Text input focus and submit button - issue 8 slides-Captivate

Similar Questions

• passing a value line selection and submit button

  I created a page jsff divided into 2 parts
  Part 1 - contains the table, and on the selection of rows in this table, I want to pass a value to enter text from another jsff page (which is in the second part of the page) and offer a button
  Part 2 of a region
  region contains a page jsff containing an input text and submit button
  
  
  So what I want to do is
  on the selection of lines in the above table I want to copy a column value to enter a region below text and also submit a button
  
  
  Help, please

  If the two regions share the same control of data you could do so declaratively. check this one... http://andrejusb.blogspot.com/2010_04_01_archive.html

• CP9: Multiple text entry boxes - 1 Submit button

  Hello

  I have several text entry areas (TEBs) and send button 1.

  Each TEB I have a:

  • input variable of text from the user - v_teb1 (associated with the ETB).
  • Variable for the correct answer - v_teb1_ans (do this way because I want to reuse the action advanced)

  I created an advanced action (assigned to the "submit" button) to check the entry of user against the answers.

  So if the answer was 'Home' or 'House' - how can I test for it - create two response variables - "v_teb1_ans_a", "v_teb1_ans_b".

  Is there an easier way?

  Also with "Validation of the user" are the "correct entered" used only with 'Success' and display the success, legends of the failure

  that is when submit button displayed for each TEB, auto-submit is enabled, the Enter button is used?

  Concerning

  Donal.

  Donal salvation,

  This is the problem with the validation of a TEB entry using a tip action, there is no way to disable the distinction uppercase / lowercase. It will be possible if you use JS to change the answer to all the capitals before checking it in.

  I do not understand your last question, sorry? Entered correct are used if you post a BER, but in your case the validation is made only after all the TEB were used, right?

• Remove the text input Focus

  Hi, I have a text with a validation of user input, I have a group above that TEV thatžs and show or hide according to the click of a button, on both situations, hide or show, that the s of entry text below the flashing of the Group keep´s, I tried some shots, without a bit of luck.

  • Created two text input area. (does not work)

  • Created a clickbox. (does not work);

  • Change the tab order. (does not work);

  If I have an object on top of the TEB, it must be hidden until I hide the object that s a fact, right?

  

  I use a script to hide the visibility of the object, fixed through css.

• Next and submit buttons - question slides

  Hi all

  I see some problems using with the following buttons on question slides provided with Adobe Captivate 6.0, and send it.

  	Desired behavior	Actual behavior (out of the Box)
  Entering the slide	(Behavior at the entrance of the cylinder head is OK)

  • Next button is disabled (grayed out)
  • Introduce the button is enabled
  • "Back" button is disabled

  (The same as the desired behavior)

  • Next button is disabled (grayed out)
  • Introduce the button is enabled
  • "Back" button is disabled
  On the presentation of a correct answer
  • Next button is active
  • Introduce the button is disabled (grayed out)
  • "Back" button is enabled
  • The user should click on 'Next' to continue, or click 'Back' to return to the previous slide.
  • Next button is disabled (greyed out) [ISSUE 1]
  • Submit button is activated (standard color) [issue 2]
  • "Back" button is enabled
  • The user must "click anywhere" to move forward (full page of hand cursorover). This means, if the user tries to click on return they will go to the Next is not the previous slide
  . [Issue 3]On revisiting a question slide (screening)
  • Next button is enabled
  • Introduce the button is disabled (grayed) or invisible
  • "Back" button is enabled
  • The user should click on 'Next' to continue, or click 'Back' to return to the previous slide.
  • Next button is enabled
  • Submit button is activated (standard color)-, but does nothing to click [issue 4]
  • "Back" button is enabled
  • The user should click on 'Next' to continue, or click 'Back' if they wish to return to the previous slide.
  On revisiting a question (for review) slide
  • Next button is enabled
  • Button "submit" is disabled (grayed) or invisible
  • "Back" button is enabled
  • The user should click on 'Next' to continue, or click 'Back' to return to the previous slide.
  • 'Back' button on questions 1 to be disabled or invisible or take the user back in the contents page.
  • Next button is enabled
  • Introduce the button is disabled (grayed) or invisible
  • "Back" button is enabled
  • The user should click on 'Next' to continue, or click 'Back' to return to the previous slide.
  • The 'back button ' on Question 1 is activated and directs the user to the previous content that is confused page. [issue 5]

  Issues related to the:

  1. Are there settings that are the origin of this undesirable behaviour?
  2. Or, is it possible to bypass them? It seems a lot of work to have to rebuild the behavior of quiz!
     1. Problem 1: I could create a custom button 'Next', but I can't see any sort of hook in the submission process to trigger it to be enabled / disabled.
     2. Issues 2 and 4: I could create a custom of 'Submit' button but I don't see what measures to trigger to submit the quiz question.
     3. Problem 3: I do not see boxes click to remove or settings to change, to stop the behavior "click anywhere.
     4. Problem 5: I worked around this by creating my own back for Question 1 only button and hide when they review the quiz.

