Than return the behavior of Firefox to focus on a new tab empty? Not the same as opening a link in a new tab.

Similar Questions

• How to shrink a picture to fit a model without losing the proportions of photos? When I pull the smaller image, it will lean or wide rather than staying the same but smaller...

  How to shrink a picture to fit a model without losing the proportions of photos? When I pull the smaller image, it will lean or wide rather than staying the same but smaller...

  Nice day!

  When turn you the image permanently the SHIFT key to keep the proportions or perhaps use file > Automate > Fit Image.

  Kind regards

  Pfaffenbichler

• Is it possible to have multiple windows of the same file open?

  Hello

  I was wondering if it is possible to have multiple windows of the same file open at the same time in Windows XP?

  Thank you!

  Dave

  You're welcome, Dave. If you click directly on a file, it will be open only once.  That's why I gave an example of starting with work stations and by navigating to the folder (open indirectly).  You can access a the desktop folder in C:\Documents and Settings\\Desktop.
  Boulder computer Maven
  Most Microsoft Valuable Professional

• Multiple count() returns the same table?

  Hi all
  I have to count number of invoices (several million) related to contracts (aprox. 75000 entries). When I try
  
  Select contract.number, count (bill.id), count (a.id)
  contract, invoice, charge a
  where bill.contractid = contract.id
  and bill.type = 0
  and a.contractid = contract.id
  and a.type = 1
  
  the result of count (a.id) is always the same as count (bill.id). Knowing well that this is wrong, I tried to change the count() in own - select statements, but this does not help and the performance is less than mediocre.
  
  Does anyone have an idea to get the correct inventory results with a decent return?
  
  Thank you Carsten

  You need a group by, not a join double...

  select contract.number,bill.type, count(0)
  from contract,bill
  where bill.contractid = contract.id
  and bill.type in (0,1)
  group by contract.number,bill.type
  

  Or if you want the two types on the same line:

  select contract.number,sum(decode(bill.type,0,1,0)) TYPE0, sum(decode(bill.type,1,1,0)) TYPE1
  from contract,bill
  where bill.contractid = contract.id
  and bill.type in (0,1)
  group by contract.number
  

  Max

  Published by: Massimo Ruocchio on November 30, 2009 15:12
  Second option added

• NotificationsDialog returns the same value for the two buttons

  I have a NotificationsDialog with two SystemUiButtons, now when I click on buttons and console the result they both return the number two, I don't really understand why.

  {NotificationDialog}
  ID: alertdialog
  Title: "Alarm" - + alarmTime
  body: Setting.get ("alarmCompletedMessage")
  repeat: true
              
                  
  buttons:]
  {SystemUiButton}
  label: "Stop".
  },
  {SystemUiButton}
  label: "Snooze."
  }
  ]
  onFinished: {}
  Console.log ('result' + result)
  Console.log (Error)
  }
  }

  Is there a better way to identify which button has been activated?

  Wish a little, she supported confirm and Cancel buttons, or SystemUIButtons have their own onClicked properties

  Thank you

  Use buttonSelection () instead of the result .label

• Shouldn't be using WITH return the same results as if you would first put the results in a table?

  First of all, here is my version info:

  BANNER

  --------------------------------------------------------------------------------

  Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production

  PL/SQL Release 11.1.0.7.0 - Production

  CORE Production 11.1.0.7.0

  AMT for HP - UX: 11.1.0.7.0 - Production Version

  NLSRTL Version 11.1.0.7.0 - Production

  I just re-read the documentation of the subquery factoring clause of select again and I saw no restriction that applies.

  Can someone help me understand why I get different results?  I would like to be able to use the statement that creates spades3, but for some reason it does not work.  However, when I break up and store the last subquery TMP in a table (MAT1), I am able to get the expected results in MAT2.

