the most effective configuration using vmware lab environment?

Similar Questions

• The most effective component to use

  What is the most effective component to use a piece of a single line of dynamic text?
  A Lable; TextInput or TextArea components?
  
  I would like to use the more appropriate for a single line of dynamic text.
  Also the esiest of style component I want to 3 sizes of text and being able to change the background.
  
  I also tried to use the custom declaration and do not know if it would be appropriate or overkill:
  Import mx.styles.CSSStyleDeclaration;
  var new_style:Object = new CSSStyleDeclaration();
  _Global.styles.myLableStyle = new_style;
  new_style. SetStyle ("fontSize", 18);
  
  myText1.setStyle ("styleName", "myLableStyle");
  
  When I use the setStyle it seems to work very well for my dynamic TextInput.
  Any info on these components would be really useful.
  
  Please see code is attached as a reference to what I want to do.
  Thank you.
  Bell W.

  W assume that I wonder, why not just create an instance of TextField? rather than use a component to a single line. You can always ask your TextFormat object to the field on instantiation.

• The most effective way to log data and read simultaneously (DAQmx, PDM) high data rates

  Hello
   
  I want to acquire the data of several Modules cDAQ using several chassis to
  high data rates (100 k samples per second if possible). Let's say the measurement time is 10 minutes and we got a large number of channels (40 for example). The measured data is written to a PDM file. I guess, the memory or the HARD disk speed is the limits. For the user, there must be a possibility to view the selection of channels in a graph during the measurement.

  My question: what is the best and most effective way to save and read data at the same time?

  First of all, I use an architecture of producer-consumer and I don't want to write and display the data in the same loop. I expect two possibilities:

  [1] to use the 'DAQmx configure logging.vi' with the operation 'journal and read' to write the data to a PDM file. To display the data in a second loop, I would create a DVR samples documented and 'sent' the DVR for the second loop, where the data will be displayed in a graph (data value reference). This method has the disadvantage that the data of all channels is copied into memory. Correct me if I'm wrong.

  [2] use 'DAQmx configure logging.vi', but only with the "journal" operation to write the data to a PDM file. To view the selected data, I had read a number of samples of the TDMS file in the second loop (I'm currently writing the TDMS file). In this case, I have only one copy data from the selected channels (not), but there will be more HARD drive accesses necessary.

  What is the most effective and efficient solution in this case?

  Are there ways to connect and read data with high frequencies of sampling?

  Thank you for your help.

  You say that the measurement time is 10 minutes. If you have 40 channels and you enjoy all CHs at 100 kHz, it is quite a number of values.

  In this case, I always try to approach under the conditions of use. If a measure is only 10 minutes, I just connect all PDM data and create a graphic module that could be in the same loop of consumers where connect you the data. You can always work on the raw data files big offline afterwards, the extraction of all the information you need (have a look at the product called NI DIAdem: http://www.ni.com/diadem/)

  The main issue is that the user needs to see in the graph (or perhaps a chart can be useful too). Lets say that the graph is 1024 pixels wide. It makes no sense to show multiple data to 1024 points, Yes? Every second will produce you 100 data points k per channel. What is the useful information, which should see your username? It depends on the application. In similar cases, I usually use some kind of data reduction method: I use a moving average (Point by point Mean.VI for example) with a size of the interval of 100. This way you get 100 data points of 1000 per channel every second. If you feed your graph every second with these average values, it will be able to data points in 1024 of the store (as a default) by channel (curve), which is a little more than 10 minutes, so that the user will see the entire measurement.

  So it depends on the frequency at which you send data to the consumer. For example, collect you values 1024 by iteration of the producer and send it to the consumer. Here you can make a normal means calc or a bearing (according to your needs) and he draw a graphic. This way your chart will display only the values of the last 10 seconds...

