TestStand value of a StationGlobal before execution of reconciliation

Similar Questions

• Module CVI written TestStand property, property value resets after the step execution.

  Hello

  I did a lot of research and find nothing relevant to the question that I have. I've created a DLL in CVI containing several functions I call TestStand. I also created a type of step customized for each function call. Every function in the DLL has a runtime version and a version edit-time. Time edition features each have a UI associated with them are called from teststand. Change these functions are placed in the custom under the heading "change" step step-type tab Before executing a sequence with these custom steps the edit-time user interface is launched to allow the user to input values that will be passed to the run function. originally, I tried to set up my functions as a 'post step' step in the step properties. However, the sequences would fail to run because the parameters of the step module was empty. Then, I selected CVI as the adapter in the step properties and specified a default module for each type. This filled the tab module settings step like I wanted. However, when I ran the sequence each function execution of measures was called twice, once for the stage of the post, and once for what was in the tab module I suppose. I then re-entered the types of step and deleted all the steps of the post office. I thought that all the problems have been resolved at this point, however, after doing some more extensive tests I always have a bug, I was unable to get rid of that.

  The problem is that two of my step types have to write data to current TestStand to execution after they ask an external device for IT. I know that the query works because my log text that generates the DLL displays the correct values. However, the data are not get rewritten on TestStand correctly. In the enforcement functions after checking the valid data has been returned, I try to write to TestStand using: "TS_PropertySetValNumber (seqContextCVI, NULL,"ThisContext.Step.ParameterValue.NumericParameter", 0, (double) ushortint);" »

  I checked that this call generates an error and also used the TS_PropertyExists method to check that I had the correct search string. These extract so I added then another command that reads the value written to TestStand two return immediately after to write it. I printed this in my log file and found that the value is written to the property of TS. So, the problem is that TestStand is defining the property to reset after the code module is running. How to prevent this?  

  Thanks for all comments, let me know if anything specified needs.

  Josh Meyer

  Well, I came to the conclusion that my 'problem' is not really a problem. I had a bit of a basic misunderstanding of the works of TestStand (I don't actually use it, I am writing just a code which will bring an existing one of the tools of the features inside the TS).

  in any case, what I learned is that these properties are retained (so you can set up a sequence, save it, re - open and be able to run it without any reconfiguration for example), when you write to a property when installing editting/sequence. The run time values are not preserved (if connected) because they are only required to carry out. For example, if a user calls one of these functions to extract value from a controller, they probably do so because they want to check the value, it's what they expect it to be. Rather than watching the value after execution (which is what I me assuming they would do), they would set up the step after step "read value" to test the value that it returned. This value is available in 'RunState.PreviousStep.valuename' in the downloaded step step "read value".

  Hope that I did not confuse anyone a lot, I'm completely new to TestStand.

• Validate VMName / Hostname in input field before execution of workflow

  I'm trying to understand if it is possible to validate the input fields before you run a workflow. The scenario I have is commissioning a new virtual machine. The user must enter the VMname both host name before sending the workflow. I have a couple of actions which will check to see if a VMname or host name is already in use. I want to be able to go is to stop the user to submit the workflow for execution, if the name entered already exists. Is it possible that I can do this?

  Thank you

  If the action returns an empty (or null), this is considered a successful validation.

  Any non-empty string is considered to be the validation failed, and the string value is displayed as the error message in the presentation of the Workflow Wizard.

  (If your action return type is not a string but something else, and you do not change, you can build expression OGNL in the property editor for custom validation, which will compare the result of GetAction () .call () with the desired value and return an empty string or string of the error message.)

• The execution of the sequence TestStand in LabVIEW via TS - API: execution different times for the same sequence

  Hello - the members of the Forum.

