Text of loading files Business Modeler Demantra

Similar Questions

• S.O.S.      Error #2044: Unmanaged by the IOErrorEvent:. Text = Error #2124: loaded file is unknown

  I'm doing a site web flash with

  Flah cs3 as3. power was perfect, but the codes to replay

  get crazy.  There is a photo gallery that has little thumbnail photo on the right, and when one of them turned on, this picture is loaded SWF and appear in large size on the left. today because I have the setting codes last few things gave me errors...

  Error #2044: Unmanaged by the IOErrorEvent:. Text = Error #2124: loaded file is an unknown type.

  types of Elf, I changed I saved pictures in jpg, jpeg, bmp, png. but nothing works.

  Please help me cause I have to finish in 3 hours.

  If your image loading code is attached to a frame which plays more than once, you will have this problem.  If this isn't the cause, show your code.

• Could not load file or assembly ' NationalInstruments.VisaNS, Version = 8.9.20.108

  I have an app VS c# that references the assembly OR world.  It worked fine in 32-bit Windows XP environment.  However, when I installed and ran the application in the Windows 7 64-bit environment.  The app was the following text:

  System.IO.FileNotFoundException: Could not load file or assembly 'NationalInstruments.VisaNS, Version = 8.9.20.108, Culture = neutral, PublicKeyToken = 4544464cdeaab541' or one of its dependencies. The system cannot find the specified file.
  "File name: ' NationalInstruments.VisaNS, Version = 8.9.20.108, Culture = neutral, PublicKeyToken = 4544464cdeaab541"

  Where can I find this assembly file version and why did not he ask you when I ran into the Windows XP 32-bit platform?  It's the same application binary.

  Thanks for your help!

  Another reason, you can get this error if you have your target, the value 'Any CPU' platform in the project properties. "Any CPU" setting causes the application runs in 32-bit on a 32-bit system and 64-bit on a 64 bit system mode. It would be a problem or a 64-bit system because you don't have the 64-bit installed assemblies and a 64-bit application cannot load a 32-bit assembly. You must change this setting to 'x 86' which will force to run in 32-bit mode on 32-bit and 64-bit systems.

• How can I fix error with package installed: "could not load file or assembly ' NationalInstruments.Daqmx.dll

  I'm fighting this problem for days (euphemism)...

  I used to work, but now isn't an installation package.  I tried to install and run the program on a couple of computers and the program hangs when loading the Dll NI.  I put everything ' x 86.

  The list of dependencies in VS2010 is illustrated in the attatched screenshot.

  The text of the mistake of trying to run the application on the target computer is lower in italics.

   

  Of course, I could use some help on this!  Thanks in advance.

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.IO.FileNotFoundException: Could not load file or assembly 'NationalInstruments.DAQmx.dll' or one of its dependencies. The specified module could not be found.
  File name: "NationalInstruments.DAQmx.dll."
  at IPClientTest.MTF_Supervisor.mainSstart13)
  at IPClientTest.MTF_Supervisor.mainStartByParts)
  at IPClientTest.MTF_Supervisor.lblSelfTest_Click (Object sender, EventArgs e)
  at System.Windows.Forms.Control.OnClick (EventArgs e)
  at System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)
  at System.Windows.Forms.Control.WndProc (Message & m)
  at System.Windows.Forms.Label.WndProc (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

   

