The application effect Alpha using advanced Actions

Similar Questions

• using advanced actions to make a button appear at the end of my project - HELP

  I'm working to build a set of advanced actions, which allow a user display the buttons at the end of the test based on the responses of the text entry box. The plan that I've discovered so far is:

  1. on the slide after the TEB, I have a conditional action that uses IF cpQuizInfoLastSlidePointScored = 1, and THEN assign the Variable 1 to 1 (the variable is set to 0)

  2. at the end of the test, I have an advance action that declares the variable = 1 IF THEN hide button (the button says they did hide the bad action means they did as the correct input) ELSE view button

  I have a total of 23 of these interactions TEB

  Everything works perfectly if each answer is correct

  Everything works perfectly if each answer is wrong

  Arrises them problem when alone or some answers are wrong. When that happens, no buttons appear.

  I built a debug slide and be positive for each Variable, I built received the first interaction.

  so, what could I have done wrong on my process? Any help would be appreciated.

  Always nice to hear from someone who likes my book.

  A thing, you have not made it clear to me yet.  You say that you are running the first action 'at the entrance to the next slide. I guess you mean using the event YOU enter the quiz question slide slide follows?

  Then, you mention that "at the end of the process," you have a blank slide that performs the final conditional action.  I assume that you mean that you use the event YOU enter Slide for the Quiz results slide where your buttons is displayed?  You won't be able to perform actions SHOW/HIDE objects on slides other than the one where the action is executed.

  My personal preference to set the variables on each quiz slide would be to use the event on the success of the quiz slide just to set the variable directly instead of using a decision of conditional action block as you did. If your quiz questions are all together for a moment of success, then just using the action of success WE should have the same result, but it's just more direct and so less inclined to any question (for example if, for some reason, the system cpQuizInfo variable did not work, your event on success should always pulled).

  In theory, your way (using the system variable) should work too, but sometimes if there are several ways to do something and your current path does not work, try them the other way around can get out you of trouble.

  I guess that your final conditional action has something ELSE for each block of decision which SHOWS the button?

  One thing that also that Lilybiri would probably say, that you are trying to rename all your blocks of decision in the last conditional action.  It could be one of the names of your decision blocks is originally a kind of conflict.  I noticed that you have a name of decision block with a punctuation of hash character.  Not a good idea.

• How can I add audio to tabs using advanced Actions?

  I used the following tutorials to create a slide tabbed with navigatiion locked in Captivate 5.5 (I use Advanced Actions to activiate the continue button only once you click on all the tabs).

  http://blogs.Adobe.com/Captivate/2011...

  http://forums.Adobe.com/message/40464...

  I have audio intro associated with the slide, which plays on enter. Does anyone know how I can add audio to each tab by using advanced Actions? When I tried this, all audio files played at the same time, above the other.

  I appreciate all help.

  Recently, I blogged about the control of audio objects, maybe that article could help you:

  http://lilybiri.posterous.com/audio-objects-control-them

  Here is another example, where I used a lot of audio attached to all kinds of objects:

  http://lilybiri.posterous.com/playtime-with-audio-and-widgets

  The idea is that you attach audio to an object that can be invisible to the user (I explained I have a special highlight for this purpose style) and you show the object action advanced, which means that when the audio will start playing. You probably also will have to stop audio (to avoid the two clips play together) when the user clicks on another tab, in which case he has not done. So if you have 3 tabs, you have 3 audio objects and with advanced actions always show you an audio object and hide the other 2.

  Lilybiri

• using advanced actions to determine if the correct keys have been selected

  I use Captivate 5 on Windows 7 to create a quiz that will test the ability of the users to select inappropriate e-mail parts by clicking on them.  So far, I have set up the scene and left buttons to image for each item in the email.  Each sentence, the address line, the subject line, etc it's own image button.  The goal is to create a user by clicking on the item of electronic mail and it highlighted red (selected).  Once the user has highlighted all the elements that they think is inappropriate, it will be then click on the ' send' button (button image), that will calculate if the correct image buttons have been selected.

  Here is an example of the stage with all image buttons:

  

  My question is how I would start setting up advanced actions 1) select each button when you click it, and then turn off highlight when clicked again) 2 calculate if the correct buttons are selected when you click on the button send 3) the user to correct or incorrect slide, based on their selections

  Thanks in advance for any help you can provide.

