That includes the support of product recovery cd?

Similar Questions

• Is it possible for an index that includes the condition 'GOLD '?

  Hello, I have a few questions.

  The test was conducted in the following procedure.

  ################################
  create table test
  (
  VARCHAR2 (10) C1.
  C2 varchar2 (10),
  key (c1) elementary school

  );

  create index test_idx1 on test (c2);

  Command > explain select * test where c1 = 'JOHN' or c2 = "JOHN";

  Query optimizer plan:

  STEP: 1
  LEVEL: 1
  OPERATION: RowLkRangeScan
  TABLENAME: TEST
  IXNAME: TEST
  CONDITION INDEX: < NULL >
  NOT INDEXED: TEST. C2 = 'JOHN' OR TEST. C1 = 'LUCY '.

  Command >

  
  Command > explain select * test where c1 = 'LUCY' and c2 = "ABDELLAH.

  Query optimizer plan:

  STEP: 1
  LEVEL: 1
  OPERATION: RowLkRangeScan
  TABLENAME: TEST
  IXNAME: TEST
  INDEXED CONDITION: TEST. C1 = 'ABDELLAH.
  NOT INDEXED: TEST. C2 = "ABDELLAH.

  Command >
  ################################

  By adding the status of "GOLD" in this test does not use the index.

  Is it possible for an index that includes the condition 'GOLD '?

  Thank you.

  GooGyum.

  A database can generally use indexes in this way for one 'or' with two different columns. However, for this example specific can easily rewrite the query using 'UNION' to use the relevant hints while still giving the same result (correct):

  Command > explain select * from t1 test where t1.c1 = 'LUCY' union select * test t2 where t2.c2 = "JOHN";

  Query optimizer plan:

  STEP: 1

  LEVEL: 1

  OPERATION: RowLkRangeScan

  TABLENAME: TEST

  IXNAME: TEST

  INDEXED CONDITION: T1. C1 = 'ABDELLAH.

  NOT INDEXED:

  STEP: 2

  LEVEL: 2

  OPERATION: RowLkRangeScan

  TABLENAME: TEST

  IXNAME: TEST_IDX2

  INDEXED CONDITION: T2. C2 = "ABDELLAH.

  NOT INDEXED:

  STEP: 3

  LEVEL: 1

  OPERATION: OrderBy

  TABLE_NAME:

  IXNAME:

  INDEXED CONDITION:

  NOT INDEXED:

  STEP: 4

  LEVEL: 2

  OPERATION: UnionMergeSort

  TABLE_NAME:

  IXNAME:

  INDEXED CONDITION:

  NOT INDEXED:

  Maybe you can apply something similar? If you know that there is no possibility of duplicate lines then you can optimize it (in terms of performance) by using UNION all.

  Chris

• Does anyone know how to change the composition of Adobe Creative cloud AE single app to the student member that includes the creation?

  Does anyone know how to change the composition of Adobe Creative cloud AE single app to the student member that includes the creation?

  Hi Danielle,

  Thanks, I tried to do but unable to communicate with anyone.

  Here you go: Contact customer service

  Thank you

  Kevin

• Air for Android 16.0 - cannot use the native extension that include android-support-v4 - ClassNotFoundException

  Hello

  This is my first question here, and I really need help on this problem. We are been struggling for a few days on the following error message: C

  05-12 17:35:29.321: E/AndroidRuntime (26531): FATAL error: IntentService [MCGcmIntentService]

  05-12 17:35:29.321: E/AndroidRuntime (26531): process: air.com.mooncat.androidTest, PID: 26531

  05-12 17:35:29.321: E/AndroidRuntime (26531): java.lang.NoClassDefFoundError: doesn't have a resolution of: generator Landroid/support/v4/app/NotificationCompat$;

  05-12 17:35:29.321: E/AndroidRuntime (26531): to com.mooncat.MCGooglePlayServices.MCGcmIntentService.sendNotification (MCGcmIntentService.j ava: 92)