  Loading assemblies *.
  mscorlib
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.34011 built by: FX45W81RTMGDR
  Code: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
  ----------------------------------------
  MTF_Supervisor
  Assembly version: 1.0.3.3
  Win32 version: 1.0.3.03
  Code: file:///C:/mtfDebug/MTF_Supervisor.exe
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  System
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.34003 built by: FX45W81RTMGDR
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  MTF_ClassLib
  Assembly version: 1.0.1.0
  Win32 version: 1.0.1.0
  Code: file:///C:/mtfDebug/MTF_ClassLib.DLL
  ----------------------------------------
  NationalInstruments.UI.WindowsForms
  Assembly version: 13.0.40.242
  Win32 version: 13.0.40.242
  Code: file:///C:/mtfDebug/NationalInstruments.UI.WindowsForms.DLL
  ----------------------------------------
  NationalInstruments.UI
  Assembly version: 13.0.40.242
  Win32 version: 13.0.40.242
  Code: file:///C:/mtfDebug/NationalInstruments.UI.DLL
  ----------------------------------------
  NationalInstruments.Common
  Assembly version: 13.0.40.188
  Win32 version: 13.0.40.188
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/NationalInstruments.Common/v4.0_13.0.40.188__dc6ad606294fc298/NationalInstruments.Common.dll
  ----------------------------------------
  System.Web
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.34009 built by: FX45W81RTMGDR
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_32/System.Web/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Web.dll
  ----------------------------------------
  System.Core
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
  ----------------------------------------
  NationalInstruments.Common.Native
  Assembly version: 13.0.40.188
  Win32 version: 13.0.40.188
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_32/NationalInstruments.Common.Native/v4.0_13.0.40.188__dc6ad606294fc298/NationalInstruments.Common.Native.dll
  ----------------------------------------
  System.Xml
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
  ----------------------------------------
  System.Design
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/System.Design/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Design.dll
  ----------------------------------------
  Accessibility
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
  Code: file:///C:/windows/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
  ----------------------------------------

  Salvation Lorne.V.,.

  Exactly how you install OR DAQmx on the target computers?  Even if you include the DAQmx merge module in your version, you always need to install DAQmx on the target machine separately.

  You can also confirm that the DAQmx.dll is installed in the same directory on the development and deployment of the machines?  And you have the same version of DAQmx on both machines?

  Kind regards

• He saids load files from memory to print later in my print spooler how to get out or remove it

  my printer will not print when I services, then in this print spooler TI saids load files into memory to be printed later.how have removed that my printer can print

  Hi Jorgecajigas,

   
  1. What is the operating system installed on your computer?
  2. What is the brand and model of your printer?
  3 is enabled, the print spooler service?
  4 are you facing this problem with a particular application?
  5. you receive an error message when you try to print?
   
  You cannot change or remove the description of print spooler. The message you get in the description box is just tells you what the purpose of the service. To solve the problem on the printer does not print you can follow the steps and check if it helps.
   
  Follow the link and check if that helps.
  Printer in Windows problems

• Windows is loading files... stuck not start disk

  Hello, I have a Server 2008 OS and im trying to install it.

  It is a clean server with literally nothing about it. Pervious OS was Redhat.

  While trying to start the server will automatically try to boot to the CD after he tries to boot from everywhere else, but the problem is that it will not load the CD. Stuck everything when trying to load the CD "Windows is loading files.

  The strange thing is I took another computer with the same exact hardware and the previous operating system as this computer and installed OS 2008 very well. This server is supposed to be just to be a "Back-up server.

  If you guys can think of anything please let me know... Thank you!

  Zero clean up the hard drive. I had the same problem after RedHat installed several years back.

  Hard drive test - CD Bootable:
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD
  For Western Digital disks using WdDiag: http://support.wdc.com/product/download.asp?lang=en
  Fujitsu utilities: http://www.fujitsu.com/us/services/computing/storage/hdd/support/utilities.html
  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using the homegroup.

  Group residential slow and other problems with it

  Hello!

  I have 3 Windows 7 PC-s (office #1, #2 desktop and laptop). I created HomeGroup and join all computers, so I can access the files on each of them. But my problem is the following: homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using homegroup, because it is slow and every two seconds of loading film. And also needed a few minutes to open the pictures (more than 10 GB in all folders) to a folder in the other PC. Why is this work so slow? I don't think there is a problem with slow wireless router, because I can replace my old Linksys WRT54GL Linksys E4200, which is able to transfer video HD 3D such as Linksys provide. What should I do to fix this? Should I change all the settings in Windows, perhaps in the router...?

