The architecture used in core 3 help
I would use the architecture of the LabVIEW core 3 for a project module. I made a few changes on it and I am unable to stop when I pull down the 'File' in the top left corner and click on "Exit". I tried setting up probes and walking in the code, but I still can't see the problem.
In the lower loop there is a case called "Select 1". If I get rid of the code in this loop, the application stops as expected.
Any help is appreciated. To run everything simply unzip, open the project and launch "Main_1.0.
Thank you
Chuck M.
Found. Look in your Initialize.vi. You will find a display Module sends the Select1 control. But the data is a Variant. A variant of flooding. This cannot be converted to digital. Therefore, an error is thrown, the queue will never be read again, and you'll have an infinate loop.
You just need to wire a value converted to a variant in the data here.
Tags: NI Software
Similar Questions
-
As suggested by Firefox, I've cleared my history and cache. Also, I downloaded and run one of the programs malicious applications recommended Firefox. I also deleted Firefox my firewall and then added it back as suggested by Firefox. I have no problem accessing the site using Internet Explorer.
HTTPS Everywhere makes it easy for you to move site to a secure connection. It's something that you can yourself on the sites where you are displaying sensitive information, so it automates this for you, but I think that it is not essential.
If you love the comfort, the extension has a function to create your own rules, as described on https://www.eff.org/https-everywhere/rulesets. It sounds a little complicated...
-
Cannot open a form and read the document using ACROBAT DC - need help ASAP!
Hello
I tried to open a document from the Embassy of the Canada and after that, I open it shows (see the picture below). I click on the link given to upgrade the software adobe reader but invites that I have already installed the program already. Help, please! I thank very you much for your kind cooperation.
Hi carlat51081980,
Right click on the given link & choose "save link as", save the PDF on your desktop & now try opening the PDF downloaded using player application.
Let me know if you are still having a problem.
Kind regards
Nicos -
The Horizontal alignment of the table using DW4 and css help.
It works in Internet Explorer, but not FireFox.
The Web site is http://www.airrepaircarolina.com/
The CSS code is below...
* {margin: 0;} Padding: 0 ;}
. {BoldBody}
do-family: "Times New Roman", Times, serif;
do-size: 18px;
make-weight: bold;
Color: #000;
}
{#table1}
background-color: #FFF;
letter-spacing: normal;
text-align: left;
vertical-align: top;
horizontal-align: center;
Word-spacing: normal;
white-space: normal;
border-top-style: none;
border-right-style: none;
border-bottom-style: none;
border-left-style: none;
top: auto;
position: fixed;
}
. {To header
do-family: "Times New Roman", Times, serif;
font size: 24 PX.
make-weight: bold;
color: #0E76BD;
}
. {BodyCopy}
do-family: "Times New Roman", Times, serif;
do-size: 18px;
make-weight: normal;
Color: #000;
}
. LinkText}
do-family: Arial, Helvetica, without serif.
do-size: 14px;
make-weight: normal;
color: #FFF;
}
LannBarr wrote:
What should I put in where you have the double asterisk * with width, it is centered *
Nothing. It's just an explanatory note (or comment) in the CSS syntax.
/ * This is a CSS comment * /.
-
Access to the site using Dreamweaver CS3-Please help
I have a link in a page that links in a pdf file / or the someone site. Is it possible to have a box pop up asking to return the our original site? Please see my example at http://www.quickflash.com/boilersgas.html. If you click on one of the photos, it will take you to another site. I want to make it easy for them to return to our original site instead of hit the arrow to the left.
Thank you!
Heather
Add whats in red into your link. This will open the link in a new window and the user will never have to navigate away from your page http://www.buderus.net/OurProducts/GasFiredBoilers/G234X/ProductSpecifications/tabid/134/Default.aspx" target="_blank">
-
Hello
I'm trying to implement the AIA error handling and reading that AIA provides xpath functions to retrieve the error code messages and corrective action messages. the documentation says that you must use the oracle.apps.aia.core.eh.i18n.EHCorrectiveActionRB listresourcebundle class to do this.
My questions are:
1. this oracle.apps.aia.core.eh.i18n.EHCorrectiveActionRB of the class already exists within the AIA in order to add the new error etc... you just need to change?
2. If the above is true then where can I find this class to add new messages?
3 this Listresource bundle must be implemented in all composite samples of AIA? If yes how can I do this?
3. does anyone have examples that I can use to implement the management of errors?
4. all other general advice on the use of this list of resources group
Thank you for your help in advance.
Kind regards.
Adrian1. this oracle.apps.aia.core.eh.i18n.EHCorrectiveActionRB of the class already exists within the AIA in order to add the new error etc... you just need to change?
Yes, they exist oob with FP. In 10g, it will be under system/classes/bpel file.
2. If the above is true then where can I find this class to add new messages?
In 10g, it will be under system/classes/bpel file. 11 g, it will be under/soa/modules/oracle.soa.ext_11.1.1/classes folder.
3 this Listresource bundle must be implemented in all composite samples of AIA? If yes how can I do this?
No, the bundle is a single resource, and you can add your messages in the same class.
3. does anyone have examples that I can use to implement the management of errors?
Please see available in OTN download AIADemo. All composite materials have the error handling.
