The analysis of lists in PL/JSON
I'm working on parsing a json string that is stored in a CLOB table in oracle 11g. This process belongs to a long analysis of routine which analyzes the data and stores the values in another table, and I just noticed that part of my data is not out. The json analysis and valid with JSONLint. So I simplified the analysis to try to find out where I'm wrong.
So my json out of my table looks like this.
{
'JSON_data': {}
"plant_id": "3006."
"transmit_time": "2015-12-18 11:57:45."
'messages': [{}
'work_msg': {}
"msg_time": "2015-06-23 04:54:17", ".
"trigger_type':"interval. "
'vert_correction': 358,3,
'ch_latitude': 37.916302,
'ch_longitude':-87.487365,
'ch_heading': 212,3,.
'ch_cable_port': 1029.79,
'ch_cable_stbd': 348.63,.
'ch_depth':-27.03,
'slurry_velocity': 25.71,.
'slurry_density': 1.02,.
'ch_rpm': 205.49,.
'ch_psi': 540.89.
'prod_instantaneous': 0,
'prod_cumulative': 1216.100000,
'outfall_latitude': 37.915967,
'outfall_longitude':-87.484369,
'outfall_heading': 120,7,.
"pump_entries": [{}
'pump_name': 'main ',.
'empty': 12.73.
'outlet_psi': 22,88
}],
"spud_entries": [{}
'position': 6
}]
},
'pipe_length_event': {}
"msg_time": "2015-06-23 04:54:17", ".
"length_floating": 970
}
}]
}
}
My analysis is properly find and do his thing with the data "work_msg". It's the data 'pipe_length_event' that I don't get to. Here is my pl/sql procedure.
DECLARE
vCONTENT CLOB.
v_parent_json json;
v_json_message_list json_list;
v_json_message_list_value json_value;
v_parent_json_value json_value;
BEGIN
SELECT CONTENT IN SJM_TEMP4 vCONTENT;
v_parent_json: = json (vCONTENT);
v_parent_json: = json (v_parent_json.get (1));
v_json_message_list: = json_list (v_parent_json.get ('messages'));
DBMS_OUTPUT. Put_line (v_json_message_list. (Count);
for message_loop_counter in 1... loop v_json_message_list. Count
v_parent_json_value: = json (v_json_message_list.get (message_loop_counter)) .get (1);
If v_parent_json_value.mapname = "work_msg" then
DBMS_OUTPUT. Put_line ('FOUND: work_msg');
on the other
DBMS_OUTPUT. Put_line (v_parent_json_value.mapname);
end if;
END LOOP;
END;
My dbms_output first gives me a sublist from 1 account. 2. not so my analysis does not yet recognize the 'pipe_length_event' as a sublist of "messages".
How can I get data 'pipe_length_event' by using this procedure? I am almost sure that it worked in the past, so my first thought is that json is formatted differently. Is the json in the wrong format?
Thanks in advance.
They moved their forums to StackOverflow. I had posted my question there before here. In any case, I found my own answer. JSON is not properly formatted. The 'work_msg' was not closed correctly, and "pipe_length_event" has not been opened in a new list. So once I had that all squared away he analysed very well.
For reference, the correct formatting is below.
{
'JSON_data': {}
"plant_id": "3006."
"transmit_time": "2015-12-18 11:57:45."
'messages': [{}
'work_msg': {}
"msg_time": "2015-06-23 04:54:17", ".
"trigger_type':"interval. "
'vert_correction': 358,3,
'ch_latitude': 37.916302,
'ch_longitude':-87.487365,
'ch_heading': 212,3,.
'ch_cable_port': 1029.79,
'ch_cable_stbd': 348.63,.
'ch_depth':-27.03,
'slurry_velocity': 25.71,.
'slurry_density': 1.02,.
'ch_rpm': 205.49,.
'ch_psi': 540.89.
'prod_instantaneous': 0,
'prod_cumulative': 1216.100000,
'outfall_latitude': 37.915967,
'outfall_longitude':-87.484369,
'outfall_heading': 120,7,.
"pump_entries": [{}
'pump_name': 'main ',.
'empty': 12.73.