  FOR INFO.  The right answer for this mail would be if

  Button_15

  Button_17

  Button_18

  are selected and

  Button_12

  Button_16

  Button_19

  Button_20

  Button_21

  Button_22

  are not selected

  OK, an example of file which seems to work. I created in Captivate 6 but the workflow will be the same in 5.5. Avoided using the new features. I used boxes to click on text fragments. I was wondering if you want to limit the number of fragments which can be clicked (is not in the scenario):

  • Enter by clicking on the parts of text, their labeled CB1_NOK, CB_2OK,... even if it is not so important if she'll give a score or not. I had 3 good.
  • To correct, click boxes, I added a score (5) in the accordion reporting, audited include in Quiz and add to the Total. to bad I did nothing in this accordion; Click on boxes have a break before the break of the button check, I've shortened their duration at 2secs, while check button stops at 2.5secs
  • I put a partially transparent rectangle on each fragment of text that has been set to invisible at the beginning (properties panel), marked their HL1, HL2,...
  • Created a variable user for each area of click with an initial value of 0: v_cb1, v_cb2, v_cb3...
    
  • Created a conditional action advanced for each box, used two decisions (but Then/Else was also possible), labeled them even as a click box (is possible if the click is first box). Here are the screenshots as an example of the second click box; ATTENTION: the sequence of the first and second decisions is important:
    

  

  • The Check button triggers another conditional action, where I check the variable cpQuizInfoPointsscored of system and branch to the appropriate slide. I used a slide "Correct" and "Incorrect":
  
  
  

  Lilybiri

• Is it possible to use advanced actions to set the value of the question?

  Hi - I am trying to develop a course of Captivate 4 and wish I could on slide enter advanced use of actions to check the value of a user variable, and if the variable is equal to x then set the value of the question (correct) 1. Is there a system variable, that I can use to define?

  This course is to download a package to an LMS (Moodle) SCORM.

  Ideas/suggestions would be greatly appreciated.

  Unfortunately, Captivate is not currently a way to manipulate SCORM score via advanced Actions and the user or System Variables.

  So that you could have OnSlideEnter check and set the value of a variable, you don't have a way to use this information to force sending a question slide.

• Use advanced actions to hide any object of a certain type

  I am building an interaction where learners click an image (button_puzzle1) to reveal a legend (caption_puzzle1). I'm creating a scale by which effect the button_puzzle1 skin button_puzzle1 and watch button_puzzle1a click. Then by clicking on button_puzzle1a will hide again the legend and show button_puzzle1. But there is no way to force the learner the subtitle, before they click on another piece of the puzzle, which opens another legend.

  So when the student clicks on another piece of the puzzle, I need some legend can show to be hidden before she reveals the related legend. For example, if the student clicks on button_puzzle1 to bring up the caption_puzzle1, then click on button_puzzle2, I need caption_puzzle1 to hide before caption_puzzle2 can be demonstrated.

  All the legends to sit on top of the other, so a work around would be to have the 'active' Legend pop up, but it is not a first Front tip action.

  Here is a screenshot:

  

  Thank you!

  Thank you!

  Hi, you use CP6, right?

  It's my solution (take a look at the Youtube link):

  • All the legends group, will be the label of the Gr_Captions group
  • In each advanced action triggered by a click box, insert the statement 'hide Gr_Captions' before the statement "Captionx Show"
    

  Here is the link: http://www.youtube.com/watch?v=Sy09xPoP69A

  Lilybiri

• Use advanced Actions show different slide

  Hello

  I am using Captivate 5 and have a problem with the display of an image with a tip action.

  I am trying to create a simple table of contents custom. I can't use integrated OCD because, as far as I know, there is no option to have appear only at the beginning of the project - it is available as long as the project is open. It is a problem for me, since I have limited screen real estate, so I can not have it on the side, and I can't bunk it. Anyway, I digress.

  At the end of each topic, I want the user to return to the table of contents and see an indicator of subjects duly filled in. I added an image which is hidden initially on the TOC next to each topic list. Then, on the question slide, the user presses navigation button, a tip action uses 'show' to make the image on visible table of contents slide and then refers the user to the table of contents. Unfortunately, the image still remains hidden.