  05-12 17:35:29.321: E/AndroidRuntime (26531): to com.mooncat.MCGooglePlayServices.MCGcmIntentService.onHandleIntent (MCGcmIntentService.jav one: 48)

  05-12 17:35:29.321: E/AndroidRuntime (26531): to android.app.IntentService$ ServiceHandler.handleMessage (IntentService.java:65)

  05-12 17:35:29.321: E/AndroidRuntime (26531): at android.os.Handler.dispatchMessage(Handler.java:102)

  05-12 17:35:29.321: E/AndroidRuntime (26531): at android.os.Looper.loop(Looper.java:145)

  05-12 17:35:29.321: E/AndroidRuntime (26531): at android.os.HandlerThread.run(HandlerThread.java:61)

  05-12 17:35:29.321: E/AndroidRuntime (26531): caused by: java.lang.ClassNotFoundException: did not find class ' android.support.v4.app.NotificationCompat$ Builder " on the path: DexPathList [[zip file ' /data/app/air.com.mooncat.androidTest-1/base.apk"],nativeLibraryDirectories=[/data/app/a ir.com.mooncat.androidTest-1/lib/arm, / vendor/lib, / system/lib ']]

  05-12 17:35:29.321: E/AndroidRuntime (26531): at dalvik.system.BaseDexClassLoader.findClass(BaseDexClassLoader.java:56)

  05-12 17:35:29.321: E/AndroidRuntime (26531): at java.lang.ClassLoader.loadClass(ClassLoader.java:511)

  05-12 17:35:29.321: E/AndroidRuntime (26531): at java.lang.ClassLoader.loadClass(ClassLoader.java:469)

  05-12 17:35:29.321: E/AndroidRuntime (26531):... 6 more

  05-12 17:35:29.321: E/AndroidRuntime (26531): deleted: java.lang.ClassNotFoundException: android.support.v4.app.NotificationCompat$ Builder

  05-12 17:35:29.321: E/AndroidRuntime (26531): at java.lang.Class.classForName (Native Method)

  05-12 17:35:29.321: E/AndroidRuntime (26531): at java.lang.BootClassLoader.findClass(ClassLoader.java:781)

  05-12 17:35:29.321: E/AndroidRuntime (26531): at java.lang.BootClassLoader.loadClass(ClassLoader.java:841)

  05-12 17:35:29.321: E/AndroidRuntime (26531): at java.lang.ClassLoader.loadClass(ClassLoader.java:504)

  05-12 17:35:29.321: E/AndroidRuntime (26531):... 7 more

  05-12 17:35:29.321: E/AndroidRuntime (26531): caused by: java.lang.NoClassDefFoundError: class not found using the charger to start class; no batteries available

  My Native Extension use Google Services play and rely on support android v4. Google services functions perfectly works play (for example: I am able to save the token with the google cloud features).

  I've seen this problem in another thread in github and seems that they solve it, but it does not fit my case. It's like in the publication of flash support android v4 is "removed". I say this because I tried to decompile the generated apk and I discovered that sources exist (like com / / thing, com, google, android, gms /...) BUT not the android/support/v4 /... On the contrary, seems that the apk build contains only the android/support/v7/appcompat/R.java (.java because is decompiled). In the .ane file, I have the Android - support.v4.jar and also the contents of platform.xml to/META-INF/ANE/Android-ARM. In the platform.xml I have this:

  <? XML version = "1.0" encoding = "utf-8"? >

  " < platform xmlns =" http://ns.Adobe.com/air/extension/4.0 ">

  < packagedDependencies >

  < packagedDependency >android-support - v4.jar< / packagedDependency >

  < packagedDependency >google-game - services.jar< / packagedDependency >

  < / packagedDependencies >

  < packagedResources >

  < packagedResource >

  com.Google.Android.GMS < packageName > < / packageName >

  < folder_name > google-game-services-res < / FolderName >

  < / packagedResource >

  < / packagedResources >

  < / platform >

  
  

  In the eclipse project, I tried to register the library of v4 support in all possible ways, such as addiction, external jar, or kept as a defult library in the libs folder. Nothing works...

