gtxprod2.gtx.com)(PORT = 1521))
      )
      (CONNECT_DATA =
        (SID = gtxprod2)
      )
    )

  In application of the oracle infra. How Asian Bank of development of database instance can connected with the new data base gtxprod2?
  
  In Forms Server, based on a Web site, if go to Forms Server, I can see tns.ora but I can't see anything to update to the new database.
  
  you could give me information how understand this problem?
  
  Thank you very much in advance

  Hi Wen,

  As you have created a new database 'gtxprod2' so the Stanley database should be in place
  cmd--> lsnrctl status
  That you have even made changes to 10ggtxinf/network/admin/tnsnames.ora
  do the same entry in the oraclebi/network/admin/tnsname.ora file

  You can check if your new entry is rite of
  tnsping gtxprod2 (>)
  Now you ask how the application will come to know what database to point to
  Go to oracle AS
  As using your forms and reports go to oraclebi/forms/server/formsweb.cfg

  At the end of the file, there might be a few entries
  for example
  [test]
  envFile = test.env
  Form = LOGIN_ENT.fmx
  LookAndFeel = oracle
  separateFrame = true
  UserID=nrs_fd/nrs_fd@fixdep
  SplashScreen = NO
  logo = NO
  Background = No.
  color = auto
  make = yes
  Archive = frmall.jar
  archive_jini = frmall_jinit.jar, frmwebutil.jar, Jacob.jar, icons.jar
  ImageBase codebase =
  term = frmpcweb.res
  baseHTML = webutilbase.htm
  baseHTMLjinitiator = webutiljini.htm
  baseHTMLjpi = webutiljpi.htm
  WebUtilArchive = frmwebutil.jar, jacob.jar

  "userid=nrs_fd/nrs_fd@fixdep" IE (username) / (password) @tnsname
  the following entry specifies what database, the application must point to

  If your using a war file, you must create a data source and as datasource, you must specify the tnsname input

  Concerning
  Fabian

• Oracle streams heterogeneous Support (non-Oracle and Oracle databases) envi

  Oracle streams heterogeneous Support (non-Oracle and Oracle databases) environments?
  
  It is possible to move data from Oracle to DB2 using Oracle Streams?

  Hello

  Visit this link

  http://download-West.Oracle.com/docs/CD/B28359_01/server.111/b28322/hetero.htm

  Kind regards
  Deepak

• on heterogeneous Services of Oracle and Oracle Gateway

  Hi all
  
  
  I am very new at this, I want to know:
  (1) heterogeneous services of oracle and Oracle Gateway even or not? Need to license or not?
  (2) want to creating link database to Oracle 11 g to Sybase 15.5 heterogeneous Oracle using the SERVICES what drivers should I install to my pc (windows 7) and my server (Linux red hat 5)? Please give me the link for this
  (3) is there a step by step link to configure odbc to create dblink?
  (4) what's more convenient connection of heterogeneous Oracle or Oracle Gateway Services sybase?
  
  Thank you very much for your help
  
  Concerning
  
  JOE

  Joe,
  Let the copy/paste your questions and comments online:

  (1) heterogeneous services of oracle and Oracle Gateway even or not? Need to license or not?
  Let me first clarify one thing, heterogeneous services is the generic mechanism in the database Oracle used by all gateways. The product you are talking about is database for ODBC bridge or the bridge of Sybase database.
  Database for ODBC bridge is available for Linux and Windows. It is the free product that does not require a license of Oracle. The license is included in your license data. It's a generic gateway which allows you to connect with any suitable part 3 ODBC driver to a corresponding foreign database. As this is a generic connectivity what words connect to real data, but also to MS Excel or text files as long as you have an appropriate ODBC, capacity driver is very limited.
  More powerful bridge is the bridge of Sybase database. It covers the same functionality as DG4ODBC but it also allows you to work with distributed transactions, you can call procedures stored remote Sybase etc.. This gateway is design for Sybase ASE connections, so it is also able to map some Oracle Sybase equivalent functions. This gateway for Sybase database is NOT free, it requires an additional license.

