Test of local user name

Similar Questions

• local user name and password if the ACS server fails

  Hello

  I have every router and switch configuration for authentication of the connection via the ACS server.  I used these 12 lines below and it works very well.  Each engineer has their own account.

  AAA new-model
  AAA of default login authentication group Ganymede + activate
  the AAA authentication enable default group Ganymede + activate
  AAA authorization exec default authenticated if
  AAA authorization commands 15 default group Ganymede + authenticated if
  AAA accounting exec default start-stop Ganymede group.
  orders accounting AAA 15 by default start-stop Ganymede group.
  Default connection accounting AAA power Ganymede group.
  AAA - the id of the joint session

  RADIUS-server host x.x.x.x
  RADIUS-server application made
  radius-server key, regardless of

  ----------------------------------------------

  I would add to this a local username and password so that if the ACS server was offline engineers have yet to connect with a knowledge of username and default password

  username privilege 15 secret mypassword MYUSERNAME

  line vty 0 4
  local connection

  Q. How do I make ACS a first preference and connection server only local users username and password if the ACS server is down?

  Kind regards

  Kevin

  Now you have the password to enable as the fall back method:

  AAA of default login authentication group Ganymede + activate

  Change 'enable' for 'local' and the local (to the router) database of user names and passwords is used.

  The same works to activate authentication (the second line "authentication, aaa... ("in the config that you posted).

• install problem - c:\users\ < NAME > \appdata\local\temp\7zS171C.tmp\setup.exe the dependency service or group was able to start

  I use Win 8. I recently uninstalled Firefox on C: and am looking to reinstall on F:

  I downloaded the installation package full https://www.mozilla.org/en-US/firefox/new/?utm_source=firefox-com & utm_medium = referral, but when I ran the installation package, I got a popup window after the extracted package:

  c:\Users\ < NAME > \appdata\local\temp\7zS171C.tmp\setup.exe
  The dependency service or group could not start

  Any ideas?

  You may need to temporarily disable your security software (antivirus).

• Users /(user name)/AppData/Local/Temp

  Greetings,

  I'm trying to better understand the purpose of this particular Temp folder (usersTemp under Vista (ultimate).  Specifically, it operations, functional routines, application of the related activities, or other executions file would put files in this folder?  The question is asked by finding this Temp folder that is populated by a lot of Microsoft Word and PDF files that were created a long time ago and have resided largely intact in the original "saved in ' repertoire since then.  They are sensitive files and I want to understand what may have caused them can be completely copied to this folder.  (I'm a computer operating relatively new for which application all files were transferred from the old system running XP and earlier version of Office Pro.   The file transfer process went well with all paper, folders, files, and directories organized and working on the new system, as they had it on a prerequisite.  The files in Temp folder in question were created on old system years ago month.)  If some could refer to reliable, applicable information resources, that might be useful as well - in addition to any direct response to the motion may be possible.

  Thank you-

  Sincerely,

  Howard

  Description: Temp folder
  Location: C:\Users\\AppData\Local\Temp
  Why you be interested: many programs are in need of a safe place, where the user has permissions, to generate temporary data. This is the place to look. They may have wiped/grater the main file, but there may be a version in this directory according to the application works.
  Entered by: Irongeek, but thanks to Nir.

  Information appears in this issue most often when a program crashes and parts of open files are placed in this directory - it is very large, then you can have a lot of accidents.

  What are the dates on the temporary files and are they complete files or only the fragments of files (you can tell by trying to open them and see if they if they have valid file types)?  They occurred around the same time or they occurred over a long period of time?

  I do not know why these files seems suddenly in the temp folder if they have not been used in 10 years - I see nothing in Vista that would cause that to happen automatically.  Maybe someone actually did open without your knowledge (even though it will have to be an admin to access the source files, unless they know your user name and password).

  Open the folder Documents (the source of these sensitive files) and click on the title bar and then click more.  Check the Date of consultation.  Check Date of visit.  Check the last time.  Then go through the files to see this information on them to see if they have been recently accessed in these ways (you can delete the columns once you are finished).  If the dates are old, chances are good that they are not open (which should make you feel better, but why they appear in the confosing especially temp folder).  Are that they all the same type of file (as all .doc files) - if so, what file type and if not what types of files are involved?  Maybe something is happening with the program that created (is Microsot Word?) because of this activity (although I can't imagine what it is maybe).

  Make periodic backups, including these source files?  It is possible that the backup process is originally this activity (although I frankly never heard of this before and it would be a big surprise).

  Here is a link to a search engine Bing on "Appdata/Local/Temp" which can be a help to http://www.bing.com/search?q=Appdata%2FLocal%2FTemp&first=1&FORM=PERE (I it used to get some information here).

  I don't know if I answered your question - I think I have got approached in some areas but missed a few aspectis of your questions.  Be specific if you want information.

