Test the State of ObjectChoiceField

Hi all. I'm working on my first app, and I'm trying to learn how to dynamically change the fields on the screen according to the current state of an ObjectChoiceField. I have the setup of ObjectChoiceField with a listener that works properly. I'm stuck on how to detect what value in the ObjectChoiceField is currently selected. Pretty much, I am able to detect that the field has been modified, but not that. Below I've linked the code with # signs showing where I'm going to the place of the logic to decide which field returned to push on the screen.

import net.rim.device.api.ui.*;
import net.rim.device.api.ui.component.*;
import net.rim.device.api.ui.container.*;
import net.rim.device.api.ui.Manager.*;
import net.rim.device.api.ui.UiApplication;

/**
 *
 */
public class NewItemScreen extends MainScreen
{
    //Set Form Variables
        private LabelField applicationTitle = new LabelField("New Item");
        private EditField itemTitleField = new EditField("Title: ", "");
        private String typechoices[] = {"Project", "Task", "Event"};
        private ObjectChoiceField itemTypeField = new ObjectChoiceField("Type: ", typechoices, 0);

    public NewItemScreen()
    {
        super();
        //Add to Screen
        setTitle(applicationTitle);
        add(itemTitleField);
        add(itemTypeField);
        //Set Listeners
        itemTypeField.setChangeListener(new ButtonListener());
    }

    //Implement Button Listener
    private class ButtonListener implements FieldChangeListener
    {
        public void fieldChanged(Field field, int context)
        {
            if(context != FieldChangeListener.PROGRAMMATIC) // Perform action if user changed field.
            {
                if(field.equals(itemTypeField))
                {
                    #################
                }
            }
        }
    }
}

As a suggestion, you can replace #... # with something like

int index = itemTypeField.getSelectedIndex ();

String selectedOption = typechoices [index];

If {(selectedOption.equals ('Project'))

Does that help?

Tags: BlackBerry Developers

Similar Questions

How to detect the State of a LabVIEW test success/failure

Which variable TestStand should I read to determine the State of a test of TestStand set success/failure?

I use the parallel model and LabVIEW can see index of my process with the variable "RunState.TestSockets.MyIndex", but now the LabVIEW needs to know if this process was successful or failed the entire test.

Possible, recommended to capture those (so do not use the "built-in controls visible TS') is to capture the UIMsg_EndExecution (which is generaated automatically if the engine ends an execution).

This message to user interface, you can access its data, one being the property of Execution.ResultStatus and execution.

See using TS for the possible values of ResultStatus. This allows to control indicators on your UI.

hope this helps,

Norbert

How can I test the Boolean State of the button action?
Hello
in as2.0, how can I test the Boolean value if a key has been pressed or not?

I have a function simple im trying to work with like that...

button_btn.onRelease = function (success: Boolean) {}
If (success) {}
trace ("we pressed the button value is true");
}
else {}
trace ("value is false");
}
};

working with Boolean values in this way is new to me - pointers will do - thanks!

I got it! Here's a quick run down in a table format, hehe

cry [0]...
[1] create a Boolean variable
[2] create your switch case statements correctly //which I have...
[3] condition your Boolean in case statements
[4] and then create your button managers
[5] if the Boolean value is true, then say stream_ns.seek (0)
[6] happy!

Thanks again K - have a nice day.

test changes in the State

In the effects of video overview create widget button States. Muse CC tutorials Adobe it says he can have a change of State if it flies over the text. My question, how he does it? I've manually created a menu and wanted the text to change on rollover and active States. Is there a way to do this? I tried to change States in hyperlinks: styles of text link, but those who are not working anymore. Right now I use frames on the text box to get there, but it is not what I had originally envisioned. Yabo Productions for reference.

Hello

Please select the block of text you want to change the State, open the States Panel (window menu > States). and you make the desired changes, then.

I would like to know if it's something else you were looking for.

Concerning

Sonam

How can I test the memory on my powerbook pro

My Powerbook Pro sometimes do strange things. Now, I would like to test the internal memory and the memory of my card. Is there a good way to test it? In the past there where the programs official test of apple. But now it seems not to be around.

Thnx

confusion between the statements of product:
1. PowerBook pro (title & 1st sentence)
2. Mac Pro (product information on your Bio page)
A 'Macbook Pro' is a portable device. A 'Mac Pro' is a desktop computer. If you need help to determine your model of Mac > How to find the model and age of your Mac?

Using Apple Hardware Test - Apple Support

Why not tell us what happens in detail?

Tell us a story

-with a beginning, middle and end. We need to figure out what you know and that you have lived.