  (2) want to creating link database to Oracle 11 g to Sybase 15.5 heterogeneous Oracle using the SERVICES what drivers should I install to my pc (windows 7) and my server (Linux red hat 5)? Please give me the link for this
  It depends on your preferences. Two entry doors are available for Linux and Windows. When you use DG4ODBC, you must only be careful that you get a suitable 3rd party ODBC driver for this platform with the size of the corresponding word (64 bits for 64-bit DG4ODBC and 32-bit ODBC driver for DG4ODBC installations on 32-bit platforms).
  The latest version of the software is currently 11.2.0.3 and it can be downloaded (and installed from scratch) of "My Oracle Support". Simply open the patches & updates section, look for Patch 10404530: 11.2.0.3.0 PATCH SET FOR ORACLE DATABASE SERVER and make sure you choose the platform you want to use. Then check out the readme file it lists, which of these download CD contains the gateway software.
  BTW, the CD contains DG4ODBC and DG4SYBS and it is up to you to decide during installation of which product you want to use.

  (3) is there a step by step link to configure odbc to create dblink?
  Installation of the ODBC driver is different from one provider to another, and from platform to platform - so we didn't not a note specifies how to configure the ODBC driver. This kind of question is best managed by the provider of the ODBC driver.
  Regarding the implementation of DG4ODBC on Windows, you will find the appropriate information in the knowledge base on My Oracle Support. Just look:
  How to set up DG4ODBC (gateway for ODBC Oracle database) on 32-bit Windows to connect to Oracle databases Post Install [466225.1 Document]

  and to DG4SYBS:
  How to set up DG4SYBS (Oracle to Sybase database entry door) on 64-bit Unix (AIX, HP - UX Itanium, Linux and Solaris) Post Install [437696.1 Document]
  How the installer DG4SYBS (bridge of Sybase database) on a 64-bit Windows [Document 1319852.1]

  (4) what's more convenient connection of heterogeneous Oracle or Oracle Gateway Services sybase?
  It really depends on your needs. DG4SYBS is sullen more easy to install because this gateway comes with everything you need and you don't have to find an appropriate ODBC driver or get the working ODBC driver. It is also more powerful as you can for example use triggers that replicate changes to data in an Oracle database on the Sybase database in the same transaction. When you want to call Sybase stored procedures, you can also do this with DG4SYBS. So it really depends on your needs.

  -Klaus

• 5.1 ACS is not supported ODBC and Oracle

  Hi Netpro

  Train my familiar and careless with the old version of the ACS, ACS unit I bought two 5.1 device to work in the HA function. After installation and did ' t tried configured for use with the external database with ORACLE, I see nothing. I tried to read the paper and I saw no keyword that said this support the ODBC or Oracle version. If anyone can help me what is the workaround for ACS work with ODBC and Oracle.

  Thank you

  Pitcher

  This pitcher,

  4.2 the CSA can be installed on the CSACS-1120-K9 unit simply re-Imaging it (so not really a downgrade) with a dedicated DVD.

  You can get such a DVD through an official TAC case:

  http://Tools.Cisco.com/ServiceRequestTool/create/launch.do

  Kind regards

  Fede

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Disable the Tunning & diagnostic packs in oracle 10g and oracle 9i

  Hello

  According to the license agreement, our organization asked to disable the packs tuning & diag on Oracle databases.

  We use versions diff of databases oracle (oracle 9i, 10g, 11g)

  In oracle 11g, we can disable tuning & diag packs using the control_management_pack_access parameter to none.

  How to disable the setting & diag packs in Oracle 10 g and oracle 9i?

