Module CVI written TestStand property, property value resets after the step execution.

Similar Questions

• Are you factory reset after the update

  I remember the froyo update left my lag and buggy x (very few, but noticeable). Everyone says the best thing is to do a complete reset after the update, if I had to re - install my phone from scratch... it was worth it! I anticipate this new... so we'll see.

  Fortunately with the new resettlement apps market will facilitate the...

  
  

• InputFile value lost after the validation fires

  Hi all
  
  I use Jdeveloper 11.1.1.5.
  I have a date. MinValue, InputFile and a commandButton control.
  
  Requirement: -.
  1. the user will select the file using the InputFile component, and then he clicks the command button to process the file.
  2. but if the date value. MinValue is null, the system will display an error message that the value of Date entry is necessary. (Note:-c' is just an example, the scenario real business contains a complex logic here).
  3. If the value is available in date. MinValue, the system will process the file.
  
  Now the problem is that if the user selects the file & directly click on the button, then as the component date. MinValue does not contain a value, it will show a mssage error, but at the same time the inputFile changes through update.
  Now, if the user selects a value in the date, and then he clicks the button, the value of inputFile in my managed bean will be void. Given that the user is nt going to browse the file again. In any case, there should be a way to get the value of the inputFile.
  
  This is my code jspx: -.
  < af:form id = "f1" usesUpload = "true" binding = "#{backingBeanScope.PanelSplitterBean.f1}" >
  < af:inputDate label = "Label 1" id = "id1" binding="#{backingBeanScope.PanelSplitterBean.id1}"/ >
  < af:commandButton text = "commandButton 1" id = "cb1" action ="#{backingBeanScope.PanelSplitterBean.executeFile} '"
  partialSubmit = "true" binding="#{backingBeanScope.PanelSplitterBean.cb1}"/ >
  < af:inputFile label = "Label 1"id = "if1' valueChangeListener =" #{backingBeanScope.PanelSplitterBean.getFile} ".
  Binding="#{backingBeanScope.PanelSplitterBean.IF1}"/ >
  < / af:form >
  
  This is my bean managed code: -.
  file UploadedFile private;
  private text RichInputText;
  private RichInputFile if1.
  private RichCommandButton cb1;
  private RichInputDate id1;
  private RichForm f1;
  private RichMessages m1;
  private RichDocument d1;
  private UploadedFile fo;
  
  {} public void getFile (ValueChangeEvent valueChangeEvent)
  Add the code in the event here...
  file = (UploadedFile) valueChangeEvent.getNewValue ();
  }
  
  public String executeFile() {}
  Add the code in the event here...
  try {}
  Here, it may be any postings business logic
  {if (ID1. GetValue () is nothing)}
  FacesContext.getCurrentInstance () .addMessage (id1.getClientId (FacesContext.getCurrentInstance ()),
  new FacesMessage (FacesMessage.SEVERITY_ERROR,
  "The date is requested."
  "Please enter date"));
  
  }
  else {}
  Gets the file with the null value if the validation of Date fires once.
  System.out.println (file. GetFilename()); +
  }
  Returns a null value.
  
  
  } catch (Exception e) {}
  TODO: Add catch code
  e.printStackTrace ();
  }
  Returns a null value.
  }
  
  
  Why the value of the file takes the value zero, if validation is triggered. Because either way, the user will fix the error and then click the command button? This point of time, that value will be nil in the object file.
  Is it possible to keep the inputFile value?
  
  Please think!
  
  Kind regards
  Shah

  Well, look more closely your still not formatted code shows you use support beanScope to store the value of the downloaded file. Problem is that after clicking on the button, the bean is killed and (now empty a new) is created. A reason to get rid of the link moer automatic usles in a bean!
  You should take a look at https://blogs.oracle.com/groundside/entry/the_uimanager_pattern and store the values in a uiManager bean that you inject into the bean application scope that manage you the logic.
  I used a xxyyzz bean in the scope of the application to manage the logic

  
  private static ADFLogger _logger = ADFLogger.createADFLogger(Xxyyzz.class); 
  
     public String handleUpload() {
          //Here it can be any business logic validations
          if (getUiManager().getUser() != null && !getUiManager().getUser().isEmpty()) {
              //Gets the file as null if the validation of Date is being triggered once.
              String name = getUiManager().getFile().getFilename();
              _logger.info("Information" + name);
          } else {
              FacesContext.getCurrentInstance().addMessage("it1", new FacesMessage(FacesMessage.SEVERITY_ERROR, "Input is required", "Please enter data"));
          }
          return null;
      } 
  
      public void handleGetFile(ValueChangeEvent valueChangeEvent) {
          getUiManager().setFile((UploadedFile)valueChangeEvent.getNewValue());
      } 
  
      public void setUiManager(UIManager _uiManager) {
          this._uiManager = _uiManager;
      } 
  