  Sorry if the example seems a bit esoteric.  I tried to put something together to help illustrate another problem, so it was more convenient to use the same instructions to illustrate this problem.

  drop table mat1;
  create table mat1 as
  with skus as (
    select level as sku_id
    from dual
    connect by level <= 1000
    ),
    tran_dates as (
    select to_date('20130731', 'yyyymmdd') + level as tran_date
    from dual
    connect by level <= 31
    ),
    sku_dates as (
    select s.sku_id,
    t.tran_date,
    case when dbms_random.value * 5 < 4
    then 0
    else 1
    end as has_changes,
    round(dbms_random.value * 10000, 2) as unit_cost
    from skus s
    inner join tran_dates t
    on 1 = 1
    )
  select d.sku_id,
    d.tran_date,
    d.unit_cost
    from sku_dates d
    where d.has_changes = 1
  ;
  
  
  drop table mat2;
  create table mat2 as
  select m.sku_id,
    m.tran_date,
    m.unit_cost,
    min(m.tran_date) over (partition by m.sku_id order by m.tran_date rows between 1 following and 1 following) as next_tran_date
    from mat1 m
  ;
  
  
  drop table mat3;
  create table mat3 as
  with skus as (
    select level as sku_id
    from dual
    connect by level <= 1000
    ),
    tran_dates as (
    select to_date('20130731', 'yyyymmdd') + level as tran_date
    from dual
    connect by level <= 31
    ),
    sku_dates as (
    select s.sku_id,
    t.tran_date,
    case when dbms_random.value * 5 < 4
    then 0
    else 1
    end as has_changes,
    round(dbms_random.value * 10000, 2) as unit_cost
    from skus s
    inner join tran_dates t
    on 1 = 1
    ),
    tmp as (
    select d.sku_id,
    d.tran_date,
    d.unit_cost
    from sku_dates d
    where d.has_changes = 1
    )
  select m.sku_id,
    m.tran_date,
    m.unit_cost,
    min(m.tran_date) over (partition by m.sku_id order by m.tran_date rows between 1 following and 1 following) as next_tran_date
    from tmp m
  ;
  
  
  select count(*) from mat2;
  select count(*) from mat3;
  
  
    from tmp m
  ;
  

  select count(*) from mat2;
  select count(*) from mat3;
  

  Select count (*) from mat2;

  COUNT (*)

  ----------

  31000

  Executed in 0,046 seconds

  Select count (*) in spades3;

  COUNT (*)

  ----------

  0

  Executed by 0,031 seconds

  Hello

  Khaled says:

  The problem is with

  -case when dbms_random.value * 5<>

  You can change this

  dbms_random. Value (1,100) * 5<>

  and test

  I don't know that I agree 100% with your police department, work there.

  dbms_random. Value, no arguments, returns a random number between 0 (inclusive) and 1 (exclusive), so

  dbms_random. Value * 5< 4 ="" will="" be="" true="" about="" 80%="" of="" the="">

  dbms_randon. Value (1, 100) returns a random number between 1 (included) and 100 (exclusive), so

  dbms_random. Value (1, 100) * 5< 4="" will="" be="" true="" exactly="" 0%="" of="" the="" time,="" which="" is="" not="" what="" op="" wants="" at="">

  The problem here apparently revolves around the optimizer not really call dbms_random over and over again in sku_dates of the subquery.  Add ROWNUM in the subquery seems to force Oracle to assess dbms_random.value immediately.  I don't really understand myself, but adding 1 element in the SELECT of the sku_dates subquery clause could solve the problem:

  create table spades3 as

  with references like)

  Select the level as sku_id

  of the double

  connect by level<=>

  ),

  tran_dates like)

  Select the level + to_date ('20130731', 'YYYYMMDD') as tran_date

  of the double

  connect by level<=>

  ),

  sku_dates like)

  Select s.sku_id,

  t.tran_date,

  -case when dbms_random.value * 5<>

  then 0

  1 other

  end as has_changes,

  Round (dbms_random.value * 10000, 2) as unit_cost

  ROWNUM AS r-<=== new="" column="" added="" here="" new="" column="" added="">

  s SKUs

  inner join tran_dates t

  1 = 1

  ),

  tmp as)

  Select d.sku_id,

  d.tran_date,

  d.unit_cost

  of sku_dates d

  where d.has_changes = 1

  )

  Select m.sku_id,

  m.tran_date,

  m.unit_cost,

  min (m.tran_date) over (partition by order of m.sku_id by m.tran_date rows between 1 next and 1 suite) as next_tran_date

  of tmp m

  ;

  You do not have to refer to this column anywhere; just having him in the subquery is enough.

  If someone can't understand why, I know it.

• return the same value defined in a group.

  All,
  I have the below requirement,
  
  I had a table (deptid, deptname, address, city, zip, State, other columns) I want to write a query to determine any errors (records with different values) because I expect all records grouped by(deptid, deptname, address,city,zip, state) to have the same deptid (Please note that deptid is not unique).
  
  or a specific deptid should have only one record based on the groupping (deptid, deptname, address, city, State, zip).
  
  any suggestion? Thank you.