  Thank you

  AWR did not exist up to 10g, so I don't think that the diagnosis of EM or Tuning Packs are a problem with 9i.  As mentioned statspack is free and available always in 11g, so it is available for use.  -Mark-

• What LKM and IKM for b/w MSSQL 2005 and Oracle 11 of fast data loading

  Hello
  
  Can anyone help to decide what LKMs and IKMs are best for data loading between MSSQL and Oracle.
  
  Staging area is Oracle. Need to load around the lines of 400Million of MSSQL to Oracle 11 g.
  
  Best regards
  Muhammad

  "LKM MSSQL to ORACLE (BCP SQLLDR)" may be useful in your case which uses BCP and SQLLDR to extract and laod of MSSQL and Oracle database.

  Please see details on KMs to the http://docs.oracle.com/cd/E28280_01/integrate.1111/e12644/ms_sqlserver.htm#BGBJBGCC

• architecture of the relationship between R and Oracl

  If I know, this will be the great success for Oracle. architecture of connection between oracle and R.
  R customer send it is SQL for Oracle server and Oracle perform the function of ore itself and send the results to R on the client. as ore.lm
  for other R packages as SNA, IGraph, Data mining in R code sending R Oracle to on server R and R on server run and send to Oracle. Oracle, send them to r. He connect through a single port and is secure. IS TRUE MY WRITING?
  
  I have another question. If we R 2 or more on the server, how oracle identifies correct R? for example, I install R2.13 and R2.15 on the server.
  tanks for your attention
  
  Published by: Nasiri Mahdi on 24 February 2013 22:42

  Nguyen,

  Architecture of ore, take a look at [url http://www.oracle.com/technetwork/database/options/advanced-analytics/r-enterprise/ore-trng1-gettingstarted-1501628.pdf] the first presentation in our learning of the R series.

  For your second question. ORE will use R who we found during installation. The installer will display the value of R_HOME before it proceeds with the installation. In general 1.3 ore we recommend R 2.15.1 and ORE 1.1 - R 2.13.1.

  Denis

• Interlink with Sql server and Oracle

  Hello
  
  We have some data in SQL Server.
  We need to link SQL Server and Oracle Database. To make reports in Oracle Apex.
  
  Please someone guide me to interconnect with Oracle database
  
  Kind regards
  Thérèse

  Therese,
  You can find more information on gateways in this available in My Oracle Support note-

  Note to master for the Oracle Gateway (Doc ID 1083703.1) products

  Kind regards
  Mike

• IZ0-047 and Oracle 12

  Hello
  Article http://www.computerworlduk.com/news/applications/3361449/oracle-12c-database-set-for-december-or-january-release/
  The new version of Oracle 12 it is scheduled to be released in December this year or January 2013...
  I just want to know if the IZ0-047: SQL Expert will be valid for the new version of Oracle?
  your thoughts?
  
  Thank you

  I just want to know if the IZ0-047: SQL Expert will be valid for the new version of Oracle?

  It depends on what you mean by "valid". If you ask if people certified as SQL Experts will continue to have a valid certification, I guarantee that will be the case. Oracle does not invalidate existing certifications when new versions come out. SQL Expert certification, as certifications of PL/SQL Developer (and unlike the DBA certifications) isn't "versioned". Someone get this certification today does not become a "Oracle 11 g SQL Expert".

  If you ask if the content of the Expert SQL test will be valid for Oracle 12 c, the question becomes (slightly) more gray. I did not follow Oracle 12 c. I know it's supposed to be more cloudy, but little things about it. It may well contain new important SQL features that should be included in the review of Expert SQL. However, I am sure that it does not invalidate the information that exists in the current test. Oracle will not abandon ANSI SQL or remove existing features. Even if the new functionality exists and Oracle decided to add to a new version of the test Expert, it is unlikely for some time after the release and would probably require a new beta version review. In total, a new test 12 c-enhanced (if that was the same case) wouldn't be available until 2014.

  I can't worry too much about myself. If you are interested in obtaining this certification, so I'd go for the latest version rather than wait on a future update that may not happen for years.