'outlet_psi': 22,88
}],
"spud_entries": [{}
'position': 6
}]
}
}, {
'pipe_length_event': {}
"msg_time": "2015-06-23 04:54:17", ".
"length_floating": 970
}
}]
}
}
Tags: Database
Similar Questions
-
Need to help in the analysis of string in JSON using PLJSON
Hello
I have JSON stored in a database field:
-Query
Select data1 from table1 where id = 339207152427;
-Results:
[{'name': 'Home'}, {'code': 'JPNWC74ZKW9'}, {'start date': ' 01\/02\/2014'}, {'name': "hhh, Rams '}]
I need to analyze the above results in 3 fields in a separate table. For now, I just try to analyze the results using PLJSON, but get ORA-20101: JSON Parser exception - no {beginning found error during the execution of the following pl/sql block:}
declare
VIN_JSON varchar2 (4000);
jsonObj json;
listOfValues json_list;
listElement json_value;
Start
Select data1 in VIN_JSON from table1 where id = 339207152427;
jsonObj: = new json (VIN_JSON);
listOfValues: = jsonObj.get_values ();
I'm looping 1.listOfValues.count
listElement: = listOfValues.get (i);
end loop;
end;
/
I believe that my syntax is close, but was hoping some new instructions.
Thanks in advance!
JohnThe brackets indicate a list. If you already have a list and new json may not work.
listOfValues := json_list(VIN_JSON);
Published by: chris227 on 25.02.2013 12:52
-
I tried to uninstall some programs in the Panel, he said the analysis failed, what is the analysis
and how fix this annoying problem, there are many games that have been removed from Office
on it, should I uninstall in Control Panel as well. Thank you
Hi tengarertermoana,
Here are many sources that define the analysis - pick a bit until you understand: http://www.bing.com/search?q=Parsing+Error+Definition&FORM=QSRE1.
But the real problem is that you deleted games from the desktop instead of deleting or uninstalling them and so the standard uninstall process is now having trouble functioning.
In this case, I recommend you download Revo http://www.revouninstaller.com/revo_uninstaller_free_download.html (the free one for now), install and run it in advanced mode to uninstall and completely remove these programs from games. It often works where standard uninstallation fails.
If it turns out that some of the games do not appear in CP programs to uninstall and also not appear in Revo but you know they still exist on the system for some reason any - even though you did not mention that as a question (perhaps see it in Windows Explorer or in the registry (don't mess with the registry to change it here - just to see if you can find any evidence) , then the paid PRO version of Revo (with a try free 30 days you can cancel when done and then re-install the version free of charge as it is a great tool and I want to uninstall everything in advanced mode because it works better and keeps the System cleaner) has a partial ability to find remainders of programs that do not appear in the list. It's one of the reasons people pay for it - but I don't think that you need and not worth the money when the free version has almost always been around.
I hope this helps.
Good luck!
Kosh
-
The analyses are not in line. OfficeJet 8500 has more
My OfficeJet 8500 has more analysis not evenly. The upper left area is darker than the rest of the document. A way to fix this?
If you have performed all troubleshooting, including the cleaning of the surface of glass scanner, then I would say you are right in your assessment of the defect. How long have you had the replacement product?
However, I have one last thing, I would like for you to try. I have the steps for to do you a factory reset on the printer. I'll send them to you via private message. Please check your Inbox for messages in the forum. Before you perform these steps, please read Bob_Headrick wire on the printer reset, found here.
If the product is still under warranty, then I suggest call HP for Technical Support on this device. If you are in the USA / Canada, then the number to dial is 1-800-474-6836. If you are not in this area, please click here to access the global contact list for HP Technical Support.
-
Last month, my office has been freezing almost whenever I connect, I rebooted my laptop or close and turned on afterwards. The way I know that it is frozen is when my wifi icon is the blue loading circle and when I right click on my slider and it is located in the blue loading circle. Then after I do a restart hard (hold the power button and back - turn on my laptop), after the screen usual "the computer did not turned off properly", I see "scan disk" screen Even if I touch any key so analysis can run and maybe find the problem, the analysis is automatically cancelled. I pass this cycle at least twice before being able to use my computer properly.
I've had my laptop for 4 years. It is a Dell Inspiron N5010 Windows 7 Ultimate 64 - bit Intel Core i3 processor. For safety, I got Kaspersky Internet Security for one year. Is there anything that can be done to prevent it happening again?