  And why my laptop is not always visible to the other PC to homegroup? He see two others and two other sees, but they are not portable. This happens sometimes. But then I still share with homegroup libraries to my laptop and there still other computers see it and all shared libraries. Where is the problem? I also try to change the HomeGroup services automatically, but this does not solve the problem.

  If I forgot something to write, or you need more information, do not hesitate to ask.

  I'd appreciate any help really.

  Hello

  Manually check manufacturers sites WiFi because pilots offered through
  Updates Windows will most often not be later (MS is far behind certifying)
  drivers and many manufacturers do not quickly submit newer versions or not at all). See
  Manual driver update of the methods below.

  The question could be WiFi in fact however try to device (hardware)
  update the driver first.

  What antivirus/security is used? Some of those who will cause problems with the
  Homegroup. Since it happens more often on a single computer that on there
  a check.

  From this link:

  Homegroup: frequently asked questions (also shows how delete and remove homegroup)
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  "Only people who belong to the homegroup can see shared libraries. You can also share libraries or files and individual folders with specific people in your homegroup, rather than share them with everyone. For more information, see libraries with your homegroup sharing and keep files and folders to be shared with a specific residential group. »

  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  ==================

  How to upgrade manually the drivers:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
  7 love the updated drivers.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to check if the text is loaded?

  Hello. I wonder if it is possible (in AS3) to check if the text is loaded in dynamic text field (from the external file).

  Any ideas?

  Concerning

  Hello

  Run an ENTER_FRAME event and check the size of the textfield object.

  addEventListener (Event.ENTER_FRAME, checkText, false, 0, true);

  private function checkText (event: Event): void

  {

  If (textField.text.length > 0) {}

  removeEventListener (Event.ENTER_FRAME, checkText);

  game of TextField

  }

  }

  Better to use the TextField object's CHANGE event.

  Hope this helps

  Best regards

  Etienne Das

  http://deepanjandas.WordPress.com/

• XML - text form loading external text contains special characters

  Hi @ all...

  in my projects, I often use xml files to load external text that I can format it in css and it worked fine until now...

  I have a site that I am prograaming in Italian and German and in both languages, there are amount of text that contains special characters like ' to' 'o'' 'e' 'u' 'a' 'u' and so on... the problem is that when I write a text with characters in xml file when the text is loaded into this flash of special characters are not recognized , and instead of them appears a small square...

  I tried to load the text from a html instead of an XML file (because in HTML, I know how to write these special characters and let them display right in my pages html... for example = & agrave; but not way... the flash now loades the text & agrave; instead of to...)

  How can I solve this problem?

  a big thanks to everyone!

  Hello

  You should probably incorporate the fonts that you use in your FLA file before you publish the SWF file. Just go through the steps in the video @ http://blip.tv/file/2357619 if that helps.

  Thank you!

• Rename the business model and business sector

  Hi friends,
  I want to change the name of my business model and also the area in question.
  If I rename in RPD's business model and so as my presentation files it will be affact my reports already made?
  
  If so, how to solve this problem.
  
  Help appreciated.

  It's expected OBIEE behavior, Alias only supports existing reports, running, but when you want to edit reports, you must use the Advanced tab, change. Then only the columns/tables available on the left side.

  -Madan

• Problems with showing all text in pdf file

  Hi all
  I have this problem. When I download a pdf file on the Web site of our company as a link and then when I open the link, most of the text in the file is as symbols. The pdf file is a brochure and is exported from CorelDraw. The brochure consists of photos and text. For me, very important is to solve the problem, because most of our customers use Mozilla firefox and they must be able to see everything on the brochure.

  Thank you in advance.