  I have a problem about the execution of a TestStand sequence into LabVIEW. I created a VI that offers the possibility to choose a sequence TestStand-file and then executes the sequence using the TestStand API. The implementation is based on an example in C++-Application found the following link:

  http://forums.NI.com/T5/NI-TestStand/unreleased-references-using-engine-API-in-C/m-p/2927314#M46034

  The app works pretty solid where the VI is executed the first time. The VI treats the sequence chosen in an acceptable time.

  But where execution is started again, the sequence takes approx. 30 sec more than in the first case.

  So far I have not found a solution and hope someones got a clue about this problem...

  I use 2013 LabVIEW and TestStand 2013.

  I enclose my own VI, a sequence of the specimen with a small sample of VI, so you can reproduce the problem.

  Kind regards

  TobiKi

  
  

• Set a value for an inputComboboxListOfValues before loading the page.

  Hello

  JDeveloper Version 11.1.2.4.0

  I want to put the PersonName (PersonId) value of the inputComboboxListOfValues as well as the value - PersonName display of the inputComboboxListOfValues before the page loads.

  I have PersonId and I can get the PersonName him. But do not know how to set the value until the page is loaded. If I put two PersonId, PersonName the displayed value is always set to null.

  The way I put the values is on the currentRow of the main object of the view.

                      <af:inputComboboxListOfValues id="personNameId" value="#{bindings.PersonName.inputValue}"
                                                    model="#{bindings.PersonName.listOfValuesModel}"
                                                    rendered="#{pageFlowScope.reportParams['personId'] != null}"
                                                    contentStyle="width:138px" partialTriggers="pcid" editMode="select"
                                                    columns="#{bindings.PersonName.hints.displayWidth}" autoSubmit="true">
                          <f:validator binding="#{bindings.PersonName.validator}"/>
                      </af:inputComboboxListOfValues>
  

  

  1. Get the current row of the object of the main view.
  2. Setting the 'PersonName' attribute that is bound to the inputComboBoxListOfValues and so is used for the display value.
  3. Definition of the attribute 'PersonId' to which the value is bound.

  Looks like that everything is settled in this way.

• Problem with pl/sql procedure, trying to get the value of the user during execution

  Hello

  Using oracle 11.2.0.3

  Can run sql that gets the value of the user during the fine workmanship and also via an anonymous block.

  uses of SQL & Enter_Product_Number

  anonymous block using: Enter_Product_number.

  However, get problems when trying to create a pl/sql procedure, use one of the above

  relevant below tried code part & and: buit works do not error, try bad bind variable if used: and ora-600 if try use &.

  How can we have a procedure from pl/sql that can call and receives a value of user during execution?

  Only way around what I can think of is to pass parameters to the procedure

  Thank you

  create or replace procedure ins_into_issues is

  v_nd_rec_cnt number (10);

  v_normal_rec_cnt number (10);

  Start

  Select count (*)

  in v_nd_rec_cnt

  refmast.issues I have

  where i.iss_product_num = & old_nd_product_number;

  Select count (*)

  in v_normal_rec_cnt

  refmast.issues I have

  where i.iss_product_num = & normal_product_number;

  -code below commented above works.

  end;

  Hello

  what something like this:

  create or replace procedure INS_INTO_ISSUES ( in_normal number, in_old number )  is
    v_nd_rec_cnt     number(10);
    v_normal_rec_cnt number(10);
  begin
      select count(*)
        into v_nd_rec_cnt
       from refmast.issues i
       where i.iss_product_num = in_old;
    --
      select count(*)
        into v_normal_rec_cnt
        from refmast.issues i
       where i.iss_product_num = in_normal;
  end;
  

  concerning

  Kay

• ORA - 06502:numeric or of value errORA-04088: error during execution of trigger

  I received the following error message by entering a number in the maximum value (i.e. 9 999 999.) allowed in a data entry form that is distinct from the basic form:
  
  ORA-06502: PL/SQL: digital or error number precision value: ORA-06512 too big: "< owner >. < trigger >", line 194 ORA-04088: error during execution of trigger '< owner >. < trigger >.
  
