The Activation of Windows 8 failed after BIOS update

Similar Questions

• Satellite Pro A300 - touchpad failed after BIOS update

  After that good BIOS update 2.00 to 2.10 / suggest by ALERT TEMPRO - http://support1.toshiba-tro.de/tedd-files2/0/bios-20091125132031.zip/ the touchpad of my Satellite Pro A300 - GR 1 stopped working.
  He appears under the name hidden in Device Manager. The State of the device - "this device is not present, is not working properly or is not all its drivers installed." (Code 24) "reinstall the driver has no effect of course. I can also access the BIOS utility when you start pressing F2.
  Running Vista Business 32-bit Edition.
  Ideas to solve the problem will be highly appreciated!

  Hello

  Normally, it should be possible access the BIOS, if you press F2, once you have turned on the laptop. Please check again and load the default settings there.
  And you cannot access the BIOS if you shut down the computer.

  You can use an external mouse on the laptop? Please check this too.

  I've also updated the BIOS on my Satellite A300 but I n t have a problem with the touchpad after the update.

• Z510 "Default Boot Device missing or initialization failed" after BIOS update

  Hello

  I get the error in the title, after that I tried flashing the BIOS for the Z510 was last updated.

  I can press ok and then enter in the Boot Manager, but I can't choose anything here.

  also, I can't boot from a disc with for example XP on it.

  I also tried the mode from crysis (fn + r) Insyde BIOS with BIOS file on my USB key

  but it does not work and tries to access the file on the USB key but starts normally rather

  the error again. (could not try with battery removed I have to remove the entire back to remove the battery on)

  the Z510).

  Help would be appreciated

  I found a solution to my problem.

  -> My pc with only back venus installed

  ->, I installed win 8.1 on my ssd (installed by me in the DVD slot)

  -> I forgot to activate the mode UEFI BIOS before installing win 8.1 (executed in legacy mode)

  --> the problem with the firmware update is that it resets the default bios options (here UEFI is defined)

  and then it does not find the partition no UEFI.

  --> solution: I created a recoverydisk of win8.1 on my other pc on a USB and put in and could select

  in the Boot Manager! there I was able to get into the bios again and set BIOS mode back to legacy mode

• T450 - Windows Startup hangs after BIOS update

  After updating my BIOS T450 1.24 to 1.25, the Windows splash screen hangs. I tried all variants of the Secure Boot options in the BIOS, set the default BIOS, tried to decline to 1.24 (1.25 prevents now downgraded to the previous version of the BIOS). Someone at - it see it or now how to fix it? I am close to appellant assistance. Thanks in advance.

  
  

• Tecra A3 - keyboard failed after BIOS update

  I updated the BIOS on my Tecra A3 with the package of 2, 30-VICTORY, and the keyboard has failed... Only a few touches of clam work and they do not even give the good sign... I guess that there must be a language problem or something?

  In any case... I can't go in the BIOS or my bootmenu because even the F2 and F12 keys does not work... The touchpad works very well though, if I Explorer win xp etc...

  How can I fix it?

  Hello

  did you buy this PC in europe or elsewhere in Asia (, USA)?
  If you provide your serial number, we can check if the machine is a European model. If it is not then maybe you have bad BIOS installed.
  If the machine still works as you describe, then it should be possible to download the correct BIOS (if it was the wrong) and install it. It requires only the basic operation of mouse.

  BR

  Tom

• Some problems with the LAN on Satellite L10 card after BIOS update

  Hello

  I have a problem with my satellite L10. Map does not work after the installation of the new network of edge of Bios (2.80).
  I tried it on Linux, BSD and WinXp. OS see my net card.
  I can even install parameters and ping 127.0.0.1 and my ip.

  But all the other pool spoke to me query time-out.

  Help me please.

  Hello

  What to say I put t think that this could be linked to the BIOS. First of all, as you said that the LAN card is recognized correctly in the device if Manager she s works well!

