The 2020 Inspiron display problems

Similar Questions

• The satellite M60 display problems

  Hello

  I bought a satellite M60 a month ago, and since then, I've been strugling trying to solve a problem that has to do with the display (ATI 700 X mobility).
  When I play some games (the dawn of war, Unreal tournament...) the computer freezes completely, I actually have to force stop it to restart.
  Another problem, that I have seen is with Mixmeister Pro 6, the video playback is erratic, it is as if the computer is unable to handle any overload.

  I tried the upgrade of drivers, nothing works, then I installed the third party Omega drivers, but once again, nothing to do.

  Since the purchase of the M60, I had to correct problems of Wirless and PCMCIA card through driver updates, but there is nothing that I'm be able to do to resolve this display problem.

  I am quite convinced it's a driver issue, but then again, nothing is certain.

  If anyone can help me please I'm getting desperate.

  Hello

  Well, it's not easy to say why it happens but one of my friends has sometimes even appearance but on another unit. If he plays a high-performance games unity cling.
  In my view, this could be a heating problem. Playing games is hard work for the laptop, because all parts (bars of memory, processor, graphics card, etc.) work with max performance and produce a lot of heat. Most laptops are not developed for this.

  However, you should always use the graphics driver from Toshiba. I found the latest version of 15/07/05. It is a display 8.121.050.322A driver. In addition, you must install latest DirectX. I think that it s a 9.1. Check whether the fixes for these games are available.

  Second, if video playback is erratic, it seems that the OS is fully committed.
  In this case, you should check the processes that run in the background of the operating system.
  In addition, try to defragment the HARD disk

  Good bye

• The program window display problem

  It is not a huge problem, but it happened already - causing dispose me of the install or use program.

  I want to delete NORTON suite came with the pc. I downloaded their own removal, tool and, finally, he decided to NORTON has not been executed and produced his window and screen. Unfortunately, the pane below the edge of the screen and cannot be resized. Toggling with the arrow pointing upwards and pressing enter me have as much of an option that wouldn't work - to go new to the Next.

  I'm sure that there's something to fix this - the pc is connected on the SAMSUNG tv, so the display shrink.

  Please can someone help?

  To finalize this thread, I thought I'd share progress, in the case where someone else suffers from the same catalog of horrors that get rid of NORTON caused me.

  After having sent to HP and blame them for putting an a / v on a new pc with Win 7, rather than to provide a disk, as they did, I reconsidered my problem by uninstalling the remains of Startup and registry of NORTON. I got a bluescreen yesterday: Windows could not explain it, but Event Viewer said NORTON was trying to start. Tips from around the Web says to remove elements of Symantec/NORTON directly from the registry, but it's Aussie an area forbidden, even after saving the Reg. I downloaded autoruns progs - but it is hard to tell what elements must be deselected to Start. NORTON Safe Web Lite needs to stay.

  So, I went back to the NORTON uninstall TOOL. Now, for those of you who connect your pc to a TV, don't forget what I don't have: put an end to the end of the screen where you see. On a pc screen, the availability of the screen is still there, below the horizon [in the old days, we often "lost" a desktop icon that way].  I carried my another pc down to the desktop monitor (it's a grateful flat screen!) and set up, started the NORTON uninstall TOOL and waited. Even if the dialogue pane was too inflexible as ever, the edges of the buttons were simply achievable by pushing the mouse under the horizon.  NORTON all parties. My apologies for what is something so time-consuming, but people are trying to help, and I'm paying something in return.

• PSE10 layer of the Panel Options display problem

  Anyone else has this problem with PSE10?

  Select the Options from the layers panel:
  

  The dialog box should display a kind of images and descriptions for miniature sizes, shouldn't it?
  

  This is Win7 x 64 and happens if yes or no I disabled the SWF files to get rid of those animated help advice down to the right...

  Ken

  You have installed in ESP 10 plugins aftermarket?

  Years the cs3, a nik plugin I had installed on an experimental basis caused the same thing.