If this problem is new, tell us what immediately preceded its appearance - add software, upgrade or update? New equipment?

Quoted by of Apple  'how to write a good question.

To help other members in answering your question, give as much detail as possible.
- Include your name (peripheral) product and specifications such as the speed of the processor, memory and storage capacity. Please do not include your serial number, IMEI, MEID or any other personal information.
- Provide the version of your operating system and the relevant applications numbers, e.g. "OS X 10.4.11" or "Safari 4.1.3.
- Describe the problem and include all the Details on what seems to make it.
- The list of troubleshooting steps you have already tried, or temporary corrections that you discovered.
For a detailed 'coaching', please see usage tips , help us help you on these forums and wrote an effective communities of Apple Support question

"Keep it short and Simple"-take your time... but be thorough - CCC

How can I reset my R7000 in the State in which I out took it of the box?

How can I reset my R7000 in the State in which I out took it of the box? Why am I asking? The latest version of the firmware has destroyed the connectivity and performance of my router. I'll have to deal with the devices that can not connect, devices that fall, extremely poor performance, etc. It's just a disaster.

I've been with Netgear 5-6 years and had to do something last night, I have never had to do before - I had to go back to an earlier version of the firmware. Honestly, very little worked well. The previous version of the software has a few hiccups here and there, but the new version is just a nightmare.

Now that I have applied even if an earlier version of the firmware, I can still see some of the latest options which were not there before. I have taken note that the firmware was now the prior publication, but the GUI is still the current version.

Just to give a time frame on my Nexus 5 running 802.11ac, prior to the current version, I could peg 90Mbps +. Since the new version, the best I can do standing right next to the router is 24Mpbs +. Even after the restoration of the previous firmware, the speed is always the same.

So, I want to return the router to the shape that when I took it out of the box, apply the previous firmware and reset up if necessary. I want to just my router back prior to the most recent release that destroyed. Once again, that the release had a few hiccups, but it was still usable.

The 30-30-30 reset method works on most routers out there, but not on the R7000...
The correct way to reset your R7000 at the exit of the State of the box is...

Download the original version of Netgear R7000 Support HP http://downloadcenter.netgear.com/en/product/R7000(Firmware Version 1.0.0.96)

Reset and flash back of any Stockfirmware on the original Stockfirmware:

Power on the router
Wait a few seconds
Press Reset for 5-8 seconds max! **
connect to 192.168.1.1
Flash the original FW
now that the router restarts
Wait a few seconds
Press Reset for 5-8 seconds max! **

* After each reboot, the first login on StockFW screen should show something like "refresh the settings or the settings of loading.

Now, it's as out of the Box.

Reset and flash back to any DD - WRT FW to Stockfirmware initial:

Power on the router
Wait a few seconds
Telnet to the router
Run the commands:
'clear the NVRAM '.
'reboot '.
Wait a few seconds
connect to 192.168.1.1
Flash the original Stockfirmware through the Administration tab (if the upgrade fails and the site is not available, try another browser such as Firefox, chrome, safari)
now that the router restarts
Wait a few seconds
Press Reset for 5-8 seconds max! **

* After each reboot, the first login on StockFW screen should show something like "refresh the settings or the settings of loading.

Now, it's as out of the Box.

I have reflashed several R7000 to initial Stockfirmware as the last FW with Beamforming was not stable enough after several days/weeks testing... The FW showed massive connection drops after 24 hours and only a reboot of the router fixed it (tested on 3 x R7000)

The connection has dropped from 1300 to 66-256 after several hours...-. -.

Now I'm waiting a new FW version with corrections of Wifi of Netgear.

The use of DaqMX for reading the State of 2503 PXI or PXI-2527 switch

I was wondering if there was a way to non-destructive know what that setting of the State. I'm working on some diagnostic software to be run along the side of our tests, and it would be really useful to be able to know what each of the channels are switches are currently connected to.

In c#, I use this to actually set the channel-

DaqSystem.Local.ConnectSwitchChannels (channel 1, canal2, true);

but have not actually been able to find something on because what channels is currently defined. I found this.

DaqSystem.Local.CreateSwitchScanTask

but I'm not sure it's what I want to do.

Any advice?

Thank you!

Hi Joel,

I believe that this is the function you're looking for.

Help OR switches can be found in the start menu, National Instruments, OR-Switch and Documentation.

Thanks for the question!