  However, you could try to access the BIOS and could set the BIOS default settings. Don t forget to save changes to BIOS ;)

  In addition, it would be advisable to reinstall the NIC driver. The Toshiba driver page provides the Realtek LAN driver v5.618.1015.2004.

  Good luck

• After you install the updates, programs disappeared from the start menu, internet connection fails after leaving "sleep" mode and the system restore disappeared.

  Original title: most of the programs have disappeared from the start menu.

  Family Vista using premium, updates of Windows installed 10/8 then found that most of the programs has disappeared from the start, internet menu connection fails after that out 'sleep' mode and restore Sytstem disappeared.

  Help please

  Hello

  Please see below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/programs-missing-from-start-menu-in-Windows-7/507709ad-EDBB-46e7-AF44-11a64d36b854

  Also, please create a new user profile and see if the problem is there again. If this is not the case, see the following:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• recently bought a new computer - which came with the demo of Windows 7 installed after my old XP.

  recently bought a new computer - which came with the demo of Windows 7 installed after my old XP. Had a conflict, and then bought a House of windows 7. My old computer has my granddaughter with Xp disc. Trying to remove XP tells me that I am not the administrator? Ms. send me XP dates which I can't install. How can I fix it? My granddaughter lives in 600 kilometres away so not an easy task from reclain the XP disc?

  Colin,
  If you are still issues here is a link on the installation of Windows 7.  It gives information on how to install Windows 7 with the removal of previous versions of Windows.

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After the installation of Windows 7 repair I 219 updates. Best way to install? Small batches... oldest first? Others?

  After the installation of Windows 7 repair I 219 updates. Best way to install? Small batches... oldest first? Others?

  In the previous 18 months there have been many updates toxic that caused problems... these fixes are well eliminated or fixed retroactively or this process will be as walk minefield?

  I currently intend to install some office and .net updates separately and to wait on the optional updates updates security priority are installed.

  Thanks for any idea.

  Properly installed all updates of security except IE11 upgrade [has a full update of IE8 that should cover most security problems... [Since I use Firefox... or whatever it is, but it is to say... no biggie].

  I installed the updates [ie8, etc] 1 security and updates in batches of 20-30 for most recent first then older then. Then I installed the office updates and then a point net 3.51.research showed several versions of dot net needed.

  After each batch, I did a restore pt.

  Note: this repair facility corrected a connection problem that prevented programs and 32-bit browsers... including malwarebytes to connect to the net. I had followed the many expert suggestions to fix this problem without success before the repair facility.

• IP address on the virtual machine windows endangered endangered after the importation of the data store.

  I'm gaving a problem with the IP on windows vm disappear after having mounted the snapshot to restore. Here's what I do.

  Mount making LUNS to the esx host area

  I have eyebrows outside the data store to find the vm I want to right click and click Import the vmx file.

  Imports of the virtual machine and when I start it up I wonder if I've moved or copied the VM. I have tried both moved and copy but when I connect to the virtual machine is missing all its IP info.

  Any way to avoid the losting vm sound IP info when I import to the host from a LUN outlet?

  Hello

  Installs on the forum of the Virtual Machine and the guest operating system.

  The MAC of a virtual computer is based on the UUID/name of the virtual machine so if you are not using a static MAC (one that recognizes VMware) and it will change the IP address might also change if you are using DHCP. So I suggest to use a static MAC in the VM configuration.

  Another way is to set up the guest operating system in the virtual machine with a static IP address instead of a DHCP function.

  But if you are unable to remove the virtual machine or the copy in the virtual machine, there may be something locking these files would be an another running virtual machine. If you need to find this VM and kill him. In this case, "vmware-cmd - L" and 'vmware-cmd - l' host in question can be useful to find where the 'hidden' VM is running.  Ultimately you can use ' vm-support - x "to find a list of the virtual machines running by how the hypervisor lists. Then use 'vm-support - Z' to suspend the offending virtual machine that should unlock everything.

