The BIOS version number and date on the Pro 6

Similar Questions

• Determine the version number and compilation of VMwareTools for VMware Workstation 7.0.1 build 227600

  I installed VMware Workstation 7.0.1 build 227600 on a Windows 7 64-bit machine.  Update the VMware Tools using the compiler, one of the instructions is:

  CP /mnt/cdrom/VMwareTools-x.x.x-xxxx.tar.gz /tmp/

  How can I determine the values of x in this case? When I tried the following command:

  CP /mnt/cdrom/VMwareTools-7.0.1-227600.tar.gz /tmp/

  I received the following error message:

  CP: cannot start ' / mnt/cdrom/VMwareTools-7.0.1-227600.tar.gz':

  No such file or directory

  The GuestOS I tried to run is:

  Release of centOS 5.2 (Final)

  I always use AutoComplete with tab to get the name of the file.

  Type:

  CP/mnt/cdrom/VM, and then press your tab key. He must complete the rest automatically.

  Then complete the order with the part of tmp folder location.

  Rick Blythe

  Social media specialist

  VMware Inc.

  http://Twitter.com/vmwarecares

  http://Twitter.com/vmwarekb

• number and date of type storage and null values

  Hi, I read that the date type consumes 7 bytes on the disc when it is preserved.

  It is also true for the value null in date type or the space for a null value in the column of type date is then reduced and equal to 1 byte?

  What about nulls (x) number?

  How can I check to make sure?

  Thank you

  Columns of NULL values using either no space (if they are physically at the end of the line), or 1 byte if not.

• Version number and multicast

  Hi all:
  
  As far as I KNOW, the group address and port of a cluster are associated with the version of coherence. For example, to treat 224.3.6.0 =, port = 36000 implies that the NVA is 3.6.0.
  
  Now, my question is, if we have two nodes of consistency from different subnets, but with the same version of consistency, they will be in the same cluster?
  
  Also, do we have to create our own alternative xml descriptor to define the custom multicast address / port?
  
  Thank you
  Johnny

  Hi Johnny,.

  Johnny_hunter wrote:
  Hi all:

  As far as I KNOW, the group address and port of a cluster are associated with the version of coherence. For example, to treat 224.3.6.0 =, port = 36000 implies that the NVA is 3.6.0.

  No, the group address and port of a cluster has nothing to do with the version of coherence. But, by default, the Oracle coherence followed this convention. You can keep any port available multicast and address to your cluster using the override or - Dtangosol.coherence.clusteraddress and - Dtangosol.coherence.clusterport of the system properties file.

  >

  Now, my question is, if we have two nodes of consistency from different subnets, but with the same version of consistency, they will be in the same cluster?

  It is not recommended to cross a bunch of consistency across subnets because of the possibility of failure of the connection between subnets and the data flow limited by the speed of link members. But with the right value-Dtangosol.coherence.ttl, you can do a cluster unique consistency on subnets. Generally, a value of 4 will allow consistency to the subnet of your nodes to form a single cluster.

  Also, do we have to create our own alternative xml descriptor to define the custom multicast address / port?

  Answered above
  >

  Thank you
  Johnny

  I hope this helps!

  See you soon,.
  NJ

• WPS54GU2 version number and power supply?

  I have three units of WPS54GU2.  We have a supply of 12 V DC, the other a 5 VDC power supply.  The other lost his DC power.  I don't know what supply goes with what unit.

  How can I find on what versions of WPS54GU2, I (version 1 or 2?) and the tensions they expect? 5 v or 12 V?

  There is only one version available. Power specifications are 12V / 1A

• Version number and compilation of host ESX with PowerCLI - export problem

  Hello all,.

  I tried to run a PowerCli command which translates in the version host etc...

  Normally, I can use the export to a file .csv with NoTypeInformation - line, but it does not work and errors with the following text:

  Unexpected token 'Export to Csv' in expression or statement.

