The boot configuration data file is missing some information required. File:\BCD error code: 0xc0000034.

Similar Questions

• The boot configuration data file is missing some required information, error code: 0xc000000d

  Original title: question of recovery of Windows 8

  I have a Toshiba laptop with windows 8.  and this morning when I tried to turn it on, it's the message that is displayed:

   

  "RECOVERY".

  your PC needs to be repaired

  The boot configuration data file is missing some required information

   

  File \BCD

  Error code: 0xc000000d

  
  you will need to use the tools of recovery on your installation media. "If you, etc.".

   

  There is no USB or CV came with the laptop.  It is automatically installed when I first turned on.

   

  I was looking at a trip to this topic last night and everything was perfect, now, this morning, I get this message.

   

  I restarted the computer a few things, but this message is still there.

   

  My question is how can I get my laptop to work again, because I can't go in the computer to change the settings or options.

   

  Help, please

   

  Thank you

  Winnie

  Hello

  We are here to help.

  You can perform the troubleshooting steps below:

  Option 1: Windows startup parameters in the Windows recovery environment .

  • Windows recovery environment, enter in safe mode. After you have successfully loaded in safe mode, perform the clean boot.

  Option 2: restore your PC to an earlier point in time .

  1. Enter in the right edge of the screen and then click on Search.
  2. Enter the Control Panel in the search box, and then tap or click Control Panel.
  3. Enter the collection in the control panel search box, and then tap or click recovery.
  4. Press or click open system restore, and then follow the instructions.

  Let us know how it goes.
  

• Windows 8 will not mistake The Boot Configuration Data file is missing some required information.

  Yesterday, I downloaded Windows 8, and although using it was confusing I got the hang of it. Today, I used the computer again and everything was fine but then I stopped him and a few hours later, when I turned it on a blue screen appeared and he says:

  Recovery
  Your PC needs to be repaired
  The Boot Configuration data file is missing some information required.
  Leader: \Boot\0xc000000d
  OT: After victory. Download 8 it won't launch
  I have no idea what is happening or how to fix it. Any help to help me understand and solve this problem would be appreciated.

  Met the same question from one day to the other - re install Win 8< week="" old="" decided="" to="" misbehave="" on="" a="" reboot.="" nothing="" untoward="">

  In any case discovered that the automatic startup repair is less useless for me. He could not fix anything whatsoever after the diagnosis and just gave up.

  However, resort to repair (start your windows installation CD) command line prompt, I managed to solve it with the command of the ffg on the command line.

  Bootrec /rebuildbcd

  More info about bootrec available using your favorite search engine.

  for example, this site was useful for me

  http://superuser.com/questions/451277/missing-boot-files-in-Windows-8

  For users in previous posts with problems and have only a version downloaded to Win 8 - well I'd say that you yourself create a DVD of the version uploaded to win 8 - the installation program ask you if you want to create media - that will create a 4.x GB. ISO file that you can burn to DVD. There is enough information on how to do this just search online.

  With regard to creating a way to initiate Win8 installer from USB Eh well I heard the ffg tool works with Win 8 too but cannot vouch for her since have never tried so its at your own risk.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool?ClickID=ckqs4fqifskwfnxlpiwkzwxqwwwzlvvlezzk

  Good luck, have fun,

  See you soon

• Unable to start Win8. Error: "0xc0000098. "The boot configuration data file contains no valid information for an operating system".

  Original title: Windows 8 will not start

  I have a pre installed Windows 8 pro and have therefore no disks in the system. It does not start, but I get a message from the "Windows Boot Manager" with the message "Windows couldn't boot...". «, etc, etc and told to contact the ' system administrator or computer manufacturer...» "then the information:
  File: \BCD
  Status: 0xc0000098
  Info: the boot configuration data file contains no valid information for an operating system.

  How can I get it back? Can I get a system disk or can I do?

  Hi David,

  Thank you for getting back to us with additional information.

  If you have another computer with Windows 7 or Vista installed, you can create Windows 8 DVD installation of this system. But you need to get the product key Windows 8 of the manufacturer of the computer. Please refer to this link and create a DVD of Windows 8.

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Hope this information is useful.

• The Boot Configuration data file contains no valid information for an operating system

  I have a Toshiba Satellite C55 B5200 running Windows 8.1 pre-installed. How ever when I boot, I get the Boot Configuration Data file does not contain valid information for an operating system to file: \BCD error Code: 0xc0000098

  If I do a usb on a friends computer system recovery, it will affect the recovery of my computer? I don't have product key windows 8 as it was preinstalled. If I go down to the store, buy Windows 8.1 will be this also fixes my problem? Any help is appreciated

  Hello

  Please refer to this and see if it helps:

  http://www.thewindowsclub.com/0xc0000098-error-Windows-8-help

  Hope this helps, good luck :)

• Windows Boot Configuration data file is missing required information

  Hello

  I am trying to boot up my laptop and the Windows Boot Manager appears saying that Windows could not start.

  File: \boot\bcd

  Status 0xc000000d

  Info: The windows boot configuration data file is missing required information.

  I have a laptop Dell Inspiron notebook, which came with Windows 7 pre-installed so I didn't have an installation disc, nor do I have a CD player.  How can I solve this problem and is it simple?  I tried to turn on my new laptop and pressing F8 but nothing happens and the windows Boot Manager appears again.  Can someone help me please, or I'll have to return someone to solve this problem for me?

