Text selection pointer is not visible in Windows Vista

Similar Questions

• 10 blackBerry phone not visible in Windows Explorer - post 10.3 upgrade

  I installed 10.3 on my Q10 without problem, given the mix icon and decided to install (after using the work of passports), so a number of things...

  1 mix downloaded now--but it wants to install on a f - that would be the Q10.

  2. when connected via USB (or wifi) Q10 is not visible in Windows Explorer (it was fine to the point 10.2)

  3. can we see the riders started to install, but then he restores and a 'installation failed, cannot find f' appears.

  4 is intended to flow in Q10.

  Anyone got any ideas I can try?

  Found, go to settings > networks and connections > Services connection > USB and drag it to the position USB mass storage Mode on. It will then display as an Ext. hdd in Windows Explorer.

• Vignette to locate some ppsx files are not visible in windows Explorer

  I have windows 7. Thumbnails for some of my .ppsx files are not visible in Windows Explorer, while the other .ppsx files are visible as thumbnails. I have attached a screenshot to show that 8 .ppsx files, 6 display their thumbnails while the 2 only.

  

  Try this option.  Open your file in PowerPoint.  Then go to the file menu.  To the right, choose Properties, and then view the advanced properties:

  

  Make sure that the image 'Save Preview' is turned on:

  

• Help please! After the installation of el capitan, the anchor points are not visible in illustrator CS5!

  After the installation of el capitan, the anchor points are not visible in illustrator CS5. What can I do?

  Sun,

  Outside of this (possible) case, there is no report confirmed the successful performance of CS5 on El Capitan:

  Illustrator CS5 quit unexpectedly in mac os x 10.11.2

  Are you sure that you have shown (alternating with Cmd + H) edges?

• The polygonal Lasso tool - no WARNING WARNING: no pixel is selected more than 50%. The edges of the selection will be not visible.

  I tried for hours without success to snap a portion of a photo by using the tool "Polygonal Lasso" and I get the error "no WARNING WARNING: no pixels are selected to more than 50 percent." The edges of the selection will be not visible.  No matter where you are looking for a solution, it always seems to suggest that you change the "panache".  I did this.  Several times with zero success.  There must be another solution.  Can you help me please?  Thank you.

  Brian Stephens

  You set the pen in the toolbar options to 0 px (zero) before using the Polygonal Lasso tool?

  

• Why I get this message when you use the magnetic lasso tool: "WARNING: no pixel is selected to more than 50 percent."  The edges of the selection will be not visible. ?

  Why I get this message when you use the magnetic lasso tool: "WARNING: no pixel is selected to more than 50 percent."  The edges of the selection will be not visible. ?

  See here:

  WARNING: no pixel is selected more than 50%

• I have a piece of test equipment that is not compatible with Windows Vista 64 - bit edition. Is it possible to go back to the 32-bit version without having to re - install?

  The test equipment is a Site Master S820D used for the test of microwave signals.  It is not compatible with Windows Vista 64-bit, but is with Windows Vista 32 - bit.  Want to know if there is a way to get back to Windows Vista 32-bit, without having to buy a new operating system.  The program is called "Site Master Handheld Software Tools".

  Hello

  If you want to move from a 32-bit version of Windows to a 64 bit version of Windows Vista, or vice versa, you will need to back up your files, then select custom during installation of Windows Vista. Next, you need to restore your files and reinstall your programs

  Use the links below.

  Installation and reinstallation of Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  32-bit and 64-bit Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

• CD/DVD drive not recognized by Windows Vista

  I installed a suite of burningb of CD and DVD on my Toshiba (under Vista Home Premium). My CD/DVD drive appeared more in the computer and was no longer functional. I deleted the program I installed and apparently caused the problem, but it did not help. I have read through the help of Microsoft (929461, 314060) documents and used the Fix - It utility. Also unsuccessful. I discovered the response of Martin, the technical support engineer made on May 5, 2009. I followed his instructions with great success. However, my question now is this: I have still some remains of the problem left over. I get an error message at startup saying, 'InstaBurn UDF driver is not installed correctly. Run the InstaBurn installation program. ' InstaBurn is part of the suite of the copy (hotpics by Nova Development Corp.).  I also have an error message of my reader DVD Toshiba saying that the DVD player does not work - although it is. I played a DVD as a test on it after that I followed the instructions above. How can I remove these error messages annoying that aren't accurate?  Would appreciate any information about this minor - but annoying problem.

  Hello

  Do a Restore Point then you can go back to where you are if necessary although you should not have to:

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ---------------------------------------------------------------

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================================

  Go to Toshiba and download and drivers or programs that affect the CD/DVD drive - Chipset
  and BIOS updates can also play a role.

  For any download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Toshiba downloads - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Then reinstall the programs that you use for this drive.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• sound does not play when windows vista starts or stop

  sound does not play when windows vista starts or stop

  Hello

  • When the issue started?
  • Will there be any changes made prior to this issue?
  • Otherwise, the sound works well?

  Step 1: Refer to "the startup sound is not played correctly when you start Windows XP or Windows Vista
  ' http://support.microsoft.com/kb/321735 '.

  Step 2: To change the sound on closing down.

  Audio a.Open and Sound themes by clicking the Start button, clicking Control Panel, hardware and sound, and then clicking sound.

  b. the sounds tab and then, in the list programs, select the event you want to change the sound.

  c.Under sounds, click the sound you want to associate with the event. If the sound you want to use is not listed, click Browse to locate it.

