Problems with the start time/Display Tune (r) / Vista Business

Similar Questions

• Satellite U400 - 10L: problem with the start-up & reboot

  Hello

  Well I don't like much about the touchpad overheating but I have a problem. When I restart this mobo instead of activate after a reboot it stays black without any reaction only lower diods, dvd - rom and the display flashes (can't hear fan or hard drive).

  If I press the power button / stop all the icons of diod (ac, pwr, hdd bat) shine up just for a second and new (can't hear the fan hard drive or cpu) computer does not turn on. All this happened only when AC cable is connected to the power if I use just notebook power source battery boots and restart without problems.

  If I remove battery completely from the laptop, once more, I get the same symptoms (cannot start). And the saddest part of this story is the fact that I got brand new Toshiba U400 10 L to the seller and got a new.
  It has the exact same problem.
  As you all probably understand im crazy because in the last two days, I tried really everything, including the BIOS without flashing and the success.

  Well im not sure whats going on, but this could be the problem with the battery or a bad contact?
  Any ideas?
  I would return it back?

  Thanks much for the reply

  Hello

  The behavior of your laptop is really strange and I suppose it might be bound only to a hardware problem.

  A friend of mine couldn't t start the laptop connected to the AC adapter the power adapter is faulty. It was only possible to start Notepad using the battery, and only if the battery was not completely empty.

  I put t know if your AC adapter failures but the authorized service provider should definitely check out the laptop and accessory for laptop (AC adapter).

  Then call the ASP in your country and ask the technicians for later handling.

  Greetings

• Trying to solve a problem with the list under display properties screensaver!

  When I try to put my screensaver, gout dwon displays a completely blank entry followed by (None) & the list of available screensavers.  Every time I choose (none), it is up to the last installed screen saver.

  An example: the last installed screen saver was ArcSoft Photobook screensaver.
  So, when I select (none) for no screensaver, it is up to the ArcSoft Photobook screensaver.

  This happens each & everytime I have add a new screen saver.
  (None) option always returns to the last screen saver installed.

  There are moments that I need the option screensaver set to (none).

  Any ideas on how to fix this problem would be greatly appreciated.

  Ed

  Not sure as to what I did, however, my problem with the screen saver has been fixed.

  I've been messing around with a number of things that I thought might have caused this problem.  And wala, suddenly the problem existed no more!

• Problem with the start of VMware ESXi 5.0

  I just installed VMware ESXi 5.0 on a new Cisco UCS B200 series blade with two 300 GB hard drives configured in a RAID 1 mirror.  I went through and completed the installation of VMware ESXi 5.0 on this server.  When the installation is complete and the server restarted, he did not initiate the ESXi where I can change the IP address and VLAN.  Instead, I get this text string after the initial boot sequence that is shown in the attachment.  I have a guest who said Shell > do not know why I can not start correctly in ESXi 5.0.  Thank you!  Paul

  Hi Paul,.

  Looks like you boot to the EFI shell. What is the startup policy that you have configured on this server service profile? It should look like the one below.  If there is a problem with the boot order, you should be able to type "EXIT", then enter on the EFI shell to exit the prompt. If your startup is similar to the one below and you still experience this issue, try to downgrade and re - ack the blade.

  Let me know if it helps.

  

• Problems with the resolution of display on Android

  We have a problem with the display on our Google Nexus 7 (2013) resolution and our Multi-Folio App. If we keep an article within our published application Multi-Folio, the article does not use the mode full screen of the tablet. But when I look at the article inside the content viewer, use the full screen of the tablet. For your information: we use the 1280 x 800 resolution and the Tablet has the highest resolution of 1920 x 1200.

  
  

  However, IOS, it works without problem. We use iPad 4 (2048 x 1536) with article 1024 x 720 resolution. Do you have an idea of what we can do? In this post, you will find two screenshots that describe the problem.

  
  

  

  

  For some reason, the content isn't be transposed into the application of multi-folio like that in the v28 content viewer. Have you tried updating your application multi-folio on v28?

• Problem with the creation and display of intelligent insights

  I have a problem with the intelligent preview function. I use Lightroom 6.4 on Windows 10.

  • When I hit the "Original Photo" icon under the histogram in the develop Module, nothing happens: the remans icon exactly the same and no record Preview Smart is created in the catalog folder.
  • When I create a Smart overview in the library Module (library-> Previews-> generate Smart previews), a Preview Smart folder is created in the catalog folder, BUT , in the module development, l ' icon below the histogram says still 'Original Photo': it does not seem to recognize that a smart preview is available.

  Any idea?

  Rob.

  If everything works as you want, so you can leave the open Historgram.

• Problem with the touchpad after upgrade to Windows Vista

  After that I've upgraded to windows vista I had problem with the touchpad, that I'm not?

  Can U help me!

  Maybe when you tell us what model of laptop you have. ;)

• Problems with the current time of the progress bar reading

  First of all, a terminology.