  Best wishes

  Martina

  Hello again, yes the development version of the pdf viewer addon is a snapshot at the beginning of what will go into future versions of firefox. so when the display problem is not obvious in the version of the pdf viewer dev, this means that no bug must be filed and the solution is already underway to enter in the next update of firefox.

  I can't give you an exact date on what will be your problem in firefox, because without a real pdf taste it is not possible to know what bug caused the problem. However, according to the pdf.js developers a difficulty which is already present in the current version of the developer at least will make in firefox (scheduled for the end of April) 29.

  you could test yourself if the problem is still present in firefox (beta) 28 or 29 (aurora) firefox: https://www.mozilla.org/firefox/channel/

• Windows is loading files...

  This has happened to me for a while now.

  I start the computer, if I forced mode it asks if I want to get into the Safe Mode, Mode safe mode with networking or normally.
  I usually go on the network in safe mode, because of the error on blue screen on Normal I have to fix ABC.
  He says "Windows is loading files", does microsoft thingy loading then the screen becomes larger, as if it was in safe mode, but it will start up repair.

  ... Research of the problems... Windows cannot repair this computer automatically... For the 40th time. "If you have recently attached a device to this computer, such as a camera or music mobile game -" Hey... I just want to play Xbox Live.

  I'm done, it restarts and repeats continuously.
  I tried all the stuff the other forums effing threw on me, but they were not much help.

  It's the Toshiba forums, I should have here tried everything first... but can someone PLEASE help me?

  Hello

  Using Win 7?
  Usually the Win 7 and Vista as well supports some repair options.
  Start Notepad, press F8, and then choose the first option called fix my computer.
  There you should find some settings of repair.

  I worst case you could recover the laptop using a HARD drive recovery option (located in the repair of my computer if available) or you can use your Toshiba Recovery disk to reinstall the operating system.

  Welcome them

• HP XW6400 problem loading Vista Business

  Hey all,.

  I just took a XW6400 on Ebay and the auction has just declared that he only started the bios configuration screen.  I literally have no idea of the State of functioning of the parts below.  Here are the following specifications:

  4 GB RAM (has not considered whether it is ecc or not)

  Single XEON 5130 (2.0 ghz)

  ATI x 1300 video card

  40 GB SATA hard drive

  SATA 200 GB HDD

  DVD Rom

  DVD Writer/Rom

  Latest version of the BIOS: 2.38 (with the default values loaded)

  Part number: RB318UT #ABA

  Serial number: xxxxxxxxxx

  I use the computer for mainly surfing the net, playing some older games, but absolutely nothing of what the computer was destined (all resources, graphics intensive applications, etc.).  It's going to be my computer shop for internet research on how to fix pinball machines.  I am using computers for 30 years, so aware of all material am but not at a technical level of COMPUTING.  I can take pictures, or perform diagnostics that help solve this problem and post it here if necessary.

  I'm having a lot of trouble with a very slow loading Vista Business x 64 (ISO DVD created vistax64.com image).  It literally took about 8 hours now, from one day to the next, and I'm finally in the "Complete the Installation" installation (the progress bar green to low is about 75%) and he's been there 45 minutes now, but it could be longer, just noticed this after waking up and controlled again.  I would appreciate help with the following questions:

  #1: loading XP pro, the system stops just to the material 'verification' screen and locks upward.  Could be a problem with the Vista question above?

  #2: is it possible to load Windows 7 Home Premium on the machine, as well as the edition of Vista Business no?  The installation will simply not work on the machine if you use the standard version of Vista?

  #3: when you use the NON ecc memory, the computer performs strangely like that?  It is absolutely a requirement of memory ECC FB when not to use applications requiring?

  #4: if it finally load on the system and the system seems to work ok, is this slow loading problem a precursor to everything that you guys can imagine of?  Or I was just in the hospital?

  #5: when you add another processor, read the code of the same batch of CPU guarantees compatibility for a two-way configuration?  Or can I just get any other Xeon 5130?

