FAT32 is corrupted.
Hello. I have a problem with my new Sansa Fuze 8 GB drive.
I plugged my Sansa Fuze and synced through usb MTP mode using WMP. After completing the Sansa, I had seen the "not quite «pas assez.»." space for music DB please delete 90 MB I had to do this, but I couldn't through WMP. I tried to format it (via windows Explorer, click right format). but I cancelled it when I did some research. I don't know what to do now.
I have a Sansa Fuze 8 GB player v2.
I use Windows Vista.
My Sansa was originally the MTP USB mode.
If you can, try formatting the device.
MSC, you can try "HP USB Disk Storage Format Too"
Tags: SanDisk Sansa
Similar Questions
-
Hi, pretty catastrophic issue here with my iPhoto and photo library.
Having had both my iPhoto and photo library stored on an external hard drive (since I'm on a 120 GB MacBook Air) to save space. Everything worked fine until recently.
Currently, all my pictures and videos bar as it is impossible to find the most recent import (s) - photo shows only the thumbnail of them.
The Master of the record, all these images and videos are of zero byte. The photo library also said 55GO (the total size of the photo library), but when trying to copy to a new position, only 9,77 GB is copied and also takes three to four times the rate of the normal copy. NB: 9,77 GB is the total of images and videos of the import (s) most recent are still correct.
The only mistake that I can't seem to remember is that I moved my iPhotos and photo of a FAT32 formatted partition on my hard drive external library. Imports I've done since located it on a drive to FAT32 format are the only ones not corrupt, all the previous pictures and videos are the affected.
Ive tried all repair and reconstruction of the library, but in vain...
When you view the images corrupt and videos in the library of Photos, they do not load. However video thumbnails always indicate the length of the videos, and when I right click on-> get info-> the file indicates this is the original size that is 66 MB. However, in the record master, right click-> get info on any corrupted photo or video - size indicates zero byte.
Since I have my library iPhotos and photos on an external hard drive, I have no backup Time Machine from them. I know it's a very stupid mistake to copy the library to FAT32, but I was not aware of the risks.
Any help, clarification of my question, etc. would be so so appreciated.
Thank you all.
Unfortunately, you have used a disk in the wrong format and will not work
If your library will not work and you have no backup (that's another really bad decision) then you have what you have - the bet you can make is to create a new library, Hold down the option key key by running Photos and create a new library) to a correct formatted drive (the pictures library must be on a volume formatted Mac OS extended (journaled) is directly related to a fast wired connection like USB, FireWire, or stroke, must always be available before photos being launched and cannot be used as a time Machine backup voume - and of course it needs to be backed up someway - Time Machine is a good way
Once yu have a library on a correct volume brake the low library to this volume, right-click and view the contents of packaging - copy the masters foder to the disk and their important pictures in the masters record for the new library
LN
-
My files on the hard drive are getting corrupted?
I use the model of MacBook Air 2013 Yosemite running. I have a Seagate BackPlus 1 TB drive to NTFS. And I use Tuxers NTFS on my Mac to read and write files from NTFS devices. Lately, I'm sloly from knowledge that my files on the hard drive are getting corrupted. When I try to open any folder I blocks until I have remove my hard drive. I lost some files like this. Now, they are completely inaccessilble. The big sone files show even ehen 0 bytes, they are around a GB or something. I start out freak because all my data is in this hard drive. 1 TB of data. Its my life is locked in it.
Is someone can you please tell me what is happening with my hard drive?
Thanks in advance...
Is someone can you please tell me what is happening with my hard drive?
Probably not. The problem you are experiencing is almost certainly that the drive itself has failed. It could have also been caused by third party software that you use to support a formatted NTFS volume. Isolate the cause to one or the other is probably not an effort worth it, because the files themselves are probably already damaged and unusable. In this case the only alternative to certain to succeed is to restore from a backup.
As you know the Mac FAT32 and ExFAT supports and can read, but not write - formatted NTFS volume. For this reason, if you ask the Windows compatibility, you must select ExFAT.
You could try using the third-party data recovery software, even if success is not guaranteed. I can offer no specific product recommendations.
-
IPod Classic 160GB - stays corrupt, tried everything I can find online. STIL reformatted to Fat32, says that it is corrupted. Windows 10. I was told if I can find the manual restore of Apple file, that can solve my problem, anyone know where I can get this file?
See corrupted iPod Classic. What are the stats from HARD drive?
TT2
-
Hyper V 2012 R2 corrupt firewallrule the name of the server for Remote Dekstop
Hello
I have currently installed Hyper v server r2 2012 proposes to test, but I have a problem with all the firewall rules Dekstop remote to connect to the server using remote dekstop I am force to disable all the rules of profile to connect. I'm downloading a few screenshots with my system info and problems that I currently have. Note: It is in the Working Group and am remoting to Win pro 8.1
Here is a list of things ot, I've done so far without result:
Reinstall the Hyper V Server
Reconstruction of firewall rule for the TCP-IN Remote Dekstop (the rule was added but once again with the corrupt name)
Rewrite of USB and reinstalling the server (the USB key is written for the UEFI system partition and formatted Fat32 GTP)
Reset the bios
There isn't any other firewall except those on the server that the network connection is directly from a router and it is not any firewall avable here.