Hello
You can check with Dell, their books online technical support, diagnostics,
and ask questions in the forums about known problems.Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/Dell PC Diagnostics
http://www.Dell.com/support/Diagnostics/us/en/19/
==============================Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911Windows hangs or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">->
http://support.Microsoft.com/kb/2681286#method22Performance and Maintenance<- check="" these="" especially="" the="">->
http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1Other methods of troubleshooting to use according to your needs:
Use the startup clean and other methods to try to determine the cause of and/or
eliminate problems.---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Include
everything you've ALWAYS had on this machine, including those you have uninstalled (they
remains of leave behind which can cause strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows
Vista or Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performanceOpen the troubleshooter of Performance
http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-TroubleshooterTo see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at Applications.
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor file system, registry, process, thread and DLL
activity in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp
Many excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded: run DriverView - set
SEE drivers to hide Microsoft - update those without drain in their names. (Also
updated the BIOS and drivers from the chipset on the site of the constructor/the system motherboard).-Free - DriverView utility displays the list of all device drivers currently loaded
on your system. For each driver in the list, additional useful information is
Poster: load address of the driver, description, version, product name,.
company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit Maker as replacements and system manufacturer of device which are
the most recent. Control Panel - write - graphics card - device manager
the brand and complete model of your video card - double click - tab of the driver-
Note the version information. Now click on UPdate Driver (this can do nothing
MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
If there are 3rd party with their own software and drivers and the other main device drivers
you have.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
their latest versions. (Look for the system to update the BIOS, Chipset and software updates
Site of the manufacturer here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
REBOOT after each installation.Always check in the Device Manager - drivers tab to be sure the version you are
installation actually appears. This is because that some rollback of drivers before the
later is installed (particularly that audio drivers) so install a driver - reboot.
Make sure that it is installed and repeat if necessary.Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
SCANNER - check manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using
the above methods is preferable to ensure the latest drivers from the manufacturer of system
and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable driver facilities
in the updates of Windows, which leaves on Windows updates, but it will not be installed
pilots who are generally older and cause problems. If updates provides a new
driver then hide it (right click on it) and then go get new ones manually if
you want.How to stop Windows 7 automatically install drivers
http://support.Microsoft.com/kb/2500967===========================================
Refer to these discussions because many more excellent advice however remember to check
your antivirus, the main drivers and BIOS update programs and also to solve problems
with the first method cleanboot.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
How can you get rid of the drop-down list such as videos in my photo folder?
I accidentally deleted the video file in my photo folder, I thought that he would have pulled down I would be able to copy / paste this back, but he didn't. Instead it copied itself and left a drop annoying low bar in my photo folder, in which he used to let me delete it, or even hide. Help...:)
Hello
I guess you are referring to the drop-down list option videos list to include in the library in the photo folder.
The option is available, even if a video file is not included in the folder.
You can delete or copy and paste the video file to another folder.
If you are referring to any other menu drop-down then validate a screen so that we can analyse the question better.
Please visit the sites below:
Take a screen capture (print your screen)
http://Windows.Microsoft.com/en-us/Windows7/take-a-screen-capture-print-your-screen
How i: post a screen shot on this forum?
-
Variables of passage of the Agent to the analysis
I work in OBIEE 11.1.1.7 and I'm unable to variable assignment through an agent. I have columns that are derived from the variables configured on the tab guests.
For example:
Year (Production_Date) = @{p_report_year}
or
Year (Production_Date) = @{p_report_year} - 1
When the analysis is run manually, it invites to the variable and then runs correctly. I don't understand how to assign a value to this variable using the Scheduler. The agents I create correctly assign values to the filters that I have listed as "column is invited", but I do not know how to assign to this variable using the agent Scheduler.
Can anyone help?
Thanks in advance!
Can be dynamic (there are those static and dynamic) and session variables are dynamic in nature by default - they are instantiated for each user session - and are system or no system variable repository.
Here's the documentation: https://docs.oracle.com/cd/E28280_01/bi.1111/e10540/variables.htm#BIEMG3104
You never have the case where a scheduled agent "chooses" is a value from a command as a user - prompt there is simply no user doing the action of the selection. You must think about what your condition is and how you can reflect this in a variable to the RPD.