  If the image is on the same blade that the tip action, everything works. I can also add a user variable that updates a text caption on the slide table of contents of a fast action on the slide for the topic.

  Is it possible to display an image with a tip of a different slide action?

  I see in one of the posts of Lilybiri (http://lilybiri.posterous.com/playing-hide-and-seek-with-captivate-objects):

  "You can apply action show only to objects that are really on the slide.
  e.g. you put a rectangle on slide 1, the value "Display for the rest of the project." If it is initially hidden, you can show only on slide 1, not on slides 2, 3, etc."

  However, there is a reference to "when using"Display for the rest of the project. I don't know if this limit also applies to my situation, but I suspect it might be the cause of the problem.

  As an alternative, I tried setting a variable that changes when the slide of the subject is visited. A conditional action then shows the image on the table of contents. Unfortunately I do not know how to trigger this action, as it should be something like an action "on the slide open", and I do not know if such a thing exists. In addition, this approach seems too complex.

  Any help would be greatly appreciated.

  You are right that advanced Actions will be able to SHOW or HIDE an object on the current slide you are watching.  They have no effect on another slide that is not currently displayed.

  So what you have to do is assign the User Variables for each section of the project that the user has completed and Actions conditional Advanced triggered by the OnSlideEnter of the menu slide event allows to detect if the user has completed a section given by the value of the variable user for this section.

• Micro-Navigation (using advanced Actions) behaves badly in published project

  I have build in Captivate 9 and must give the user the possibility to jump back to specific "scenes" in a slide.  These scenes have no specific markers - they are just subsections of the lesson on the slide.

  I followed some excellent tips gleaned from Lilybiriblog articles to create my own front and rear buttons, jump on the next breakpoint.

  To achieve this, I created a tip with 9 decisions (one for each scene) Action, and every decision said "If currentFrame is between x and y, go to openingFrame + z..  I used the property to enter the slide to set the openingFrame variable in the slide.  In this way, when the button is engaged (front or back), the lesson goes directly at the beginning or at the end of the current 'scene '.

  Well, I spent a good 2-3 hours previewing the slide and refine the Action advanced to what it worked exactly as you want, and then I wrote...

  To my great disappointment, by clicking on the next button since the beginning of the slide, the lesson jumped right to the end of the slide (which is the action for decision 9 and should only enable if the currentFrame > 2041)

  When I then click on the back button on the end of the slide, it would take me back to frame 2030 (where it should bring back me at the beginning of the slide, by progressive clicks).

  I then tried the preview of the whole project and got the same result.

  It seems that the tip Action works as it should if I get a preview of the slide, but as soon as the other slides are published, all but the last decision of the tip Action are ignored!

  I'm writing this, I give account of a workaround would be to break up the blade in a number of slides-, each holding a scene. This means a lot of extra work and give a very messy result. As much as I plan a number of similar sections of lesson and want to end up with a long list of slides that are actually part of the same section of the lesson.

  The other alternative is to learn Javascript and use it to create the nested IF statement - that sounds like a lot of overhead and puzzle to make something that looks like it was designed to operate within 9 Captivate.

  I hope that logical - you would be very grateful if anyone can shed some light?

  How and when did the variable 'openingframe' gets its value? The event that is used to assign a value to this var?

  The event that triggers this conditional action? You have other interactive objects on the slide to this event? Maybe post a screenshot of the timeline.

  I suspect that this could be done in another way, less complicated. But I need more information. Last jump is more 2063 frames, which means little more than a minute: who is the duration of a slide? Navigation Frame is never very says, that personally I wouldn't use it for these big jumps, but try to split this slide in multiple slides, which would mean you will have more than one frame of departure and you won't have that many. Is - that follow you the action by inserting the two variables 'openingframe' and 'cpInfoCurrentFrame' in a text container?  Just a couple of ideas, because I suspect that the value of "openingframe" is not correct. Where my first questions.

• Is there a way to stop the background noise by using an action?

  I'm trying to get a sound effect loop to play throughout the project, but to end when a specific button is pushed. This would prevent then audio for the rest of the project. Any ideas?

  You can run a background Audio loop in a project, but you can not then stop and start the audio via advanced Actions.

  There are no native way in Captivate to control the sound in the background running.  If you have access to the expertise of programming, it might be possible, but I did not do.