  'Change the sounds of the computer '.
  ": http://windows.microsoft.com/en-US/windows-vista/Change-computer-sounds "

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

  Question
  better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
  Details

  In current versions of Flash you can also do this via the control panel.

  • Control Panel > Flash Player, click on remove and erase data

• Some software will not work on Windows Vista

  Some software will not work on Windows Vista so I need to install Windows XP
  But how to download drivers for devices such as bluetooth, Lan, his...

  Hello

  I put t know what phone you use, but many Toshiba notebook series are delivered and support similar hardware parts.
  You can simply try to test and install the drivers from different series.

  The new Toshiba Bluetooth stack supports Vista and you can install it on all the laptops Toshiba which supports the feature of BT.
  Sometimes, you will get the chip card driver LAN or compatible Sound on the site of manufacture of chips like Intel, realtek, etc.

• HP Deskjet 1056: HP Deskjet x 64 will not install on Windows Vista

  HP Deskjet 1056 will not install on Windows Vista

  Hello

  Remove the complete software for printer. Download the latest drivers and software from link below and installation of ty.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=372330&

• Adobe Acrobat is NOT COMPATIBLE with Windows Vista... it blocks any browser or operating system when I try to open any PDF... y at - it a patch?

  Adobe Acrobat is NOT COMPATIBLE with Windows Vista... it blocks any browser or operating system when I try to download or open any file PDF... y at - it a patch?

  When I try to open a PDF file in IE 7 or Firefox 3.6, or just on the desktop, I get a sign that says:

  "Program Compatibility Wizard".
  

  "This program has known compatibility issues - check online if the solutions are available on the Microsoft Web site. If we find solutions, Windows automatically displays a Web site that lists the steps, you can take. »

  "Program: . Acrobat Reader 7. Editor: "Adobe,location: C:\Program Files\Adobe\Acrobat 7.0\Reader\AcroRd32.exe.

  "Acrobat Reader 7 has a compatibility issue with this version of Windows. For an update compatible with this version of windows, contact Adobe. »

  "Search for solutions online - Run program - Cancel . "

  If I click on one of the 3 buttons listed above, the browser, it blocks or breaks down the entire operating system.

  Does anyone know of a patch for this... Adobe, what I find, has updated for Acrobat Reader, but they don't say if this is a patch for this problem of Vista incompatibility.

  I searched on the basis of knowledge of Microsoft and this forum and I can't find anything definitive on this question.

  I can not even download a PDF file, and still less open and looking at its content.

  Known fixes?

  Thank you

  NuMetro

  "numetro" wrote in message News: * e-mail address is removed from the privacy * .com...

  Adobe Acrobat is NOT COMPATIBLE with Windows Vista... it blocks any browser or operating system when I try to download or open any file PDF... y at - it a patch?

  When I try to open a PDF file in IE 7 or Firefox 3.6, or just on the desktop, I get a sign that says:

  "Program Compatibility Wizard".
  

  "This program has known compatibility issues - check online if the solutions are available on the Microsoft Web site. If we find solutions, Windows automatically displays a Web site that lists the steps, you can take. »

  "Program: . Acrobat Reader 7. Editor: "Adobe,location: C:\Program Files\Adobe\Acrobat 7.0\Reader\AcroRd32.exe.

  "Acrobat Reader 7 has a compatibility issue with this version of Windows. For an update compatible with this version of windows, contact Adobe. »

  "Search for solutions online - Run program - Cancel . "

  If I click on one of the 3 buttons listed above, the browser, it blocks or breaks down the entire operating system.

  Does anyone know of a patch for this... Adobe, what I find, has updated for Acrobat Reader, but they don't say if this is a patch for this problem of Vista incompatibility.

  I searched on the basis of knowledge of Microsoft and this forum and I can't find anything definitive on this question.

  I can not even download a PDF file, and still less open and looking at its content.

  Known fixes?

  Thank you

  NuMetro

  FAQ Adobe "Acrobat 7.0 and earlier versions do not support Windows Vista. Adobe does not plan to release updates to Acrobat 7.0 and earlier for Windows Vista compatibility. «You'll need to level of Acrobat 9 (or later) to ensure full compatibility with Vista and Win 7.»

• KeyCode not saved in Windows vista

  Original title: WINDOWS PROBLEM Please HELP?
  I TURNED ON MY DESK TONIGHT, BUT IT NOT GO TO THE SPLASH SCREEN.  INSTEAD, HE WANTED ME TO GET MY THE KEY CODE [THAT WAS WEIRD] BUT I DID.   NOW ITS ME ALWAYS SAYS THAT «KEYCODE NOT SAVED IN WINDOWS VISTA»  I'VE UPGRADED TO VISTA XP I THINK A WEEK AGO.                                                                                                                                                                                     AND FOR THIS REASON, I CAN'T ACCESS MY MENU EVEN START TO KNOW SOMETHING ABOUT WHAT IS GOING.   Help, please?

  Hello

  Thanks for posting in the Microsoft community!
  If I understand correctly, you receive error message that keycode not saved in Windows vista when you have turned on the computer

  You can get in touch with the Microsoft Customer Service:

  How and when to contact Microsoft and support Customer Service
  http://support.Microsoft.com/kb/295539

• HP Photosmart D110 printer will not install with Windows Vista?

  HP Photosmart D110 printer will not install with Windows Vista?

  Hello

  (1) what happens when you try to install the printer?

  (2) you get an error message?

  Method 1: You can run the fixit available in the link below and check to see if that makes a difference

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  You might want to know

  Add or remove a printer

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.