  Online: 2 char: 11

  + Export-Csv < < < < "c:\GDC_HostsVer.csv" - NoTypeInformation

  + CategoryInfo: ParserError: (Export - Csv:String)], ParentConta

  insErrorRecordException

  + FullyQualifiedErrorId: UnexpectedToken

  If anyone can help as to why the following does not export the results, but runs when I do not use the Export-CSV command?

  Notice-EEG - ViewType HostSystem-Name, property Config.Product | foreach {$_.} Name, $_. Config.Product | `
  Export-Csv "c:\%name%.csv" - NoTypeInformation

  Thank you very much!

  Try this

  get-view -ViewType HostSystem -Property Name,Config.Product |
  %{$_.Config.Product} | Export-Csv "c:\report.csv" -NoTypeInformation
  

• Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds?

  Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds? Now whenever I update my software I need to change the global variable where I store the version number, and then when I build I have in hand, open the properties and change the version number for the executable file and the installer. Is there an easy way to make these as all corresponding automatically?

  Have you tried a search? This question comes up a LOT. Here are the results of a search: http://forums.ni.com/t5/forums/searchpage/tab/message?location=Node%3A170&q=application+version#mess...

• who can tell me the most recent version number of the Client vSphere and vCenter.

  who can tell me the latest version number of vShpere customer and vCenter?

  The previous issue are the latest version (4.0U1).

  A way of knowing the last build number (for a version of Ux) is to check the download site (in the Download details):

  http://downloads.VMware.com/d/info/datacenter_downloads/vmware_vsphere_4/4

  For works build and see also version number:

  Version number and compile ESX

  André

• Retrieves the version number of bar - descriptor.xml programmatically

  Is there a way to extract a version number, and other information of bar - descriptor.xml file similar to how's done it in the Android world via getPackageInfo() in PackageManager?

  It would be a convenient way to play around these values in your code.

  Thank you

  There are various APIs of the platform that you can use for example the PackageInfo

  http://developer.BlackBerry.com/Cascades/reference/bb__packageinfo.html

  ApplicationInfo or,

  http://developer.BlackBerry.com/Cascades/reference/bb__applicationinfo.html

• Problems of submission APK to GooglePlay store - Version number

  I get an error when you submit an app for the GooglePlay store.

  He returned: Version code must be greater than 1234

  In the dashboard, I value number version 2.0.0.2

  Can someone tell me what setting needs to be changed to allow GooglePlan to accept my application?

  Thank you!

  It seems that the existing version of the application is set to 1234. When you build the Android application, replace the version number and make greater than 1234 manually version code.

  

  Then download the app, sign and submit the game to Google and it should pass.

• How to display the version number of the application and the date of the last

  At the Express request User Guide under the heading "Application définition Attribute" description for the Version is as follows:
  
  Version includes the version number of the application on a page. You can also automatically link the version at the time of last modification by using the following format masks:
  
  YYYY. MR. DD
  
  MM DD. AAAA
  
  DD. MM. YYYY
  
  I have attempted to use various forms of alternative channels to display this information on a page without success, here are some of the things I've tried:
  and VERSION.
  and version.
  & APP_Version.
  
  And how would you present and the version number for the date of last modification date?
  
  Thanks for any help
  Ben

  The substitution of the #APP_VERSION model # seems to only be supported in Page header and footer definitions, not the body. (There are a number of restrictions where work substitutions, which are not well documented).

• How do I know the hardware version WRT54G to only the firmware version and date

  Hi - on a Linksys WRT54G, serial numbers and the version number have
  been worn except in the case of the unit, so I don't know what version it is. He has since been released in it's 'safe place' to which I don't have physical access (and yet they want me to admin it). Don't think that I even get cable connect, wireless only. Gee. In any case... of the configuration screens I see:

  The current version of the firmware is 1.00.6 January 20, 2006.
  I could, I guess that to get the MAC address

  The default login and password are what is active.

  Can you tell what version of the material is, so that I can download the
  good firmware flash update?
  Thank you

  The best way is to check the hardware, but as you mentioned, it is not an option. I suggest that you check each firmware release notes, check the previous firmware versions and dates on each version of the output material. However, it may be tedious.