  One way to check is to check for a Unique Deptid deptname combination, address, city, zip, State;

  In this way, you will get all the combination deptname, address, city, zip, Associate State with more than 1 dept_id. However, if one of these have different value, then you are bound to get several lines and thus false positives.

  select deptname, address,city,zip, state, count(distinct dept_id)
    from dept_table
  group by deptname, address,city,zip, state
  having count(distinct dept_id) > 1
  

  How about you, you give us the structure of the Table and a few examples of data as well as the expected release of him. It will help us giving you the good request that fits your needs.

• 2 queries must return the same result (but they are not...)

  Hello
  I have a query:
  

  select col1,extract(year from datum) yr, COUNT(*)
  from tableA@dblink where
  DATUM between '1-jan-1985' and '31-dec-2012'
  and col2 > 100 and col2 not in ('999999')
  and TRIM(TO_CHAR(col1)) in ('0','1')
  group by col1,extract(year from DATUM);

  the query above returns the number: 143 982 for the year 1991
  However, when I put the filter directly in this year the request returns a different number: 143 917
  

  select col1,extract(year from datum) yr, COUNT(*)
  from tableA@dblink  where
  DATUM between '1-jan-1991' and '31-dec-1991'
  and col2 > 100 and col2 not in ('999999')
  and TRIM(TO_CHAR(col1)) in ('0','1')
  group by col1,extract(year from DATUM);

  Please can you help me understand why what is happening and why these 2 heads are different?
  ID appreciate any advice
  Thank you very much
  Rgds

  Try these...

  select col1,extract(year from datum) yr, COUNT(*)
  from tableA@dblink where
  trunc(DATUM) between to_date('1-jan-1985','dd-mon-yyyy') and to_date('31-dec-2012','dd-mon-yyyy')
  and col2 > 100 and col2 not in ('999999')
  and TRIM(TO_CHAR(col1)) in ('0','1')
  group by col1,extract(year from DATUM);
  

  select col1,extract(year from datum) yr, COUNT(*)
  from tableA@dblink  where
  trunc(DATUM) between to_date('1-jan-1991','dd-mon-yyyy') and to_date('31-dec-1991','dd-mon-yyyy')
  and col2 > 100 and col2 not in ('999999')
  and TRIM(TO_CHAR(col1)) in ('0','1')
  group by col1,extract(year from DATUM);
  

• Return the same row with 2 different queries

  Can I set up a hint of context that will allow me to do a search on '21-12345' or '21 & 12345' and have the same return line?

  There are various ways you could do this. You could create a lexer which sets the hyphen as white space, so that the chips would be indexed separately. However, the hyphen has a special meaning in the Oracle text. This means less, so if you search for "word1-word2" score by searching "word2" in the document and who subtracted from the score obtained by searching for "word1" in the document. If you want to treat the hyphen as a regular character without meaning of the Oracle text then you need to escape by placing a backslash immediately seized. Similarly, the ampersand has a special meaning; This means and. So, if you search for 'word1 & word2' will be produced documents with the "word1" and "word2" in there. Please see the demo below.

  SCOTT@orcl_11gR2> -- test environment:
  SCOTT@orcl_11gR2> create table your_table
    2    (clob_column  clob)
    3  /
  
  Table created.
  
  SCOTT@orcl_11gR2> insert into your_table (clob_column)
    2  values ('21-12345')
    3  /
  
  1 row created.
  
  SCOTT@orcl_11gR2> insert into your_table (clob_column)
    2  values ('21 & 12345')
    3  /
  
  1 row created.
  
  SCOTT@orcl_11gR2> insert into your_table (clob_column) values
    2  ('some other data you do not want just for testing')
    3  /
  
  1 row created.
  
  SCOTT@orcl_11gR2> begin
    2    ctx_ddl.create_preference ('your_lexer', 'basic_lexer');
    3    ctx_ddl.set_attribute ('your_lexer', 'whitespace', '-');
    4  end;
    5  /
  
  PL/SQL procedure successfully completed.
  
  SCOTT@orcl_11gR2> create index your_index
    2  on your_table (clob_column)
    3  indextype is ctxsys.context
    4  parameters ('lexer your_lexer')
    5  /
  
  Index created.
  