  Where < owner > is the schema name and < Trigger > is the name of the trigger. The block of data in the application for participation is based on a database table, and the sum of all the values entered (with a maximum value of 99.999.999.) appears in the form of Basic. A grand total of this amount along w / other totals on the basic shape is also displayed with a maximum value defined as 999 999 999. Only, I get the above error message when the total is greater than 99999999. If the total is less than or equal to 99.999.999, the basic form works very well. Why?
  
  I checked all the attributes of the database columns and form fields and everything seems to be okay, and I'm out of my mind. I desperately need your help to solve this problem quickly because the pressure is on...
  
  Thanks in advance for any help.

  Orchid says:
  Hello Hamid,

  Thanks for your help. Yes, it works as suggested, after that I have increased the length of NUMBER data base table column (9) to NUMBER (11).

  gives you the correct answer, and you don't mark it ;)

  >

  Apparently, Oracle database truncates the decimal points and only update the value of 9 digits without giving errors, but the form of Oracle application is more picky and it generates forms and Oracle error messages when you run the application. It seems that there is a difference when executing the sql commands in the Oracle database and execution of these Oracle Forms application controls. Do you agree?

  Yes

  Thanks again for all the help.

  You can only give reward for it by checking the useful and correct answer.

• Pass the value of the variable during execution

  Hello
  
  I have a package with a set of interfaces and three other variables.
  
  I want to pass the value of the variable at runtime, based on the value passed I want to decide which interface to run then. How can I do this? I got a set variable but I want to asssign the value during execution.
  
  Any help is greatly appreciated.
  
  
  Thank you
  San

  You have many options to achieve this goal.

  1. keep the run settings in the database, extract the Variables in a time of refreshment and use these variables in your Interfaces to get values of execution.

  2. change the value to the variables on the outside. You can declare a variable in a package as a step of the statement, and then use the variable in your interface in a successive step in your package. Then, create a scenario of your package and creating the scenario, it will prompt you to include the variables that you want to include as a startup parameter. Choose the one (s) concerned. Citing this scenario using Java or an OdiStartScen command or by using Webservices ODI externally, you can provide values of the runtime as a result.

  I hope this helps.

  Concerning
  A

  Published by: 922636 on August 29, 2012 23:53

• Cannot change the value of the cells during execution of the VI

  Hello

  I'm changing the values in the table while the VI is on, but without success, can anyone show me please how to do this.

  Thank you

  MGarry

  MGarry,

  something like this:

  

  Please note that this does not reset the contents of the table if you rerun the VI. You can add code to it.

  Norbert

• Access to the original value of a property before you apply an expression

  I have a layer that has an expression applied to the Position. The expression overrides the value of Position over time. I want to do is access the Position value as if she had no expression applied. The property("Position").value method does not work because it takes current Position which is influenced by the expression value. What I need is the original value. Is it possible to achieve this?

  You try to do it with a script or an expression?

  With a script, you use just.valueAtTime(time,preExpression) with preExpression set to true;

  It's more complicated with an expression but, if the value of the expression is static, you can use "negative time. In the expression, you do something like this:

  If (time<>

  value

  } else {}

  your actual expression goes here

  }

  Then your other expression could do something like this:

  your_property.valueAtTime(-1)

  If the value of the expression is not static, it's a little more complicated, but you can always do.