      public UIManager getUiManager() {
          return _uiManager;
      } 
  

  the uiManager bean

  
  import org.apache.myfaces.trinidad.model.UploadedFile; 
  
  public class UIManager {
      private UploadedFile file;
      private String user;
      public UIManager() {
          super();
      } 
  
      public void setFile(UploadedFile file) {
          this.file = file;
      } 
  
      public UploadedFile getFile() {
          return file;
      } 
  
      public void setUser(String user) {
          this.user = user;
      } 
  
      public String getUser() {
          return user;
      }
  } 
  

  and the code page of the user interface

  The installation program of the bean in faces-config. XML

  
  
      uiManager
      de.hahn.xxyyzz.UIManager<;/managed-bean-class>
      session
     
  

  the injection into the bean xxyyzz

  
    
      xxyyzz
      de.hahn.xxyyzz.Xxyyzz<;/managed-bean-class>
      request
      
        uiManager
        de.hahn.xxyyzz.UIManager<;/property-class>
        #{uiManager}
      
     
  

  So your use case works as you expect.

  Timo

• Can switch 10, I do refresh of system or factory reset after the update of win10?

  I have the Switch 10 with Win8.1 and think to update to Win10, but no can not find information about refresh/factory reset system after the update. I'll be able to factory reset the tablet to Win8.1 or once updated, all refresh/reset options have disappeared?

  (1) I strongly suggest you to create USB recovery media using Acer erecovery

  http://Acer.custhelp.com/app/answers/detail/A_ID/26287/~/create-a-Acer-factory-default-backup-in-win...

  and you'll always come back to windows 8.1

  (2) after 10 windows upgrade, you have 30 days to return, once placed, you will not be able to go back to using 10 integrated windows option but you will be able to do it using the recovery media

  http://winsupersite.com/Windows-10/how-revert-back-your-previous-OS-after-Windows-10-upgrade

• force password reset after the first connection

  Hi all! I am facing a few problems that I hope you can help me with. I am the authentication of the APEX for my application - and I try to get my request to the user to reset their password after the first use of force. I thought that this should automatically - but is not (even if I use the integrated login page). So, I turn to you to see if you can help understand me what I miss. Thank you for reading!

  Authentication scheme: The authentication of the APEX, with a procedure of login after called check_pwd_reset. The procedure looks like this:

  /*

  PROCEDURE check_pwd_reset IS

  l_host_url varchar2 (1000): = apex_util.host_url ('SCRIPT') | ' f ? p = 53140:500:' | : APP_SESSION.

  BEGIN

  IF (apex_util.change_password_on_first_use (: APP_USER) = TRUE AND apex_util.password_first_use_occurred (: APP_USER) = FALSE) THEN
  apex_util.set_session_state ('FSP_AFTER_LOGIN_URL', l_host_url);

  END IF;

  END;

  */

  Login page: Default 101 - no change

  After (pg 102) login page: 2 password fields and a button "submit". The validation checks to see if the passwords match. If they do,
  then it executes the following process: apex_util.change_current_user_pw(:P500_NEW_PASSWORD);

  At the end of this process, he headed a branch of pl/sql: apex_authentication.logout(:SESSION,:APP_ID);

  Everything seems to work well - BUT my user (configured to change the password at the first login) is ALWAYS prompted to change their password after the first login. It seems as if the call to password_first_use_occurred never is true.

  To observe this behavior, please use customer user and password
  lisaf1: https://apex.oracle.com/pls/apex/f?p=53140:LOGIN_DESKTOP:104844892394198

  I still don't understand why the procedure did not indicate the flag correctly, but support for Oracle has been able to give me a solution. For those who are interested in the future - the solution was to set the workspace setting "require the user account Expiration and locking" to Yes.

  I didn't realize that this setting would influence the requirement for a user to change their password on first use.

• cDAQ material requires a supply reset after the release of VI.

  My LabVIEW program seems very simple. It uses two Express VI, an analog input (NI9219) and the entry of a meter (NI9411). The program works fine until I have stop. Then it will not start again unless the chassis cDAQ (NI9472?) is the power to bike. The program only is there and does nothing. When I reset the chassis and click the button run the program starts and works perfectly. The only part of the program, which is a little unusual, is that the entrance of counter refers to the sample in analog input (AI/SampleClock?) clock for synchronization.  Sample timing mode is 'continuous' for both modules. Why reset chassis doing all it works correctly? How can I eliminate this step?

  Try your JUDGMENT of wiring in the DAQ Assistant as well.  Tasks are implemented for continuous samples and are never actually loaded to stop.  I wonder if somehow that causes a buffer overflow error or something like that and is the cause of lock USB communication.  I would say it should not, but it would be interesting to try.