  Any suggestion would be great!

  Thank you

  Sarah.

  Hi Lilybiri

  Thanks for the links to your blog, as always very useful!

  I understand the hesitation when seeing convoluted questions on this forum, but I encourage you and others to try to remedy. Otherwise, the forum is pretty useless if it only meets the "simple" questions I tried to unzip the problem so that the expected and actual results were clear.

  I have now overcome problems 1, 2, 3 and 4 as follows:

  • Make the button submit transparent and placed a SmartShape resembling to the button send behind it.
  • Removed the success message, so that the action on the success is called immediately by clicking on Submit
  • Call a tip for the successful event Action. This action:
    • Displays the revision message (success)
    • Hide the submit button
    • Jumps to the next slide and then return to the current slide (this ensures that the buttons next and previous are enabled correctly)
    • Calls a Javascript function to pause the slide.
  • Apply the same to all my slides in question... * sigh *.

  I had already worked around 5 problem according to my original post.

  Again, I want to express some frustration that there are so many workarounds to get training to watch 100%. For example, in one of your tutorials there is a transparent button and once I knew how the workaround has been applied, I put my mouse over it the space where the button was and saw the hand icon. While if you think that users don't notice, I assure you that when the courses are distributed to a few hundred people these things don't go unnoticed! The effort to build workarounds is worsened by having restrictions on question slides that do not apply to other slides, which for example not being able to add a button and having to use a SmartShape (which does not reuse the button styles), etc. That means trying several solutions workaround until you can find one where all the workaround steps are feasible and you can get a perfect result.

  In any case, I'll mark this message as answered and call it a day (I have another question about styling SmartShapes used as buttons but post it separately) =)

  Thank you

  Sarah.

  

• 'Forward' and 'Submit' buttons in Quiz confusion

  Hi all

  Recently, I created course in Captivate with little Quiz at the end.

  And now, I received the comment by the user, but actually not sure how I can solve this problem.

  In fact, what he writes, is that he inadvertently used the "Forward" button / the appearance of the player instead of 'submit' to all questions, so in the quiz results, he scored 0%, and that's why to return back and redone the test again once, which was counted as 2 attempts. His question is: is it possible that you can bind these two buttons as well as others don't make the same mistake?

  Before the test, I also provided a slide with instructions which, after having chosen the answer user must submit to see the legend as your comments, but to navigate to other slides - next button.

  This is why I don't really understand how to adapt my classes to this comment by the user. Because the buttons 'Next' and 'Send' can completely separate functions.

  Maybe there is a possibility to freeze the Forward button (don't let don't not to go to the next slide), until the user has not confirmed the answer with the "submit" button?

  PS: if I understand it, "You must answer the question before you continue" legend works only when the user click on send selected unanswered.

  Please, suggest...

  Thank you!

  I recommend especially to hide the PlayBar during a quiz, just to avoid this kind of problems. You don't say which version are you using? Captivate the 6 and 7 have an option in Quiz preferences to hide the PlayBar during quiz.

  In regards to the button 'Next', that points stem to and other features of question slide, take a look on:

  http://blog.lilybiri.com/question-question-slides-in-Captivate

  http://blog.lilybiri.com/question-question-slides-part-2

  Lilybiri

• Issue using 'Next' and 'Back' buttons on a slide.

  I have 4 paragraphs I want to display on a single slide. To progress, the player selects the button "next". Each paragraph has a 'Next' and a 'Back' button to allow the reader to go any direction and read or reread the material. Once selected the last button 'Next' button 'Continue' ('Let's Take a Closer Look") is set to appear. The "Continue" button should be the only button that allows the reader to go to the next slide. However, once the buttons 'Next' have been selected several times, the blade continues to work and goes to the next slide. Each button Advanced assigned Actions. I can download these images as well. Because now I downloaded an image of Action Advanced 'Next' button and a 'return' image of the Advanced Action button you can see how I course set up.

  

  First paragraph

  

  Second paragraph

  

  Third paragraph

  

  Paragraph of Forth

  

  Chronology

  

  Button Next tip Action

  

  "Back button" tip Action

  Hello

  Have a working example. I created four containers of text T_one, T_Two, T_three, T_Four and grouped in Gr_T.

  Created a v_track variable user, with an initial value of 1 (because the first text is visible when starting)

  Created Bt_Next (visible) and Bt_Back (initially invisible) buttons with a break point at 1.5 sec (later will be for you if you want to first allows you to hear the audio clip).

  Created the Bt_Cont (invisible) button with a break at 2 sec (later than the other two).

  Here is the chronology:

  

  For the next button, created a conditional action advanced with three decisions. Here's the first, which must be the first (logical) decision and when the third legend is visible, v_track = 3:

  

  You can send me a private message with an email address if you want to see the others.