• I went to launch programs and got an error, a message "install you application seems to be damaged, please reinstall the application"-this message came for all the applications that I use regularly

  I went to use regular programs such as first today and hearing - at the launch I got the message error "installing your application appears to be damaged, please reinstall the application" - I CC application work fine until today? I don't know what to do

  Hi Sean

  Uninstall the creative cloud

  Run the CC cleaning tool: use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Navigate to the OOBE folder.

  Windows: [system drive]: \Users\ [user name] \AppData\Local\Adobe\OOBE

  Mac OS: /users/folder/Library/Application Support / Adobe / OOBE

  Rename the file opm.db in opm_old.db

  Installation CC: DOWNLOAD Adobe Creative Cloud apps | CC free trial Adobe

  Try to open the Premier Pro or hearing.

  I hope this helps.

  Thank you

  Varun

• the most effective configuration using vmware lab environment?

  Hello

  I have a production vmware

  infrastructure. It consists of multiple esx hosts, an iscsi san, and

  about 12 virtual machines.  I would like to get some of these machines in

  a lab environment, which is the most effective way to achieve this?

  have also a few physical machines as well, that I intend to help

  the p2v tool for.  Thank you

  1. create the VLANS separated for the Lab virtual machines and use to limit the bandwidth of the traffic shaping

  2 create a new pool of resources for the virtual laboratory machines, to control the use of resources (configure "share" = low)

  3 use/Take snapshots before allocating virtual users computers, so that you can return it back once the activity is complete.

  See you soon,.

  ~ Jean

  ~ Don't forget to points, if you found the useful answer

• Is it possible to change the definition of LOV uses dynamic action?

  Hello

  I have a multiple selection LOV page article, P27_MULTI_CLASS_CODE, defined as below.  The loading of the page, this list contains only values based on what was passed to P27_OLO_CODE or P27_OLO_CODE_SW.

  SELECT DISTINCT c.class_code d, c.class_code r

  O ORGANIZATION,

  POSITION p,

  CLASS c

  WHERE o.org_wk = p.org_wk

  AND p.class_wk = c.class_wk

  AND o.org_active_flag = 'Y '.

  AND p.pos_active_flag = 'Y '.

  AND c.class_active_flag = 'Y '.

  AND (o.olo_code =: P27_OLO_CODE)

  GOLD o.olo_code =: P27_OLO_CODE_SW)

  ORDER BY c.class_code ASC

  Before submitting the page, I want the definition of LOV's P27_MULTI_CLASS_CODE to change the following (similar application without reference to the P27_OLO_CODE or P27_OLO_CODE_SW) based on the question if the user selects a checkbox, P27_ALLOW_SW.   In doing so, P27_MULTI_CLASS_CODE would contain a wide range of values, rather than the limited values.

  SELECT DISTINCT c.class_code d, c.class_code r

  O ORGANIZATION,

  POSITION p,

  CLASS c

  WHERE o.org_wk = p.org_wk

  AND p.class_wk = c.class_wk

  AND o.org_active_flag = 'Y '.

  AND p.pos_active_flag = 'Y '.

  AND c.class_active_flag = 'Y '.

  ORDER BY c.class_code ASC

  I wanted to avoid writing Javascript.  Is this possible using dynamic measurements... or at least somehow update P27_MULTI_CLASS_CODE so that it ignores the P27_OLO_CODE and the P27_OLO_CODE_SW?

  Tried to create dynamic action to clear the value of P27_OLO_CODE or P27_OLO_CODE_SW, in the hope this would trigger P27_MULTI_CLASS_CODE to display all the values, but it has failed.  Any ideas?

  APEX 4.2

  You can do this by editing the query lov a little:

  SELECT DISTINCT c.class_code d, c.class_code r
    FROM ORGANIZATION o,
         POSITION p,
         CLASS c
  WHERE o.org_wk = p.org_wk
     AND p.class_wk = c.class_wk
     AND o.org_active_flag = 'Y'
     AND p.pos_active_flag = 'Y'
     AND c.class_active_flag = 'Y'
     AND ((:P27_ALLOW_SW = 'Y' AND (o.olo_code = :P27_OLO_CODE OR o.olo_code = :P27_OLO_CODE_SW))
          OR :P27_ALLOW_SW = 'N')
  ORDER BY c.class_code ASC
  

  (of course, use the correct value for P27_ALLOW_SW)

  The "cascade LOV Parent article (s)" value P27_ALLOW_SW and also add "Page elements to submit" element (Note: this item appears only when you have entered a value in the element of parent lov cascading items)

  Now, after changing P27_ALLOW_SW the lov will update to P27_MULTI_CLASS_CODE.