• File association will NOT be reset after the expiration of the evaluation version

  I used a trial version of Adobe Photoshop CS5. It has expired, however, the default value for jpg files is always set to CS5. I could not get the OS to see CS4 through the default program to help navigate the reset. I can successfully navigate the CS4 exe file, but after clicking on it, the image and action, that the two still call CS5 as the program to use.

  Hello EJ Neilsen,.

  I thought I might suggest suggest the following to see if it makes a difference.
  Go to default programs, click Associate a file to a specific program Type. Then define Associations for .jpg default Windows Photo Viewer, reboot and then go back and see if you can change it to CS4.

  Please answer back with an update.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Factory reset after the removal of the system recovery partition

  Hey I had deleted my recovery partition because windows limit 4 partitions and I used all the others... I can still do a factory reset now if something is wrong? Or can I create a disk recovery or something?

  Just use Windows recovery integrated to do the backup, it is free and works well. The backup is a full system image & recover as mobile in the exact configuration is in at the time of the creation.

  A clone of left player would do the same thing & tends to be much more relible HP recovery & free.

• BlackBerry smartphone password reset after the end of support

  I have no more phone support.

  My old password does not work.

  I can't get my ID blackberry for work.

  I want to just this device to open.

  This means that you have your employers device, they have you removed from their network and forced a new password to you. You can call to ask what is the password.

  BUT, probably, their intention to reset the password is for you to do a wipe of the device security so that none of the persistent employer email, data, etc., remain on this device.

  After clearing security, you end up with essentially a new, fresh, device with no previous, ready to install as a personal device data.

  Read this article from RIM's Knowledge Base to reset your device to factory settings.
  KB18998 How to reset a factory default BlackBerry smartphone

  See the article in the Knowledge Base RIM here for more information about how to remove an it strategy. See method 3 in the link:

  KB14202 How to remove a policy from IT to a BlackBerry smartphone

• link: new values on after the trigger by using dynamic sql.

  Hello all I have a problem I want to solve using dynamic sql on a trigger. The problem is that are around 5 qty fields who each have 18 separate fields. This is because of different sizes (S, M, L, XL, etc., up to 18). So I will try to use the: new values on a trigger to dynamically fill these information on a table, but immediate execution is run is returning the value like: new.open_sz (x) instead of the actual numeric value of the column. See code below. Is there a way to do this.
  
  Thank you in advance.
  
  
  CREATE OR REPLACE TRIGGER T_EXAMPLE
  after update of
  open_sz1, open_sz2, open_sz3, open_sz4, open_sz5, open_sz6,
  open_sz7, open_sz8, open_sz9, open_sz10, open_sz11, open_sz12,
  open_sz13, open_sz14, open_sz15, open_sz16, open_sz17, open_sz18
  on order_li_m for each line
  declare
  Is of TYPE NumArray table indexes number directory;
  NumArray v_orderqty;
  -TYPE VarArray is the table of the varchar2 (200) index directory.
  -v_orderqty K_A2KSTD. VarArray;
  v_col varchar2 (30);
  v_sql varchar2 (1000);
  BEGIN
  for a 1 in... 18 loop
  v_col: = ': new.open_sz' | one;
  v_sql: = ' SELECT: 1 double ';
  run immediately v_sql in v_orderqty (a) using v_col;
  dbms_output.put_line (v_orderqty (a));
  end loop;
  end T_EXAMPLE;
  /

  Raffy Martin wrote:
  Is there a way to do this.

  You may not use: news and: old identifiers in dynamic SQL, the way to do it is to specify the real column names.

• User password resets after the computer restarts

  I log into admin account change the password to another account (2) (another admin account) I disconnect 1 Admin account and sign in to the account number 2.   The password works.   However, if I restart/turn off the computer the password does not work on the account #2.   I set it up so that the log information is controlled by another computer.   However, I can not locally connect you to the computer after it restarts as she forget this password is assigned.   1 account works well with its unique password.  Account 2 (the car connection) doesn't work.

  Windows 7 Enterprise 64-bit
  AMD athlon II x 4 635 clocked at 2.9 GHZ

  Have you checked the forums Smartlaunch or knowledge base?

  http://www.Smartlaunch.com/support

• difference of initial value of string between the steps in the process and an external instance of LabWindows/CVI

  Hello

  I'm curious to know what I see using TestStand, LabWindows/2013 2013 with regard to initial in TestStand string values when you perform the steps in the process or an external instance of LabWindows/CVI.

  I have a step (CVI) string value that is used to check an array of characters stored in an EEPROM to test.  I pass on the Step.Result.String in the CVI by reference.  I then read the table charater of the EEPROM in the chain (Step.Result.String).  The string is then compared against the limit as specified in the test step breast.

  When I run this test step to perform the steps in the process selected in the popup Configuration of the adapter of LabWindows/CVI, it seems that the memory allocated for the string is filled with null characters.  Which is what I expected.