  Once I programmed some kind of module where I use a chart and not a graph, and the user can specify the interval of the absolute timestamp that is traced. If the data size is larger than the size of the chart in pixels, the module performs an average calculation in order to reduce the number of data points. Of course, if you need to see the raw data, you can specify an interval that is small. It all depends on how you program zoom functions, etc... In my case I hade a rate of 1 Hz, so I just kept all data in RAM limiting the berries to keep 24 hours of data, so that technicians could monitor the system. In your case, given the enormous amount of data, only a file read/write approach can work, if you really need access to all of the RAW data on the fly. But I hope that the values of working capital means will be enough?

• form the most effective of condtional for many of | » s ?

  Hello

  I have an if statement that checks file extensions.

  He continues the code if file extensions filled one of the about 20 kinds:

  so

  If (ext == 'mpeg' | ext == 'mp3' |.. .etc)

  I noticed that when checking of file names 4000, there is an increase in the time between having 50 only 2 | options and 20.  It is not a problem to 4000 files, but if checking ten times that, it's just increased in time.

  I was wondering what is the most effective way to do this?  Is a table, a better way to go?

  Thanks for your help.

  Shaun

  Store extensions in a table and use the Array.IndexOf method.  If the extension exists the method returns the index of it, if not the methods return-1.

  If (extArray.IndexOf (ext) >-1) {}

  the extensin is in the table

  }

• The most effective way to store lines

  DB version: 10gRel2 and 11G
  
  
  If I want to keep a single column as structure, I would like to use associative arrays for performance reasons. Who is the most effective method to store a multicolumn line?
  
  
  You guys are using something like this

  DECLARE
    type v_emprec_array is table of emp%rowtype INDEX BY BINARY_INTEGER;
    v_emprec v_emprec_array;
  BEGIN
    select * bulk collect into v_emprec from emp where empno=7369;

  or this

   declare
    TYPE rec_UpdateEmp IS RECORD
             (
            Inpt_emp_id         t_InptId,
            Stat_Code               gt_StatCode,
            Tms_Proc                pa_TmsProc,
            Tms_Po_Flag             pa_TmsPoFlag,
            Sngl_Unit_Flag          pa_SnglUnitFlag,
            Pkt_Profile_Id          gt_ProfileId,
            Pkt_Type                pa_PktType,
            host_inpt_id            pa_HostInptId
            );
            
        rec                         rec_UpdateEmp;
    

  Ref Cursor is a better option

  create or replace procedure emp_dtls
  (
   p_sal number,
   p_result out sys_refcursor
  )
  as
  begin
   open p_result for
    select ename,sal from emp where sal>p_sal;
  end;
  /
  
  SQL> var myvar refcursor
  SQL> exec emp_dtls(2000,:myvar);
  
  PL/SQL procedure successfully completed.
  
  SQL> print myvar
  
  ENAME             SAL
  ---------- ----------
  JONES            2975
  BLAKE            2850
  CLARK            2450
  SCOTT            3000
  KING             5000
  FORD             3000
  ADAMS            7654
  

• I'm trying to download the media feature pack for windows 7n and it tell me to validate using GenuineCheck, but when I do it says that I should download the most recent version uses 64-bit window 7n

  I'm trying to download the media feature pack for windows 7n and it tell me to validate using GenuineCheck, but when I do it says that I should download the most recent version uses 64-bit window 7n

  You must use internet explore 32 bit.

• The most effective way to retrieve a number of virtual machines in an org?

  Hi all, what is the most effective way to retrieve a MV of County in an org. I am currently recovering all CDV in an org, then all the vApps, then all of the virtual machines and pushing them into a table, then do a vms.length on the table filled by all virtual machines.

  It takes a horrible time, and there MUST be a better way.