• Oracle's 10 g and Oracle 10 g DB connection problem

  Toady, I installed oracle forms 10g and oracle 10g db when I run my form it gives me this error how can I solve it
  
  "ora-12154 tns could not resolve the connect identifier specified.
  
  
  Here are the values in forms 10g AMT
  
  tnsnames.ora # Network Configuration file: C:\DevSuiteHome_1\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVICE_NAME = PLSExtProc)
  )
  )
  IMS =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = IMS)
  )
  )
  
  
  and here the values of forms 10g SQLnet
  
  sqlnet.ora # Network Configuration file: C:\DevSuiteHome_1\network\admin\sqlnet.ora
  # Generated by Oracle configuration tools.
  
  SQLNET. AUTHENTICATION_SERVICES = (NTS)
  
  NAMES. DIRECTORY_PATH = (LDAP, TNSNAMES, EZCONNECT, ONAMES, HOSTNAME)
  
  (description =
  # (address = (protocol = tcp (port = 1383))(host=localhost))
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  (connect_data =(rpc=on))
  )
  
  Should what changes I make to overcome this problem.

  On a stand-alone computer (not connected to the network), you need a network emulation. If you use Windows, you can install Microsoft Loopback card (as indicated in the preinstallation of Oracle database requirements , see section * 2.4.4 installation Oracle database on Non-Networked computers *). If you do not use Windows - you will then need to find the equivalent for your operating system.

  In addition, as Paul M indicated, each product Oracle is installed in a House of Oracle. If you have configured the TNSNAMES on the RDBMS, but is not configured for the Suite of developer (Forms 10g), then you will need to perform this configuration. To do this, the easiest method is to set an Environment Variable (TNS_ADMIN) that points to the TNSNAMES file. ORA, you have already set up with your RDBMS. If you don't know how to create an environment variable, see: How to create environment variables.

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• NetBeans and Oracle

  "Forgive me that I am posting this in the wrong section.
  
  I have windows 7 as a facilitator and ubuntu 9 as a guest on my vbox.
  NetBeans is installed in ubuntu and oracle database is installed in the victory,
  now, I want to connect the two of them to do my development work... plz spotl8 on that, I don't know how to do this...
  If any1 require any kind of information please let me know...
  
  thnx
  Ron

  VirtualBox manual would be a good place to start, especially the section on the sharing of resources between the host and the client. It is essentially a question of network base, not a related programming at all.

• Linux kernel parameters and Oracle memory allocations.

  I'm currently creating an Oracle 11 G R2 in database, on a Linux (SLES 11) OS. The software OS and DB are the two 64-bit.
  I wondered about the optimal method of memory allocation shared, such that I can get the automatic memory management to recognize 12G of memory (which allows 4 g for the operating system and other pieces).
  
  I put the kernel parameters are:
  SHMMAX: 8589934592 (the recommended physical memory/2).
  SHMALL: 3145728 (giving a total of 12 GB of shared memory allocation that the page size is 4096).
  
  The way I read the documentation, it must free up enough shared memory to allow the specification of a memory_max_target and memory_target "11 g". I'm getting 11G to ensure that I am not ruin by a few bytes (if it all works, I will develop to 12G).
  However, whenever I try a startup, I get the ' ORA-00845: not supported on this system MEMORY_TARGET' error.
  It disappears if I create a great shmfs block using a mount command, but I was under the impression you had is no longer to do with 64-bit and Oracle 11 G system.
  
  Could someone clarify a little bit about what I'm doing wrong and where I should be looking for the answer?
  
  See you soon,.
  
  Rich

  Note 749851.1 ID and ID 460506.1:

  AMM all SGA memory is attributed by creating the files under/dev/SHM. When Oracle DB not allowances of SGA that HugePages reserved/does not serve. The use of the AMM is absolutely incompatible with HugePages.

  eseentially, AMM requires that/dev/SHM.