  Yes, the use of these commands is command line.

  However, before using these commands determine if you can find the place where life VM incriminated.

  Best regards

  Edward L. Haletky

  Host communities, VMware vExpert,

  Author: VMware vSphere and Virtual Infrastructure Security,VMware ESX and ESXi in the 2nd business edition

  Podcast: the Podcast for security virtualization of resources: the virtual virtualization library

• Satellite Pro P200-15W: after Bios Update 1.90 incredibly noisy fan

  Hi, I have a Toshiba Satellite Pro P200-15W, I recently made an update to BIOS version 1.9 and seems to have been a big mistake.
  After restarting the computer, I had a lot of software deconfig and the fan has become incredibly noisy.

  I have the problem with the Toshiba Vista registration software, I get this message: "registration of Vista has stopped working". I read other discussions, I don't want to just disable it in the start.ini file, I would actually solve the problem if there is a way.

  Is there a way to change the configuration of fans? I read a post from Toshiba on another model of laptop that has had the same problem of noisy fans after an update of the BIOS, they gave that a solution with a new version of the BIOS, is there a way to reverse the BIOS to the previous version? (recovery CD will be useful for this purpose)?

  See you soon

  Edgard

  Hello

  It seems that the picture of the fan was changed and renewed in the new version of BIOS, and so fans run fall.
  Why the table fan has been changed?

  Well, usually something like this is necessary to improve the reduction of the internal temperature while the CPU and GPU are running with maximum performance.
  This helps to prevent the equipment from damage!

  Usually, the recovery CD formats the whole HARD drive (partitions too) and installs only the image of Toshiba on the notebooks of HARD drive.
  The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
  But you can try to recover the laptop to see if you can solve the problems of software as "Vista record"!

  If you want to reverse the BIOS, you will need to contact the ASP in your country!

  Sorry, but all I can suggest.

  Best regards

• "Boot device not found" Message After BIOS Update

  Today I was invited by the HP Support Assistant software that a BIOS update was available, so I got the application download and install the update. When the computer is back to the top, it says the boot device is not found.

  Ugh.

  Can someone help me with this?

  I have a HP ENVY TouchSmart m7-j010dx Notebook PC running Windows 8.1. Laptop was working fine before the update, which means that I probably would not have allowed the update of the BIOS.

  I found the problem (for me, anyway).

  1) go into the BIOS (F10 from your black screen) configuration settings.

  (2) fix the "Legacy Boot Options" and save your changes.

  As soon as I did it, it starts immediately in Windows.

• Is my computer better after BIOS update?

  Dear Sir.
  I have the idea that my tecra M2 works better after upgrading the bios (from 1.3---> 1.5): sometimes I had the problem that wifi has not begun well, the fan was too often running: after the upgrade of these things worked much better!
  Some people have the same experience?
  Thanks in advance
  Dr. weekx reg

  Hi Reg,

  It is quite possible that you will see some 'differences' in the behavior patterns of your laptop after BIOS upgrade to a later version. Each new version of a BIOS can contain corrections or adjustments to the previous ones and values parameters and can even contain new features. Unfortunately, the new version of the BIOS can also contain changes that may negatively affect the system or make it less compatible with the old facilities and devices.

  I generally adopts the principle that the BIOS should be updated if a specific problem is currently experienced in the hope that the latest version of the BIOS can be beneficial.

  I am pleased that your update has worked well for you on this occasion.

  Best wishes

• Satellite L450D - 13 X - blue screen after BIOS update

  I have the blue screen after BIOS update. Satellite L450D - 13 X worked ok before that ideas?

  Is there contact information for Support TOSHIBA?

  Hey,.

  > Is there any TOSHIBA support contact information?
  No, becaue, must contact an authorized service provider. Guys can help on any hardware and software problems and can also order spare parts from Toshiba.

  Here is a list of aspic, where you can look closer:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

  Good luck! :)
  ?