  Dan

• Passing the value to the function clears the default value of the textBox before onClick

  I created a 'clearTextBox()' function so that when an edittext obj is clicked in the default text disappears. He works until I try to spend the 'default' text in the service, to which cases it erases the text without the onClick. See: "textBox.line01.onClick = clearTextBox (textBox.line01, defaultText01);"

  myGUI (this);

  function myGUI (thisObj) {}

  var myGUIPalette = myGUI_buildUI (thisObj);

  function myGUI_buildUI (thisObj) {}

  var myPanel = (thisObj instanceof Panel)? thisObj: new window ("palette", "user input panel', undefined, {resizable: true}");

  {//Build GUI

  res = "group {orientation:"column",-}".

  titleGroup: group {orientation: 'row', \}

  myStaticText: StaticText {text: 'Handset team word interludes'}, \

  },\

  textLineGroup: Panel {orientation: "column,"------}

  line01: EditText {text: 'Enter the text line 01'}, \

  line02: EditText {text: 'Enter line 02 Text'}, \

  line03: EditText {text: 'Enter line 03 Text'}, \

  },\

  'ButtonGroup': group {orientation: 'row', \}

  clearButton: button {text: 'Clear'}, \

  renderButton: button {text: 'Making'}, \

  },\

  }";

  }

  myPanel.grp = myPanel.add (res);

  Default values

  //TextBox settings

  var defaultText01 = "enter the text of the line 01 ';

  var defaultText02 = "enter the text of the line 02."

  var defaultText03 = "enter line 03 Text."

  var myPanel.grp.textLineGroup = textBox;

  textBox.line01.text = defaultText01;

  textBox.line01.onClick = clearTextBox (textBox.line01, defaultText01);

  function clearTextBox (activeTextBox, defaultText) {}

  if(activeTextBox.Text == DefaultText) {}

  activeTextBox.text = "";

  }

  }

  Return myPanel;

  }

  If ((myGUIPalette! = null) & & (myGUIPalette instanceof window)) {}

  myGUIPalette.center ();

  myGUIPalette.show ();

  }

  }

  Hi sbaden04.

  Your syntax does not work, since the textBox.line01.onClick = clearTextBox (textBox.line01, defaultText01); entitled to textBox.line01.onClick the result of the right side, which is not a function, but undefined. You can try this way:

  textBox.line01.onClick = function() {clearTextBox (textBox.line01, defaultText01) ;};}

  Or like this:

  textBox.line01.properties = {defaultText: defaultText01};

  textBox.line01.text = defaultText01;

  textBox.line01.onClick = plain text;

  function clearText() {if (this.text = this.properties.defaultText) this.text ="" ;};}

  Xavier.

• How to check the existence of a value in a table before copying the data?

  Experts,
  
  I have a requirement in which I need to copy data (4 columns) table A to table B (4 columns)
  
  Table A (entry)
  
  PART_ID PART_NAME PART_OPT_CD ENGG_OPT_CD
  
  1 "AAA" 10 100
  2 'BBB' 20 200
  3 'CCC' 30 300
  4 'DDD' 40 400
  5 'EEE' 50 500
  
  
  I have a table named OPTIONS with a single column. This is a table of reference of business which has the master list of option codes.
  
  OPT_CD
  10
  20
  30
  50
  60
  100
  200
  400
  500
  
  
  I need to copy Table A to Table B, but in doing so, I need to check the values of columns 3 and 4 in the OPTIONS array.
  If there is copy the folder B. Otherwise error in the log in a file/table and continue with the next copy
  
  TABLE B (exit)
  
  PART_ID PART_NAME PART_OPT_CD ENGG_OPT_CD
  
  1 "AAA" 10 100
  2 'BBB' 20 200
  5 'EEE' 50 500
  
  WARNING file or a table should have the details below.
  
  300 ENGG_OPT_CD does not exist in the table OPTIONS, so part_id 3 have not migrated
  40 PART_OPT_CD does not exist in the table OPTIONS, then part_id 4 have not migrated
  
  Company don't bother about the format of error, we need this information to correct the OPT_CD in the OPTIONS table.
  
  Can anyone suggest a better way to do this. Thank you for your help in advance

  Hello

  Its very similar to your previous post.
  Re: PL/SQL help
  The only difference being that you have to outer join to your superimposed master table, since your search in two columns values occur only in a single column on your Master table.