  When I run this test step to execute the steps in an external instance of LabWindows/CVI iselected of the Configuration of the adapter of LabWindows/CVI popup, it seems that the memory allocated for the string is filled with something else.  That is not what I expected.  For example what I see in the memory, it's the first characher is one byte NULL but the remaining bytes are some other values, as shown below:

  F0 00 AD BA 0D F0 AD BA 0D F0 AD BA 0D AD BA 0D AD BA 0D BA 0D AD F0 F0 F0
  F0 AD BA 0D F0 AD BA 0D F0 AD BA 0D F0 AD 0D AD BA 0D AD BA 0D F0 F0 F0 BA...

  In my code I make sure to write a null character in the following location table charater I just write in the chain so I have no problem with the test is working properly.  I have remove the writing from my code null character and was able to verity that the test passes when executing the steps in the process and fails during execution of the steps in an external instance of LabWindows/CVI.

  The returned string contains what I wrote for her, and then the rest of the string is filled with the values that are in the memory allocated for the string.

  Here's my Question: is this the expected behavior for the original string values in TestStand between both types of stage performances?

  Thank you

  Chris Young

  In general teststand not Initializes the unused portion of the string buffer, so it is expected that the values of the memory after character no endpoint will be different, or even to each call. If you happen to be get zeros after the null terminator which was probably due to random character (i.e. the memory allocated just arrived already having zeros in there) or perhaps a debug setting you use perhaps in the Visual C runtime (if you are debugging the process in visual studio or modify visual C runtime heap parameter). TestStand is not initializaing memory after the null terminator character in both cases (I checked the code).

  -Doug

• How can I force a reset of the device?

  My code crushes several modules and also makes changes to the Group module that contains these modules.  I then calls CodeModuleManager.promptForResetIfRequired (), but the BB do not think that a reset is required.  (I also called CodeModuleManager.IsResetRequired (), and he returned false.

  However the new modules I've written are not taking effect until after the BB is reset (I've tested by removing the battery).

  How can I force a reset of the device from my Java code?

  Thank you

  Paul

  Take a look at this thread. You might get an idea.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=13762#M13762

  Concerning

  Bika

• Is it allowed to use property value nodes?

  To remove the problems of spaghetti, I need to delete rows.

  Previously, I used local variables, but the values written to local variables could not be found in time.

  So I started using nodes of property value instead.

  Are safe as substitutes to the lines?

  CITA wrote:

  To remove the problems of spaghetti, I need to delete rows.

  LabVIEW includes wires, no lines. What do you mean by "need". WO is you force?

  The program work correctly?

  So you have beautiful, clean and narrow (son) 1 d elements and that you want to replace by larger elements 2D (local variables, the property value nodes) across face significantly more chart area?

  Because you now also remove the dependencies of hard data, you probably need to add sequence structures, to keep racing in failure conditions. This will clutter the diagram even more! Why do you think that is the solution to your problems?

  Basically, you replace spaghetti with something worse still, for example, the content of the dumpsters behind an Italian restaurant after a night occupied.

  CITA wrote:

  Previously, I used local variables, but the values written to local variables could not be found in time.

  What is your definition of "appropriate"? The use of knots of property and local variables does NOT accelerate your code. In fact it will make it slower. As mentioned, race conditions can indeed retrieve outdated values before they have been updated to the current values elsewhere, so "timely" could easily turn into "too early."

  If you have performance problems, you don't want to chop the code and become even more fragmented.

  CITA wrote:

  So I started using nodes of property value instead.

  They have exactly the same problem as local variable, but are more demanding on resources. What was your thought process, perhaps?

  CITA wrote:

  Are safe as substitutes to the lines?

  Yet once, LabVIEW didn't 'lines', except in the range of decoration. Local variables and property nodes make code significantly less safe, because they make them much more difficult to find and avoid race conditions. They also make debugging almost impossible.

  You can start from scratch with a design template set and a code well structured and hierarchical.

  If you still think there are too many wires, consider using clusters and berries. Dozens of scalar son can replace a single cluster thread. A multidimensional array can carry millions of data points in a single thread. You get the point!

  It is difficult to give advice more targeted without actually seeing some of your code. Feel free to join so we can give more specific comments. There are many examples here in the forum where we were able to copy the HTML code to 10% of the original size while making it faster and cleaner at the same time still to add additional features. All this without the need for local variables and property nodes.

• Test bench set property Value.vi - error 97

  I get error 97 test bench set property Value.vi.  I posted my code as an attachment.  AMP - PW FG1 - 1A_SPS.vi is the main VI.  The cluster of error can be seen in the .bmp file.

  Thanks in advance.

  I think that my problem was that I ran the VI outside TestStand.  When I ran the TestStand sequence called the VI, I had no errors.