4. all other general advice on the use of this list of resources group
11 g class of resource bundles is replaced by a file of text properties. -
Need help to connect my ibook G3 to the Internet using Airport
Hello
I recently bought an Ibook G3 and unable to connect to the internet using Airport. I can find my internet provider and it allows me to enter the password for it, but after I have get the same message:
"An error has occurred all trying to join the selected airport network. -3151.
the password is correct, so I don't know why its not connecting.
I checked the map, and everything seems OK.the Ibook is a Mac OS 9.2
version Mac OSZ1 - 9.2.2
Help, please! -J' I feel like IM going crazy trying to get it to work
.
Older hardware uses a different protocol and the later models of wi - fi security, so
It may be that the unit is able to see the signal available but not able to use it or connect.
In order to set up an AirPort Base Station wireless vintage separate from any modern
wireless local area network is a way to use a less secure configuration wireless computer older
and without compromising the latest systems which would share a reduced security wireless
If you want to reduce the overall security of the system (using the old protocol WAP,
WEP, etc.; drafters WPA2 +) and base stations can be more difficult if they
also have more than one type of signal. Older computers use less bandwidth.
At this point, I cannot possibly be a great help; short of reading thanks to my favorites
old pages (and check if the pages still work online) reference to use the installation program.
My setup wireless WPA2 but earlier use AirPort Express base; and also have older
base station AirPort Extreme 54 k White orb on-site; but not currently enabled.
To have an additional wireless hardware for use with vintage computers.
Good luck in this case!
-
Friday at 530, we were able to get on the internet using Firefox. 21:00 we received a message "Unable to load page" but were able to go to Internet Explorer and get online. HELP I want MY FIREFOX to come back!
See this support article - difficulty of problems connecting to websites after Firefox update
-
my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?
My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.
-
Phone numbers contained in the e-mails and the web links will appear for a few seconds and then disappear. I use Yahoo mail, however, if I use IE 8, with Yahoo mail, the problem does not occur. Help!
This has happened
Each time Firefox opened
Is whenever I use Firefox
Tools > Addons > > Extensions
You have the Skype for Firefox extension?
If so, disable it. Known to cause this problem for many users. -
If please, I m using a Logic Pro 9 and are looking for the key "Advanced" (tools) but doesn't seem to do not for me in the 'preferences'. ". Why? Help!
Because there is no mode "Advanced Tool' to Logic 9.
Logic 9 is always and only has an advanced mode, there is no other method.
Advanced tools (and their duty to be checked) was a ridiculous logic X when it was released.
-
I can collect data from a hygrometer in a text file using the RS232 port with the following T75.2F:H17.0% format, these data are collected using a data logger software. I was wondering if I can collect this data for later analysis using Dasylab. Any help is appreciated.
The setting below causes the error. Change for the second selection, output values of all channels.
-
I allowed a neighbor to 'Piggy Back', my access to the internet, giving them my password. They took advantage of this facility, and I crossed my
GB account. They refuse to pay for the excess. How can I delete and forbid them to use my WiFi? Help please. John in Didim, Turkey...
[Moved from comments]
Hi John,.
Unfortunately, it seems that your neighbors have taken advantage of your kindness.As well as the suggestion of Sanwin2 to change the wireless password, you must also change the password to your console to access router (usually accessed via the IP address in the address bar of the browser). Just do it if the Access console password was the same as your Wi - Fi connection, or by default. Please note that this is ONLY if you have a router to access the internet.You can contact your router manufacturer and ask how you can prevent access. Usually, you can set your router it allows only the connection from certain IP addresses that you specify. In this way the neighbors won't be able to connect at all. It would be almost impossible unless experts pirate networks.You can also contact your nearest branch. As they are piggybacking without your permission, she (I assume) may be classified as theft. Although I'm not 100% sure and the laws may be different in your area, you can call the non-emergency number and report your neighbor.Of course, have you tried to go above and asking them to stop using your connection?-Jet -
I am new to the ethernet communication using labview. I don't have any material. I have two laptop, I need to send and receive data through these 2 portable by using labview. Kindly help me on this.
Dennis has already said: for a direct PC - PC connection, you need a cross over cable. If you connect through a router or a switch, you use a standard cable.
-
Hi, I reinstalled vista windows several times on my pc during the past three years, but now he he isaying my activation key is already in use. Can anyone help please
Use the phone activation, do not meet all the prompts until the opportunity to talk to a real person
Maybe you are looking for
-
Impossible to update 12.4.1
I tried to upgrade to 12.4.0.119 12.4.1 days now without success. I tried to do it from the App Store, as well as through upgrade of iTunes itself. All the ideas/guides/help appreciated please!
-
He can not find the sound controls for Satellite A80?
Hi, Im a very recent user of a satellite A80, it only 4 days, I played a cd and could not find a graphic equalizer or sound. I enter the area of assistance to Toshiba, but it would not allow me to change the bass and treble, can someone help me with
-
EliteBook 8440p: lack of drivers for the Ricoh Bay8Controller and Base system device
Hello In the Device Manager my EliteBook, under the heading other devices, I have the 2 below devices for which no driver is installed. What are and how to upgrade drivers (Windows cannot find drivers)? - Device base system with hardware ID: PCI VEN_
-
How can I prevent my vi 'Write the JPEG' printing on my default printer?
I use this VI to create a JPEG of my front, but both always creates the JPEG image as it is supposed to AND it prints on my printer by default. Does anyone else have this problem? Is there a solution? Is there another way to create JPEG files? I
-
Photosmart D5460 driver for win 7 64 bit moved
Photosmart D5460 driver for win 7 64 bit moved