PS because the screenshot shows am not able to activate remote dekstop rule for TCP-IN and UDP-IN because the names does not and I even used allow netfirewall rule the current name remote dekstop am still unable to connect to the only solution is to disable the firewall, but this isn't an option.
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
file missing or corrupt windows\system32\config\system
HELP - by on the title I did: -.
The full, first part, follow these steps:
- Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so. - When the "Welcome" screen appears, press R to start the Recovery Console.
- If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.
- When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.
- At the Recovery Console prompt, type the following lines, pressing ENTER after you type each line:MD tmp
copy c:\windows\system32\config\system c:\windows\tmp\system.bak
copy c:\windows\system32\config\software c:\windows\tmp\software.bak
Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
copy c:\windows\system32\config\security c:\windows\tmp\security.bak
copy c:\windows\system32\config\default c:\windows\tmp\default.bakdelete c:\windows\system32\config\system
delete c:\windows\system32\config\software
Delete c:\windows\system32\config\sam
delete c:\windows\system32\config\security
Delete c:\windows\system32\config\defaultCopy c:\windows\repair\system c:\windows\system32\config\system
copy c:\windows\repair\software c:\windows\system32\config\software
copy c:\windows\repair\sam c:\windows\system32\config\sam
Copy c:\windows\repair\security c:\windows\system32\config\security
Copy c:\windows\repair\default c:\windows\system32\config\default - Type exit to quit the Recovery Console. Your computer will restart.
Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.
If you have access to another computer, to save time, you can copy the text in step 5, and then create a text file called "Regcopy1.txt" (for example). To use this file, run the following command when you start in Recovery Console:
batch regcopy1.txtWith the command batch to the Recovery Console, you can process all the commands in a text file in the order. When you use thebatch command, you do not have to manually type as many commands.
Second part
To perform the procedure described in this section, you must be logged in as administrator or an administrative user (a user who has an account in the Administrators group). If you use Windows XP Home Edition, you can connect as an administrative user. If you sign in as an administrator, you must first start Windows XP Home Edition in safe mode. To start the computer in Windows XP Home Edition in safe mode, follow these steps.
Note Print these instructions before continuing. You cannot view these instructions after you restart the computer in Mode safe. If you use the NTFS file system, also print the instructions from article KB309531 of the Knowledge Base. Step 7 contains a reference to the article.
- Click Start , click shut down (or click turn off computer ), click restart , and then click OK (or click restart ).
- Press the F8 key.
On a computer that is configured to start to multiple operating systems, you can press F8 when you see the boot menu.
- Use the arrow keys to select the appropriate safe mode option and press ENTER.
- If you have a dual-boot or multiboot system, use the arrow keys to select the installation that you want to access, and then press ENTER.
In part two, you copy the registry of their location saved files by using the system restore. This folder is not available in the Recovery Console, and is usually not visible on the typical use. Before you begin this procedure, you must change several settings to make the folder visible:
- Start Windows Explorer.
- On the Tools menu, click folder options .
- Click the view tab.
- Under hidden files and folders , select Show hidden folders and files , and then click to clear theHide protected (recommended) operating system files check box.
- When appears in the dialog box confirming that you want to display these files, click Yes .
- Double-click the drive where you installed Windows XP to display the list of folders. If it is important to click on the correct drive.
- Open the System Volume Information folder. This folder is not available and is dimmed because it is defined as a file hidden doubling.
Note This folder contains one or more _restore {GUID} folders such as "_restore {87BD3667-3246-476B-923F-F86E30B3E7F8}.
Note You may receive the following error message:
C:\System Volume Information is not accessible. Access is denied.If you receive this message, see the following article in the Microsoft Knowledge Base for access to this folder and continue with the procedure:
309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder - Open a folder that was created not at the present time. You may need to clickDetails on the view menu to see when these folders were created. There may be one or more folders starting with "RPx under this folder. Here are the restore points.
- Open one of these folders to find a subfolder of the snapshot. The following path is an example of a folder path to the snapshot folder:C:\System Volume \RP1\Snapshot Information\_restore {D86480E3-73EF-47BC-A0EB-A81BE6EE3ED8}
- Starting from the Snapshot folder, copy the following files to the C:\Windows\Tmp folder:
- _REGISTRY_USER_. DEFAULT
- _REGISTRY_MACHINE_SECURITY
- _REGISTRY_MACHINE_SOFTWARE
- _REGISTRY_MACHINE_SYSTEM
- _REGISTRY_MACHINE_SAM
- Rename the files in the C:\Windows\Tmp folder as follows:
- Rename _REGISTRY_USER_. DEFAULT DEFAULT
- Rename _REGISTRY_MACHINE_SECURITY to SECURITY
- Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE
- Rename _REGISTRY_MACHINE_SYSTEM to SYSTEM
- Rename _REGISTRY_MACHINE_SAM to SAM
These files are the system restore registry files. Because you used the registry file that the Setup program created, this registry does not know that these restore points exist and are available. A new folder is created with a new GUID under System Volume Information and a restore point is created that includes a copy of the registry files that were copied during the first part. Therefore, it is important not to use the most recent folder, especially if the time stamp on the folder is the same at the moment.