• The file wmploc.dll has a version number of 11.0.6002.18065 where 11.0.6001.18111 was expected. Windows Media Player is not installed correctly and must be reinstalled.

  Original title: MP3 Association.

  Hello

  Hello

  I have 64 Ultimate, I had a problem with the version number of WMPLOC. DLL, see the attachment. I run Kaspersky AV completely up to date.
  There is a lot of info on the net and none have worked in this newsgroup on how to fix this error however.

  I tried to change the version of the file with resource hacker and I tried all the dos commands to save the version of the file, but it worked only partially.

  I to WMP do not have access to the list of start/programs, don't y at - it programs in one and the list of features "Turn Windows features on or off", my desktop shortcut has been for version 32 bit and who made the error, as did double click an MP3 file.

  I have 32 and 64 bit versions of WMP on my PC, I created a shortcut on the desktop for the 64 bit version and it works however I can't associate MP3s with the 64-bit version, dialogue 'Open with' reverts to the 32-bit version (and I get the error) even if I chose the wmplayer.exe in 64-bit file , I tried to rename the folder WMP 32 bit for windows does not find the exe file in this folder and it uses just Quicktime for the association.

  Y at - it a fix for this problem of association?

  Thank you

  Daniel

  I guess you need go to the 64-bit version of Internet Explorer as well for this. There should be a shortcut to this version in the Menu start - all programs. Tim Baets
  http://www.BM-productions.TK

• Partitioning the table - range on data type (21, 7) number and varchar2

  Hello

  Database version:

  DB: Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  Operating system: HP - UX nduhi18 B.11.31 U ia64 1022072414 unlimited-license user

  APP: SAP - ERP

  I have to the partition of the RANGE on UPDATED_ON or PROFILE is a table that has a structure below:

  Name Null?    Type

  -------------------- -------- --------------

  ------------------

  MANDT NOT NULL VARCHAR2 (9)

  MR_ID NOT NULL VARCHAR2 (60)

  PROFILE NON-NULL VARCHAR2 (54)

  NO_REGISTRE NOT NULL VARCHAR2 (30)

  INTERVAL_DATE NOT NULL VARCHAR2 (24)

  AGGR_CONSUMPTION NOT NULL NUMBER (21.6)

  MDM_VERS_NO NOT NULL VARCHAR2 (9)

  MDP_UPDATE_DATE NOT NULL VARCHAR2 (24)

  MDP_UPDATE_TIME NOT NULL VARCHAR2 (18)

  NMI_CONFIG NOT NULL VARCHAR2 (120)

  NMI_CONFIG_FLAG NOT NULL VARCHAR2 (3)

  MDM_DATA_STRM_ID NOT NULL VARCHAR2 (6)

  NSRD NOT NULL VARCHAR2 (24)

  REASON_CODE NOT NULL VARCHAR2 (9)

  QUALITY_FLAG NOT NULL VARCHAR2 (3)

  METHOD_FLAG NOT NULL VARCHAR2 (6)

  MSATS_UPDATE_DAT NOT NULL VARCHAR2 (24)

  MSATS_UPDATE_TIM NOT NULL VARCHAR2 (18)

  READ_STATUS NOT NULL VARCHAR2 (3)

  LEGACY_FLAG NOT NULL VARCHAR2 (3)

  CREATED_ON NOT NULL NUMBER (21.7)

  CREATED_BY NOT NULL VARCHAR2 (36)

  UPDATED_ON NOT NULL NUMBER (21.7)

  UPDATED_BY NOT NULL VARCHAR2 (36)

  CVERSNO NOT NULL VARCHAR2 (18)

  OLDER_MD_FLAG NOT NULL VARCHAR2 (3)

  TRANSACTION_ID NOT NULL VARCHAR2 (108)

  According to my knowledge, RANGE is better suited for the DATE or NUMBER. and partition INTERVAL is available on the DATE or number.

  PROFILE of column

  I havets is of type VARCHAR2. I know that again I can partition as Oracle convert internally to varchar2 in number when the data is inserted. But the INTERVAL is not possible.  However, so could you please suggest how RANGE partition on PROFILE?