  #6: I don't have a floppy drive on the system, but you guys can recommend a good hardware bootable USB or CD/DVD test software, which is a freeware if all goes well?

  #7: I lent my copy of Vista professional before, so I guess it's possible (but unlikely) someone could use the certificate of authenticity.  The installation say he is recorded online for you.  Is it possible that the copy has been used and is already registered to someone else?  Which would explain this problem?

  #8: is it possible to get a CD of HP restore again?

  I did the memory test on the Vista installation CD, and it passes.  I also shared my GForce 9800 GTX video card and am having the same problem.  Also, any general troubleshooting other thoughts would be appreciated.

  -Pat

  Edit: I went to the appointment of a DR and the come back about an hour and a half later, since this original post.  Now, during the installation screen complete, the progress bar has moved maybe another 10% is now about 85%.  It seems to load, but why so ssllooww?

  P.S. We have removed a number of your post for your secutiry. That is the information you probably don't want available to the public. -HP moderator of the Forum

  I got it to work.  Unfortunately, it is not useful for searching the Internet.  But i:

  Reduced system memory 2 gig.

  Renewed, cleaned and reinstall thermal paste for the cpu and the heatsink.

  removed the hard drive the system came with and just used well-known 200gig hard drive.

  Left the hard drive and cdrom SATA0 and SATA1, SATA2, and SATA3.

  And the big one, I loaded Win7 x 64 home premium.

  I'm typing on it now and updated as we speak.  However, I am always interested some of the answers to the questions.

  #1: what will happen if I used of non - ecc memory?  The system works not at all, or be slow?

  #2: and it is always possible to obtain HP restore disks?  (Edit 12/14)  I was not able to find a way to get drives install in addition to bring 2nd hand (ebay), but most of the original software is located on the support xw6600 site.

  I ordered 2 XEON Processors off ebay, another 8 GB of ram and the hp cpu heatsink and fan.  Time for fun!

  -Pat

• Could not load file or Assembly runtime being more recent than currently loaded run time

  I've recently upgraded to TestStand 2010 and Visual Studio 2010 TestStand 4.2.1 and Visual Studio 2008. I now get the following error in the analysis of the sequence for all calls to my .net dll.

  "Step"My_StepType"not loadable module. Could not load file or Assembly or one of its dependencies. This Assembly is built by a runtime newer than the runtime currently loaded and cannot be loaded. »

  I don't know how LONG it is. All of this worked previously. I tried to go back to the dll, but that makes no difference.

  Any ideas?

  Thank you.

  I found where this topic is discussed in detail a bit more.  It is in the TestStand reference manual that is installed with TS.  TS 2010 it's on page 5-12 and the section labeled using .NET Framework under section adapter .NET of Chapter 5 (Module adapters).

• (Dell) Windows 7 Home Prem OA: Please HELP! Windows is loading files.

  To the right,.
  Since my brother was playing around with my computer and play Minecraft, I got a screen that says: "Windows loading files. I tried almost everything, and I'm desperate. I watched a lot of things that still doesn't work. Repeativly F8 at startup, F10, F12 and nothing. The thing is, whenever I have turn the computer back on, there is no commissioning. The screen will appear just by these words: "Windows is loading files," and a white bar at the bottom. I see no symbol start like HP or DELL. I see no screen connection. I tried unplugging and reconnecting TAB, CTR, ALT, DELETE, put highlighted with arrows keys and down and clicking on ENTER. EVERYTHING. He has also been disconnected from the internet for several months and I can't use the disc slot.

  I have also all my photos, songs, videos, work, life and data on this computer. I NEED A WAY TO REPAIR THIS COMPUTER WITHOUT LOSING ALL MY STUFF! Please, please, please help!
  Thank you!

  Since your computer laptop is a Dell, I highly recommend going to Dell Community support.

  It's the HP product HP consumer support forum.

  http://en.community.Dell.com/support-forums/