The current configuration of the system is not aware of the previous restore points. You must have a previous copy of the registry to a previous restore point to make previous restore available again points.
The registry files that were copied to the Tmp folder in the C:\Windows folder are moved to ensure the files are available in the Recovery Console. You use these files to replace the registry files currently in the C:\Windows\System32\Config folder. By default, the Recovery Console has limited access to records and cannot copy the files in the File System Volume.
Note The procedure described in this section assume you are using your computer with the FAT32 file system. For more information on how to access the folder of information system with the NTFS file system Volume, click on the number below to view the article in the Microsoft Knowledge Base:
309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folderThird part
In part three, you delete the existing registry files, and then copy the system restore registry files to the C:\Windows\System32\Config folder:
- Start the Recovery Console.
- At the command prompt, type the following lines, pressing ENTER after you type each line:del c:\windows\system32\config\sam
del c:\windows\system32\config\security
del c:\windows\system32\config\software
del c:\windows\system32\config\default
del c:\windows\system32\config\system
copy c:\windows\tmp\software c:\windows\system32\config\software
copy c:\windows\tmp\system c:\windows\system32\config\system
copy c:\windows\tmp\sam c:\windows\system32\config\sam
Copy c:\windows\tmp\security c:\windows\system32\config\security
Copy c:\windows\tmp\default c:\windows\system32\config\default
Note Some of these command lines may be wrapped for readability.
- Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
- Type exit to quit the Recovery Console. Restart the computer.
- Click Start and then click all programs .
- Click on Accessories , then System Tools .
- Click System Restore , and then click restore to a previous RestorePoint .
-
Disk hard recovery of corrupt or missing...?
Hello
I gave my Acer Netbook to my son this weekend while he could reinstall everything again because I had some problems and he was running like a snail. However, he rang me yesterday and said that it is either without recovery or it was deleted or its corrupted.
That's what he says he did. It's above my head and I do not understand, but he said that might be the community. That's what he said below.
==================================================================================================
MS-DOS
DISKPART
List of Volume
Looking in DiskPart there should be at least 4 partitions and there is only 3 so the recovery partition is missing. How it happened I don't know because my knowledge of fathers of computers isn't that wonderful. To him remove a hidden partition that cannot be removed via DiskPart because it is a hidden partition is a complete mystery.
Volume 0 - C - NTFS - BOOT
Volume 1 - RECOVERY NTFS - HIDDEN (Missing)
Volume 2 - FAT32 - SYSTEM
Volume 3 - RECOVERY SYSTEM - SYSTEM
Is there a recovery media that I can buy and reinstalled the operating system. Other than what I could do is own execution in DiskPart and clear as the HARD drive and I have a license Windows 7 Ultimate 86 and 64-bit. I could create a bootable USB drive and perform a clean installation. But I would need to download all the drivers for the netbook.
* The Recovery partition is absent there is so no viable way to recover the Netbook back to settings factory because it no longer exists. Therefor, the only way of recovering or reinstalling the operating system is to me to either get in on recovery media or I reinstall a new installation of Windows 7 or Windows 8.1 which I fired disk so I can install it. But I need all the drivers beforehand, otherwise I would not be able to restore the Netbook to a State of normality.
==================================================================================================
Acer recovery media
If you are in the United States, you can buy it:
http://store.Acer.com/store/aceramer/en_US/eRecoveryIf you are outside the United States, you must call/email your regional Acer support service:
http://www.Acer.com/worldwide/support/or to download the drivers if you opt for a clean install:
-
system32\configuration\system or corrupted - boot problem
I have a laptop, Inspiron 1525, with XP Home Edition. I keept is message read, "" Windows didn't start because the folloing file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM "I tried the repair process, the F8 key, including" last good configuration, all to no known use. Help, please
Hello dutcchess
I just down loaded this how to from microsoftWhen you try to start or restart your Windows XP-based computer, you may receive one of the following error messages:Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEMWindows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SOFTWAREStop: c0000218 {Registry file failure} the registry cannot load the hive (file): \SystemRoot\System32\Config\SOFTWARE or its log or replacingSystem error: Lsass.exe
When you try to update a password the return status indicates that the value provided as the current password is not correct.Guided Help to recover a corrupted registry that prevents Windows XP startup
Guided Help is available to help recover a corrupted registry that prevents Windows XP startup. Guided Help can automatically perform the steps for you.Actions running this guided help can be undone after Guided Help is complete. To undo the actions running this Guided Help to restore corrupted registry files, start the Recovery Console, and then manually copy the Windows\Tmp\*.bak files in the Windows\System32\Config folder. Be sure to rename the files to remove the .bak extension.
