Test reports implementation of barcodes on html

Similar Questions

• OATS: olt: where can I see Oracle load test report

  Hello

  When I run the script open (for load tests) reports are get generated in < Repo > / ScriptName/results/< Session > and it contains all the necessary information.

  Publient1) but when I ran the same load test reports are not saved @ the above mentioned location. I searched all directories, it seems that the reports are not saved to the local file system.

  Issue2) also., when I executed the command line load test with '-localFile = < Filename > .htm ' option, the file is not generated. Here's my syntex:

  /Scratch/ < folder > / oats12/jdk/bin/java - jar OLTCommandLine.jar - run - scenarioFile = "" /scratch/ < folder > / oats12/OFT/SearchTarget/SearchTarget.scn "- session = TestSession1430100808pm - OLTServer = localhost:8088 - user = oats-password = PWD123-iteration = 10 - groupdatanumber = 2 - ramptriggerafterseconds = 10 - VUCount = 6 - log = / scratch / < folder > TestSession1430100808pm.log - localFile = / scratch / < folder > TestSession1430100808pm.html"

  Above the case I'm exepcting "TestSession1430100808pm.html" file that is generated with all the results @ the place given, but it did not work.

  I tried the same example above giving the local directory is in dire.,./Abc.htm that does not work too.

  Hello!

  You must use - report instead of - run and the report will be generated.

  Attila

• Vista operating system. I get an error report "can't find printable HTML article.

  Firefox returns the error report, "Could not find printable html section" when you click on the printer friendly button. The printer friendly option work in Internet Explorer. Vista operating system.

  The developer of the page made a typo: the button is pressed by a script that seeks the printable element, but on the page, this item is marked printable - and JavaScript required an exact match.

  As a solution, you might set the font using the web console of Firefox. However, it would be wise to complain on the site if they did this on every page.

  To open the web console: Ctrl + Shift + k

  To correct the fault of typing, type or paste the following text at the side of the > and press ENTER:

  document.getElementById("printready").id = 'print ';

  Then click the printable version button to bring up the page in print.

  You can close the web console using the X on the toolbar or by pressing Ctrl + Shift + k new

  I hope this helps.

• How can I include results of a subsequence, which takes place in a new thread in the test report from the main sequence

  Hello!

  I have ", working with the Version 4.2.1 of TestStand. I have a main sequence, which sous-séquences of different calkls. All these steps are reported correctly. One of the subsequences works like "new thread". How can I include his results in the common test report of the main sequence?

  I have variable markes of the subsequence as is required for the test report (it works OK if it's not a new thread). If the digital test, which is performed in this subsequence is correct, I get no results at all. If the digital test could not get a "message in red" who whithout having failed to test any reference to step somewhere in the report of the main sequence or values of vaiables that were not correct.

  I tried an option 'on the fly' in the Configuration of the report, but n ' got no useful result. What should I do?

  Best regards

  Hello Pericles,

  You can use a queue time for the results of the wire once it ends. Place a waiting time after the call to the thread in your MainSequence at the location where you want the results to add to the report (compared to other results). In the waiting step Setup tab, select wait: Thread the threaded sequence, and then select call to specify sequence call the radio button. You can also use an object reference if you need results if poster somewhere where elsewhere - you would just add an object reference to the appeal of sequence threaded in its thread settings dialog box.

  I hope this helps.

  -Jack

• Why additional results stage does not meet the test report

  I have a file of sequence with several subsequences and I can't using step of additional results. I use the step of additional results in a subsequence and the specified results are added to the report test, but when I use the additional results stage on the main sequence, that nothing is added to the test report.

  There that something is off on the main sequence, which prevents additional results to add to the test report? I use the sequential model.

  The problem seems to be that the Locals.ResultList variable has been removed from your sequence. No results can be entered only if this variable exists.

• Skip test report and timestamp

  Hello, all the

  I am new to teststand and just starting to do some work with teststand.

  My interest is to report each step with the data start with a time stamp.

  I create subtest in the property of digital type in report d'YYYY-MM-DD-HH-mm-ss as timestamp

  These lower level are at the pre-trial stage and pre and post steps get timestamp at the beginning and

  post step I get a timestamp at the ens of step.