  MTSTUNER

• The initial image display problem

  I am a new Adobe product photo and Lightroom so forgive me if this is a noob question.   Also, I did a just try to find a solution before posting, but I may not know the correct nomenclature of Adobe to search for, so that is:

  When I import a library of LR3, which was shot with my Nikon D200, dynamic look thumbs.  As soon as I click a thumb Gets a tinge of greening and seems more muddy.  In addition, as the enlarged image will load on my second screen, for a while, it is great then all of a sudden LR3 applies which I suppose are parameters of the camera for the photo and the greenish and muddyness is back.

  I know my D200 present some problem of unexplained color (even with full reset), but how can I LR3 completely ignore the camera settings and show me this image brighter and more vibrant, I see a moment?

  I shoot Raw + JPG small.

  Thank you

  Sunil

  All the profiles you see listed ARE for the D200.  Lightroom displays only the profiles for any camera took the picture.  If you try to turn on a JPEG profiles, all you will see listed is "incorporated", there is no profile for JPEG images.  The camera settings are applied when the JPEG image is recorded by the camera.  Cameras Nikon seems to have a list of 'standard' profiles for their various digital SLR cameras.  I have worked with images of a number of different models, and the list of profiles is the same for each of them.  D2x profiles are for your camera.  So don't expect to see your model listed.  Which has already been supported.

• Thunderbird seems to be corrupted, with a wide range of problems (e-mail folder does not open it, names of the attachments not displayed,...) CAUSE: McAfee Antivirus

  Problems include:

  • By clicking on an e-mail folder does not open it - open in new tab works
  • Names of the attachments are not displayed. Clinkg on the trombone does not open them. "Open all the ' works
  • Sometimes, if I click on an email in the message (?), disappeafrs message pane, and then as I move the cursor to the bottom of the list, they all disappear

  I have restored my pc (Win 8), performed drive controls, run Malwarebytes and virus checks and found nothing.
  I've uninstalled and reinstalled TB several times without success.

  Stuck!

  • First of all I would like to get rid of McAffe. ALTOGETHER. Personally I don't like, but mostly because that its been the center of TB problems.
  • Then download and use MozBackup to save your settings.
  • Copy %appdata%\thunderbird\profiles somewhere for additional security.
  • Remove the data (% appdata%\thunderbird) and tuberculosis
  • Install of TB (download of support.mozilla.org/en-US/products/thunderbird do not create all the accounts.
  • Mozbackup allows you to import your settings.

• In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  Details please

  What version of Aperture? Is OS X 10.7.5 as you say correct for your OS? You shoot JPEG or RAW? If RAW device? Wharton has changed since this worked?

  LN

• having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen that is 2 and a half inch thick green line appears and goes about a second.

  help someone?

  Thank you

  Howdy Yaser of zoysia,

  It seems that your screen displays some graphical anomalies when you connect to your user name. I would use these troubleshooting steps in the following article on the resolution of screens:

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  From: get help with graphics issues on external displays connected to your Mac.

  Thank you for using communities of Apple Support.

• The viewer or split display problem: I am getting small white boxes (similar to those seen in the browser) superimposed on my photos. Any ideas how to fix?

  The viewer or split display problem: I am getting small white boxes (similar to those seen in the browser) superimposed on my photos. Any ideas how to fix?  There must be a display problem in the software.

  Have you of the 'show Talking Points' enabled in the view menu? Then you can see small white boxes superimposed on the image in the Viewer.

  

  You can enable or disable on / off power with ⌥F talking points.

• Display problems on Portege M100 connected to the port replicator

  After having connected the M100 to a port replicator, I meet the following:

  Sometimes the first couple of seconds, the external screen is used.
  When Windows XP Pro login screen, external monitor off running and only after the opening of the TFT screen, I can go back by pressing Fn - 5.

  Another question:

  A minute later, after starting windows at 1024 x 768, the Exchange System suddenly resolution
  to 1280 x 1024.