  SCOTT@orcl_11gR2> select token_text from dr$your_index$i
    2  /
  
  TOKEN_TEXT
  ----------------------------------------------------------------
  12345
  21
  DATA
  OTHER
  TESTING
  WANT
  
  6 rows selected.
  
  SCOTT@orcl_11gR2> set define off
  SCOTT@orcl_11gR2> select *
    2  from   your_table
    3  where  contains (clob_column, '21\-12345') > 0
    4  /
  
  CLOB_COLUMN
  --------------------------------------------------------------------------------
  21-12345
  21 & 12345
  
  2 rows selected.
  
  SCOTT@orcl_11gR2> select *
    2  from   your_table
    3  where  contains (clob_column, '21 & 12345') > 0
    4  /
  
  CLOB_COLUMN
  --------------------------------------------------------------------------------
  21-12345
  21 & 12345
  
  2 rows selected.
  
  SCOTT@orcl_11gR2>
  

• Subquery returns the same value but no returnet lines

  HY all
  
  First of all excuse me for my English. I know that is very bad.
  
  I have a very annoying problem...
  
  I habe a query like this
  
  Select the car of cars where car_color = (select color color where car_id = '5452')
  
  My real Qery is mor complicated, but this is how it works.
  
  Now the problem:
  
  If I run the first query select car of cars where car_color = 'black' the query returns a value.
  
  If I run the subquery *(select color from Colors where car_id ='5452') * the subquery returns a value (black)
  
  If I run the query and subquery select car of cars where car_color = (select color color where car_id = '5452')
  I get no value :(
  
  How this bee? If I take the (black) result of the subquery, and paste of STIs in the first request, then I get a value.
  But if I use the two querys it works.
  
  Thank you for your support
  
  Welcomes Burillo

  user13568585 wrote:

  I can see that the results are not the same, but how can it happen?
  Without your thing, I'll never be able to see the problem. Toad is really stupid as I think?

  It has nothing to do with the toad. You will get the same results in SQL * more. Most of the tools on the client side display the nonprinting characters such as spaces. And in your case, string returned by the subquery has had new line at the end. Anyway, the other way to understand would compare dumps of returned strings:

  select DUMP(LTRIM(RTRIM(rem.PSTREM_KURZ_BEZ))) from p_pveps_episode eps,  p_pvrep_re rep, p_strem_rechempf rem
  WHERE
  eps.allmnd_mandant='Test' and
  eps.ppveps_aufnr='101224' and
  eps.allmnd_mandant=rep.allmnd_mandant and
  eps.ppveps_epsnr=rep.ppveps_epsnr and rep.pstrem_ident=rem.pstrem_ident -- {and ltrim(rtrim(rem.PSTREM_KURZ_BEZ)) =} quotet to show result
  

  SY.

• : Nom_element and V ('ITEM_NAME') do not return the same value

  Hi all
  
  I'm developing a shared application process that is called by an AJAX request.
  
  For the pl/sql code, stored procedure validation e development support I moved the logic inside a database.
  So I have this situation:
  
  Application process
  
  ...
  : MYITEM: = wwv_flow.g_x01; -received setting of ajax call I want to put
  ...
  MY_FUNCTION();
  
  MyFunc
  
  ...
  v('MYITEM') - here I use value MyItem
  ...
  
  The problem is that when I call v ('MYITEM') the value I get is the previous and not one that I put with: MYITEM: = wwv_flow.g_x01;
  I have the same problem if I set the V ('MYITEM') inside the apex application process.
  
  I saw that it worked right if I use the following to set the value of the element in the application process:
  
  APEX_UTIL. SET_SESSION_STATE('P0_LST_DATA',:P0_LST_DATA);
  
  Is this a bug?
  I was expecting to get the value of the item: MONELEMENT and v ('MYITEM') are equivalent...
  
  Thank you
  Davide

  Davide,

  If you encode the block like that, you should get the results you expect:

  : P100_VAR1: = '1'. : P100_VAR1;
  : P100_TEST: =: P100_VAR1;

  The reason why this block does not give you what you expect:

  : P100_VAR1: = '1'. : P100_VAR1;
  : P100_TEST: = v ('P100_VAR1');

  ... is that v ('P100_VAR1') returns the current value of the item in the table of PL/SQL State session as it existed before the execution of the block. The assignment to the variable binding: P100_VAR1 has registered only a value in storage variable to bind the dynamic execution at this time and has not yet spread to session state, which is located at the end of the execution of the block. It's a little weird, we know.