  CREATED_ON column:

  It's the NUMBER with decimals. Could you guide me please?

  Please let me know if you need more information?

  See you soon

  Sameer

  I partitioned table as below:

  PARTITION BY RANGE

  (

  "CREATED_ON".

  )

  SUBPARTITION BY HASH

  (

  'PROFILE '.

  )

  SUBPARTITION TEMPLATE

  (

  TABLESPACE SUBPARTITION 'PROF_SUB01"'PSAPISU."

  TABLESPACE SUBPARTITION 'PROF_SUB02"'PSAPISU."

  TABLESPACE SUBPARTITION 'PROF_SUB03"'PSAPISU."

  TABLESPACE SUBPARTITION 'PROF_SUB04"'PSAPISU."

  TABLESPACE SUBPARTITION 'PROF_SUB05"'PSAPISU."

  TABLESPACE SUBPARTITION 'PROF_SUB06"'PSAPISU."

  TABLESPACE SUBPARTITION 'PROF_SUB07"'PSAPISU."

  TABLESPACE SUBPARTITION 'PROF_SUB08"'PSAPISU."

  TABLESPACE SUBPARTITION 'PROF_SUB09"'PSAPISU."

  TABLESPACE SUBPARTITION 'PROF_SUB10' 'PSAPISU '.

  )

  (

  "BEF12_CP00" VALUES LOWER PARTITION TO (20120101000000),

  "JAN12_CP01" VALUES LOWER PARTITION TO (20120201000000),

  "FEB12_CP02" VALUES LOWER PARTITION TO (20120301000000),

  "MAR12_CP03" VALUES LOWER PARTITION TO (20120401000000),

  "APR12_CP04" VALUES LOWER PARTITION TO (20120501000000),

  "MAY12_CP05" VALUES LOWER PARTITION TO (20120601000000),

  "JUN12_CP06" VALUES LOWER PARTITION TO (20120701000000),

  "JUL12_CP07" VALUES LOWER PARTITION TO (20120801000000),

  "AUG12_CP08" VALUES LOWER PARTITION TO (20120901000000),

  "SEP12_CP09" VALUES LOWER PARTITION TO (20121001000000),

  "OCT12_CP10" VALUES LOWER PARTITION TO (20121101000000),

  "NOV12_CP11" VALUES LOWER PARTITION TO (20121201000000),

  "DEC12_CP12" VALUES LOWER PARTITION TO (20130101000000),

  "JAN13_CP13" VALUES LOWER PARTITION TO (20130201000000),

  "FEB13_CP14" VALUES LOWER PARTITION TO (20130301000000),

  "MAR13_CP15" VALUES LOWER PARTITION TO (20130401000000),

  "APR13_CP16" VALUES LOWER PARTITION TO (20130501000000),

  "MAY13_CP17" VALUES LOWER PARTITION TO (20130601000000),

  "JUN13_CP18" VALUES LOWER PARTITION TO (20130701000000),

  "JUL13_CP19" VALUES LOWER PARTITION TO (20130801000000),

  "AUG13_CP20" VALUES LOWER PARTITION TO (20130901000000),

  "SEP13_CP21" VALUES LOWER PARTITION TO (20131001000000),

  "OCT13_CP22" VALUES LOWER PARTITION TO (20131101000000),

  "NOV13_CP23" VALUES LOWER PARTITION TO (20131201000000),

  PARTITION 'OTHER_CPMAX' VALUES LESS THAN (MAXVALUE)

  )

  works very well.

• CCleaner shows a plugin in firefox without the name of the program or the Publisher and with a version number of '0', and it can be disabled or deleted.

  CCleaner shows a plugin in Firefox without the name of the program or the Publisher and with a version number of '0', and it can be disabled or deleted. It is a plugin for Firefox by default, and if so, what do I do? It does not appear in my list of Firefox addons in Firefox and a malware scan does not detect.

  It is possible that the profile has become corrupted, and you can try to start a new profile.

  • Use the Profile Manager to create and delete profiles Firefox