  I manually switch back to 1024 each time, but the system uses 1280 after a reboot.

  Do you have any idea how DIFFICULT 1024 and how to maintain external when it is docked?

  Thanks

  Hello

  I put t know 100 percent how this fix several issues, but you should first check if updates will help you.
  For example, to check on the Toshiba page if the new BIOS, driver card graphic and display Service for external monitor.

  How the words on the display for external monitor Service:

  1.) description of the problem:
  The Intel display driver has a characteristic, as one of its characteristics, to store used display to system shutdown before and use the device to display the images when the system starts the next time, as long as the device is.
  However, this specification has attracted a large number of complaints that images were not displayed on an external monitor, but on an LCD, if systems have been used in the following way:
  1. turn off the system with the images displayed on a LCD screen.
  2. with the LCD closed, anchor the machine to a longshoreman who has a connected CRT monitor.
  3. turn on/off the system will display images on the CRT, while the system is starting.
  However, the display driver will switch the display device on the calendar in Windows JOURNAL to the screen and displays the images on the LCD screen, which is the previous display device.
  4. from the screen LCD is closed, the user will never know where the images are displayed.

  2) corrective action: update the BIOS on V1.30 or more and install the TOSHIBA display driver

• Display problems with the Portege R600 and Win 7

  I have a R600 running windows 7, every two minutes, I have a display problem where where the vertical pixels seem to get every centimeter unaligned, so my screen seems to blur digital in bars across it.

  I have an external monitor attached and get the same problem with or without him. I have tired the driver of toshiba and intel driver.

  It seems to go away if I have windows min and max, but sometimes it doesn't. If I run my mouse an affected area, that it seems in trouble and sometimes it's not all screen.

  A refresh solves it.

  Anyone have any ideas?

  > I have an external monitor attached and get the same problem with or without him.
  Maybe I m wrong but in most cases if these symptoms are seen on the two displays (internal & external) then a graphics chip could be affected
  It would be the worst case, because that would mean that the motherboard needs to be replaced

  But just a question; have you noticed that using the previous Windows OS preinstalled by maybe Toshiba (Win XP or Vista), you must install the image of Toshiba again to verify if this display problem is still visible

• Calibrate display problems after you run the screen.

  I have a bad problem after running a screen calibrate a Spyder 3 Pro.  I've done this before and no problem, but this time, something went AWOL.  Now I have serious problems with the screen areas header and the context in which the Dock are black?

  The icon screen titles are also black text and it is impossible to see what emails are present because it is also black.

  My screen is a NEC PA272 and I tried to reset this sequel to the problem of calibration but no joy.

  In system Pref NEC display is no longer recognized it be some generic shown screen and the profile seems to be lost.

  In Safe Mode the dock is not black.

  I ran an OSX Yosemite recovery, but this does not seem to have changed anything.

  Can not think of anything else to try contacting Apple Support cat but it was difficult in these conditions and I fell the cat.

  It's weird since it's only a part of the screen with a problem, and the rest is OK.  I don't have a screen to swap to isolate the problem but everything worked fine before.

  Any ideas would be greatly appreciated, thanks in advance.

  

  

  Excellent assistance from the Apple phone is supported, problem solved.

• I could not hear any sound from my speakers, only used the tool of the window all still no sound, so upgraded to sp2, now having display problem & still can't hear it please help?

  I have xp home edition sp1 happen something with my sound on pc tools in the window couldn't resovle the problem, so updated to sp2, now, I posted problem cannot reset resolution on screen and still no sound, anyone has a solution?

  Hi JeanBolling,

  ·         What tools did you use to solve the problem?

  ·         What happens when you try to change the resolution?

  Method 1: Check if you have followed this guide from Microsoft.

  No sound in Windows

  Method 2: Uninstall the sound card and reinstall to check the issue.

  a. click Start, click Control Paneland then double-click System.

  b. click on the hardware tab.

  c. expand sound, video and game controllers.

  d. right click on the sound card, and then click on Uninstall.

  e. restart the computer. Log on to the manufacturer's Web site and update the latest audio drivers.