  Andy,

  I figured that the: xxxx points have been settled during the loading of the page with what the source is...

  They contain the session state value and can be read or written in notation variable bind.

  However, they are updated only in the session when you send page...

  They are updated in session state when the particular block is completed and a commit is issued at this time there.

  In order to update a piece of code PL/SQL session state, you must use... apex_util.set_session_state.

  You must be careful to call it when scoring also bind variable to set the session state may cause one to deny the other. Using one method or the other should work very well.

  Scott

• WINDOWS LIVE MAIL CONTINUES TO RETURN THE SAME EMAILS AGAIN AND AGAIN TO THE SAME PEOPLE AND ME!

  Last night, I sent two emails to two people and noticed that I was getting the same email back to my account in WindowsLive Mail over and over again.

  My friend told me that she got the same two emails 200 times! So I closed WindowsMail and I stopped getting emails, then I opened it and he started new flooding my e-mail account.

  I closed it down once again and now it's the next day and I need to get that into account since I mail filed into folders for my business. How can I solve this problem? Thank you.

  Go to file | Work offline in Windows Live Mail and then go to the Outbox and delete messages in it.  If you still have questions, ask here: www.windowslivehelp.com
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  Last night, I sent two emails to two people and noticed that I was getting the same email back to my account in WindowsLive Mail over and over again.

  My friend told me that she got the same two emails 200 times! So I closed WindowsMail and I stopped getting emails, then I opened it and he started new flooding my e-mail account.

  I closed it down once again and now it's the next day and I need to get that into account since I mail filed into folders for my business. How can I solve this problem? Thank you.

• Why this query SQLLite returns the same all the time?

  Hello

  I use a search box to accept a query on three columns and am page before based on the last record, which in this case is Run Baby Run by Loopy

  I know for a fact that the database has a song inside by Loopy called Straight Down the Line, so this should at least be showing that. But it does is display the same songs again.

  Can someone explain the error in my logic here?

  SELECT * WHERE DiscID AS "loopy %" songs or artist LIKE 'loopy %' or AS "loopy %" title AND artist > = 'LOOPY' COLLATE NOCASE Title > = 'Run Baby Run' COLLATE NOCASE ORDER BY artist COLLATE NOCASE ASC, title COLLATE NOCASE ASC LIMIT 20

  Thanks for taking a peek.

  This is a forum for AS3, not SQL - etc., which may explain the slow Pickup on your ad.  While someone might offer something at some point, you should try to find a forum where they discuss SQL programming, which could mean going out of the domain of Adobe.  The closest thing I can think that would be a forum in the Adobe forums game...

  http://forums.Adobe.com/community/Dreamweaver/server_side

• decrypt not returns the same value that encrypt

  Hi all
  Please help if you have encountered this problem before or have any brilliant suggestion to my question below.
  
  I try to encrypt the value "4120166668", insert in the database, and then decipher that it appears on the system. It seems that the value "4120166669" appears. Build an example of code that is not complete database, and it still does not work.
  
  But if I exert the ToBase64() function then encrypt, as well as decrypt and then run tostring (tobinary ()), it works. The thing is, if I change that, the rest of encryption is stored in the database will have error when the display on the system because it uses the same encrypt and decrypt the value.
  
  How should I go about this? Does anyone have suggestions or other ways? And I really want to know what causes this problem to occur.
  
  See you soon,.
  Jamie
  

  delete the part of the encrypted value (chr 10/newline at the end of the value). Delete this Trim() and you can convert without problem.

  CR

• I am trying to open a simple HTML5 document containing MP4 video without result. Why the same document open in, for example, Chrome?

  Small sample code (with delimiters modified to avoid the parking) which opens in Chrome but not im FF5.0:

  <!DOCTYPE html>
  <html lang="en">
  <head><meta charset="UTF-8"><title></title></head>
  <body>
  <video controls src="videofile.mp4">
  </video>
  </body>
  </html>

  The above code file and the video file mp4 are in the same folder.

  Firefox does not support MP4 via the video tag.

  • https://developer.Mozilla.org/en/Media_formats_supported_by_the_audio_and_video_elements
  • https://developer.Mozilla.org/en/Configuring_servers_for_Ogg_media