  Open to any suggestion. Thank you

  Good, as administrator of the organization then: (I have not tried as a normal user account)

  var vdcs = new Array();
  var orgVMCount = 0;
  var vcdHost = org.getHost();
  
  var queryService = vcdHost.getQueryService();
  var expression = new VclExpression(VclQueryOrgVdcField.ORGNAME, org.name, VclExpressionType.EQUALS);
  var filter = new VclFilter(expression);
  var params = new VclQueryParams();
  params.setFilter(filter);
  
  var resultSet = queryService.queryRecords(VclQueryRecordType.ORGVDC,params);
  while (resultSet != null) {
  
      var records = resultSet.getRecords(new VclQueryResultOrgVdcRecord);
      for each (var record in records) {
          var vdcVMCount = getVdcVMCount(record.href, vcdHost);
          System.log("VDC "+record.name+" VM Count: "+vdcVMCount);
      }
      orgVMCount += vdcVMCount;
      resultSet = resultSet.getNextPage();
  }
  System.log("Total Organization VM Count: "+ orgVMCount);
  
  function getVdcVMCount(vdcHref, host){
      var vmCount = 0;
  
      var qs = host.getQueryService();
      var exp = new VclExpression(VclQueryVMField.VDC, vdcHref, VclExpressionType.EQUALS);
      var exp2 = new VclExpression(VclQueryVMField.ISVAPPTEMPLATE, false, VclExpressionType.EQUALS);
      var exps = new Array(exp,exp2);
  
      var expFilter = new VclFilter(exps,VclFilterType.AND);
      var queryParams = new VclQueryParams();
      var vmArray = new Array();
      queryParams.setFilter(expFilter);
      var rs = qs.queryRecords(VclQueryRecordType.VM,queryParams);
      while (rs != null){
          var vmRecords = rs.getRecords(new VclQueryResultVMRecord);
          vmCount += vmRecords.length;
          rs = rs.getNextPage();
      }
      return vmCount;
  }
  

  It takes a little more code because the ".ORG" field is not available for the non-Admin queryVMField, but the. VDC IS, so we start by retrieving the TDC for the Org, then for each one, ask the number of vm for VDC.

  Post edited by: Burke - had accidentally initialization of orgVMCount as new Array(); -changed second line to 'var orgVMCount = 0;

• Why move them to the bottom of empty in VMware Lab Manager when you use Firefox 4 +?

  When using Mozilla Firefox 4.0 or later, drop boxes in VMware Lab Manager are populated is more if it is not possible to deploy new virtual machines.

  It turns out that VMware has released a Lab Manager in August (4.0.4) update that resolves this problem. I upgraded to LM 4.0.4 and dropdown lists are now met again.

• How to turn off the most recent list used to term & other apps

  were if you search the registry problem disable MRU in all applications, especially the run command on the start menu, but I would like to eliminate all the other apps as well

  I found several solutions including one that mentions comdlg32, others who need to add fields to the register, any other fair value dword

  Is there a single solution or do I need a combination of solutions

  I didn't do this, but here I found at least 5 versions, one of which is correct & universal
  :
  1. [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Comdlg32]
  "NoFileMru" = DWORD: 00000001

  2.HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  Value name: NoRecentDocsMenu
  Value type: REG_DWORD
  Value data: 0 or 1
  0 = Yes, allow these recent docs
  1 = no, do not allow any recent docs

  Value name: ClearRecentDocsOnExit
  Value type: REG_DWORD
  Value data: 0 or 1
  0 = no does not clear
  1 = Yes, clearly their

  Value name: NoRecentDocsHistory
  Value type: REG_DWORD
  Value data: 0 or 1
  0 = historic Yes
  1 = no history

  3 turn off the history:
  Click Start--> Run--> type "regedit" in the Run dialog box.
  When in the registry, locate the following key:
  HKEY_CURRENT_USER > Software > Microsoft > Windows > CurrentVersion > Explorer > RunMRU.
  Right click on the RunMRU key and choose "Permissions."... ».
  Click on "Add..." ».
  Type "Everyone" and click OK in the box that opens.
  In the permissions (security) dialog box, select all and then deny read access.
  Click OK.
  Close the registry editor. You may need to restart your computer for the changes to take effect

  ' 4 ' most recently used ' list - how to disable file
  Previous

  The information in this article applies to:

  WinWay RESUME 9.0 and versions later

  Summary

  Like many other Windows applications, the menu 'File' of WinWay RESUME luxury offers easy access to read files recently. This article explains how to remove this list.
  More information

  Windows offers a system policy to disable the file 'most recently used' lists for applications in accordance with this particular policy standard.
  To turn off the "most recently used" list of files, download and run this file.
  To restore the list, download and run this file.

