Text that appears distorted on the screen

Similar Questions

• How to make text appear darker on the screen?

  The text on the screen is gray.  Here the words to find more dark & appear more clearly on the white background.

  Hello

  From your problem description, I understand that you want to customize the display settings so that the text should appear darker on the screen.

  What is the brand and model of your monitor and your computer?

  We cannot change the font color of desktop. They are dynamic and show white on dark background and change in white with a shadow effect black on a light background.

  I suggest you refer to the suggestions below and check it it helps.

  Method 1:

  a. type click Calibrate display color, in the search box and press press Windows key + W (it will be charming setting pop-up Windows 8), Enter.

  b. calibration color screen, click Next to continue.

  c. follow the instructions on the screen and check if it improves the display of your monitor.

  Method 2: I suggest you to refer to the manual of the monitor and adjust the brightness, the contrast of different values.

  Also check out this link:
  Get the best display on your monitor

  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  Hope the above information is helpful.

• Icons and black screen that appears when published the missing LMS

  Hello

  I tried to search online, but need some advice on how to solve a problem of publication I encounter.

  Captivate 7

  SCROM 1.2

  When I run a SWF file via my IE browser, I have no missing icons or black screen that appears. During the generation of the content to publish SWF with HTML5, it passes through successfully.

  When it is published through LMS, couple of slides in the length of the content, I am facing some missing icons and black screen. I read an article saying check on imsmanifest.xml that could help solve the problem. But watch and read the code, I am pretty well confused to determine what lack us here.

  Comments or the recommendation how I can solve this problem?

  Concerning

  AJ

  Publish your Cloud SCORM LMS SCORM online and test the functionality here.  If he plays as expected, the problem is with your own LMS and you must get their technical staff working on the problem.

• Tecra M2 does not start successfully - zeroes appear all over the screen

  Help!

  My Tecra M2 does not start. After the toshiba logo, a series of zeros (0) appear all over the screen.

  -suspect it is caused by a virus, I formatted the HD (in another PC), but still the zeros appear
  -I might want to start in the DVD player, it seems to read the disc, but nothing happens, just a cursor flashing at the top left of the screen
  -J' I reset / replaced the RAM, but still no effect.
  -the power button works, lights and shuts the laptop but does not start.
  -CPU fan works
  -LED indicators of work are power, battery, dvd, wireless. Does not have HD LED light on.

  Any suggestions on how to solve this problem is greatly appreciated.
  See you soon!

  Hello

  I think we can exclude HARD disk failure because you are able to format it in another computer.
  As you suggest the RAM modules has been replaced but the problem persists
  So in my opinion, a motherboard problem would be possible

  But as you know, it of really difficult to say what might be exactly wrong
  I think that the technician should check the laptop then it would be possible to say what part is malfunctioning

  In any case, I think a motherboard might be affected

• How can I get rid of non-existent drive (local disk Q :) that is displayed on the screen of my computer?

  original title: How do I get rid of non-existent hard disk that appears on my computer screen?

  I have a local disk (q) that loads automatically on my folder "Computer" [the folder that shows all hard drives and peripheral storage removable]. The drive does not exist and when I double click above it says "Q:\\ is not accessible access is denied." I unplugged my external hard drives, and these drives disappear from the screen by this disc remains still.  How can I get rid of him?

  I found an article from third party in which people have found a solution:

  Hide the Local disk (q) added by Office 2010 Beta

  I hope this helps! (you can back up the registry first)

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How the style of text that is placed between the space characters

  Via a paragraph style sheet, I need apply character styles to text that is enclosed in the white spaces.

  For example:

  The cat < < thinspace > > Sam < < thinspace > > on < < enspace > > < < enspace > > Carpet

  In the light of the foregoing, "Sat" would have a character style while "Mat" will be another.

  What is the best way to achieve this?

  I know that Indesign has GREP styles, but that doesn't seem to work with the text placed between the space characters.

  The only reason why I am using space characters is also because they are invisible when printing.

  Is there another method for the text wrapping to tag as needing to be marked with a style?

  Thank you!

  Peter Spier says:

  Where is Jongware when we need him?

  By working?

  I don't find anything wrong with the styles available in CS6, it is defined locally or in a style. Maybe there was an invisible error in the original style of GREP - say, something like a space at the end.