• Hello, y at - it a mobile version of email Thunderbird for iPhone 5 c? If so, what is the name of the application? Thanks in advance.

  I am a new user of Thunderbird and I would use it even on my small iPhone 5 c many found the app. What is the name of the correct application?

  There is no mobile version of Thunderbird.

• Convert logic in the application procedure by using connect by

  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production version
  
  Hi all, Can someone please help me in building the query.
  Basically, I wrote the logic in the procedure. I'm sure it can be converted into
  a single application.
  
  I'm trying to link the same person in the Group (family) using the ALIAS_NAMES
  
  Example: in the first case where link_id = 2014709
  Check in the table alias_name
  JO = JOANN
  JO = JOSEPH
  JOANN! = JOSEPH
  SO I cannt group together.
  
  IN the second case
  RON = RONALD
  So we can combine these two people.
  
  
  
  

  CREATE TABLE PEOPLE
  (
    LINK_ID     NUMBER,
    LAST_NAME   VARCHAR2(60 BYTE),
    FIRST_NAME  VARCHAR2(50 BYTE),
    FLAG        NUMBER  -- tmp identifier to delete the records later
  );
  
  CREATE TABLE FLO.ALIAS_NAMES
  (
    NICKNAME    VARCHAR2(30 BYTE),
    FIRST_NAME  VARCHAR2(30 BYTE)
  );
  
  SET DEFINE OFF;
  Insert into PEOPLE
     (LINK_ID, LAST_NAME, FIRST_NAME, FLAG)
   Values
     (2014709, 'CRABTREE', 'JOSEPH', 1);
  Insert into PEOPLE
     (LINK_ID, LAST_NAME, FIRST_NAME, FLAG)
   Values
     (2014709, 'CRABTREE', 'JO', 1);
  Insert into PEOPLE
     (LINK_ID, LAST_NAME, FIRST_NAME, FLAG)
   Values
     (2014709, 'CRABTREE', 'JOANN', 1);
  Insert into PEOPLE
     (LINK_ID, LAST_NAME, FIRST_NAME, FLAG)
   Values
     (6072, 'SIEVERS', 'RONALD', 1);
  Insert into PEOPLE
     (LINK_ID, LAST_NAME, FIRST_NAME, FLAG)
   Values
     (6072, 'SIEVERS', 'RON', 1);
  COMMIT;
  
  SET DEFINE OFF;
  Insert into ALIAS_NAMES
     (NICKNAME, FIRST_NAME)
   Values
     ('JO', 'JOANN');
  Insert into ALIAS_NAMES
     (NICKNAME, FIRST_NAME)
   Values
     ('JO', 'JOSEPH');
  Insert into ALIAS_NAMES
     (NICKNAME, FIRST_NAME)
   Values
     ('RON', 'RONALD');
  COMMIT;

   -- Including The procudure which does the above mentioned logic 
   -- if possible can some one help me in converting the below mentiond procedure into
   -- query
  
  CREATE OR REPLACE PROCEDURE Validate_on_Merge
  IS
     v_count   NUMBER := 0;
  BEGIN
     FOR I IN (SELECT   DISTINCT LINK_ID FROM PEOPLE)
     LOOP
        FOR J IN (  SELECT   *
                      FROM   PEOPLE
                     WHERE   LINK_ID = i.LINK_ID
                  ORDER BY   LINK_ID,FIRST_NAME)
        LOOP
           FOR k
           IN (  SELECT   *
                   FROM   PEOPLE
                  WHERE   LINK_ID = j.LINK_ID AND FIRST_NAME != j.FIRST_NAME
               ORDER BY   FIRST_NAME)
           LOOP
              dbms_output.put_line(k.link_id);
              SELECT   COUNT ( * )
                INTO   v_count
                FROM   ALIAS_NAMES
               WHERE   (FIRST_NAME = j.FIRST_NAME AND NICKNAME = k.FIRST_NAME)
                         OR (FIRST_NAME = k.FIRST_NAME AND NICKNAME = j.FIRST_NAME);
              IF v_count = 0
              THEN               
                 UPDATE   PEOPLE
                    SET   FLag = 0                        -- Dont Merge this set
                  WHERE   LINK_ID = j.LINK_ID;
                 EXIT;
              END IF;
           END LOOP;
  