  Something like that;

  create table a (part_id number, part_name varchar2(10),part_opt_cd number,engg_opt_cd number);
  
  insert into a
  (select 1 Part_ID, 'AAA' Part_Name, 10 Part_Opt_CD, 100 ENGG_Opt_CD from dual union all
  select 2, 'BBB', 20, 200 from dual union all
  select 3, 'CCC', 30, 300 from dual union all
  select 4, 'DDD', 40, 400 from dual union all
  select 5, 'EEE', 50, 500 from dual union all
  select 6, 'FFF', 60, 500 from dual
  )
  /
  
  create table b (part_id number, part_name varchar2(10),part_opt_cd number,engg_opt_cd number);
  
  insert into b
  (select 1 Part_ID, 'AAA' Part_Name, 10 Part_Opt_CD, 100 ENGG_Opt_CD from dual union all
  select 2, 'BBB', 20, 200 from dual union all
  select 5, 'EEE', 50, 500 from dual
  )
  /
  
  Create table master (OPT_CD number);
  
  insert into master (
  select 10 opt_cd from dual union all
  select 20 from dual union all
  select 30 from dual union all
  select 50 from dual union all
  select 60 from dual union all
  select 100 from dual union all
  select 200 from dual union all
  select 400 from dual union all
  select 500 from dual
  )
  /
  
  create table log_msg
  (msg varchar2(100)
  ,t timestamp default current_timestamp)
  / 
  
  SQL> insert all
    2    when Master1_ID is not null and
    3         Master2_ID is not null then
    4      into b (Part_ID, Part_Name, Part_Opt_CD, ENGG_Opt_CD)
    5      values (Part_ID, Part_Name, Part_Opt_CD, ENGG_Opt_CD)
    6    when Master1_ID is null or
    7         Master2_ID is null then
    8      into log_msg (msg) values (Part_Opt_CD || ' ' || ENGG_Opt_CD || ' does not exist on the Master table')
    9  select m1.Opt_CD      as Master1_ID
   10        ,m2.Opt_CD      as master2_ID
   11        ,a.Part_ID      as Part_ID
   12        ,a.Part_Name    as Part_Name
   13        ,a.Part_Opt_CD  as Part_Opt_CD
   14        ,a.ENGG_Opt_CD  as ENGG_Opt_CD
   15  from (
   16        select a.Part_ID, a.Part_Name, a.Part_Opt_CD, a.ENGG_Opt_CD
   17        from a
   18        left outer join b on  a.Part_ID = b.Part_ID
   19        where b.Part_ID is null
   20      ) a
   21  left outer join master m1 on   a.Part_Opt_CD = m1.Opt_CD
   22  left outer join master m2 on   a.ENGG_Opt_CD = m2.Opt_CD
   23  /
  
  3 rows created.
  
  SQL> select * from log_msg;
  
  MSG                                         T
  ------------------------------------------- -------------------------
  40 400 does not exist on the Master table   05-OCT-11 09.44.17.621000
  30 300 does not exist on the Master table   05-OCT-11 09.44.17.621000
  
  SQL> select * from b;
  
     PART_ID PART_NAME  PART_OPT_CD ENGG_OPT_CD
  ---------- ---------- ----------- -----------
           1 AAA                 10         100
           2 BBB                 20         200
           5 EEE                 50         500
           6 FFF                 60         500
  

  Note, I have included an additional line in table A in order to prove that the INSERTION will occur in table B. Errors, as you can see have been inserted in the table LOG_MSG.

  Published by: bluefrog October 5, 2011 09:48

• Execution of a procedure

  I have a procedure named format_it (10.33).
  How should I call it environments such as sql * more sql or plu or command prompt.
  When and where to use CALL format_it (10.33) and when and where to use execute format_it (10.33)

  PL/SQL code should be called (called) with the help of an anonymous PL/SQL block. For example, it is an anonymous block in a procedure called DoSomething (without parameters).

  begin
    DoSomething;
  end;
  

  This block must be created by the customer and passed to Oracle as the client will pass a SQL for Oracle.