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• C:\USERS\USER NAME\APP Data\Local\TEMP\WER8D05.tmp.hdmp

  After installing the last 'Windows Live' (Messenger), I received the following error message every time I try to log on to my computer (Windows Vista - homepage):

  C:\USERS\USER NAME\APP Data\Local\TEMP\WER8D05.tmp.hdmp

  Windows live BETA has stopped and the error has been reported. I reported this problem several times automatically through "Problem reports and solution", but I get a message that there is no current solution.

  What can I do to fix this? Is this a problem of wrong temp files? Help, please.

  Uninstall Windows Live (Messenger, etc.), reboot and reinstall.
   
  "remotejazz" wrote in message news: 47 c 93466-b4cd-4bae-9e23-d391da700108...
  > After the installation of the last "Windows Live" (Messenger), I got
  > the following error message every time I try to log on to my computer
  > (Windows Vista - homepage):
  >
  > C:\USERS\USER NAME\APP Data\Local\TEMP\WER8D05.tmp.hdmp
  >
  > Windows live BETA has stopped and the error has been reported. I have
  > reported this problem several times automatically through 'problem '.
  ' > Reports and Solutions ", but I get a message that there is no current
  > solution.
  >
  > What can I do to fix this? Is this a problem of wrong temp files?
  > Please help.
  >
   
   

• Error loading C:\Users\User Name\AppData\Local\HpWebNotifier\SyncNetOffice.dll

  Whenever I start my computer, I get a pop-up that says: "error loading C:\Users\User Name\AppData\Local\HpWebNotifier\SyncNetOffice.dll.

  My computer and the printer work fine, but this message is boring.  I can't understand what the problem is.  I wonder if it is a question of an old printer that I used to be connected that I already uninstalled.  Does anyone have ideas how I can fix this problem?

  Thank you!

  Hello lisabar90,

  What operating system is your computer?

  What model computer do you use?

  Try this click Start, then hit and run and type msconfig.

  (if your computer does not have a run type msconfig in the search box and click on the application)

  Go to the Startup tab and see if you can see a reference to this place. Uncheck the box and restart your computer.

  After return your results.

• Domain change, deleted Local System account user. Need to c:\users\name a link to the new account 'user '.

  Help please!

  My main user account is corrupted somehow.  When I try and sign it immediately disconnects.  It is after some user account problems...

  History:

  I changed my phone from a domain to a Local computer.  This deleted my domain user account, but my files etc. are still in C:\Users\myaccountname.

  I followed the instructions here to Frederik Long:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/missing-user-accounts-after-Windows-7-restore/64c93151-dc6d-40FA-a9de-3356336f8f81

  This re-creates the user account, but it won't log in now. When I try and login it debits and then disconnects.

  Specifications of the system.

  -Lenovo T410

  -Version 6.1.7601 SP1 Build 7601 Win7Pro

  -Most up-to-date drivers

  Many would prove defective in Event Viewer... tried to fix a few elements such as Task Scheduler still having the old "Domain\myaccountname" domain as a user account to be used for several tasks, but I am now ideas.

  No point system restore not reported by system restore (unlikely, given that I remember many being created relatively recently), but maybe it's because I'm logged into a user account Admin backup.

  Any suggestions or ideas appreciated.

  Hello

  Thanks for posting your question on the Forum of the Microsoft community.

  Given that your problem is a domain account, governed by different group policies, he needs to have checked whether administrative privileges have completely been provided to the local user. I would recommend so post your query in the TechNet Forums for best expertise on this issue.

  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps

• When I try to share files between two computers Windows XP with SP3, I'm invited for a user name and password on both.

  I set up a home network with 2 computers with XP Media Center 2002 SP3 1 and 1 with XP Home SP3 2002 can see computers on the network and the Ping works. But I wonder a user name and password. seems to come from the computer. Do not see documents shared to the Media Center computer.

  original title: file sharing problems.

  As far as I can remember, Media Center is XP Pro with additional multimedia functions.  What follows is a very old post by MS MVP Malke, but the Council is still sound:

  File sharing / print

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine. With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Configure Windows to login automatically (MVP Ramesh) -.

  http://WindowsXP.MVPs.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• Updated mapping of user names in C:\Users Control Panel user accounts.