  As Adobe Flash Player is about to play a video, it shows a spinning icon in the center of the video window.  I've seen web pages which call it the beach of rotation ball.  I'll call it simply as the icon of "spinning".

  Adobe Flash Player is playing a video, when we move the cursor over the video window (or moves the cursor when playing the video in full screen), we see a progress at the bottom of the window bar.  To the left of the status bar is a pause button.

  The progress bar has a pointer representing the playing time in the video.  The progress bar also has a display of the playing time and duration of the video (for example, 40:37 / 01:12:35, which means that read is 40 minutes and 37 seconds in a video that lasts 72 minutes and 35 seconds).

  On my Windows XP system, when Flash Player V10.0.32.18 is playing a streaming video, the video pauses when the bandwidth is temporarily insufficient to provide the video bit stream.  Rotation icon appears in the center of the video window.  Currently reading on the progress bar stops too, as it should.  But when the video continues, the playback time does not begin incrementing again.  He remains at a standstill at the time of the break, which is irritating, because it is no longer possible to say how long he remains in the video.

  It took me a long time to discover that once the current play time has stalled, pressing the pause button will cause the current play time refresh to the correct playing time and begin to increase again.  Yaaayyyyyy!

  Now, maybe someone can help me with a challenge that I have been unable to solve.

  Occasionally, I want to save a few seconds in a video.  But if I use my mouse to get the pointer in the progress bar and move it to the back, move the pointer a few seconds is a huge challenge.  Even a slight movement of my mouse moves the pointer back a minute or two.

  Is it possible to move the pointer using a key (for example, an arrow key) so that each press of button moves the pointer to return only one or two seconds?

  And how about being able to key in an hour and press on enter, what causes the pointer move on time? Any way to do it?

  Hi, OSW, you say that you are using XP, SP1, 2 or 3? What version of IE are you using with XP? You are speaking of two different computers or just XP? You use a different browser?

  The Flash Player version is very old, who would be part of your problem as most of the sites have updated to the latest,

  who is 10.0.45.2.

  In my opinion, it is the cause of everything you encounter.

  After return of the news and we'll go from there.

  Thank you

  eidnolb

• I have a problem with the start

  I have problem with start

  Hello! TNX for your reply, after having turned on its says press the ESC key for startup menu. After that: not found boot device
  Please install an operating system on your hard drive. Hard drive (3f0)
  F2. The System Diagnostics

• Problem with the extended help display option for multiple displays.

  I have a laptop with an internal (#1) designated as my screen main screen. At work, I like to use the 'extended display' option for several screens to use the external desktop as #2 display monitor. However, at home I have the screen internal one on my laptop. So when I open an application like Excel at home, the window does not appear, but the application is running, as I confirmed with the Task Manager. So far, the only way I know to solve this problem at home is to change my display settings for multiple views to show on display #1 only. Is there a practical way to deal with this issue in addition to change the display settings whenever I move from work to home and vice versa?

  Hello

  In Windows 7, you can simply press the Windows Logo + P key.

  In the menu, select the item from the computer only .

  Concerning

• Problem with the dialog box displayed when the RadioButton is selected.

  It is an application with 3 buttons button1, radio 2 and output key that uses System.exit (0)
  The problem is with the dialogs first two buttons

  1. I open the application

  2 Select a radiobutton, I get a dialog box, I click 'ok', dialog will, that's fine.

  3. I choose an another radiobutton button1 or button2, I get the corresponding dialog, BUT know I have to click 'ok' twice to keep it alive.

  I don't know what could be the problem, here is the code:

  package com.thinkingblackberry;
  import net.rim.device.api.system.Display;
  import net.rim.device.api.ui.Color;
  import net.rim.device.api.ui.DrawStyle;
  import net.rim.device.api.ui.Field;
  import net.rim.device.api.ui.FieldChangeListener;
  import net.rim.device.api.ui.Graphics;
  import net.rim.device.api.ui.component.ButtonField;
  import net.rim.device.api.ui.component.Dialog;
  import net.rim.device.api.ui.component.LabelField;
  import net.rim.device.api.ui.component.PasswordEditField;
  import net.rim.device.api.ui.component.RadioButtonField;
  import net.rim.device.api.ui.component.RadioButtonGroup;
  import net.rim.device.api.ui.component.RichTextField;
  import net.rim.device.api.ui.component.Status;
  import net.rim.device.api.ui.container.MainScreen;
  import net.rim.device.api.ui.container.VerticalFieldManager;
  import net.rim.device.api.ui.component.PasswordEditField;
  
  public class HelloWorldScreen1 extends MainScreen implements FieldChangeListener, DrawStyle {
  
      protected static final int RED = 0;
      MButtons fullscreen;
      //protected RadioButtonGroup rbGroup= new RadioButtonGroup();
      public HelloWorldScreen1() {
  
          final RadioButtonGroup rbGroup=new RadioButtonGroup();
  
          setTitle("Application");
  