           IF v_count = 0
           THEN
              EXIT;
           END IF;
        END LOOP;
     END LOOP;
  END;

  Thank you
  
  Published by: new learning on August 6, 2012 10:34

  new learner wrote:
  the final amount is correct, because as soon as I update all I leave the inner loop and the correcponding loop too;

  Oops, I missed the EXIT. OK, so I think I understand now. Alias, I'm the first id name and link using loop variables you used in your procedure:

  SQL> select  *
    2    from  people
    3    order by link_id
    4  /
  
     LINK_ID LAST_NAME  FIRST_NAME       FLAG
  ---------- ---------- ---------- ----------
        6072 SIEVERS    RONALD              1
        6072 SIEVERS    RON                 1
     2014709 CRABTREE   JOANN               1
     2014709 CRABTREE   JOSEPH              1
     2014709 CRABTREE   JO                  1
  
  merge
    into people t1
    using (
           with t as (
                      -- get list of first name pairs within each link id.
                      -- there is no need to use != since it will produce
                      -- duplicate first name pairs (A,B) and (B,A). If in
                      -- pair (A,B) A matches nickname and B matches alias
                      -- first name or, A matches alias first name and B
                      -- matches nickname it is obvious so does pair (B,A)
                      -- same way if pair (A,B) does not match both
                      -- conditions so does pair (B,A). So outer left join
                      -- is our match indicator. Null alias indicates no
                      -- match.
                      select  p1.link_id j_link_id,
                              p1.first_name j_first_name,
                              p2.first_name k_first_name,
                              nvl2(a.nickname,1,0) flag
                        from       people p1
                              join
                                   people p2
                                on (
                                        p1.link_id = p2.link_id
                                    and
                                        p1.rowid > p2.rowid
                                   )
                              left join
                                   alias_names a
                                on (
                                       (
                                            p1.first_name = nickname
                                        and
                                            p2.first_name = a.first_name
                                       )
                                    or
                                       (
                                            p2.first_name = nickname
                                        and
                                            p1.first_name = a.first_name
                                       )
                                   )
                     )
           select  j_link_id link_id
             from  t
             group by j_link_id
             having min(flag) = 0
          ) t2
    on (
        t1.link_id = t2.link_id
       )
    when matched
      then
        update
           set flag = 0
  /
  
  3 rows merged.
  
  SQL> select  *
    2    from  people
    3    order by link_id
    4  /
  
     LINK_ID LAST_NAME  FIRST_NAME       FLAG
  ---------- ---------- ---------- ----------
        6072 SIEVERS    RONALD              1
        6072 SIEVERS    RON                 1
     2014709 CRABTREE   JOANN               0
     2014709 CRABTREE   JOSEPH              0
     2014709 CRABTREE   JO                  0
  
  SQL> 
  

  SY.

• Numbers crash when the application effect in after effects CC

  I had this problem for a month or two now. Whenever I try to apply the effect, After Effects immediately breaks down and recorded a second version of the project.

  Here is the information provided by the accident report:

  Process: After Effects [1146]

  Path: / Applications/Adobe After Effects CC/Adobe After Effects CC.app/Contents/MacOS/After effects

  ID: com.adobe.AfterEffects

  Version: 12.0 (12.0)

  Code type: X 86-64 (Native)

  Parent process: launchd [177]

  User ID: 501

  Date/time: 2013-09-18 12:46:07.777-0700

  OS version: Mac OS X 10.8.4 (12E55)

  Report Version: 10

  Interval since last report: 14217 sec

  Crashes since last report: 2

  Per-App interval since last report: 221408 sec

  Per-App crashes since last report: 2

  Anonymous UUID: 387CA782-C5C5-43FA-3905-FBF2343641E8

  Please let me know if anyone knows of an update, or a solution to this. I do not have to return to CS6 just to apply the effect numbers.

  Thank you

  Today, we released update after effects CC (12.1), which fixes this bug.

  Let us know how it works for you when you tried with the updated version.