  For the previous button, sequence is reversed, here's the first:

  

  Lilybiri

• Signature field and submit button does not

  I've recently upgraded to LiveCycle Designer ES2 and problems with certain features.  I created a form with 3 fields of signature and a send button for the final signatory to email on the back of the form.  None of the signature fields works; or not the submit button.  I did everything the same as I had in the previous version of the software.  However, it seems that there are a few changes that I know.  I read about locking objects, but got a little confused.  Can someone tell me (in very lay terms) what I need to do to get these functions work?

  I don't see a screenshot. If you have tried to contact by e-mail, that it won't work, you need to use the interface of the forum.

  In any case, to enable a document depends on which version of Acrobat you are using:

  Acrobat 8: Advanced > enable usage rights in Adobe Reader

  Acrobat 9: Advanced > extend features in Adobe Reader

  Acrobat 10: File > save as > Reader Extended PDF > activate additional features

  Acrobat 11: File > save as other > Reader Extended PDF > activate tools plus (includes filling form & save)

• the color of blue default text input focus

  What is the property to change the default color of the development of the components of area text input and text (the light blue color around them). I guess that there is a property css or something, I just have not been able to find.

  Have you looked at the Flex Style Explorer? It is extremely useful to see what can be done and how do something with styles.
  http://examples.Adobe.com/flex3/consulting/styleexplorer/Flex3StyleExplorer.html#

  Tracy

• Submit button issues

  I have various problems with my button "submit" on Acrobat XI using a PC.  I'm trying to publish it on a Web site.  Users can fill in with Chrome, but can't submit - button not responding.  Users must download the form, if you use Firefox.  They can fill it out on this browser.  Also, I put the action to submit to be on the mouse at the entrance.  The continuous form "submit" every time that my mouse scrolls above the button.  Am I missing something?  I'm kinda new to active forms.  Thank you!!

  You must use the event mouse up, not mouse enter.

  You have configured submit button to send to a web server or if you use a type mailto URL?

• When I click a link, that it disappears if the info is there and submit buttons on Web sites aren't there Tho ' info is.

  Links always disappear when they were clicked on Tho ' info is always there if I remember where the link. Web sites such as correspondence and credit cards missing submit or continue buttons.

  Thanks cor - el. I went to control panel accessibility and not he. Everything is fine now. What a relief!

• bbui text input focus

  Someone at - it an example showing how to set the focus on a text entry box using the bbui.js framework? Everything that I've tried up to now does not work. Thanks in advance for your help.

  I test this for smartphones. Here is a comment from Tim Neil in another thread that explains why it's happening.

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/focus-navigation-mode-too-slow/m...

• How to make a slideshow of heroes with the text and the button for each slide?

  I'm trying to make a basic slide show (auto no buttons) which will be the width of page 100% and I want each picture to have a title and a status button they can click to access other pages, for the life of me I can't this is! What I am doing wrong?

  Indeed I could solve my problem, yay 2 + hours of troubleshooting finally paid off!

  I tried the white color text and read 'Check this video now!', but the background was a color of the light, so it is in contradiction with the white text. To remedy this problem, I created a rectangle shape, he made black and reduced the opacity to 40% and threw it behind the text. In order to get the button under the text that says: 'Click here'! I was able to use a copy + paste glitch by sticking the trio in the caption text box for an image, thus allowing me to have a unique caption for each photo in an automatic slideshow. The problem arises due to the notion of a chart of the icon to stay on the text no matter how it is pasted into the text box but I could understand that if you group the text above the rectangle elements before pasting in the text area of the legend, then the text will remain on the chart! Yay problem solved (at least for now)!

• Submit button issue

  I added a button for submitting a form in LiveCycle Designer, and even if I choose 'Save as static pdf', when I hit the button submit, the form that fits on the e-mail is an XML document rather than pdf. Is not it will cause problems if our goal is simply that our recipeints download the form on the Internet, fill it out and send it to us? Aren't docs xml for more sophisticated presentations, online, rather than e-mail?

  

  There is no relationship between the format of the saved PDF form and send. In addition, there are two form objects that can be used for presentation, send Email and button button. The button can be configured to send a PDF, the XDP XML and URL encoded data. You have selected the button send email and is the default behavior for the Send button to attach the XML form to an e-mail.

  Steve

• Buttons on quiz on slides and submit

  Hello

  I have the clear defect, back, Next buttons and submit on my quiz slides.  My users tend to click the next button instead of the Submit button or click on the "submit" button, and then the next button, thinking they need to click next to continue.  I discovered that in these cases, the results of the quiz are not captured.  I understand that the user must click on Submit and not on the next button in order for the results to be captured. I tried to change this behavior through guidelines, but there are always a few who want to click Next.

  I like to keep the buttons back and next, because they are used during the review of quiz.

  Do you have any suggestions for me that my instructions by adding to each slide that says "do not click Next in all except if you review the quiz"?

  Thank you

  Sarah

  Little weird that you marked your own comment as a "good answer".