  Hello
  Windows Vista Edition Home Premium SP2. I'm trying to match user accounts in Control Panel with those listed in C:\Users\(name-of-user).
  I need to do this on a new computer, so I can network with existing computers.
  On my 3 computers existing, somehow my user accounts in Control Panel do not match the underlying names in C:\Users but I all do not match the same way on all computers and am able to share with them. For example, I have a user account named "ComputerAdmin" in the control panel that is the username 'Gift' which can be found in the C:\Users.I to add this fourth computer and match all names in C:\Users then they are the same on all computers, and I want to match user accounts in Control Panel so that they are all the same on all computers , and finally, I want to synchronize the C:\Users to user accounts in Control Panel on this fourth computer so that it will be in the network.
  I did this once before with the help and it was not too difficult to do, I just forgot how I did it. What is the best way to accomplish this task? All computers are running Vista. TIA
  Don

  I don't think it's your problem. If you have a user account password 1234 on one computer Bob and Bob password 1234 on another computer, properly configured firewall and actions put in place properly, sharing will be flawless. I answered your question above several times and I'm afraid that I don't know how to make it more clear. I am sympathetic that you do not want to hear this, but implementation of sharing between computers if bit normally takes about 5-7 minutes. But without being able to see your network and computers, I can't be specific about what you're doing wrong.

  Here's my usual network troubleshooting information. If you still can't get it, you can have one tradesperson come on-site and to fix things for you. This is not a person of a type BigComputerStore/GeekSquad of the place. I'm sorry that I wasn't able to help you.

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  (C) in Vista, turn on password protected sharing. Create accounts of users and corresponding passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  XP - set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  Vista - Start ORB > Search > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response. MS - MVP - Elephant Boy computers - don't panic!

• Windows 7 Home Premium - cannot change the user name in the authentication dialog box

  I was hoping someone might be able to answer a question on how to get a computer running Windows 7 Home Premium to display both the username and password fields when attempting to authenticate on another Windows computer.

  Here's the situation: allow us that the leaders and other members of the staff allowed our Organization to establish a VPN connection to our corporate network (via Fortinet Forticlient, for what it's worth.)  Once the VPN connection is established, on the remote computer, the user must be able to access the UNC path to our file (\\servername\share) server.

  Because the remote user has not yet authenticated on the domain Active Directory of business, a dialog box should appear to the user input a user name and password.  Enter the user name (domain\username) and password and share should open, and the user must then be able to access the files in the share.

  I (and several other members of the staff) have been using this method successfully to access files via the VPN connection, and it works very well.  However, it does not work whenever the President of the company will connect to the VPN from his computer at home.

  Whenever the President connects the VPN and attempts to access the UNC path, he reports that the dialog box which appears on his computer at home has only one field for a password; the user name field appears to be on his local user account, and it doesn't have the ability to change.  (I have him asked if there is an option 'use authentication information', and he declares that there is not just a dialog box with a single field, the field of password.)

  The President is running Windows 7 Home Premium on his computer at home, so I thought that the problem could be because he was running this edition of Windows.  However, I have installed VPN client and test the connection on the server share file using the computer of my wife, who is also running Windows 7 Home Premium, and I received the two fields as expected authentication dialog box and has been able to authenticate to the domain successfully and open files from the share with no problems.

  Does anyone have recommendations on what I can try to allow the President to authenticate successfully to our server share?  I am confused, and it is eager to be able to get remote access to files on his home computer.

  Hello

  Please contact Microsoft Community.

  I suggest you to ask your question in the Technet Forums, where we are the support technicians who are well equipped with the knowledge on these issues. Please visit the following link to go to them and post your query there:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Have a great day.

• Request user name and password when you try to load Windows 7

  We try to load Windows 7 on our office - he was moving along and then stopped to ask username and password - we have never set a user name and password on our machine and can't go back or forward, the machine is blocked.  What do we do?

  After you have created a username, you should be asked to create a password and confirm it.

  Just for clarication, you are in what we call the page Out of Box Experience, here are the simple steps to complete:

  Choose your country or region, time and currency and keyboard and click Next.

  1 type the name you want to use for the user name that is created locally on the client and click Next.

  2 across your account, a password page, type a password (twice) and an indication of password and click Next.

  3. on the Type of your Windows product keys page, enter your product key. If you do not fill this field, you will have 30 days to provide the product key. (I leave the product key white on test machines). The automatically activate Windows when I'm online checkbox is selected by default. If you choose not to enter your product key, clear this check box and click Next.

  4. the Please read the license terms page requires that you select the I have the license terms box, and then click Next.

  5 to protect your computer and improve Windows automatically page, there are three choices: use recommended settings (download and install all OS patches, drivers from Windows Update and Windows Defender updates, IE filter phishing and other updates when they are available), install important updates only (downloads and installs updates only) and ask me later (updated Automatic turning off the power). Choose the setting that suits you and click Next.

  6 set your time zone, the date and time on the review your page, settings of date and time and then click Next.

  7. the current position of your computer setting determines how secure your new customer. If you are on a home network of trust (which has a firewall between the client and the internet), choose home network. If the client is on a network of trust at work (once again, when there is a current firewall) choose work network. If you are in a coffee shop or any other public place with no known between the client and the Internet firewall, choose the network audience.
   