  
  

  I really can't understand hot to fix this crazy...
  

  I just discover the problem... just crazy!

  It was caused by the version of android.support.v4.jar. I did a test now, for some reason any magic, using one I had before (I got it, in Eclipse, with a right click on the library project, Android tools > add Media Library, it was not recognized). Then, I tried with the other two different versions of android.support.v4.jar, and this solved the problem as if by magic! Just to say, using the method add the support library, the size of the file android.support.v4 was 1.2 MB, the other two versions were respectively 759 KB and 628 kb, according to their version. I expected that this library has been correctly added by eclipse, also relying on the target of androd in the project.properties, but does not appear. Hope this might help someone.

  PS: like all the other thread suggest, don't forget that the android.support.v4.jar is included in your DONKEY file, and the platform.xml explicitly declare it as .

• What is the difference between 'Product recovery Support' and 'recovery media "?

  Both of the above are options in my file of ThinkVantage. I asked Lenovo (Atlanta?) and uh... they did not either.

  .... And the option will give me the opportunity to make a Vista Ultimate clean install less bloatware?

  Thks

  J

  Product recovery media = Recovery CD inclusing OS, drivers and programs (to retrieve the default values)

  Recovery media = CD regular backup your system Safe

  If you are unsure, try them and see what are the components

• With the help of product recovery CD when the hard drive replaced

  Hi all

  It seems that my hard drive is defective, so I bought a replacement, installed in the laptop OK and tried to use the Toshiba product recovery disc. The laptop started with the disc OK and recovery of product starting screen appeared and I started the process. The process starts, but then crashes and no matter how much time wait nothing further happens.

  I put the defective hard drive, back to and started on the recovery disk and it started and the process started OK.

  The recovery disc can not be used on a replacement hard drive? Surely, this is possible, as hard drives do fail and must be replaced.

  Can someone tell me how to fix it please?

  Thanks in advance!

  In General, you can use recovery image after replacing HARD drive. I did the same thing on my machine.
  It was: is the new HARD drive recognized properly? After Exchange of HDD enter BIOS and check this.
  Before you begin the recovery image installation if please try to set the BIOS to the default settings and try reinstalling the recovery image.

• Re: Satellite M60 - error of bad computer at the start of product recovery CD

  I have a portable Satellite M60 which I formatted in 2007. At this time, I used a recovery CD product I bought from Tosiba Australia.
  Now I want to format my HARD drive using the same CD, but this time when I boot on the CD, I get an error of 'Machine' wrongly
  I guess that information on my HARD drive was corrupted which causes the utility to fail.

  Can someone give me some ideas on how to overcome this problem?

  > I have a laptop of Satellite M60 which I formatted in 2007. At this time, I used a recovery CD product I bought the Toshiba Australia.
  Sorry Richard, but one thing is confusing to me. Currently, every Toshiba laptop has been delivered with disk recovery facilities and is in the box with the new model laptop. I don't know where do you live and where you bought your laptop model but I do not understand your laptop is an Australian model for computer laptop and you bought the CD of restoration in the country of purchase.

  Discs of recovery facilities to specific disks created for some models of laptops. Before the facilities specific info on recovery disk is compared with the data saved on the laptop and only if the info corresponds to recovery procedure will continue. This means that you cannot use the recovery of another model of laptop and install it on your Satellite model.
  These data are not saved on the HARD drive and HARD drive is not meaningful for this control of data.

  Usually when the laptop is fixed and swapped the motherboard technician must rewrite the data of good information. Sometimes it will be forgotten and a recovery facility ends with wrong machine error.

  The question is: has your laptop repaired in the past?

• Can I create a task that includes the 2 c series modules?