-
Bug in iOS 10 music "to the top following' list
A great feature of iOS9 was the ability to remove pieces from the list 'to the top following"in the Apple's music. You could allow a random music mix, but eliminate all the "buzz-kill" of future playlist songs. I used it all the time. But there seems to be a bug in this feature in music iOS10...
In iOS10 when I remove a song from the playlist "in following" the song (or songs) disappear when I slide to the left and press the Red 'delete '. But when the course of playing the song ends and its time to start the next song in the list "in following" songs previously removed reappear magically in the playlist.
If I still remove the songs in the list "in following", even once during playback of the song ends - all the songs you removed reappear again.
If I turn the IPhone Off + 6, then on the "next site" list will work correctly when the songs are removed for maybe 3-4 songs, but by the song 4 songs deleted reappears, and the cycle repeats. If it's intermittent.
I was a heavy user of remove songs from the list "in following"... a little disappointed this feature does not work correctly.
Everyone?
See you soon,.
Q.
Another thread in this forum on the same topic.
-
MISSING OBJECTS IN THE IPHOTO SOURCE LIST
1. lack of points of the iphoto source list such as: places, trash (I have all of the photos, last import, Favorites, videos). How can I restore what is missing?
2. under iphoto events are lists date of the photos. However, the only ones that have a picture on the tile are in 2014. I 2015 dates shown with a blank tile left and I have none for 2016.
3. I have dropbox, but my photos are not synchronized with all my devices. My iMac has all the photos, but each of them does not flow to my macbook. There is partial proof of 2014 and 2015 photos in the macbook (so some transferred) and all to see the 2016.
4. when I click on a photo I do not get the arrow pointing down to the context menu and I don't have an icon or anything to click for editing. I can rotate.
Help! What is my problem? Thank you!
1. to begin, we need details - what version of the operating system and iPhoto do you use?
2 - explain that statement in detail
I have dropbox, but my photos are not synchronized with all my devices. My iMac has all the photos, but each of them does not flow to my macbook. There is partial proof of 2014 and 2015 photos in the macbook (so some transferred) and all to see the 2016.
If your iPhoto library is being synchronized by using DropBox is your problem - you can not ever do this - that the iPhoto application can be used to change the iPhoto library - if you put on DropBox and sync, it you destroy
LN
-
Hi, useful friends Firefox,.
I need help to reorganize my combo of bookmarks to make things run in the way that I like. I am former fighter user of Firefox (and Mozilla/Composer etc. way back when). I use Firefox 42.0 on openSUSE 13.2. These two are completely up to date. I'm a fan of Firefox, which is the only browser that I use on my laptop.
My question is about how to prefix some unwanted with "ZZZ -" titles to make sure they appear only at the bottom of the drop-down list of bookmarks, rather than at the top. The problem is that these six tracks only appear on the list box dropdown bookmarks when I press < Alt > + < B >. They do not appear in the window "library / all bookmarks" in a way I can modify them to insert the prefix. The six titles that I want to move to a more appropriate (and less prominent) space in the list are:
View all bookmarks
Bookmark this page
Subscribe to this page
To bookmark all tabs
Bookmarks toolbar
Download bookmark modulesI won't be taken away entirely optional. That's why I wish they were downstairs. I just want to get them out of sight, since I was a very organized hierarchy within my bookmark system. I always use strikes, never the pointer clicks, allowing access to my favorites. Those with six in my view area when I opened my favorites to get some desired that URL seems unnecessary. By placing a prefix ZZZ - in front of them, they in alphabetical index would be at the bottom of the list, rather than at the top.
I would like any ideas you have to help me move these six titles.
Thank you
Dave
Those are the elements that appear in the list by default.
You can try to give them a higher value of - moz-box-ordinal-group to reorder the items and move them down.
All items have to - moz-box-ordinal-group: 1 by default.
You can set the number to set a specific order of each of the elements.Add code to the file userChrome.css below default @namespace.
