The Adobe photoshop on my Canon pixma pro 100 menu wrinkles printer menu

Similar Questions

• Help the printing of the Canon Pixma Pro 100 size problem.

  Hi all! Quick question - can I print on a map of 3 x 4 with rear feeder of the Canon Pixma Pro 100? The guide used even close than smaller ones. Well, there must be a way... right? Thanks for any help!

  Display multiple and trim.

• Canon Pixma Pro - 100 prints very dark

  I see that it is a recuring with the Canon Pixma Pro-100 problem, but nothing, I found an online help I ask and hope someone can solve this problem for me.

  Just picked up a Pixma Pro-100 today and installed on my iMac 27 "(Yosemite) 2011 with the latest drivers downloaded from Canon to be sure to have the website." I also checked the printer firmware but it's later to 1,100. Weather, I'm printing through Lightroom or Photoshop; by Canon Print Studio Pro, my garden image, or by LR / PS directly; with - or without PS as a manager of color; the prints is proving to be much to dark.

  I have to set an exposure of 2/3 in LR to be anywhere nearby to get the same result as on the screen. I am also careful to select the right ICC for correct paper profiles. My monitor is calibrated with a Spyder4pro and I also re-calibrated her during this process to see if that helped.

  Well. Long story short; the prints are dark. So I borrowed 2013 Spyder4pro MacBook Pro (Yosemite my wife) and installed the latest drivers from Canon. Once again; on this machine, the impressions are also to dark with about + 2/3 in order to correct the impression of something that looks like the monitor. The two screens can also be programmed to 30% brightness.

  I also have access to an Epson Stylus Photo R3000 and the prints of that much brighter spell.

  Unfortunately, I see that many others also have the same problem. Then; Here's the question. How can I fix it? Do I have to return the printer and get a refund? Because it's clearly not good enough.

  Thank you very much for your answers. But unfortunately, I have "been there, done that" on all of your advice.

  I go back on Monday to the printer and replace it with an equal Epson printer as I have only good experiences with this brand and the prints I get without using overtime to tinker with settings.

  It was my first (and last) Canon printer.

• PIXMA Pro-100, very dark print

  Hi all

  I just bought my Pro-100 and installed yesterday evening. I upgraded to an HP that was strictly CMYK (only 4 ink). I installed according to the instructions, but my impressions seem to come out substantially darker than they should be. Lime green print darker green. The bright blue print a darker blue. The bright red print a very dark red. Roses are dark pink print. The tones are much, much darker than they should be.

  I print Adobe programs (Illustrator, Photoshop, and Pro - CS6 all). Am I missing a setting somewhere? On my previous printer, I would choose "primary preserve CMYK" and it printed perfectly. Now, I can't seem to get my impressions a normal colour. I'm not attempt "to match my monitor", just trying to get the colors closer to their true colors. I have CMYK primaries preserve not controlled and checked that the printer determine colors, but none of these options seem to be able to help.

  I called Canon support, but they were unable to help me. He had put me my settings all default return and test printing. When this does not work, he said "good printers vary by brand so theres really nothing we can do about it." I can't imagine that this big of a printer prints it off on the colours.

  Any help is greatly appreciated!

  "... There's nothing we can do about it." »

  Well, of course it is not true.  I have three of these printers in this line.  The 9000, 9500 II amd Pro-100.

  They are all printed differently, but after a bit of tinkering with settings, they all did very well.  They are great printers.

  First of all you do not leave the printer defined anything.  Cut each little out of control there.  You can do it with the Canon My Printer the printer settings tab.  Do you know how?  I think, Yes, for the moment, but if you don't come back to me.

  Secondly, you must have PS manage all settings and corresponding color.  You know how to do this?

  And finally, it is essential that you get some settings on your monitor which corresponds somewhat to the prints.  Your printer can do exactly what you say to do, and not sure that it is.  Because your monitor is turned off.  If you don't do this step, you can forget the other steps.  However, there are only a few things that must be addressed.  You don't need for any fancy additional modules to do this.

  But you must get very narrow gray-scale.  You must get very close brightness and you must close contrast.

  Once you do these things, you can make adjustments to your impressions by looking at just your screen.  Because you know that the monitor and printer are on the same level.  Another point, you cannot get a printer to print all colors exactly as you saw.  It is not possible because all the colors and adjustment in effect all the others.  My goal is to get the right tones.  That's what people notice.

  For example, I know that my most recent Pro - 100 tends to print darker than what I see on the screen.  So I automatically know to set it's prints a stop brighter in PS.  It also prints with a warn a little tone.  Most of the time, with in particular, protraits cela if OK, but sometimes it is not.  In this case I set the 'temp' slightly cooler setting in PS.

  Make sure that you have the correct ICC profile and that you use brand ink Canon and paper until you get well with the printer.  Very, very important!

• Printing from Photoshop CS6 to new Canon Pixma Pro-100 shrunken output?