  Training of thing pretty well until I have to report a jumping event.

  A step jump does not work so a steps before and after report a timestamp as 00000000000000.
  How more to come this problem since I want to skip test report as it is exactly the same thing with 'Not Normal'

  is it possible to have a theses f (x) and f (x) at the beginning and the end of the stage of course type

  must be run even that step is skipped

  Thank you

  TP

  Found that under TS. StartTime.  Just a timestamp of teststand local time converter

• Test report reminder settings

  Hello

  In the test reminder report I am tempted to call a sous-suite which will create a custom (in addition to the default report) report.  The problem I encounter is most of the information for the custom report is located in "MainSequence.Locals."  Is there a method to pass variables via 'TestReport.Parameter' or find it using the RunState stack?

  Thank you!

  I don't think you can access the inhabitants of your performance filled with MainSequence - they are ignored when the MainSequence returns the entry point of recall process model MainSequence. Assuming you are using the recall of test report in your test sequence file, if you moved/copied information to the FileGlobals of your test sequence file before leaving the MainSequence, then the recall of test report in your test sequence file could see them.

  Hope this helps

  -Jack

• Can print wireless test report, but nothing else will print

  Hi, when I go to the IP Address of my printer and go to the part of wireless configuration, I can print the wireless test report. However, when I then go to print anything else from my computer, nothing happens. My computer recognizes the printer, and the installation program went well. He was able to print a page of test before, among other things, the first time that I installed it. Now that I restarted my computer, nothing happens when I try to print. Help?

  OK, thanks for that.

  Download and run this utility:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/printer_diag/&lang=en&softwareitem=oj-106151-2

  What did he say?

• HP 2760p: my hp advanced battery system diagnosis test report this msg FAILED ID:0LPXKW - 5QW860-QFPH5A-C0BW03

  my hp advanced battery system diagnosis test report this msg

  ID:0LPXKW - 5QW860-QFPH5A-C0BW03 FAILURE

  PRODUCT ID: XX049AV #ABD

  I think you can assume that this was not sold with a new battery is therefore one now.

• Printerwill not print elements in Quebec printing copy elements. Will display the wireless test report, but I use USB connection

  (HP 4580) does not print what items.  It will be printed "(scan and copy) and wireless test report, but I we USB connection to"

  My Compaq Presario CQ 60-41OUS Notebook PC.  Just reinstalled the printer pogram/driver.  He hhas worked OK for 2 years.

  Al to * address email is removed from the privacy *

  And the answer to your message of 15 does not solve the problem?

• Test reports

  Hello!
  
  I would like to test some of my printing reports.
  
  But if I use a standard way of reporting, it takes a lot of time (go through a very long work).
  So, as far as I know, to generate the report, I have to create a business object.
  Then create an integration object that is based on the business object.
  And then create a report, completed by the data of the object of the integration.
  
  Is it possible to create an applet with two input fields (name of State) and row_id of the business of the business object parent component and a "Generate report" button that does it all?
  What is a standard approach for test reports?
  How do you test reports in your environment?
  
  Thank you!

  OK I understand.
  Well that's just a guess (haven't tried): you can use the Siebel EAI adapter (request method) to receive the desired data in the simulator of Business Service. Specify the IO BEEP and the data object Id you want to with the request. Then, save the XML output file to a file and use it as an example of XML for BEEP in word.
  But I don't know if it works well!

• FrontEndCallbacks sequence on the launch of TS test report

  We have two configured systems, in theory, the same. We started to view the report for test FrontEndCallbacks.seq at startup. Not sure what happened to cause this but we have to stop this behavior before delivering the system. Any ideas what may have caused this and, more importantly, how to stop it?

  Thank you!

  It is a full on the report or is - it just that he performed.  There is a difference.  Find it me hard to believe that you would get a report HTML or XML from the Front End Callback.

  If you go into the Options of Station on this machine and make sure on the execution tab this Trace in reminders run separate is disabled and also this Trace in the ports of entry is disabled.