For more information about guided help, click on the number below to view the article in the Microsoft Knowledge Base:
915092 (http://support.microsoft.com/kb/915092/) Description of guided help for Microsoft Knowledge Base articlesRequirements to install and to use this guided help
- You must be logged to Windows using an administrator account to install and to use this guided help.
- You must run Windows XP Home Edition, Windows XP Professional, Windows XP Media Center Edition or Windows XP Edition Tablet PC to install and to use this guided help.
You must first download Guided Help. To start, click on the following link:
(http://support.microsoft.com/kb/307545/)
Manual steps to recover a corrupted registry that prevents the start of the procedure that this article describes to Windows XP using System Restore and Recovery Console. This article lists also all required specific steps to ensure that the process is fully completed. When you have completed this procedure, the system returns to a state very close to the State until the problem occurred. If you have ever run NTBackup and completed a system state backup, you don't have to follow the procedures in parts two and three. You can go to part IV. First part in the first part, you start the Recovery Console, create a temporary folder, back up the existing registry files to a new location, delete the registry from their existing location files and then copy the registry files in the repair folder to the System32\Config folder. When you have completed this procedure, a registry is created that you can use to start Windows XP. This registry was created and saved during the initial setup of Windows XP. Therefore, any changes and settings that took place after Setup has finished are lost.
The full, first part, follow these steps:
- Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so. - When the "Welcome" screen appears, press R to start the Recovery Console.
- If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.
- When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.
- At the Recovery Console prompt, type the following lines, pressing ENTER after you type each line:MD tmp
copy c:\windows\system32\config\system c:\windows\tmp\system.bak
copy c:\windows\system32\config\software c:\windows\tmp\software.bak
Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
copy c:\windows\system32\config\security c:\windows\tmp\security.bak
copy c:\windows\system32\config\default c:\windows\tmp\default.bakdelete c:\windows\system32\config\system
delete c:\windows\system32\config\software
Delete c:\windows\system32\config\sam
delete c:\windows\system32\config\security
Delete c:\windows\system32\config\defaultCopy c:\windows\repair\system c:\windows\system32\config\system
copy c:\windows\repair\software c:\windows\system32\config\software
copy c:\windows\repair\sam c:\windows\system32\config\sam
Copy c:\windows\repair\security c:\windows\system32\config\security
Copy c:\windows\repair\default c:\windows\system32\config\default - Type exit to quit the Recovery Console. Your computer will restart.
- Click Start, click shut down (or click turn off computer), click restart, and then click OK (or click restart).
- Press the F8 key.
On a computer that is configured to start to multiple operating systems, you can press F8 when you see the boot menu.
- Use the arrow keys to select the appropriate safe mode option and press ENTER.
- If you have a dual-boot or multiboot system, use the arrow keys to select the installation that you want to access, and then press ENTER.
- Start Windows Explorer.
- On the Tools menu, click folder options.
- Click the view tab.
- Under hidden files and folders, select Show hidden folders and files, and then click to clear the Hide protected (recommended) operating system files check box.
- When appears in the dialog box confirming that you want to display these files, click Yes .
- Double-click the drive where you installed Windows XP to display the list of folders. If it is important to click on the correct drive.
- Open the System Volume Information folder. This folder is not available and is dimmed because it is defined as a file hidden doubling.
Note This folder contains one or more _restore {GUID} folders such as "_restore {87BD3667-3246-476B-923F-F86E30B3E7F8}.
Note You may receive the following error message:
C:\System Volume Information is not accessible. Access is denied.If you receive this message, see the following article in the Microsoft Knowledge Base for access to this folder and continue with the procedure:
309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder - Open a folder that was created not at the present time. You may need to click Details on the view menu to see when these folders were created. There may be one or more folders starting with "RP x under this folder." Here are the restore points.
- Open one of these folders to find a subfolder of the snapshot. The following path is an example of a folder path to the snapshot folder:C:\System Volume \RP1\Snapshot Information\_restore {D86480E3-73EF-47BC-A0EB-A81BE6EE3ED8}
- Starting from the Snapshot folder, copy the following files to the C:\Windows\Tmp folder:
- _REGISTRY_USER_. DEFAULT
- _REGISTRY_MACHINE_SECURITY
- _REGISTRY_MACHINE_SOFTWARE
- _REGISTRY_MACHINE_SYSTEM
- _REGISTRY_MACHINE_SAM
- Rename the files in the C:\Windows\Tmp folder as follows:
- Rename _REGISTRY_USER_. DEFAULT DEFAULT
- Rename _REGISTRY_MACHINE_SECURITY to SECURITY
- Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE
- Rename _REGISTRY_MACHINE_SYSTEM to SYSTEM
- Rename _REGISTRY_MACHINE_SAM to SAM
- Start the Recovery Console.