@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */ #bookmarksToolbarFolderMenu,#bookmarksMenuItemsSeparator {-moz-box-ordinal-group:10} #bookmarksShowAll, #organizeBookmarksSeparator {-moz-box-ordinal-group:15} #menu_bookmarkThisPage, #subscribeToPageMenuitem, #menu_bookmarkAllTabs {-moz-box-ordinal-group:11} #menu_unsortedBookmarks {}
The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.
See also *.
- DOM Inspector: https://addons.mozilla.org/firefox/addon/dom-inspector-6622/
-
TB 31.7 W7, how can I change the police in the "all folders" list on the left?
TB 31.7 on W7
How can I change the police in the "all folders" list on the left?I was also unable to change the position of the icons on the e-mail toolbar in a message window. When I try to drag a box icon from the tool bar customize I get a symbol of the circle with a line through it, rather than the vertical bar I expect.
Something like that?
http://forums.mozillazine.org/viewtopic.php?f=30 & t = 2834207
Note that the name of the folder and the name are case-sensitive. It must be userChrome.css and it must be placed in a folder named chrome.
Finittary poster regularly wrote something about this recently. It may be possible to find this thread on this forum.
The inability to drag or move a button usually means that you have opened the pane customization evil.
-
I'm trying to import and backup/restore/Choose file... / after backup correctly and I see the file, but there is no JSON extension. What can I do?
I backed up my favorites using 'import and backup/Backup' on an external HD, installed Windows 10 and went to restore my bookmarks and noticed the file named "Firefox bookmarks-2015-09-04"had no extension and does not work."
Please advise! Thank you! Sincerely, s
If you add the .json extension, it works then? Why people who design browsers or extensions them do create files with no extension name, in spite that these extension names are essential to make the files can be restored? I could never understand that.
-
I can't find my old emails that is to say the last 4 years e-mails have disappeared. I can't see in the 'archives' folder list and also in my list of "local" files
I recently formatted my system. It causes this problem? Is there anyway to recover my emails?Assuming that really format you your hard drive.
Can erase you every single entry to a file, message, photo, program, document, etc. When you select format you get warnings on this subject.
The format is the last thing you want to do without going through a backup of your personal and important files.Local folders is automatically created when you installed Tbird.
And it is empty until you move something over there.
(Your former local folder with all its files and messages has been removed under format).Only messages that are still on your server (stbeehive.oracle.com) can be recovered.
-
Delet several addresses in the drop-down list on the e-mail page
on the page of the mail, the box where you put the address in I put the first letter of the address and a drop-down list box appears with several address of the person even all but 1 is false. I went to the address book, and there is only one address of this place.
How can I remove all the wrong address in the drop-down list?
Thank you
HerbalifemanLook for these wrong email addresses in your address book and remove them.
Make sure to look in all address books you may have, including the "collected addresses". -
Hi, I'm using Firefox on a mac, a windows and a samsung galaxy S3 sync. Since the last version of Firefox (35) I noticed that the phone itself lists as a device, between Panel "synchronized tabs. It's never happened before.
(the mac and the pc correctly list only other devices, not themselves).Can you tell how to fix it?
Thank youHi gioferret:
Looks like a bug that also, I can not reproduce (but we do not have a similar bug as goes for the overlay that shows share the same Firefox https://bugzilla.mozilla.org/show_bug.cgi?id=1122302) . I'll see if I can find a bug you report. If I can't I'll fill a bug report and post a link here.
See you soon!
... Roland
Maybe you are looking for
-
How do I defragment & cleaning Satellite C650 with Windows 7
How do I defragment & cleaning Satellite C650 with Windows 7?
-
Title: cannot open Add/Remove programs in the control panel When I try to open Add/Remove programs in the Control Panel, I get a message that it can not be found. What should I do to repair this?
-
Hey, pleas, how I can download Windows 7 from Microsoft Official! I already have a product key!
-
X 220 and III Crucial M4 SSD 512 GB
Someone at - it experience to install Crucial M4 512 GB SSD in the X 220? It shows "7 mm", so I guess it must be very well in X 220. I know there are a squillion on SSD replacement wires, and I searched, but wanted to double check before shelling out
-
5.1 management persona profile folder created with the locked permissions
We have a VMware View 5.1 environment and test a Persona management application. When a user logs on for the first time and the profile folder is created, the user is the owner, and no other access is without an admin taking possession of the record.