  I am trying to create a single task that includes 2 modules of the series C OR - 9425, but when I wire the constant "Mod3/port0, Mod4/port0" physical channel in the DAQmx create Virtual Channel.vi I get error-200086 which indicates the syntax range physical channel in the input string is not valid because several devices have been included in the chain.  It is my understanding of LabView help this multidevice tasks are allowed.  Also according to article KB http://digital.ni.com/public.nsf/allkb/CF85114C6025C84C862571C000722DDA devices multiple tasks are supported for devices of the series S, series C and DSA devices, and according to this article KB http://digital.ni.com/public.nsf/websearch/78E44565FD87E7D686257108007F94F8?OpenDocument I formatted my constant of physical channel correctly.

  Please can someone explain why I get this error when all indications are that this should be a simple thing to do?

  My C Series modules are in slots 3 and 4 in a chassis cDAQ-9188, I'm currently under LabView 8.5.1, with Windows XP

  Thank you

  Eric

  Hi Eric,.

  I am afraid that you cannot configure the hardware timing with the module 9425 in CompactDAQ. The NI 9425 data sheet explains: «the NI 9425 is a static digital module, so you can use it to perform only call by the software or static operations when installed in a chassis NI CompactDAQ.»

  For I, AO and countertops, daisy chaining multiple calls to DAQmx create channel equivalent to specifying a list of physical channels, but it's different for DIO. Only one virtual channel DIO can contain several physical channels (lines). It would be quite reasonable to assume that by specifying a list of lines 'with a single channel for all lines"would cause DAQmx put all the lines in a single virtual channel, but see how it is implemented under DAQmx, is not possible when the lines are on multiple devices. Also, it would be reasonable to assume that if DAQmx could not put all the lines in a single virtual channel, it would create a virtual ring road, but that is not how it is implemented-, it returns the error you received.

  Instead, here are two approaches to all 64 lines in a single task. Either we have to work.

  Approach: create a single task, containing two virtual channels (MyChan0 and MyChan1). MyChan0 contains cDAQ1Mod3/port0 / line0:31 and MyChan1 contains cDAQ1Mod4/port0 / line0:31. Digital 2D Bool NChan 1Samp read VI returns a 2 x 32 table of Boolean. To flatten it into an array of 64 elements D 1, you must use the table to reshape or some other method.

  

  The task of DAQmx > ownership of channels is here to show that there are two virtual channels named MyChan0 and MyChan1. Also, I used a loop for to show that you don't have to encode multiple calls to DAQmx Create Channel. The constant "a channel for all lines" is redundant because it is the default value.

  B approach: create a single task, containing 64 virtual channels (MyChan0 through MyChan63). This example uses the constant 'a channel for each line', which is not the default. MyChan0 contains port0/cDAQ1Mod3/$line0, MyChan1 contains cDAQ1Mod3/port0/line1, etc.. Digital 1 d 1Samp Bool NChan read VI returns an array of 64 D 1 of Boolean elements. If you have used the Digital 2D Bool NChan 1Samp VI instead, you would get a 64 x 1 matrix, there are 64 virtual channels with 1 line of each.

  

  Brad

• Question about the use of product recovery

  I need to uninstall everything on my laptop, so I can start over with my product recovery CD. How to uninstall everything?

  Thank you
  Susan

  You do have to uninstall anything. All you need to do is put the delivered to your laptop recovery DVD and start the recovery procedure. To make this DVD player must be set as first boot device. To do this, you have three different ways:
  1. Enter the BIOS settings and you will find this option
  2. when the laptop starts up press F12 and follow the window you can choose DVD
  3. after the passage of press phone C button and keep it down for a few seconds. This will force the DVD player to read the recovery DVDs

  If you have any other questions, please write again.

  Good bye

• Cannot copy file names that include the slashes, commas, etc.

  Hello.

  I am trying to copy files from my old Mac G5 tower (about 10 years).  But my copy fails with an error message when trying to copy a file name that includes a special character.  Is there a way to get around this?

  To clarify: when it runs in a file with special characters, it gives me the error message that the file name is too long or contains special characters.  The problem is that when I click 'OK' to confirm the error (not), the copy is aborted.