- At the command prompt, type the following lines, pressing ENTER after you type each line:del c:\windows\system32\config\sam
del c:\windows\system32\config\security
del c:\windows\system32\config\software
del c:\windows\system32\config\default
del c:\windows\system32\config\system
copy c:\windows\tmp\software c:\windows\system32\config\software
copy c:\windows\tmp\system c:\windows\system32\config\system
- Type exit to quit the Recovery Console. Restart the computer.
- Click Startand then click all programs.
- Click on Accessories, then System Tools.
- Click System Restore, and then click restore to a previous RestorePoint.
- Microsoft Windows XP Home Edition
- Microsoft Windows XP Professional
- Microsoft Windows XP Tablet PC Edition
- Microsoft Windows XP Media Center Edition
-
Deleting the files corrupted in the recycled folder
I am running Windows XP and I have tried to run the defrag program. The program will not work until the end because of corrupted files (4) in the recycled folder. I can view the list of files by going to the command prompt, but no action that I have tried there will allow me to delete these files. How can I delete these files in the recycled folder?
You have left out some important information and may not have read material thread the Tom very carefully.
Represents the drive on which this basket located in NTFS or FAT32 format?
On NTFS, XP drives, the name of the file from the Recycle Bin is DRIVE: \Recycler
On the FAT, XP drives, the name of the file from the Recycle Bin is DRIVE: \Recycled
(The name change again in Vista and Win 7, but you said you have XP)
If the drive is NTFS, it was converted to FAT32 or formatted directly?
If you used the CONVERT command to convert a drive to the FAT format on a disk formatted in NTFS, you will always have the directory drive: \Recycled old, but he is no longer the basket. If this is the case, you can delete the whole directory (if ensure that a directory C:\Recycler exist, just in case) using rmdir /s in a command prompt window.
You can read all documents under the "basket" at http://www.kellys-korner-xp.com/xp_abc.htm
There are several methods to remove otherwise undeleteable files. In ascending order of the drawbacks:
Method 1
Open a command prompt window (start > run > cmd > OK)
Type the following commands in the command prompt window and press ENTER after each lineCD C:\Recycled
ATTRIB s h - r *. *
Del *. *If the last command was NOT successful, then
Method 2
1 always open method command prompt window, start the Task Manager
Find explorer.exe in the processes list, right-click and select end process
Return to the command prompt window and see if del *. * will now delete the files
If the files are deleted, return to the Task Manager, click on file > new task (run...), type explorer.exe, and then click OK.If the files still do not remove, then
Method 3
Redemarrer restart in Safe Mode, and then follow the steps in method 1If the files still do not remove, then
Method 4
Download the iso file to a live Linux such as Knoppixdistribution.
Burn a CD using a tool like the free ImgBurn
Boot from the CD (you may need to change the boot order in your BIOS)
Remove files from Linux -
Not enough space for DB - formatted - now FAT is corrupted
I received an error message after the music to transfer to my Sansa Fuze. The message indicate that there was not enough space for DB and supposed to free 90 MB. I have read the instructions on the website and formatted the drive. Now, I get an error message saying that FAT is corrupted and say to connect it to the PC to get FAT. I reconnected it to the computer without modification. Then, I downloaded the firmware zip file and uploaded the file on the disk. Still no change. Please notify.
You can try the player formatting MSC mode. To connect the player in MSC mode, with the player to the wide, slide the switch down to the locked position (you will see an orange color it), and then press and hold the< or="" back="" button="" while="" you="" connect="" the="" fuze="" to="" the="" pc. ="" you="" may="" have="" to="" continue="" holding="" the="">< button="" down="" for="" a="" while="" until="" you="" get="" a="">
If the computer recognizes the player in form through the computer. If your drive is a one, fornat 2 GB as FAT. For a 4 GB or 8 GB, formatted in FAT32.
If it formats correctly and the drive does not operate normally, reformat through the player settings to optimize the memory.
Another thing, sometimes the 'diskspace for DB' message appears due to a bad music file (s). You can check the files that you have transferred before the trouble began.
-
2GB of detonators like not recognized (and "FAT is corrupted" etc.)
Right... Well. I recently accidentally can I have badly formatted my Fuze GB 2 as FAT instead of FAT32 (or whatever it's supposed to be).
The message on the screen (whenever I turn on the rocket or connect) is
"FAT is corrupted. Please connect the device to PC and recover FAT. »
Well, I don't know how I'm supposed to do. It is not recognized by Windows (she appears as "Unrecognized USB Device" and won't let me access it or format or something, does not even get a drive letter assigned and there is no option in the Manager). In Ubuntu, it is recognized as a mass storage device and I see it always all the files that were on it before it stopped working, but I can not format or do something with it (even if I could copy the files).