  Notes:

  This setting affects several applications, not only WinWay RESUME
  This setting applies only to the user currently logged on to the computer. You can repeat these steps for the other connections if necessary

  For advanced users

  The parameters above can be entered through the Publisher of the registry as well.

  Select Start, run, Reg Edit
  Navigate to this registry key:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  To disable the "recently used file list", adds the value:

  Name: NoRecentDocsHistory
  Type: DWORD
  Value: 1

  To activate the "recently used file list", right-click on the 'NoRecentDocsHistory' and select 'delete '.

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion \Policies\Comdlg32 key. 2. create a REG_DWORD value called NoFileMru and set the value to 1.

  5.
  Type regedit in the box RUN, and then press ENTER. It will open the registry editor.

  2. now go to following keys successively:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer
  HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

  In the right pane, look for a DWORD 'ClearRecentDocsOnExit '. Its value could be set to 1. Set its value to 0 or delete it completely.

  The recent documents menu can be disabled easily by editing the registry. To do this, go to the following key:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  Now in the right pane, create a new DWORD with the name: NoRecentDocsMenu and set its value to 1. Restart the browser to save the changes.
  You can also clear the RUN MRU history. All ads are stored in the key:
  HKEY_USERS\. Default\Software\Microsoft\Windows\CurrentVersion\Explorer\RunMRU
  You can remove individual entries or the entire list. To remove history to find inscriptions date on:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Doc find Spec MRU and delete.

• Hosts the naming - how to use VMware name instead of file name

  Please see attached file.

  All hosts based on the same models appear under the same name in hosts. Is it possible to configure vFoglight to extract the vCenter appoint to the host instead of using the file name of the VMware disk for guests of actual spending?

  You are looking in the wrong place in the object model.

  Machine virtual VMWare is an extension of the host object model.  Think of the host as the base model by the dealer and the virtual machine as the base model with all the bells and whistles added to make a street racer.

  If you enter a virtual machine name in the top search bar, you will see that the returned results include objects of different types, probably a Machine virtual VMWare and a host.  Select the virtual machine VMWare will take you to the model object VMWare-specific screens.  Similar results for HyperV, etc..

  There is always a host record for each virtual machine, just as each car factory has the model of base somewhere.  He just won't have all the bells and whistles.

  Looking at your attachment, I think that what you see on the dashboard can be what you see in Virtual Center.  Virtual machines have a name that appears on the list of the Virtual Center, which can be separated from the real name assigned to the VM inside the operating system.  If you fix the naming in VC, I think you will find that the correction automatically flows to vFoglight.

• Port sharing ethernet physycal between the Mavericks and Ubuntu using VMware Fusion

  Hi all

  I use VMware Fusion on Mac OS Mavericks 6.0.2, and I need to connect a physical device to manage using a Ubuntu 12.04 VM. In addition, the host computer is connected to a public network, using a Wi - Fi connection.

  I put the ip of the physical device by USB configuration, but I was unable to get by using ethernet or the guest or the host computer. I tried to configure the NIC of the NAT guest, as well as the bridge too. Nothing seems to work. I don't know if the virtual machine is able to handle the physical Ethernet port.

  Ideas for the configuration of the network device (NAT, bridget, etc.) or the ip configuration?

  Thank you very much in advance.

  Sorry, I left an important step.  You must also configure the host's Ethernet card to use a manual IP address in the same subnet assigned to the Virtual Machine and the sensor.

  1. connect sensor card via USB and set the IP address and subnet mask, disconnect USB.

  2. connect the sensor to the host (Mac) Port Ethernet card.

  3. in the Apple menu > Preferences system... > network > Ethernet > configure IPv4: manually, then set the IP address: and the subnet mask: properly.

  4. from the Virtual Machine settings > network adapter > Bridged Networking > Ethernet

  5. in the guest OS virtual machine to set manually the appropriate IP address and subnet mask.