  When you print 8.5 x 11 "Photoshop cs6 (any size) on the new Canon Pixma Pro100, it prints about 25 percent of the correct size.  Starting up page & vprinter settings checked, together correctly this is a file I printed often previous printer (canon pro 9000) without problem. I deleted and added the new printer to queue in the preferences. I'm confused as to what could cause this problem. Adobe compatibility? or the new pro 100 Canon printer driver? any advice?  Should I remove folder utiliities Canon. (I had a hellish time, installation of the printer software, gave up to get wireless to work, so its usb plugged). But why some files psd print properly, often the first attempts to print are narrowed, but then get corrected, but some I can't get the file to print anything, but this small size! maddening! very grateful for any advice. I'm on deadline! (Photoshop cs6, Yosemite)

  

  Hello

  Files that you are not able to print correctly.

  Try this out.

  • Press and hold the SPACEBAR button before you click on file > print

  And then try to print and verify that you get the same result.

  Thank you

• New printing Canon Pixma Pro-100 with streaks on circles

  Hello.  I just bought the printer last week.  I'm running on a MacBook Air.  In general, I use LightRoom and Photoshop.

  I am a professional photographer and recently to watch a class PKI and learned how to print it.  I was shocked by what it's beautiful prints were.  It was using an Epson in a classroom.

  I did my research and talked to other photographers and decided the Pro-100 would be perfect for me, and so far, it is.

  I had trouble with magenta casts when using LightRoom.  Spent in PhotoShop and got better results.  But some prints, especially those with a background of simple and clear, pale lines appear across the page.

  Here is an example.  The lines appear up and down every inch of 1/4 or more:

  Call to the 1-866-261-9362 Canon, from Monday to Friday 10:00 - 22:00 AND (excluding holidays).

• Cannot print 13 X 19 on Canon Pixma Pro 100 - 10.9.5 - Photoshop CS6

  MAC OS X: 10.9.5 (Mavericks)

  Photoshop CS6 Extended

  Hello

  Lost about two hours trying to figure how to print 13 X 19 from Photoshop CS6. After noticing that the option A3 + not appearing is not on cheking the prinnt options, I've read that I should use the Print Studio Pro plugin. When I try to use the plugin pro printing studio I get this error:

  "a printer supported by this software is not found. Connect the printer supported by this software, and then install its driver. Pro printing Studio output. »

  Ridicule of Wat is I use the printer and it works for all kinds of impressions, so it IS installed. What am I supposed to do? I have a huge batch of paper 13 X 19 Canon semi-Gloss Photo that I can't use.

  to my knowledge, I have all the drivers installed. Any help would be grateful. Thank you in advance.

  -GIo

  Two suggestions:

  Download and install the latest version of Print Studio Pro.

  If you use the WiFi printer make sure that you have added the IJ network printer and not the printer Hello.

• A DVD of printing on Canon Pixma Pro-100

  I try to print an image on a DVD using the above referenced printer. Lightroom and Photoshop Elements keep send me error messages that the inner cover is open. Of course, it is open: you must insert the drawer of the DVD to print! I also tried Canon Easy-PhotoPrint EX and my garden of Image. Both apps work fine and don't trigger the printer error message except that the image is larger that the DVD any image of the size that I use. My latest attempt involves a picture that was 2.5 x 1.75 "according to the standard 12cm (4.72") DVD, but the printed image much larger than the DVD.
  Any suggestions would be greatly appreciated.

  Hi Ken_k,

  It is recommended that you contact the direct technical assistance. There is NO charge for this call. Information in real-time to a technical assistance call live would be very beneficial in this case.

  Please call 1-866-261-9362, Monday - Friday 10:00-10: 00 ET (excluding holidays). A Canon technical support representative will be able to solve this problem more quickly.

• Canon Pixma Pro - 100 Firmware Update

  I intend to update the firmware. According to instructions - confirm that the sleep mode is disabled on the computer. How can I turn off? I can't find "sleep" mode in the printer utilities. There is a setting on automatic option, which is disabled - is that the sleep mode? Thank you.

  Mode 'sleep' they're talking about is computer "sleep" mode, sleep mode, not camera. What kind of computer?

• With the help of Pixma Pro 100, can I print twice a sheet of gloss Pro?

  I have a few prints at the beginning where I wrong image size and ended up with a lot of extra white left above. Can I run through new and print on unprinted areas?

  "Can I run through again and print on unprinted areas?"

  Yes, you can I do it all the time.  But ONLY after the print is completely dry. I mean DRY!  It takes several hours.  If you get ink all over the printer and paper path rollers, you will not be a happy person.

• The blue print Pixma Pro 100 purple Canon. Help

  I just bought a Canon Pixma Pro 100 and I have problems with the color matching, specifically, fate blue violet.  I have a spyder express and have corrected my monitor color.  I had a problem earlier with this yellow, but I have very close with Print Studio Pro Player with lightroom.  Here are my settings and the specific screenshot. If anyone can help, that would be appreciated. Thank you

  You have run a nozzle check?

• I bought the Adobe Photoshop CS5 and Lightroom 3 on a CD. However, I now have a 3 Surface Pro who does not have a CD player. Please give me a way for software downloaded from the internet. Thank you.

  I bought the Adobe Photoshop CS5 and Lightroom 3 on a CD. However, I now have a 3 Surface Pro who does not have a CD player. Please give me a way for software downloaded from the internet. Thank you.