Anyone have any ideas on how to solve this problem? =(
(I don't mind losing what is there, I have it on my HARD drive in any case)
Thank you<>
EDIT: Also, I was in PARIS when I tried to format it first time round (before it is broken), but I can't in the drive for change to MSC because the formatting is inconsistent and it is unable to load the user interface...
Right, well, I used it too muchl to format as FAT and I can access now.
Everything seems to work fine, so I'm happy.
Completely forgot that all of the built-in Windows utilities suck.
-
FAT corrupted USB not recognized
I have problems with my rocket GB 8. This morning, while trying to fix my flash drive I accidently deleted the partition off my rocket. Of course, now I'm reeciving 'Fat corrupted' error on my fuse and USB will not recognize. I've searched high and low. I tried to power it in 20 seconds, put the "rocket" on hold, then press on the< rewind="" button="" (and="" center="" buton)="" while="" connecting="" the="" usb="" and="" i="" still="" receive="" the="" usb="" not="" recognized="" in="" windows="" (xp,="" vista="" &="" 7).="" i="" even="" tried="" using="" my="" wife's="" laptop="" with="" vista="" with="" the="" same="" usb="">
Please tell me I didn't have the toast when I messed up the partition! Help!
Finally, after the persistence, I got the computer to recognize the "rocket". Managed to format to FAT32 via Windows without any problem, then via the "rocket". All is well now.
-
I only part I to recover from a corrupt registry! Help
A couple of weeks, I had a Windows XP didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. I did a restore using the following
First part
In the first part, you start the Recovery Console, create a temporary folder, back up the existing registry files to a new location, delete the registry from their existing location files and then copy the registry files in the repair folder to the System32\Config folder. When you have completed this procedure, a registry is created that you can use to start Windows XP. This registry was created and saved during the initial setup of Windows XP. Therefore, any changes and settings that took place after Setup has finished are lost.The full, first part, follow these steps:
- Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so. - When the "Welcome" screen appears, press R to start the Recovery Console.
- If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.
- When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.
- At the Recovery Console prompt, type the following lines, pressing ENTER after you type each line:MD tmp
copy c:\windows\system32\config\system c:\windows\tmp\system.bak
copy c:\windows\system32\config\software c:\windows\tmp\software.bak
Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
copy c:\windows\system32\config\security c:\windows\tmp\security.bak
copy c:\windows\system32\config\default c:\windows\tmp\default.bakdelete c:\windows\system32\config\system
delete c:\windows\system32\config\software
Delete c:\windows\system32\config\sam
delete c:\windows\system32\config\security
Delete c:\windows\system32\config\defaultCopy c:\windows\repair\system c:\windows\system32\config\system
copy c:\windows\repair\software c:\windows\system32\config\software
copy c:\windows\repair\sam c:\windows\system32\config\sam
Copy c:\windows\repair\security c:\windows\system32\config\security
Copy c:\windows\repair\default c:\windows\system32\config\default - Type exit to quit the Recovery Console. Your computer will restart.
Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.
If you have access to another computer, to save time, you can copy the text in step 5, and then create a text file called "Regcopy1.txt" (for example). To use this file, run the following command when you start in Recovery Console:
batch regcopy1.txtWith the command batch to the Recovery Console, you can process all the commands in a text file in the order. When you use the batch command, you do not have to manually type as many commands. Second part to perform the procedure described in this section, you must be logged on as an administrator or an administrative user (a user who has an account in the Administrators group). If you use Windows XP Home Edition, you can connect as an administrative user. If you sign in as an administrator, you must first start Windows XP Home Edition in safe mode. To start the computer in Windows XP Home Edition in safe mode, follow these steps.
Note Print these instructions before continuing. You cannot view these instructions after you restart the computer in Mode safe. If you use the NTFS file system, also print the instructions from article KB309531 of the Knowledge Base. Step 7 contains a reference to the article.
- Click Start, click shut down (or click turn off computer), click restart, and then click OK (or click restart).
- Press the F8 key.
On a computer that is configured to start to multiple operating systems, you can press F8 when you see the boot menu.
- Use the arrow keys to select the appropriate safe mode option and press ENTER.
- If you have a dual-boot or multiboot system, use the arrow keys to select the installation that you want to access, and then press ENTER.
In part two, you copy the registry of their location saved files by using the system restore. This folder is not available in the Recovery Console, and is usually not visible on the typical use. Before you begin this procedure, you must change several settings to make the folder visible:
- Start Windows Explorer.
- On the Tools menu, click folder options.
- Click the view tab.
- Under hidden files and folders, select Show hidden folders and files, and then click to clear the Hide protected (recommended) operating system files check box.
- When appears in the dialog box confirming that you want to display these files, click Yes .
- Double-click the drive where you installed Windows XP to display the list of folders. If it is important to click on the correct drive.
- Open the System Volume Information folder. This folder is not available and is dimmed because it is defined as a file hidden doubling.
