The balance of time

Similar Questions

• Property at the time of the balance and the formula of Member - dimension account

  Hello

  We have a member account including the Balance of time as 'Average' property and she member formula. When I pulled Q1 or CDA data in the report, is to show the average value of TB. But my requirement is to show the calculated value of the formula be insteaded of value avearge TB for this member of the account.

  Please let me know how I can accomplish this requirement

  Thanks in advance for your help.

  in the interface of planning go into the beam and pass the value of the average flow

• NB550D - battery icon does not always reflect the right balance of time

  I recently bought a NB550D and I must say that, first of all, I am very happy with it. It tends to be a bit slow, but I can live with that.

  However, my problem is that the battery icon may not always reflect the right balance of time. After a full charge, it can present 9 remaining hours but after a stop and restart it will be may show 75% and the remaining 3 hours. If I stop and restart it can show 75% and remaining 6 hours

  When I started the unit I enabled him to discharge completely (by means of) three times, as suggested by the seller in the store, but quite frankly it seems not a fall of difference!

  Any advice will be appreciated.

  Concerning

  Hello

  Like Tom, battery depands of working time on the use of the laptop.
  Battery time can always change.

  In addition, I would recommend calibrating the battery to ensure best performance.
  You must charge the battery until the led would turn to green (blue) and should unload completely the battery until the cell stops automatically.
  This process must be repeated several times.

• property at the time of the balance

  Hello
  
  with the property balance at the account, what is the difference between the flow rate and the average. In planning, I understand them as one and the same.
  
  Need help and information.
  
  Thank you

  Hello
  If you talk about the balance of the time of the planning application. Then we use this in the context of spread.
  There is a difference between FLOW and AVERAGE defintie.

  In simple terms, with FLOW, the parent is the sum of its children
  Average, it is the average of children. You will find the clear explanation in the planning documentation too.
  If stick you to this rule and refer to the doc of planning, I am sure, you will be able to know the difference.

  Referring to the documents is important, before you question.

  Sandeep Reddy, Enti
  HCC
  http://analytiks.blogspot.com

• Lack of access to the balance of audio volume control

  The balance function is 'available', but now hidden in Windows 7. Is it possible to use a script or macro to quickly access the balance control? W7 the access sequence for me is 1) Windows task bar (click to view)--> Start (button)--> Control Panel (list)--> material & audio (hyperlink)--> system (hyperlink) change sounds--> reading (tab)--> helmet (icon)--> properties (button)--> levels (tab)--> Balance (button)--> press '1' (scroll bar) and the key '2' (scroll bar)!

  A previous post, "can not balance sound in Windows 7", addressed to this situation with a label that showed more frustration a question. The response was useless for recommended action reduces the string above: click right volume (icon)--> (list) of sounds--> reading (tab)--> helmet (icon)--> properties (button)--> levels (tab)--> Balance (button)--> press '1' (scroll bar) and the key '2' (scroll bar)!

  My comments are: 1) I could not designed access more complicated if I had a degree in software development. 2) what's up with "Key 1" and "key 2"? People have a left ear and right ear. (3) I read that more than 10% of the American population live with hearing loss. The loss is not symmetrical. A balance of ready-access control is an important element.

  Please consider to improve this feature.

  Hello
   
  Can you tell us if there is a volume icon in the system tray, if not then please follow these steps below to activate the volume icon in the system tray.
   
  1 right click in the taskbar near the time display and you'll get a context menu.
  2. click on properties.
  3. under the system always icons display, check the volume.
  4. click on apply.
   
  Also note the way the quickest way to change the volume of your computer speakers is to click the speakers button in the notification area of the taskbar
  Right-click on the "speaker" icon and select the open volume mixer.

  1. on the speaker, once you get the properties of speaker.
  2. Select the levels tab.
  3. here, depending on the output device, you can goahead and balance the left and right output device.
  4. it's only the easiest to access the balance of volume.
   
  If you want to suggest changes in the design here is the link you can make reference to: Microsoft Connect - back products and bug reports. Microsoft...
  https://connect.Microsoft.com/dashboard/Info/

  Thank you, and in what concerns:

  I. Suuresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• New feature request: white printing setting the balance in the print Module?