  I agree with Peter, however, you might want to try other codes. Because

  The only reason why I am using space characters is also because they are invisible when printing.

  This is not the case... quite true. Of course, you don't see any markings on paper (or screen), but you pouvez see space between words is smaller and more!

  But do not limit yourself with "invisible" codes You can use this trick to emulate type HTML styling: http://indesignsecrets.com/using-grep-styles-to-format-html-code-in-indesign.php

  A big advantage is that with a click of a button, you can still get the visible 'invisible' codes. Just disable the GREP style that masks the codes or change its character style.

• Text + Image of flight on the screen

  Very new to Adobe Premiere Elements 10 so this is probably a stupid question...

  How can I make text and pictures fly over the screen? I did credit rolling to the end, but the beginning I just want the logo and a text that cross the screen.

  Its so easy in imovie but I can't do it in Premiere Elements. I use it on a pc by the way.

  Thanks a lot for any help

  Kirsty

  Kristy,

  Welcome to the forum.

  These effects are easily animated Clips securities with keyframes. Usually, we'll start at least in working with the fixed effect > Motion > Position and Keyframing it over time.

  While the actual work is easy, must one get a handle on the concept of effects of keyframes. Steve Grisetti, our tireless MOD, is a multi-part series of Learning based Keyframing, available on Muvipix.com. I'm doing the nto recall if this particular series is free for all, or only for subscribers. This will give you a big head start with the concepts.

  There is a similar thread, exactly what you want to do and was posted quite recently. I'll look, Steve and I go into a little more detail. In the meantime, check out Muvipix.com and read the entries on 'Keyframes' in the help file.

  Good luck and make account comes with a link to that topic soon.

  Hunt

• Whenever I click on ftp fire that it disappears from the screen, how do I find it again.

  To load up my web site, I use firefox ftp it keeps disappearing and I can have access to it even though I know that the program is on my computer

  Original title: I'm using firefox FTP I used it for years. All of a sudden whenever I click on ftp fire that it disappears from the screen how can I find it again.

  Hello

  You did changes to the computer before the show?

  I suggest you return the item for more information about the issue:

  Support

  http://FireFTP.mozdev.org/help.html

  I hope this helps.

• You can turn off text location that appears below on the left for links in Firefox 4?

  The text box that appears when your mouse over a link and it shows the location in the lower left corner. Can disable you that? I find it boring.

  The easiest way is to use the add-on of status-4-Evar. With it, you can choose to not display the messages State or links, or display them in the bar modules or the address bar instead.

  https://addons.Mozilla.org/firefox/addon/status-4-EVAR

• The images appear when printing that are not on the screen

  Sorry if this has already been covered - I can't find an answer with any of my research...

  I use Indesign CS3 in a Vista environment.

  I created a document in CS3 that contains images tiff, jpeg and pdf placed in it.

  Everything looks fine on the screen, but when I print a test in black and white on my HP laserjet pages contain an image where a 'ghost' of the image above it on the page is printed on it.

  "Ghost" images are always compensated by about 1/3 - 1 / 2 of the picture, they are printing on and disappear if I move the image of the 'ghost' comes off on the side.

  The "ghost" does not appear on pages where there is one picture above the other, does not seem to be limited to some combination of file types.

  It is not on the page outside a rectangle areas encompassing.

  I've tried mucking around with some print settings, but my knowledge is a bit limited in this area.

  This happens if I print all right out of InDesign or if I export the document as a pdf and print from that.

  I've never had this problem before using previous incarnations of this software and you want to go coloring print until I know if this might just be an artifact of the test B + W printing process, or if it's something else.

  Thanks for your help.

  Mingstru.

  First the good news. It's not your software, everything works fine.

  Now, the bad news; It's the printer... the easiest way to make sure is to print it on a different printer.  The fact that you barely notice it's probably because your pinter gets older, or need some replacement of consumables.

  As to how to solve this problem there are not that many, you can do it, you might try to print either way up, according to your location of the image, it would be not so sensitive.

• Changing the text that appears in a cross reference

  Hi, I'm kind again in this cross reference something set and I'm doing something that doesn't work, I tried a few things and did some research but nothing has really helped me.