Note This folder contains one or more _restore {GUID} folders such as "_restore {87BD3667-3246-476B-923F-F86E30B3E7F8}.
Note You may receive the following error message:
C:\System Volume Information is not accessible. Access is denied.If you receive this message, see the following article in the Microsoft Knowledge Base for access to this folder and continue with the procedure:
309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder - Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
- Open a folder that was created not at the present time. You may need to click Details on the view menu to see when these folders were created. There may be one or more folders starting with "RPx under this folder. Here are the restore points.
- Open one of these folders to find a subfolder of the snapshot. The following path is an example of a folder path to the snapshot folder:C:\System Volume \RP1\Snapshot Information\_restore {D86480E3-73EF-47BC-A0EB-A81BE6EE3ED8}
- Starting from the Snapshot folder, copy the following files to the C:\Windows\Tmp folder:
- _REGISTRY_USER_. DEFAULT
- _REGISTRY_MACHINE_SECURITY
- _REGISTRY_MACHINE_SOFTWARE
- _REGISTRY_MACHINE_SYSTEM
- _REGISTRY_MACHINE_SAM
- Rename the files in the C:\Windows\Tmp folder as follows:
- Rename _REGISTRY_USER_. DEFAULT DEFAULT
- Rename _REGISTRY_MACHINE_SECURITY to SECURITY
- Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE
- Rename _REGISTRY_MACHINE_SYSTEM to SYSTEM
- Rename _REGISTRY_MACHINE_SAM to SAM
- Start the Recovery Console.
- At the command prompt, type the following lines, pressing ENTER after you type each line:del c:\windows\system32\config\sam
del c:\windows\system32\config\security
del c:\windows\system32\config\software
del c:\windows\system32\config\default
del c:\windows\system32\config\system
copy c:\windows\tmp\software c:\windows\system32\config\software
copy c:\windows\tmp\system c:\windows\system32\config\system
copy c:\windows\tmp\sam c:\windows\system32\config\sam
Copy c:\windows\tmp\security c:\windows\system32\config\security
Copy c:\windows\tmp\default c:\windows\system32\config\default
Note Some of these command lines may be wrapped for readability.
- Type exit to quit the Recovery Console. Restart the computer.
- Click Startand then click all programs.
- Click on Accessories, then System Tools.
- Click System Restore, and then click restore to a previous RestorePoint.
-
App data folder corrupted when you attempt to install the .exe file
Hello
I'm using Vista OS, I get an error message like App data is unreadable, when I try to install any .exe file and ask me to run chkdsk.exe. I run, I don't enter comments screen black (I'm not aware of any comment). But no use, I still face the same question. while trying to install any .exe file. Please help me out of it.
Thank you for your support in advance.
Kind regards
Manosarath
Hello
1 did you change on your computer?
2. What is the exact error message you received?
Method 1:
I suggest you perform the clean boot and check.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2:
I also suggest you to follow the link and check.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3:
Check your hard drive for errors
http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
WARNING: Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.
-
Hello
I have a pavillion dv5 1058eo equipped of a corrupted Bios. Screen i black and codes led 2 flashes. This means that I have to replace the Bios. I tried with a USB pen with the latest bios drivers. I turned off the computer, the distasteful battery and power cord. Then hold the button down for a minute.
Made a key USB FAT32 og copy the bios files. (Renamed the files 30F2.bin and 30F2.rom 30F2F38.fd).
Then insert the USB and power cord. I hold the key windows and B at the same time, when I turn on the computer. The computer turns on and the USB lights up for a few seconds. Then nothing happends.
Codes led still flashes 2 - times.
I tried this severel times, but the first time the USB got without blinking.
Is there anyone who has an idea whats wrong?
(I have cheked cross that the version of the bios files are correct).
:-)
It would be better for you to do with a \Bing on Google search to find a company BIOS online.
Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.
If you have access to another computer, to save time, you can copy the text in step 2, and then create a text file named "Regcopy2.txt" (for example). To use this file, run the following command when you start in Recovery Console:
Fourth part
and now when I go to the fourth part and try to connect, it says I need to activate windows to open a session. If I click on Yes, the computer crashes just in my background image, if I click on no, this Chuck me back to the log in page... What is wrong with this blooming thing
Please HELP - it took three days of messing around and actually the Ive got nowhere!
Do, or do not. There is no test.
I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with case windows_folder If it is a different place.
If you have access to another computer, to save time, you can copy the text in step 5, and then create a text file called "Regcopy1.txt" (for example). To use this file, run the following command when you start in Recovery Console:
With the command batch to the Recovery Console, you can process all the commands in a text file in the order. When you use the batch command, you do not have to manually type as many commands. Second part to perform the procedure described in this section, you must be logged on as an administrator or an administrative user (a user who has an account in the Administrators group). If you use Windows XP Home Edition, you can connect as an administrative user. If you sign in as an administrator, you must first start Windows XP Home Edition in safe mode. To start the computer in Windows XP Home Edition in safe mode, follow these steps.