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  IF Windows 10 read below

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  - so if you have an older program, update you to Windows 10 at YOUR risk of problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -IF not, Details of the message from the error messages and a person may be able to help (just not Adobe)

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign permissions... said FULL yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• Their impression of Lightroom 4 for Canon Pixma Pro 9000 MK II

  I tried to print from Lightroom to a Canon Pixma Pro 9000 MK II 4.   Every time I try to print via try it before (to the canvas), I get an error message (code 1281) and I can't print.   I tried a few different papers as canvas and give them the same error code.

  I also tried printing from Elements 9 with the same problem.

  I can print via try it before using the own Canon, Easy Print Pro software, but I can't soft proof of the image first, and can't do the correct image size or the other.

  Anyone have an idea how I can get around this problem?

  I spoke to Canon, and they passed the ball saying that I can print using their software, it is a question of Adobe.

  Printer: Canon Pixma Pro 9000 MKII

  Software: Adobe Lightroom 4

  Operating system: OSX Lion

  Thanks for your help.

  Finally managed to get my image printed on canvas.

• Paper size of the PIXMA Pro - 100 substitute

  Hello

  I love the Pixma Pro-100 on most levels compared to my previous R2400!  Ink consumption, image quality, etc. all are better.  The only exceptionis I could print a banner 44 "on the Epson.  Is it possible to configure or replace the maximum print size 13 x 19?

  Thank you!

  KP

  Like other Canon printers, the PRO-100 to set custom paper sizes.

  Paper width: 12.95 "- after a few tries, I found that a custom size the value 13" causes a printing error. With the help of 12.95 "corrected it. You will notice on the scale of width 16.54. This is an error in the software programming.

  I found that the effective maximum print length is 26 ".  Then 12.95 x 26 inches.  No. 44 inches!

• Printing from Lightroom 5.2 on Canon Pixma Pro-1

  Hello

  I am new to Lightroom 5 and Canon Pro-1. I'm not sure that I fully understand what is happening when I use ICC profiles for printing (in spite of paying through forum after forum). When I print the results look, nothing like the results on the screen. I tried the soft test and proof image looks like my output, but I'm not understand how I'm supposed to use the ICC profile.

  System

  Windows 7

  5.2 Lightroom

  Canon Pixma Pro-1

  8 GB RAM

  1. use of proofing it appears that I need to adjust my image for each paper type. It is not meant for me - I thought that the profile would be to adjust printing so that I wouldn't have to adjust the image.

  2. when I print, I put the following settings of the printer:

  

  3. when using unsupported paper, what types of paper should I choose? Is there a resource anywhere that tells me?

  

  4. should I have my correct print settings Lightroom base?

  

  Is could someone please tell me what I understood/hard to please? I know it's a forum for beginners but still, please, excuse for the total lack of understanding.

  Help is greatly appreciated.

  Thank you

  Mike

  I use the Pro-100 for a few months.  It's a great printer that I am very satisfied.  Currently there is a very aggressive rebate program if someone wants a new printer.  FWIW, I have been unable to find anyone, anywhere not happy with Canon Pro printers.  Basically, you can get a value of $170 of paper and ink for $99 with a printer that is 'free' to the end of the year.

  Return to this topic!

  There are potentially three completely different workflows between Lightroom and Canon Pro-life 1, 10, 100 series that involve choices of papers, ICC profiles and color management.

  1. printing with Lightroom controlling color.  You must open the printer driver and disable the printer color management.  By selecting the document in the pilot seems to define the profile.

  2. print with the printer manage the colors.  In LR, he must choose color management > managed by the printer.  Then turn on color management in the printer via the driver.

  3. printing with Canon provided in Cap.  After you have installed the plug of the supplied disc, in LR, go to file > Options of the plug-in > Canon Print Studio Pro.

  Like Lightroom fan, addict and supporter of everything that said J Kost, I was using #1 and love for landscapes.  I had to work a bit to find a way to turn off the printer as well as examples of J Kost for Epson.  Then I tried to print a picture of my granddaughter and her cheeks kept getting a little purple.  When I checked the Preview button before printing in the printer driver, I could see the change in color of the preview of LR.

  I went to #2 where the printer takes the decisions.  Extracts matched and stopped the cheeks blush.

  Then, I looked at a video conference conducted by a specialist of Canon products on the Web B & H Photo site in an hour.  It's the Canon plug-in demo.  I am strongly considering using that in the future.  I hope that Kost J will not be upset with me!  It seems that the Canon plug-in really has better control of quality on the printing process.

  A particularly interesting feature of the plug-in is a test sheet that looks like a sheet of evidence.  There are a bunch of thumbnails printed on a single sheet with a different color casts and numbers of adjustment under them.  Once you choose one that is 'just', you can save the setting as a "Preset" for that paper.

  Note that in the long video, Canon representative insisted on the support of 3 papers of party in the plug-in.

  Too long video was worth the investment of time.  I understand my printer and more watching him.  The link: http://www.bhphotovideo.com/indepth/photography/tips-solutions/canon-pixma-professional-in kjet-printers-exactly-you-considered

  Bill