  At the present time, the print Module has adjustments to compensate for the brightness and contrast prints. It would be very useful to also add the White Balance, because usually screens are calibrated to another white point and prints are warmer.

  Thank you

  If everything is calibrated right you shouldn't need the brightness sliders, contrast, or the Balance of whites in the print Module.  They are just hacks.

• HFM Consolidation of the balance sheets of the EBS GL

  Hello

  I'm consolidating an applicaton of HFM, I created my account dimension based on the balance sheet of GL accounts, I mean that the account type is done on GL.GL_CODE_COMBINATIONS. ACCOUNT_TYPE,

  I generated a text file based on the sql query, the first time I loaded the balance without any validation of the account and I realized that HFM change the sign for expenses account, so I change the sign for accounts DECODE (GL.GL_CODE_COMBINATIONS. ACCOUNT_TYPE, 'A',-1, 'E',-1, 'L', 1, 'o', 1, 'R', 1) when I generate the text file, but in peacebuilding, I noticed that expense accounts has not changed the sign. My questions are, what is just way to load in HFM? HFM change the sign and what kind of accounts?

  Concerning

  Hello

  The answers to your questions are quite complex.

  First of all, about the right way to load in HFM, you should find the answer by asking your customers. HFM should be aligned with business processes, and that means that the right way is defined by the company.

  Secondly, regarding the HFM change sign and what kind of accounts, I suggest to read pages 75 to 80 of the PDF document

  Post specific questions.

  Kind regards

  Thanos

  < spam="" signature="" link="" removed="" by="" moderator="">

• Image text wrapping negatively affects the balanced paragraphs - need help

  I have CS5 - 5.  I'm no expert, but I am using the program for a number of years in the design of flyers, brochures, posters and short brochures. Now I'm on my first magazine and I thought that all the features balanced new paragraph would work a breeze - it didn't! So, I have a page of A4 size with a block of text in two columns that fills (have also the text flows on the next page if it's relevant). The text is 10pt with a line spacing of 12 pt. Everything is good so far. I used paragraphs balanced in a first time to have the two columns of text aligning horizontally. Seemed fine. However, as soon as I drop an image into the mix, the width of a column (lower left corner of the page), simple text wrapping, text changed less satisfactorily. Text above won't come down to meet the upper part of the image, no matter what I put in measures to wrap text or what kind of film I use. Also the text to the right of the image is more down to the bottom of the text block. The problem is further compounded when I integrate a quote as a separate object.

  Then I disabled the balanced paragraphs feature and used a grid of base line instead, taking up many of the suggestionson another discussion and also using advice elsewhere on the net. Useful in a sense that it helped me to learn more about what baseline grid but I am still with my problem.

  I could be wrong, but I don't think that I ask the program to do anything complicated. It's not as if the text should wrap around the object. I know that I could get the effect I want to using single column text blocks and get text to flow from one to the other, but it is certainly not how it should be? If you like I can send screenshots, but I'm not sure it would help. I write this in the morning in England so I know that many of you will still be sleeping. However, once you have had your first cup of coffee of the day, maybe you could give me a little help? Needless to say that any advice that anyone could offer would be warmly accepted.

  Best wishes to all,

  John

  If I had to guess, by looking at your screenshots, I would say that you have a possibility to keep in your style on the last two lines of the paragraphs together and that there is not enough space to the bottoom of the image for more than two lines, but you do not have we shown the contours of the block.

• The balance - general question

  Hello
  
  This is the first time I use the State of the balance (to compare with a discoverer report which was built for another purpose).
  
  If I use a trial balance for the end of May and an account was a payment in June, while the account does not appear in the report.
  
  The user feels that it really should.
  
  Can someone explain to me the purpose of the trial balance, i.e. If the report is expected to show the balance of the account due invoices or any Bill which is not fully paid?
  
  Thank you.
  Leah

  Hello.