Note Print these instructions before continuing. You cannot view these instructions after you restart the computer in Mode safe. If you use the NTFS file system, also print the instructions from article KB309531 of the Knowledge Base. Step 7 contains a reference to the article.
In part two, you copy the registry of their location saved files by using the system restore. This folder is not available in the Recovery Console, and is usually not visible on the typical use. Before you begin this procedure, you must change several settings to make the folder visible:
These files are the system restore registry files. Because you used the registry file that the Setup program created, this registry does not know that these restore points exist and are available. A new folder is created with a new GUID under System Volume Information and a restore point is created that includes a copy of the registry files that were copied during the first part. Therefore, it is important not to use the most recent folder, especially if the time stamp on the folder is the same at the moment.
The current configuration of the system is not aware of the previous restore points. You must have a previous copy of the registry to a previous restore point to make previous restore available again points.
The registry files that were copied to the Tmp folder in the C:\Windows folder are moved to ensure the files are available in the Recovery Console. You use these files to replace the registry files currently in the C:\Windows\System32\Config folder. By default, the Recovery Console has limited access to records and cannot copy the files in the File System Volume.
Note The procedure described in this section assume you are using your computer with the FAT32 file system. For more information on how to access the folder of information system with the NTFS file system Volume, click on the number below to view the article in the Microsoft Knowledge Base:
Part three in the third part, you delete the existing registry files, and then copy the system restore registry files to the C:\Windows\System32\Config folder:
copy c:\windows\tmp\sam c:\windows\system32\config\sam
Copy c:\windows\tmp\security c:\windows\system32\config\security
Copy c:\windows\tmp\default c:\windows\system32\config\default
Note Some of these command lines may be wrapped for readability.
Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with case windows_folder If it is a different place.
If you have access to another computer, to save time, you can copy the text in step 2, and then create a text file named "Regcopy2.txt" (for example). To use this file, run the following command when you start in Recovery Console:
Fourth part
Back to topREFERENCES
For more information about system restore, click on the numbers below to view the articles in the Microsoft Knowledge Base:
For more information about the three likely causes of registry corruption and how to isolate, click on the number below to view the article in the Microsoft Knowledge Base:
If this post can help solve your problem, please click the mark as answer check on this page THANKS AND GOOD LUCK
These files are the system restore registry files. Because you used the registry file that the Setup program created, this registry does not know that these restore points exist and are available. A new folder is created with a new GUID under System Volume Information and a restore point is created that includes a copy of the registry files that were copied during the first part. Therefore, it is important not to use the most recent folder, especially if the time stamp on the folder is the same at the moment.
The current configuration of the system is not aware of the previous restore points. You must have a previous copy of the registry to a previous restore point to make previous restore available again points.
The registry files that were copied to the Tmp folder in the C:\Windows folder are moved to ensure the files are available in the Recovery Console. You use these files to replace the registry files currently in the C:\Windows\System32\Config folder. By default, the Recovery Console has limited access to records and cannot copy the files in the File System Volume.
Note The procedure described in this section assume you are using your computer with the FAT32 file system. For more information on how to access the folder of information system with the NTFS file system Volume, click on the number below to view the article in the Microsoft Knowledge Base:
Part three in the third part, you delete the existing registry files, and then copy the system restore registry files to the C:\Windows\System32\Config folder:
Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.
If you have access to another computer, to save time, you can copy the text in step 2, and then create a text file named "Regcopy2.txt" (for example). To use this file, run the following command when you start in Recovery Console:
Fourth part
But after the game, I, my system was up and so I didn't do parts 2 3 & 4. The other day I got the same error message when I started so I thought that no problem I'll try that again. Except when I get to the part in part I say type md tmp go, I get the message that this file already exists. Can some help me with this you problem, I have tons of photos and music that I need to register! I had windows xp professional with all service packs.
rgmcmanus,
If the tmp folder already exists then you can either remove and then recreate with the command "rd tmp" or you can just create a different name like tmp1. If you keep the registry errors you may need to back up all your data and then do a clean install. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
I can't sign on my Skype. I downloaded it to work and it works perfectly fine. My computer has a windows XP and a window vista home (the one with the problem). I already uninstalled it and followed all the instructions on the Skype website. It did no
-
corrupted file? Run the chkdsk utility?
I am trying to open some of my files and it always tells me that the file is damaged and unreadable. Please run the Chkdsk utility... I searched my computer for "chkdsk utility" and can't find that. Help, please!
-
Premier Pro 2015.3 installation failure
I'm trying to download first Pro. It never gets above 2% and missed red Installation warning appears. I have a Windows 7 pro 64-bit. For some reason still installed fine. I have not tried all the others.When I click on learn more he just said: 'faile
-
I'm trying to upload a PDF file and it is a failure and I have the new version of adobe, it tells me I'm missing plugin, why is - this I do not understand.