  Method 3: For the display problem, you can consult this article.

  Resources for troubleshooting problems in Windows XP

• Problems with the start time/Display Tune (r) / Vista Business

  Dear community of Mic,
  I have two problems that slow down my computer.

  (1) start time:
  After my computer starts, it loads quickly in the logon section. However, after I give my login information
  the HP computer HP monitor goes black for about two minutes, then the desktop.

  (2) display tune (r): after the desktop appears, I get an error box saying that "Display Tune (r) failed to load.

  I removed Display Tune (r) in the list of programs using the uninmstall tool in Control Panel.
  I even deleted display Tuner (r) additional files I found during a search.

  However, the error of Display Tune (r) appears after every start.  Even tried to reload the program, but to no avail.

  Any help would be appreciated gratefully.

  Thanks in advance.

  B.B.

  [Moved from comments]

  Hello

  Thanks for posting the request in the Microsoft community forum!
  It seems that the laptop computer goes to black screen after login section and the 'Display Tune (r) failed to load. To get these fixed issue, try the suggestions.

  You did changes to the computer before the show?

  Follow the suggestions listed among the links:

  Method 1:
  If you have any external device connected to the computer, you can try to unplug the external devices except the keyboard and mouse and check if the problem occurs.

  Method 2:
  Step 1: Try to start in safe mode and check is that the computer goes to black screen.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode then you can perform a clean boot and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 3 above to the Knowledge Base article.

  Method 3:
  If the problem persists, you can update all divers latest including the BIOS on the manufacturer's Web site and check if it helps.

  
   

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Please post if the problem persists, we will be happy to help.

• The dvd on the s-video output display problem

  I think I am doing something stupid, but I can't understand it.  I used my T40p for many years, inclunding using the vga external display monitors and digital projectors player.  For the first time, I wanted to use it to view DVDs on a TV using the s-video output capacity.

  I activated the s-video and connected to the tv without problem.  My office is correctly displayed on the TV.  However, when I use the dvd playback software to show a dvd, the tv does not display the content.  The content of the dvd shows correctly on the computer screen, but not on the TV screen.  If I use the view "full screen", nothing shows up on the TV.  If I show only the dvd in a window, then everything on the desktop is shown properly on tv, except the dvd window is blank.  Yet once, it appears correctly on the computer screen.

  I have tried various software to media, including intervideo WINDVD and Classic Media Player player.  I tried PAL and NTSC discs.  No difference.

  I think I'm missing something obvious.  Any ideas appreciated.

  T40p 2373-G3U, 1600 MHz, 1 GB RAM, WinXPP SP2.

  1400 x 1050 with ATI Mobility Fire GL 9000 LCD display adapter display.

  OK, I solved this problem myself.  The solution is to use a configuration that uses ONLY the external display.  Apparently if you enable the output s-video, but do not turn OFF the LCD screen, the video card only then produces the dvd on the LCD, not s-video content.

  There are two ways to select the s-video output only.  Go to settings-> control panel-> thinkpad configuration.  In the window of thinkpad configuration, at the top left, there are five buttons to activate different display configurations.  One of them is "tv only".  If you click this button, the LCD of the computer stops, and the s-video output became active.  Showing a dvd in this configuration using intervideo WinDVD or other programs video display shows the contents of the dvd to the TV via the s-video output screen.

  The other way is to implement a model of custom view using the Director of 'presentation', which is accessible from the 'thinkpad configuration' window described above.  It is available under the "view" dropdown  I created a custom method called 'dvd' that automatically sets the external screen in 640 X 480 resolution.  This is consistent with my standard TV ntsc resolution and avoids the need to change the display resolution before you activate the s-video output.  I choose this plan using the key FnF7 is quick and easy.

  Hope this is interesting to someone out there.