Text of the multiState Fuzzy DPS object?

Similar Questions

• definition of text within the specific Web div object

  Hello!  I am trying to find a way to take the text of a text caption and assign it to a specific div inside a Web object.

  I tested it with a site regular html with embedded iframe and it works fine, but with Captivate, I can't get the text to a web object.

  The WebObject is named CC_box and inside, there is a div tag with an id of 'text' - this is where the text should go.  The text caption containing the text is named CC_source_1 for the first slide, then CC_source_2 for the next, etc.

  Here is my code:

  var slideNumber = window.cpAPIInterface.getCurrentSlideIndex ();                                Gets the number of the current slide

  var ccText = document.getElementById("CC_source_"_+_slideNumber).textContent;     Retrieves the text of a legend of text on a page in progress - works fine

  $("#CC_box).contents ().find("#text").html (ccText);                                                          This line of code works perfectly in HTML, but not in Captivate

  What is a good way to access this div within the web object of Captivate?

  Thank you!

  Thank you, I'll try that!

  in the meantime I kept trying different things here and found that if I go 'deeper' and call iframe directly as opposed to a container div, everything works, so in this case the following worked:

  $("#myFrame_CC_boxc").contents ().find("#text").html (ccText);

  Interestingly, Captivate attached a 'c' at the end of the name of the div, so even if I named the CC_box of Web object, we call it actually CC_boxc if you look in the DOM Explorer

• take the text to the center of the object

  Hello everyone.

  I have a task to create the text in the center of any object.

  For example I have simple object

  

  After using my script, we can see effect like that

  

  I use new areaText for her creation.

  BUT I can't use areaText if we have a hole inside the object.

  

  because illustrator think its two different object and the text to take into the hole (2 times: for the buoy red and white circle),

  So I need to keep red donut text...

  

  How can I do?

  Hi chudomozg,

  your 'donut' is a compound path (with 2 pathItems).

  Maybe it's a bit more useful for you:

  // CompoundPath_WidthOfElements.jsx
  // required: open document with one selected compound path e.g. a "donut"
  
  var aDoc = app.activeDocument;
  
  var sel = aDoc.selection;
  if (sel[0].typename == 'CompoundPathItem') {
      alert(sel[0].pathItems.length);
      alert(sel[0].pathItems[0].visibleBounds[2] - sel[0].pathItems[0].visibleBounds[0]); // width in Points
      alert(sel[0].pathItems[1].visibleBounds[2] - sel[0].pathItems[1].visibleBounds[0]);
      }
  

  Have fun

• Is it possible to text on the next page?

  I do a form of sheets of A4 format with repeating field and shape of text to the next page flow/objects. is this possible?  pls help.

  Hi Tangnamofool2,

  It is possible with the following things supported:

  (1) make sure that the subform/Page parent in which you have repeating field has the content value sank

  (2) make sure that the option "allow Page break in content" is checked

  If you have any question, you can send the form to me @ [email protected]

  Thank you

  Kumar

• the text or the image sometimes 'break up' in a State of fuzzy, illegible

  original title: fuzzy text or image

  Since I installed Windows 7, the text or the image sometimes 'break' in a blurry, unreadable state.  It happens in Word and other programs. It seems to be no reason for when it will occur, but lately it often happens when I play Solitaire. Sometimes the screen alternately clear, blur, lighten, etc..

  Hi threadsmith

   

  Method 1:

  You can use the hardware and troubleshooting of devices and also the display resolution of quality issues. Check if this can help to solve problems -

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

  
  See below the link assistance and control-

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-display-quality

   

  Method 2:

  Step 1 :
  To resolve the problem, you can check if uninstalling and reinstalling then the display driver allows.
  Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  After the computer restarts, the drivers will be installed automatically.
  
  Step 2:

  If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site to help you.

  You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• How do I do to convert the text of the String object to the Clipboard.

  Hi all, I am a beginner and I have a problem with the method of the Clipboard. I want to put a text string to the Clipboard, but the Clipboard.put method requires an object. What can I do to convert my text from the string object?

  My code below:

  String message = OriginalMessage.getBodyText();
  
                  String[] selections = {"Copy","Cancel"};                            Dialog addDialog = new Dialog("Copy to Clipboard", selections, null, 0, null);                           LabelField field = new LabelField(message);                addDialog.add(field);    
  
              if(addDialog.doModal() == 0) // User selected "Copy".            {
  
                  Clipboard cb = new Clipboard.put(message);
  
              }
  

  Please help me.

  A string is an object in Java.  You can simply call Clipboard.getClipBoard () .put (message);

• Problem creating Cup by text on the object

  So I group of shapes that are each a different color a rectangle (took a rectangle and used the tool for scissors divide to recolor). Each color is its own form, but I put them all in a group if that makes since. Then I put the text above the form to make the cut through and it turned out all rectangle white? It broken, but got rid of the gradient? Whats happening?

  Action taken:

  Click with the right button on text

  Vectorize

  Select the object and the text

  Click on exclude to scout

  Thanks, Tommy

  You want an Opacitiy mask.

  Make the text in black on top the glomeruli color objects.

  Select both and choos make mask in the transparency Panel.

  Uncheck the Clip and invert the mask.

• How can I make the text in all the boxes down following objects when the text box is changed from 1 to 2 lines?

  Hi people Muse.

  I'm faced with a problem of text box:

  At the bottom of my page, I have the title "ACTING ERMUTIGEN ZUM". Without any manual adjustment, I was happy to see that the text box pushes down the following objects as soon as the title Exchange of 1 to 2 lines. Point out clearly: I didn t add any point to stop or change any additional settings to achieve this, it just happened automatically and that's exactly what I want to happen.