Lisa

Reset the PID.vi only once on the State transition

Hello

I'm controlling a fatigue gear using LabVIEW test bed and I use the PID.vi to control the hydraulic circuit. During the transition from the start as a test State, I need once the PID (the integrated error) values to be reset during the transition. The current configuration constantly resets the PID causing the hydraulic output voltage to be lower than the set value. I can't understand how to be set to Boolean false to pass true during the transition from the State and then back to false to prevent resets of the other by default. I have attached the current revision of my code.

Thank you very much for your help!

Trace

It's a good idea, but it is not necessary to select blocks with the true and false as inputs, just equality by different and use the output directly to reset.

Also, I see that you have PID blocks in two separate cases. Note that those will act independently from each other - if you reset into a State, then move to another State, it will not be reset. Maybe it's what you want, and maybe it isn't, but be sure to put multiple instances of the PID block that control the same in different cases. You can also see weird integral questions when you place in case, if a long time share when you run the same instance.

For the State Machine logic makes me Mad, ideas?

Hello

I am a complete newbie to Labview and up to the help of kind people on the forum and tutorials tips, State where I implement a state machine. However, I can't it behave using logic.

What I try to do is to test the relay using an automated test procedure.

The procedure takes the following measures:

1. a card reader and transistor NI9472 DO turns the relay power via the power of the coil (needs of the variable time period). (It's OK)

2. account of how can cycles the relay contacts worked, it will easily exceed 100,000 cycles. (It's OK)

3. every 10 cycles (new variables), the contacts are held closed, load circuit "15A in the state machine" (the current relay is switching, which will be 15 a at 30V) is turned off.

4. While the State of 15A is off, I need to switch to 'State of 1' and the 'State of the measure' , that it allows the measure to take.

5. Finally, the "State measure and the"State of A 1"must be turned off and the"15A State switched back on .

6. this process continues for another 10 cycles and repeats.

I tried to do by using the States and the logical selection function for different States, where she part works, it does not seem to flow completely. I'm I missing logic.

Hoping someone may be able to help, thanks

Andy

I really didn't thing you want to be returning this Boolean value in all States. You should probably also have a different evolution register for each line of output. Then you simply adjust those that you need to.

Incorrect, test the results of the e/s digital PCI-6024E in MAX

Hi all

I have a problem with PCI-6024E. It is for the Commission alone OR installed on a target computer. First he just used OR-traditional DAQ (7.1, if I'm not mistaken) and it worked fine. Some time ago I installed NOR-DAQmx 8.7.1 on the same computer because it is necessary to run both programs written with NOR-DAQmx and NOR-traditional DAQ. As I know there is no harm to do both OR-DAQ and NOR-DAQmx on the same computer if they are not used at the same time. You can see the traditional under NOR-DAQmx devices and peripheral branches DAQ PCI-6024E jury in MAX. When I run the self-test, self-calibration or Reset Device, Max there is no problem. But Test panels (under the direction of NOR-DAQmx) has a rather strange behavior. When I press the "Start" button in tab e/s digital Test panels window with all the digital lines in input, the 4 first green indicators are on and the other 4 are not. And then nothing happens or I press the 'Stop' button or not. I have the same card as a virtual in my MAX on a development computer, and there is a different behavior of it (I don't have traditional DAQ here, just the same version DAQmx). During the entire procedure of test until I press the button 'Stop', the port State 8 lines constantly evolves so the Green indicators are switched on and off with different ways through all possible combinations of logic '1' and '0' in each line of the port.

The problem is really obvious when trying to control the statements of some laboratory equipment using their passage through PCI-6024E. digital controls. In this case I get auto turn on/off devices connected to the first 4 lines (which are always lit for some reason any as stated that the Green indicators).

What should I do? This means the Agency is malfunctioning or there is some conflict of data acquisition and acquisition of data-mx? I would try reinstalling DAQ - mx, but I don't think it's a way out of the situation. I work under Windows XP SP2.

I appreciate all help.

Igor-

Your digital outputs will remain in their last State configured unless the device is reset, in which case they will go to the default value (high, in this case). So if the last State of the low output of your digital program, as long as you do not call the Device.vi DAQmx reset or shut down the computer, they will remain weak.

If you have other questions about this application in LabVIEW, it would be better to create a new post on the forum so that we can keep these two separate issues (States of I/O digital by default against digital programming in LabVIEW). If you are looking for a starting point, you can open the Finder example in LabVIEW ('Help' to find examples). "" Once the example Finder opens, click on input and output material"DAQmx ' digital generation ' write Dig Chan.vi. This will help you start.

Better luck with your request and have a great day!

a numerical limit several test, the individual results of pass/fail there?

I want to communicate the pass/fail status to my custom user interface so that I can color components red/green they spend and fail. I intend to send the State of pass/fail with an ID corresponding to the element using UIMessaging. The UImessage is sent by the sequencePostStep callback.