  Any ideas?

  Thank you!

  E. -.

  Oh!  Well I guess you will have to wait for someone with a Mac experience for you then help.  I do not have one.  I'm sorry.

  BTW, you should post your question on Apple/Mac forum.  Many experienced people who can help you.   Good luck.  :-)

• Re: Gigaframe Q80/81 - updated firmware, including the Support folder

  Hi all

  Would like to know when Toshiba plans a Firmware update
  include the option to browse files in Gigaframe Q80/81.

  It's a Photo frame, perfect for my needs except the folder navigation
  as it is very irritating is not to have a slide show of the option
  a single folder...

  -Vijay

  Hello

  Who knows?  :|
  Maybe you should ask Toshiba directly about these updates?
  If you want to get some information, please share it with us!

  Greetings mate

• How to make a form that includes the column display the product in the previous column and 50.

  Example of column 1 has the value entered 3, the next column will show 150. The column that shows 150 should also not be editable

  Ok... Use this code in the custom calculation of the total field script, then:

  Event.Value = number (this.getField("of_Empty_Ballot_PadsRow1").value) * 50;

• How to start the external ODD product recovery disc?

  Hello

  I use laptop Equium. My builtin DVD drive is faulty. So I connected an external hard drive and tried to make the recovery of product by pressing F12 at startup and select the CD/DVD option. But the system boots from the CD.

  Please help me, what I supposed to do to perform a recovery of product with my external DVD player?

  Thank you

  Biju

  Hello

  I agree with the user above. You can start from an external hard drive t and if you need to replace the internal.

  By the way: If your laptop is under warranty you can get a new drive for free. If this isn't the case, new readers are not so expensive. Just ask your computer store preferred a good offer! :)

• Someone at - it codes of countries that includes the iPhone/iPad

  I am local, dropped my app - and suddenly the problem on the iPhone and iPad plaforms and Mac-Apple uses slightly different series of ISO standards. Or at least their own interpretations of them.

  rticles/LanguageDesignations.html https://developer.Apple.com/library/Mac/#documentation/MacOSX/conceptual/BPInternational/A

  Now, if I go ahead and use the option strings in CS6 Flash Pro, it has basically the basic example 'fr' and if you want that versions of "en-US" or "en-GB" or "in - to THE"... you must add in the custom field. There are also variants Chinese, detailed in the llink above and probably many others.

  for example;

  zh-Hans

  Chinese in simplified script.

  zh-Hant

  Chinese traditional writing.

  So what would be really handy, is a list of the codes real contry returned by an iPhone4 and 5 - Yes, they are different, apparently and the different models of iPad.

  Does anyone have such a list they generated? where it can be found. I searched apple and the web and variants are thousands...

  Thank you

  In your example "Cannot make it" you spelled "myTxt" while the public static var is "my_txt" so you need fix this.

  If you assign this outside the class, you must specify the class to access the data.

  for example

  package

  {

  public class test

  {

  public static var myStr:String = "Hello World";

  access to the site even in the same class

  trace (SomeClass.myStr);

  }

  }

  assign outside the class (not only instantiate)

  myBtn.label = SomeClass.myStr;

  If you want to set, you must use a setter with the validation inside test:

  public static void SetMyStr(str:String):void

  {

  sent null, do not take into account

  If (! str) {return ;}

  did not send myStr null, together

  SomeClass.myStr = str;

  }

  Used:

  only static members can use other static

  SomeClass.SetMyStr ("another string");

• Windows search returns no results to records that include the privileges of custom security

  Hello

  I have some files in my computer with security permissions only to my user. And I can't find the files in these folders with windows search. What should I do to get these results?

  PS: I can not change the security permissions, as the files would be high risk.

  Thank you.

  You must change the security permissions to allow the read system files.  If your user account is the only one able to read the files, then they cannot be displayed in the search results because your user account is not the construction of the index.

  So since you cannot change the permissions, then you have no other options.  Sorry, you can have search results if you do not want to.