  So I work in a book, and we have several exercises (exercise 4.1.4.2, 4.x and so on) that works with the ball and the numbering style. We refer to them in the text, so I wanted to my reference to say "(do l'exercice X à la page XX) but when I link the cross reference, since the original exercise is written with a letter from cap (year X) well, he wrote"making the exercise page XX X) "

  I read that we cannot force in small character in ID (hoped to apply a simple character style) so there at - it another way to make this work?

  I can change it manually, but then it appears a conflict in the Panel cross references

  To make it more simple, I just want the exercise automated 4.X to write exercise 4.X, is it possible?

  Otherwise, I will pray for a "tiny" for CS6 style option...

  Thanks in advance

  

  I don't do much with the refs (tried it out on the last project, however), but I think your problem is that you must change the type of anchor text anchor point, you need to create from hyperlinks context menu > new Destination of the hyperlink...

• The text on the home page that appears smaller than the pages of blog

  Currently I'm trying to hit a few html pages using CSS for my blog.  It is as I have a portfolio of my own work in front of the site corresponding to the appearance of my blog.

  The problem is that I can not the body of the text on the home page to match the body of the text in the blog. For some reason any, it seems smaller, still images line up well on all browsers.

  http://www.movingpictureTV.com -Press 'Moving Picture TV' to see the size of the text change

  Someone at - it a cure?

  you work with em that can be difficult sometimes if you don't pay close attention to the parent controls.

  simple solution in your case.

  In your mptv_styles.css just add make-size: 1.2em; for your #sidebar. This should solve.

• Can I format the text that appears in a browser window, triggered by a PHP script?

  My PHP processing script form sends emails perfectly.

  Can I use online HTML tags for formatting the text thanks that is generated by the script on presentation and displayed in a new browser window.

  Here is the corresponding PHP code

  ? >

  <!-success html below - >

  Please contact us. We will be in touch with you very soon. Use your back button to return to our Web site.

  <? PHP

  }

  Die();

  ? >

  Yes, you can. Try it.

  In fact, your thanks is not yet in the PHP code because you stop PHP in front of her and then restart PHP after.

  You could also write it like that (I won't say one way is better than the other):

  <>

  success html below

  ECHO '.

  Please contact us. We will be in touch with you very soon. Use your back button to return to our Web site.

  ";

  }

  Die();

  ?>

• Distortions of the screen when using Firefox on Android

  Hi, a recurring problem - when using Firefox on my Android Web site, are often distorted. If I try to zoom before to increase the size of police or image during playback, the screen breaks and distorts, with different sections of text and images disappear (black sections of the screen appear) or overlapping, often in a different font sizes. The Web site displayed on the screen as "jumps around." The same thing happens if I try to select text for copy - it is impossible to select all or selection is distorted. I have not had this problem before and noticed only recently. Almost impossible to use the browser now! What is the result of an automatic update of the software? Help, please! Thank you.

  Please try to update to Firefox 38.

• Text messaging alerts? As the screen coming or flashing light?

  I'm legally deaf and can't hear the phones, I use these phones PDA, SMS and e-mail.
  When I had my Blackberry and iPhone, Black-Jack, there aps or programs that you could buy that would turn the display when you receive a text email. There is a flashing light or the screen will light up and stay lit for a certain period of time.

  They have something like that for this phone? Or is their a hack that can be done to it?

  I use the vibration when it is in my pocket, but I need something for when he throws on the desktop.

  Here are a few links on the Android 2.1 update:

  • Release notes for Motorola (PDF file)
  • User manual (PDF file)
  • Motorola Page basics
  • Announces at & T
  • Download/installation of upgrade page - I recommend the method "preferred." It is to download the upgrade file and copy to sd card from your phone.
  • Motorola Backflip with Android 2.1 Troubleshooting page

  Once you get installed 2.1 setting the led is:

  Menu-> settings-> sound & display settings

  Check the notification LED.

  Lack of recall and an easy reminder that both should run on the Backflip.

  I did not use Handcent for some time, but I think it can be set to repeat reminders.

  ----
  I'm a volunteer. The MotoXprt tag means that I spend too much time here. The views expressed in my posts are mine. I am owner of a Backflip and a setback. If my opinion doesn't have any sense - ignore it!