Send individual pass/fail status is simple enough forward (step.result.status) for all stages except test multiple numerical limit. Is there a way to get the information of pass/fail individual for each item in a test of numerical limit multiple? Individual information is available in the report. Could it be pulled from the [ReportText]?

Hi Dillon,

You can get multiple results in a limit test using Step.Result.Measurement ["Measurement 0"]. Status, which will give each individual measurement result. You can assign the results of the 4 comparisons by using something like this:

Locals.multstring [0] = Step.Result.Measurement [0]. Status,
Locals.multstring [1] = Step.Result.Measurement [1]. Status,
Locals.multstring [2] = Step.Result.Measurement [2]. Status,
Locals.multstring [3] = Step.Result.Measurement [3]. Status

If the chain is too great for practice, you can browse using a loop for. Let me know if you have any other questions!

Test the analog inputs in a PCI-6013

Hello. I m using a PCI-6013 OR DAQmx 9.1.1 with Labview 8.2 (sued) WinXP. The jury has undergone an immersion in water during a flood but was cleaned, recognized by WinXP and NIDAQmx.

I have run the Measurement & Automation explore and use the test under option OR-6013 'Dev1' panels 'devices and Interfaces. Here, I can see that the digital and clock output work perfectly (I can change the State of the digital channels and duty cycle and frequency of the clock). The problem arises when you try to measure an analog voltage. I tried on several cases not all analog channels using NRSE and differential modes (switch accordingly connections).

The signal comes from a (4 Hz, squares and sines, 5Vpp) signal generator via a CB-68LPR connector.

I only see something comparable to the entrance of singal when you use differential inputs (signal connected by J57 and J23) AI7, but the signal I see comes with 100 mVpp instead of 5 Vpp (I can see changes in the shape, every time that I have spend of a sine, square, ramp...). I also tried connecting J23 AISENSE (J62) and AIGND (J67), to avoid the problems of floating source. The same thing happens when enter and set up the acquisition by the vicinity of data in the Explorer of Measurement & Automation. I m using the reach of the signal in the different ranges, tried with 04:55, -1 to + 1, 09:50... When you configure tasks NIDAQmx I choose to read different samples (100, 1000, 10000) rate (100 Hz, 1 kHz,...) and combinations. Anyway, the input signal is always 4 Hz. I checked the signal with an osciloscope and I see it perfectly.

Is it possible to have the broken while the digital and general-purpose analog input clock outputs are OK? Y at - it a tip for the connections I should know about? Thanks in advance for any guidance!

Thank you both, KateB and MarisolM for your answers.

I made several the tests con señales DC y con señales senoidales, instalando placa en back different computers, y no obtengo resultados positivos, is spite of what el self-test selling well. Seems that the Plaça realmente esta fallando.

I did several tests with DC signals and senoidal, installing the card in two different computers, without positive results, even if the self-test is OK. It seems that the Council really works hard.

Are concentration cotización por su reparación. Gracias!

create a list or a container for the States of a statemachine

Hello

I'm working on an application where many different types of devices will be put into a test set-up for Board level testing. Depending on the type of Board, I need to create an ordered list of all necessary tests for the device. I have a state machine and a single State for each of the tests and try to figure out how to create a list of tests for the specific device. I want to have control in each of the States to remove the first element of the list and then take the next value and he lead the shift register used to go from one State to the other. This should allow the state machine switch to the appropriate State based on the type of device and its sequence of necessary test.

It should be with a table? Is there some containers easier to work with this use case? I need a container that will allow me to easily add between 5 and 30 names of State (based on the needs of the unit type) and easily remove or increment a pointer to the next State in the container.

Thank you

Gary

Hi Gary,.

an array of string or "enum" comes to mind. You can use it for the selection of States.

You have to transfer data?

Another way would be a queue. You can read the States with the enqueue function.

It may be useful

Mike

the statement in memory of reference '0x04d119fa' to '0x13acce40 '. the memory could not be "read".

When I use the right button of the mouse to extend the context menu,

as the title, the error message appeared.

the memory of the statement is always changed

not only '0x04d119fa', but also '0x046c19fa', '0x100019fa' or other appears randomly.

Why it is happening?

I use xp sp3 with the Korean version.

What you mean that: '.. '. menu popup .extend?

If Explorer crashes on right-click, looks like you may have a faulty Extension of the Shell Explorer.