  As a SQL statement, an anonymous block can also contain variables bind. The client will then bind values to these variables before execution of the PL/SQL code. E.g. call procedure FunkFoo which expects 2 parameters:

  begin
    FunkyFoo( param1 => :BindVar1, param2 => :BindVar2 );
  end;
  

  To simply test the proc, the customer can also pass literal values rather than (correctly) use bind variables:

  begin
    FunkyFoo( param1 => 123, param2 => 'Hello World!' );
  end;
  

  Some customers, such as SQL * Plus has its own control customer to define. In SQL * Plus, such a client command is EXEC - and this can be used to execute the PL/SQL code. Dynamically, this sales order automatically creates an anonymous PL/SQL block and encapsulates the content will be executed in a statement BEGIN and END; before you submit to Oracle.

• Get the workflow parameter value before the end of the SOAP client workflow execution

  I'm calling webservices SOAP Orchestrator of my request to run a workflow. I want to get a parameter/attribute value before execution of the workflow.

  Brief:

  I have a XYZ workflow that adds two numbers provided by my application. After that my workflow perform some other features that say 5 minutes.

  My application is the result of the addition from the addition is performed. I don't want to wait for these 5 minutes to finish after what my worlkflow is finished and then obtain the result.

  Hello DeepakPN - first of all, if you use vCO 5.x, we strongly recommend to use the api instead of the old api SOAP REST.

  Now, to answer your question:

  When you run a workflow, the returned soap body includes a return workflow id: this is your workflow token id - essentially the Runspace of your workflow. He looks a bit like this:

  
     
        
           
              ff80808141e74b090141f05c5d2c00f7
  

  There are several additional lines less than retail, but I left it as an important component of the info here is this tag . The value that it contained should be used with the operation "getWorkflowTokenForId". By providing this ID and your credentials, the resulting SOAP body will contain details of your performance at the time of your request. So, if you have your amount stored as an attribute at the time that you run the query, you will see the results. For my simple test, here is my operation "getWorkflowTokenForId" for a test flow that I came through SOAP:

  
     
        
           
              ff80808141e74b090141f05c5d2c00f7
              
              1a568e2e-5c15-4b68-9bab-20cb955f0004
              item0
              completed
              completed
              
              20131025120447-0400
              20131025120447-0400
              
  
  
  >
  >
  
  
  
  ]]>
           
        
     
  
  

  Inside the tag, there is a tag that contains each of my entries/attributes. In the code above, 'anyInput' is the input parameter for my workflow and of the "inputTypeName" as an attribute.

  Hope this helps

• How to detect if a TestStand execution has been terminated?

  We have written a GUI custom that has interface with TestStand to summon and control the execution of the sequence files.  In the course of a writ of execution, the operator can click a STOP button that causes run following code:

  this.myExecutionViewMgr.GetCommand (CommandKinds.CommandKind_Terminate). Execute (true);

  It works well, and TestStand is finished.  However, the event handler EndExecution tell me that execution has been terminated.  Here's what our code looks like:

  void EndExecutionEventHandler (sender As object, EndExecutionEvent ev)

  {

  This line ALWAYS returns SUCCESS or FAILURE

  This. Status = ev.exec.ResultStatus;

  The purpose of the error does not occur when I terminate

  PropertyObject errorObj = ev.exec.ErrorObject;

  If (errorObj.Exists ("occurred", 0) & errorObj.GetValBoolean ("occurred", 0))

  {

  error code string = errorObj.GetValNumber ("Error.Code", 0). ToString();

  string errorText = errorObj.GetValString ("Error.Msg", 0);

  MessageBox.Show (errorCode.ToString () + "-" + errorText);

  }

  }

  Is there a way to identify if a writ of execution has been cancelled, abandoned, etc.?

  You can also use Execution.GetStates and look at the State of cessation of employment to determine if it has been completed.

  -Doug