  Example:

  The IP address of the host on the Ethernet adapter: 192.168.3.1 subnet mask: 255.255.255.0

  Guest OS Ethernet adapter IP address: 192.168.3.2, subnet mask: 255.255.255.0

  Sensor onboard IP address of the Ethernet card: 192.168.3.3, subnet mask: 255.255.255.0

  In this example, the sensor Council will be addressable by the host or the guest to 192.168.3.3.

  BTW I just tested it using my Thunderbolt Display Ethernet with a normal cable (straight not crossed) RJ45 connected directly to a device addressable IP, VMware Fusion and a virtual Windows machine.  Although the same works with an Ubuntu VM as I have in the past also.

  This should work without any problem but make sure that the firewall or other security software on the host and guest are not blocking communications!

• The application effect Alpha using advanced Actions

  Hi all

  I'll explain what I'm trying to reach the first (I'm using Captivate 5)

  I have a wheel of food which is cut into portions (carbohydrates, proteins, produced slag etc.). Each part is actually a button ("party") which, once clicked evokes a text caption popup with some information with another ("narrow") button that will close the popup text caption.

  When the student clicks on the button 'part' I would also the context in which fade out, then when the user clicks on the button "Close", the context in which fade in the new.

  Using advanced actions, I see that I can apply an effect to all the objects in my background, so I'm trying to change all alphas to 20% when you click on the button 'part', then when you click on the "close" button back to 100% alpha values.

  However it seems that when the effect is applied (after clicking on the button ' Party'), it works on a timeline in which I can't seem to control and after a few seconds the effect returns return of 20% to 100% on its own.

  Is there a way I can apply the effect so that the alpha remains at 20% until I say otherwise?

  Would really appreciate anyones help with this. Thanks in advance

  Rick

  Hello

  Simple Simon here. Instead of futzing about with all the alphas on everything, why not just insert an object to display that covers everything? Set up black as the color and the alpha on that value. Then turn it or disable using advanced Actions.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• The most effective slideshow

  Hello

  Can I make a slideshow by importing 30 or if the images and the use of the timeline.

  I can do a slideshow in important 30 or if the images and the use of actionscript so that the timeline is relatively short.

  What is the best way?  I discovered how do by loading a movieclip with the image, but it's risky, because according to the connection, it loads sometimes too late.

  What is the way more streamlined, smaller to make a long slide show?  Can you tell me of messages that talk about this or tutorials?

  Thank you

  Stan

  'better' is subject to personal opinion.  But how to get the smaller file size is to load all images using actionscript and create all the transitions in actionscript using a 1 frame swf file.

• The most effective use of models DW?

  Hello world!

  I think on the use of several models to compose a complete page. Does this make sense?

  For example, the header/navigation in a model and another model of a column two lay out, then another for a column of three

  Instead of having the different sections of a page in the templates, just create three pages of complete separate models?

  Maybe I'm overthinking the use of models.

  It is just a way to add editable regions, or should I put pages and templates like the sections of a page?

  Thanks for your help!

  Ty

  It works either way.  You have an editable area available in the page's head that can accommodate either an embedded style sheet, or a link to an external.  The necessary CSS just for passage from 2 to 3 columns is so small, although I tend to integrate...

• The most effective way to put an internal radius to a border using edge animate.

  Hi all..

  I'm looking for a little help in the resolution of this one...

  If we were to create a rectangle and make this transparent rectangle, then assign a color to the border, then do tell... 3px we'd see a nice rectangle with rounded corners.

  But... How can I add an inner radius to my border...

  If I were coding CSS I would like to do the following, but I would like to know the edge way to do

  Thanks much as always!

  If I were in the css:

  #container {
      float: left;
      border-radius: 3px;
      background-color: #383838;
      width: 174px;
      height: 174px;
  }
  #container:before {
      border-radius: 3px;
      border: 2px solid #383838;;
      content: '';
      width: 170px;
      height: 170px;
      position: absolute;
  

  You can set as shown in the screenshot attached:

  

  HTH,

  Vivekuma