          RadioButtonField rbField= new RadioButtonField("RadioB1"){
  
              protected void paint(Graphics g){
                  g.setColor(Color.ROSYBROWN);
                  super.paint(g);
              }
          };
          RadioButtonField rbField2= new RadioButtonField("RadioB2"){
              protected void paint(Graphics g){
                  g.setColor(Color.SIENNA);
                  super.paint(g);
              }
          };
          RadioButtonField rbExit=new RadioButtonField("Exit"){
              protected void paint(Graphics g){
                  g.setColor(Color.DARKSLATEBLUE);
                  super.paint(g);
              }
          };;
          rbGroup.add(rbField);
          rbGroup.add(rbField2);
          rbGroup.add(rbExit);
          add(rbField);
          add(rbField2);
          add(rbExit);
  
          rbGroup.setChangeListener(new FieldChangeListener() {
              public void fieldChanged(Field field, int context) {
              if (rbGroup.getSelectedIndex() == 0) {
                  Dialog.inform( ""+rbGroup.getSelectedIndex());
  
              }
              else if (rbGroup.getSelectedIndex() == 1) {
                  Dialog.inform( ""+rbGroup.getSelectedIndex());
              }
              else if(rbGroup.getSelectedIndex()==2){
  
                  System.exit(0);
              }
  
              }
          });
  
      }
  
      public HelloWorldScreen1(long arg0) {
          super(arg0);
      }
  
      public void fieldChanged(Field field, int context) {
  
      }
  
  }
  

  I guess the event changed field is called twice, once deselection button1 and once to select button2. you pay your processing logic to account for this.

• Problem with the start menu of windows 8.

  So my type of computer is Windows PC. My windows 8 Start menu automatically brings me too my "Apps". Then I have to click an arrow button and it brings me to 'start '. I can't find a way to 'lock or PIN' from the menu 'Start '. So, whenever I push the menu button start it brings back me to the "Apps". Is there a way to solve this problem, so that the start menu button will lead me to 'start '?

  Hi Sarah,.

  Please contact Microsoft Community.

  I understand the inconvenience that this may cause. I'll be happy to help you with that.

  I suggest you to put the computer in a clean boot state and check if it helps.

  Refer to this article how to perform a clean boot in Windows.

  http://support.Microsoft.com/kb/929135

  Note: refer to the section how to reset the computer to start normally after a boot minimum troubleshooting.

  Keep us informed of the status of the issue.

• A problem with the composite video display mode

  Hello!

  Since this morning, the composite video display mode of my sequences is black with a blue stripes dotted line.

  Each sequence is displayed with the same problem.

  Can you help me please?

  Lily.
  

  Hi Lily,

  Go to the file/project settings/general and change the rendering on "Mercury Playback Engine software only" engine.

  Press OK, you will get a dialog box in which you must select 'Remove Previews'.

  Try these steps and see if it works.

  Kind regards

  Navdeep Pandey

• Qosmio G40-108: problem with the highest starange display resolution

  I just had mine but on its highest resolution all Web pages have these 11 blocks rectangular semi, barely visible, only the bottom, each about an inch long, is this normal and should I send it to the object of an investigation?

  Hello

  It is very nice to hear that you already have the new Qosmio notebook. I can't say much about your problem because without a screenshot, it is not easy to understand what you mean exactly. On my Qosmio G30 (with the same HD resolution) I have no problem at all. Because of this I can't really understand what the problem is here.

  If possible send a link where we can see what it looks like. Your description is not enough.
  BTW: have you noticed that on web pages only?

• Problems with the start of the vi using TCP on a cRIO, error code 63

  I'm trying to deploy the 'multiple connections - Server.vi' in examples of TCP & UDP to a cRIO as the startup application. The vi works fine and I can connect with many clients until I have deploy the vi and set it as vi on a cRIO device startup. When the device restarts and I try to connect with the 'multiple Client connections 1(vi)"also found in examples of TCP & UDP, I get"error 63 occurred to TCP connection open. Are there additional parameters that need to be enable to allow TCP as the boot vi?

  I don't know that is the question and I don't have an RT target available to test it, but here's a possibility: property nodes sometimes do not work as expected when you run on a RT system without front panel.  In the case of multiple connections - server example, the first thing that happens is that the VI wrote a false value in the property node.  As explained in the link, this has no effect.  For example, if the default value of the control 'Look stopped' is 'True' the top loop will close after the first run, which will stop the VI, probably leading to the error that you see when you try to connect.

  To resolve this problem, I recommend you remove the 'Missed listening' control completely and change conditions to stop for the two while loops.  You run a compiled application on RT, so unless you will connect using a remote panel, there is no need any façade including the stop button control.

  EDIT: if I have correctly identified your problem, you can vote for this idea: "Warn on the face property node to use when you build a RT".