  To my confusion, I can´t find a way to apply this behavior for the second title 'COURAGE OBSERVES UND LOSEN. It s on the same page. When I drag the breakpoint controller in the design-time view from the left to the breakpoint 900 pxor do it in the browser after export of the site, the title changes from 1 to 2 lines, as assumed, , but then the next Don t objects react and stay in the same place they stay when the title takes only 1 line.

  You will find the site on businesscatalyst:

  WILLKOMMEN

  I´d appreciates your support very well. I m sure it s not a big problem, but after an hour of re - try and control and do not receive a millimeter in advance, I thought, he could be one of these 'Don t worry - here comes the solution'- Muse hero there, read this. What you...? ;-)

  Thank you in advance.

  Moritz

  –––

  1st Title: everything works fine...

  

  

  –––

  2nd title: the 1200 px BP do everything ready...

  

  .. .but as I drag the marker of BP to the left just as I did with the title 1, the 2nd title doesn´t lower content:

  

  If you set the text block "ZUM ACTING... "sensitive width via the resizing control, rather than"Stretch to the width of the browser", which will provide the behavior you're looking for.

  We will study the design compared to the difference of the browser view. It seems that how items are grouped in resizing behavior is different in the case of elements with parameters width Resize mixed, in the mode of creation of the Muse and the browser.

• Center text to the left of the object

  How to align the center of the text to the left of the object? Make the object the object 'key '? I want the object remain in place.

  Use smart guides.

  

• How to wrap text around the anchored object (image)

  I quickly started to get account that I am not the mental giant I had previously thought!

  Having recently made the switch to InDesign, I fight to pick up some of the different methodologies, and more still, the different jargon.

  I read the section guide from Adobe on this request, and I feel none the wiser is. I'm sorry to you guys with what is probably a very trivial question for users over three years, but let's go even of evil.

  I am trying to anchor the image object in a block of text, with the image of the text wrapping. While it seems to be in my ability to insert the object and to wrap the text, I have real problems to anchor this object in the right place.

  What I'm trying to look like this: -.

  

  Can anyone please help me, a simple "idjit" way how to do this?

  Any help is greatly appreciated.

  See you soon... Scotty

  If the image is placed on the page:

  

  Drag the symbol at the top right in a paragraph before that the first line is ignored when the text is wrapped.

  I suggest to save all the settings (wrapping text, the position of an object of anchroed, etc.) in the Styles of an object as it makes it easier to do global settings later.

• When I Change the size of a Widget/Menu of the text box, the other objects move according to it. How can I stop?

  Example: There is an area of text and objects below it. I add more text and the text box size becomes larger.

  Then the objects below move downwards.

  How can I stop from happening?

  Hi LP700CR7,

  This is a default behavior, I'm afraid, it is not possible to stop this behavior at this point in the Muse.

• Can I change the State of an object by highlighting on the text?

  This issue probably makes no sense, but I didn't know how this word with just a few words.

  I'm working on a site where I have a "button" that includes text in. When someone passes over the button, it changes color (it's basically showing the user that the site meets). When I put the text in the button, it causes the button changes color when I go over it.

  I know that it is because the text is covering the area that is supposed to respond to the mouse of the user.

  So, I wonder if there is a way to either make the text and the 'button' all that against, or whether it is possible to make the text 'invisible' to the mouse. What I mean by 'invisible', it is that the computer recognizes the text that will be the key that is sensitive to the user's mouse.

  I am able to do using photoshop, but I was just wondering if it is possible to do in only muse.

  Hello

  You can define States for the background as the rectangle layer, then insert the text block that will change the State to move mouse, but if the text block covers the background, then he used active state.

  The object you are trying to achieve as invisible to the mouse text is not possible with the native menu features, but yes as you said you can use an image for this, write the text and use the image.

  The status button has same functionality with rectangle in the background and text in this.

  Thank you

  Sanjit

• Change the text and the images do not recognize a particular photo such that an object cannot therefore replace image

  All other photos are recognized as images. It has no higlighting and you get just 'Select All' when you right click, so it is obviously considered as text. The photo is not different from those who can be replaced. The photo is recognized as an object by the object Inspector that gives all the details.

  Thanks Bill & Michael. Yes, I would say that it is somehow connected to surround the text. I found a solution via the edit object tool. There were about half a dozen of these photos of problem in my book that had more than 100 photos. Although the text tools change & objects does not work, the tool change object Print production. Instead of an option to replace the Image, you get an option to change the Image, where you can change the resolution (which is what I wanted to do) via the Photo shop. So, even if we do not know the reason for which these photos with their text mГЄlГ surrounding, we now have a convenient way to solve the problem. Thanks again to you all.

• Text on the multi-state object disappears in Adobe Content Viewer

  I use InDesign CS5 to build folios for a tablet device. I created a slide show using a multi-state object. Also, I placed the text on top of the top image to indicate that it is a slide show. When I go to the Overlay creator to see a preview of the page in the Adobe, the text on the slide show content viewer disappears. Why is this happening?

  Guessing from your description, the text should be part of the first State of the ASM, and it isn't. You can add it to the first State via the MSO Panel.

• When using the 'tools', 'Interactive objects', 'Add a button', how to make the text for the button name is displayed? I have tried everything and only the background, or lacxk, appears.

  I created a pdf document using Adobe Acrobat XI base and want to put a link on each page, return to the table of contents. However, the tool "Add a link" I cannot place this link on each page at a time. Accordingly, I used the tool 'Add a button' interactive Actions that allows me to do what I want. However, when I enter the name of the button, add background color (or not) and register, the name of the text for the button does not show, only the background appears (or nothing if I select no background). The button works, it just is not labeled. Any help will be appreciated.

  This is the area of the label, under Properties - Options.

  The game, 23:02, charlesc90551452, [email protected] , 14 may 2015