  And the difference with the (s) in the distribution pipes?
  The head of the invoice, click Tools/accounting view. Look at the type of line responsibility and see what is the date of posting. This is the date to consider whether the Bill should appear or not on accounts payable Trial Balance (if it has not yet been paid).

  Octavio

• I can't access the backups on Time Capsule

  A month ago I deleted from my hard drive and more. I have a MacBook Pro 2012 running macOS. I can't access the files on Time Capsule before is erased in the month of August, I can see the story in the timeline panel, but I don't have access to anything before erasure. Is it possible to access to the files before the wipe?

  A month ago I deleted from my hard drive and more.

  What hard drive you are talking about: one internal on your MacBook Pro (MBP), an external drive attached to the MBP for Time Machine backups, or internal hard drive to time Capsule?

• iPhone cannot connect to the Internet via time capsule

  I have a current execution capsule 7.7.7 time. IPhones in my house can't get internet service when it is connected to the time capsule. My iPad, I tap on it now, can get internet time capsule service. My Mac can connect. I restarted the capsule of time with my modem cable many times. My passwords are correct.

  I also have a smart Vizio TV that does not connect to the Internet. This is true with wifi and also with a wired connection to the time capsule.

  I don't know what the cause of the problem. Any help will be appreciated.

  He has worked in the past and now could not or never worked?

  Apple routers can sometimes decide autonomously switch to bridge mode. If your cable modem is not a router, you MUST have the apple router... TC in your case DHCP and NAT mode.

  If you have not done before you reset the TC at the factory and re-do the installation. Here are my recommendations.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  Then redo the configuration of the computer that you want to use for TM using Airport utility.

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the wireless is still an issue defined wireless names like TC24ghz and assigned the 5 GHz other name... eg.TC5ghz.

  Finally, use fixed channels in 2.4 ghz... try 11, 9 and 6, in that order.

  (leave the security for a few minutes and see if that makes a difference).

  For iphone and TV with problems in your Setup program ensure that the TC is NAT and DHCP... try to use a different such as google public DNS 8.8.8.8 and 8.8.4.4

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  ** 3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC.

  Ignore this point if you don't understand it... after the return if you drop questions.

  4. be sure that IPv6 is set correctly in the computer. IE link-local only for ethernet or wireless depending on whether you are using. Car is not good enough.

  Tell us which modem cable, you have, make and model please?

  The TC has problems with some popular brands... one of the SB series a modem port is malfunctioning.

• Can I change the date and time on my account?

  Is there anywhere on this site where I can set the details of the date and time?

  When I posted a recent issue, the date and time were incorrect IE not my country date & time.

  Thank you

  Sylvia

  PS Sorry if this is the wrong place to post this question, not that the possibilities of passage are really there?

  The date and time are universally on us Pacific time zone. You can't change it.

• How long does take to set up the date and time

  How long does take to set up the date and time

  Less than a minute.

  Settings > general > time zone > set automatically

  If this does not work, try the help in this support article > If your Apple TV will stop to display date and time on startup - Apple Support

• Lets say I got a $10 gift card balance and I want to buy something will be only charged debit card 10 cause of $20 s $ of the balance of the gift card?

  Lets say I got a $10 gift card balance and I want to buy something will be only charged debit card 10 cause of $20 s $ of the balance of the gift card?

  Unless it's a gift card or otherwise indicated, the debit card will be charged $10 plus tax on this item.

  (143858)

• I have a folder of files in local folders that keeps reappearing after that I erase it. I tried to fix the folder several times. Any suggestions?

  I have a folder of files in local folders that keeps reappearing after that I erase it. I tried to fix the folder several times. Any suggestions?

  This is the name of a folder? Who will be in a file name in your file system. Given his situation, is it possible or likely that the total path length exceeds the limit of the operating system?

  For example: http://windows.microsoft.com/en-gb/windows/file-names-extensions-faq#1TC=windows-7

  This is not to talk about any other limit which may be inherent in the way that Thunderbird uses names of files internally.

  In your position, I explore the Thunderbird profile and check paths, as they appear in the file manager. You should be able to remove all folders that are unwanted here also.