Shell Extensions make up the content of what you see when you right click on something. If one of them is afflicted, which can cause Explorer to crash:

When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

Those who would be the Explorer extensions that do not belong to Microsoft. This means that extensions that you have added. Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (such as the scan of this file, open that file, play this song, etc...).

If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected. If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem. You can have a lot of installed non-Microsoft extensions you don't know even being given that some installed software installs new without tell you about it.

Download ShellExView here to see what Explorer extensions you have loaded:

http://www.NirSoft.NET/utils/shexview.html

ShellExView does not install anything on your computer, simply of runs and displays.

After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.

You can Google something like:

Explorer XP crashing (you must fill in the name of add your suspect on.)

See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

I'm not a defender of trial and error, but I can't think of another way to do...

Right click and disable the non Microsoft extensions one at a time (or maybe in groups of 3-5 at a time), keep a list, so you can enable them again later if you wish.

The result of the change is immediate and no reboot is necessary.

Test your right-click fault condition. If the Explorer starts to behave, you will know that an extension of this group of 3-5 is the culprit in order to start to enable them one by one until the Explorer fails again.

If you recognize all the extensions that have been added or recently downloaded, start with these first.

Don't forget - disabling the extension does not uninstall the extension - it is just disabled so you can always turn it on again. In this way, you can switch back and forth, enabled to be sure, you have the right extension under control.

Disable them one at a time until your right click on do not generate an error, then restart and test again to make sure the changes 'stick '. You have disabled the last extension would be suspicious.

You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave. When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

That means the State of error / of 0xC000185?

Hello

I am running Windows Vista with 3 GB of RAM.

It was working perfectly fine until I had the LCD screen of my laptop screen replaced.

Now, the system start and all programs start also is loading properly.

But when I click on anything either (start icon, Windows Explorer, etc.), the system becomes extremely slow and unresponsive.
After about 2 minutes of waiting, he throws the following popup: -.

-------------------------------------------------------------------------------------------------------------------------

The instruction at 0x724D49E7 referenced memory at 0x6BA80D30. The required data has not been placed

in memory because of an error of e state / of 0xc0000185.

Click OK to terminate the program

-------------------------------------------------------------------------------------------------------------------------

I want to know if this i/o error is because of my newly replaced LCD screen and what it means in general.

If you can shed light in how it can be fixed, it would be maybe great.
Reformatting my system is not an option (but that's what my hardware vendor suggested).

Kind regards
Amit

//
MessageId: STATUS_IO_DEVICE_ERROR
//
MessageText:
//
The I/O device reported an error of e/s.
//
#define STATUS_IO_DEVICE_ERROR ((NTSTATUS) 0xC0000185L)

To see if a fix is available

In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution. You can also right-click and choose Details for more information. Post these details here.

To see if any recent system change caused it

In Control Panel (and select Classic discovered in the left pane) choose Administrative Tools and then choose reliability and performance monitor and choose the monitoring tools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date (scroll left to see earlier dates). See if your plant has started to happen after you installed or uninstalled something.

Standard hardware troubleshooting

First to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...

Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.

Diagnosis of memory

If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

S.M.A.R.T

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)

WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List

If it is on will be true, otherwise on enable in the BIOS of the computer.

Predict the failure must be False if everything is ok.

In Vista and later if SMART failure predicted Windows prompts the user to run the backup.

Run chkdsk

In computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.

SFC

Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

sfc/scannow

Heat

Heat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.

For memory diagnostic results

Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.

Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

Double-click the entry for more details on this entry.

For results of Chkdsk

Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

Look for EventID is 7 and Source disk
Look for EventID is 11 and the Source disk
Look for EventID is 50 , and the Source is disk
Look for EventID is 51 and Source disk
Look for EventID is 52 and Source disk
Look for EventID 55 and Source is NTFS
Look for EventID is 130 and Source is NTFS

Look for EventID is 134 and Source is NTFS
Look for EventID is 137 and Source is NTFS
Look for EventID 1001 and Source is Autochk
Look for EventID 1001 and Source is Winlogon
Look for EventID 1001 and Source is WinInit
Look for EventID 1001 and Source is Chkdsk
Look for EventID is 26212 and Source is Chkdsk
Look for EventID 26213 and Source is Chkdsk
Look for EventID 26214 and Source is Chkdsk

Double-click the entry for more details on this entry.

PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.

If the results are transferred to the startup time events logs chkdsk, then the results are probably in the following file c:\Bootex.log. This file is removed when the results are placed in the event logs.

For the results of the SFC

Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

It will be able to see which files are corrupted.

To see if there

findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

There are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.

Test the State of ObjectChoiceField

Similar Questions

Tell us a story

Maybe you are looking for