  Hope this helps,

• Apple Hardware Test reports error message

  If you want history, scroll to the bottom. Here's the short version: Apple Hardware Test indicates error 4SNS/1/40000001:VeAS-0.000

  This page handy tells my that '4SNS' = a sensor problem. 'V' indicates that it is a voltage sensor; and 'e' is short for PCIe. There is nothing on AS - 0, 000 but I'll allow myself that it could indicate the location PCIe 0, i.e. the bottom, 16 channels gpu 'main' slot. If anyone can confirm or correct this assumption, that would be sweet.

  Most important: how serious a mistake it is? I have a Radeon HD 7970 GHz 3 GB edition. I'm he put at risk by continuing to use it? I plan to play a lot more, some on El Capitan, but more on Windows, where I can experiment with overclocking my already factory overclocked GPU. It doesn't seem to be a problem in terms of overclocking software is. Reports of tension, times and speeds of fan exactly as expected.

  And the main reason I upgraded from my great MacPro1 OG, 1 to a 4.1 is because I intend to upgrade GHz W3520 2.66 in the 4.1 to a 3.46 GHz W3690. With the upgrade of the processor, I had planned to keep this box for several years. This error indicates that this particular Mac Pro is less great, or maybe even a lemon?

  The seller is apologetic and will accept a return. Which will cost me $40. I would stay there or is it really not a problem. It was really a lot...

  As you stock up on for Apple hardware Test error messages are very cryptic and not really documented.

  I don't know of anyway to know if it's a "fatal" flaw

• BatchModel - 10 loops and save the test report after each complete loop

  Hello everyone,

  We are using TestStand 2010 and currently using the BatchModel.seq for a quantity of 4 four DUT in a configuration of Burn-In.  Ten 10 times in a loop sequence of customer.  I wonder if there is a way to save the test at the end of each loop data report and create a new one for each of the loops after that.  Is this possible or I asking me too many software TestStand?  Thanks in advance for your responses to this last post.

  Kind regards

  Scott

  Hi Doug,.

  Thanks for the reply.

  I will discuss with my colleague who had a hand in the development of this customer file.  This customer file has been developed mainly by a contractor who works for our client.  These sound options as they will do the trick.  The customer file is used to Burn-In, so there are three levels of testing at three different temperature levels.  We strive to find some possible bugs in the code to that contractor that blocks the client file and all data is lost.  This will at least give us some options of data collection in a way that we should not worry if there is an error during the process and at least keep some data.  Thank you for your reply and if there is anything else, with that we have trouble, I'll post again.

  Kind regards

  Scott

• Several numerical limit hide the exits "Unused" in the test report

  Hello

  I have a question about several limit test digital and output report in ascii txt format:

  Example of a measure, that's what I see in the txt file:

  Measure [74]:
  Limits:
  Low: 4.75
  Top: 5.25
  LowExpr: "
  HighExpr: "
  Units: V
  Comparison type: FROZEN (> =)<>
  CompExpr: "
  UseCompExpr: false
  Data: 5
  Status: passed

  Is there anyway I can hide or "understand" the unused portion of the output?  In this case I have LowExpr, HighExpr, CompExpr and UseCompExpr.  It will be cleaner and easier to navigate... basically this report:

  Measure [74]:
  Limits:
  Low: 4.75
  Top: 5.25
  Units: V
  Comparison type: FROZEN (> =)<>
  Data: 5
  Status: passed

  Kind regards

  Mike

  You're probably missing an indicator which is supposed to be there for some properties (i.e. PropFlags_DontCopyToResults). I don't see enough detail in your screen to see why this is happening, but if you enlarge the column in the middle or mailed this that all expressions are you using, I might be able to see what is happening. You can manually / programmatically readd this indicator for some properties, but it should really be configured by default on the expr properties already so I don't know why it isn't in your use case. The steptype sets the flag when running on the LowLimit and HighLimit are used as necessary for the case in which only one or no limit. It is generally expected the flag already set the other properties in need at the time of publishing.

  You can view the source code at:

  TestStand\Components\StepTypes\CommonSubsteps\

  to see how the type of step limit multinumeric sets the flag.

  Hope this helps,

  -Doug