  8. you will see prepare your computer, then the Windows 7 desktop.
  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Create the local user g 12 DB

  Hello

  I am trying to create a local test user (DB 12 g Win7 / 64):

  SQL > conn sys

  SQL > alter session set container = PDBORCL;
  Altered session.

  
  

  SQL > show con_name
  
  CON_NAME
  ------------------
  PDBORCL

  
  

  SQL > create user test identified by the test.

  
  

  == > ORA-01109: database is not open.
  

  Select... v_$ services;
  

  
  

  0	pdborcl	2477889254	pdborcl		0
  5	db112gr1XDB	1684560570	db112gr1XDB	25.07.13	4091627695
  6	db112gr1	1712327574	db112gr1	25.07.13	4091627695
  1	SYS$ BACKGROUND	165959219		28.06.13	3062388681
  2	USERS OF SYS$	3427055676		28.06.13	3062388681

  
  

  
  

  Sorry, I do not learn and understand the new concept of the current user / local again.

  
  

  How can I start the PDB and create a local user to manage the normal grant as users of 11 g DB schema?

  
  

  A big thank you and best regards

  Friedhold

  
  

  
  

  Hi Friedhold,

  I think the problem is that you connect to the database container rather than to the snap-in data base. You must connect the name of service associated with this snap-in db. Change connection string to test/test@pdborcl

  that should be found in your tnsnames file. Or you can use a syntax ezconnect.

  sqlplus test/test@//localhost:1521/pdborcl (or something similar)

  I posted a similar example on my blog that you can follow from beginning to end that can help explain.

  http://dbaharrison.blogspot.co.UK/2013/07/create-simple-user-in-12C-pluggable.html

  see you soon,

  Harry

• Mac OS Server - local users on console does not.  The shared access or ssh on account works

  A Mac Mini running Mac OS Server has problems with authenticating the passwords of local users.  Users connect the console of the physical computer running macOS app Sierra and Server 5.2.

  I'm looking for a short solution from scratch user and migrating data to a new installation.

  My hunch is that there is an interaction with the server application.  The other Macs, I managed on the same network fail server and do not have these problems.

  I installed a new version of macOS Sierra and then migrate the old data server on using the migration wizard, but the problem persists.

  The server used to have users on the network, but they are all deleted, and all users are the.

  In application server, the only services running time machine, the caching server and file server.  DNS, DHCP and Open Directory services are disabled in the server application.

  A local user password will work normally when the computer is restarted.  But if the user disconnects, and tries to connect to or use the fast user switching back and forth between accounts, the password is not accepted.  On reboot, it will be accepted.

  In addition to passwords are not accepted, other errors when you try to connect to specific customers include:

  "Your account is not a valid directory.  For more information, contact your system administrator'

  or

  "On behalf of user that you selected is not available."  Check your network connection and try again to the user account.  If you are connected to the network, ask system administrator for assistance. »

  If a network is used to access the data of the user using the user name and password, it works.  Similarly, SSH'ing via the terminal using the username and password works.

  An admin user can change the password back and it usually works for one login.  Then the password is denied if the user disconnects or use the fast user switching.

  Thanks in advance for any help on this embarrassing problem!

  I should clarify: it's the passwords of local users on the Mac who stop working (for the connection or fast user switching), until the Mac restarts.

• Options &gt; Security &gt; passwords saved and printed on the site, the user name and passwords saved on my computer, thank you.

  Options > Security > saved passwords, can I print on the site, the user name and passwords saved on my computer, or how to locate the file where this information is kept. I change computers and want to transfer the information to the new laptop. Thank you.

  See

  • Print a list of passwords, must be run from a local drive by the directions), the - edmeister.com

• MOTOBLUR - ERROR ADDING THE ACCOUNT, USER NAME MUST NOT BE EMPTY...?

  Hello

  So here's my story... Today I decided to do a factory restore my world since I had seen some lag and thought that because I download as much just applications test and then uninstall them some 'basket' must have slept on my phone, causing my system to lag... I have provided zero factory, and everything was going well until the moment where I had to connect my motoblur account. When I logged on facebook, I noticed that instead of the Nice welcome message were characteristic of fb motoblur it just went to a cache of page that explains just read success!, I went and clicked done and then the same thing happened to twitter, but I thought everything was fine... I went and installed a few applications on the market, the top of the screens and other things and when I added my Social status widget I noticed it says to add a SOCIAL NETWORK (as if I had not added a network already)... I clicked on accounts and went on the facebook account, I had already logged in and noticed that the username is blank and the password used *... I clicked on save and got a message saying: ERROR ADD ACCOUNT. USER name SHOULD NOT BE EMPTY... same with my Twitter... and I can't sign in to any service motoblur...

  need help here since I use motoblur much... should I factory reset again?

  Thanks in advance!

  G

  UPDATE: HARD RESET FIXED!