  Thank you

  Michael

  For questions of Windows7 you should repost in the Windows7 Forums: http://social.answers.microsoft.com/Forums/en-US/category/windows7 where Windows7 experts will be happy to help you.  It is a Forum of Vista so I wasn't expecting a question of Windows7.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Boot Configuration data file - knows how to solve the need advice that no one shared

  Hello

  I just got the

  Recovery: Boot Configuration data file is missing fileh \bcd

  error code 0xc000000d

  To solve that I need to get the windows disc 8 to repair the laptop, the only problem is that I don't have the disc that I just moved away from home in my own apartment for uni and don't have another computer of the rhe download files on a usb key and recover the laptop, so I thought I just buy windows 8 and install it on my computer and hopefully solve this , but it might not work because my computer came with Windows 8 installed so I could stuff something im not sure and it's just my brain fusion trying to understand this point, so if anyone has any what advice id greatly appreciate, oh and sorry if this isn't the best grammar mode spelling etc. IM on my phone and it is laggy as phones get, thanks.

  Dan G

  Hello Daniel,.

  Thanks for posting your query on Microsoft Community forum.

  According to the description you get the error Boot Configuration data (BCD). I totally agree with you that, in order, to rebuild the Boot Configuration data (BCD) we need the installation media.

  If you do not have any other computer to create the installation media, then it is best to contact the manufacturer of your computer instead to buy Windows from outside. If your computer is under warranty, they can provide you with the ERD free of charge or at minimal cost.

  If you manage to organize other computers or repair disk, try the steps below. You can try to create installation media by following the steps described in the article mentioned below.

  To create installation media Windows 8.1

  • Boot from the DVD of Windows 8.
  • Click repair your computer.
  • Click Troubleshooting , and then select Advanced Options.
  • Click on command prompt and type the following commands and press enter after each command:

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /rebuildbcd

  • Restart the computer.
  • Check if the problem persists.

  Get back to us with your question was last updated. We will be more than happy to help you.

  Kind regards

• the windows boot configuration data file does not contain a valid entry os

  Hello

  I got this message when recovery... I can't get the windows... I have the CD recovery, but when I boot it... It gives me this message

  the windows boot configuration data file does not contain a valid entry os

   

  
  How do I solve this problem

  Hello

  Assuming that it's just a problem with the recovery media, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( it must be the same version that originally shipped with your laptop - IE if your laptop comes with Windows 7 Home Premium, that is the file you need to download ) from the link below and use an app like ImgBurn to burn the ISO correctly file on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Image is - Digital River.

  Images of Windows 7.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software you may need are located by entering your full model number or Nr here.

  Kind regards

  DP - K

• File: \BCD error code: 0xc000000d ThinkPad S540

  Hello, I have a now 6 months and yestrday S540 when I restart the laptop, because to slow down, I got this error message:

  ------

  Recovery
  You are the PC needs to be repaired.
  Boot configuration data is missing some information required.
  File: \BCD
  Error code: 0xc000000d
  You will need to use the tools of recovery on your installation media. If you does not have any facility (such as a disc or USB device) support, contact your system administrator or the computer manufacturer.

  ---

  If youo knows how to solve this problem, let me know.

  Also in retail, computer laptop didn't strt, can't do anything.

  Thanks in advace.

  I have been using on the laptop's recovery partition.

  Whan starting press f11, you can try to fix it, or there is another solution, I have chousl check what it was.

  But check where it is mentioned that he keep your data.

• NB10t error code - has 0xc0000034 Boot Configuration Data file missing

  Hi need help

  I just opened my laptop and it came with the recovery with the above error screen.

  Can someone help me

  Are you able to perform a repair procedure?

  Please check this Toshiba document:
  https://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

  To access the system restore, refresh and Reset options by using the F12 option at startup, follow these steps:

  1. If not already, make sure that the computer is completely shut down.
  2. now restart the computer by pressing the power button - IMMEDIATELY start typing the keyboard F12 key until the "Boot Menu" is displayed.
  3. using the arrow keys, select , and then press "Enter".
  4. in the next screen you will need to confirm whether you want to contiue with recovery. Select "Yes".
  5. the computer will take you to the advanced boot screen.
  6. Select troubleshoot. Under the resolution of the problems, you will see "Refresh" and "Reset".
  7. Select 'Advanced Options '. Located here is "system restore."

• "Boot Configuration data are missing some required information.

  Hi, my phone displays the message above on my toshiba L50b title.

  File: \BCD

  Error code 0 x 0000034

  I never received a recovery media device when I bought the computer laptop, is anyway for me to repair my laoptop to the internet?

  Thank you!

  Dot

  Hello

  Please follow the fix mentioned here, in accordance with your request, you must first create the system recovery disk:

  http://www.kapilarya.com/fix-the-boot-configuration-data-file-is-missing-some-required-information

  Hope this helps, good luck :)

• I got the error code: 0xc0000034 on my windows 8 and need help.

  I got home exhausted and started my Windows 8 desktop computer I was greeted with a screen that says The Boot Configuration data file is missing some required information. File: \BCD error Code: 0xc0000034. I don't know anything else and have no idea of what are the parameters of the UEFI firmware, help me?

  Hi Gilbert,.

  1. What is the brand and model of the computer?

  2. do you have the DVD to install Windows 8 with you?

  UEFI (Unified Extensible Firmware Interface) is a standard interface for firmware for PCs, designed to replace the BIOS (basic input/output system). This standard was created by more than 140 technology companies within the consortium UEFI, y. It is designed to improve the boundaries of interoperability and software address of the BIOS.

  You can view the following for more information Microsoft article.

  What is UEFI?

  http://Windows.Microsoft.com/en-in/Windows-8/what-UEFI

  This error occurs when one of the following conditions is true:

  • The Windows boot manager entry (Bootmgr) is not present in the Boot Configuration data (BCD) store.
  • The Boot\BCD file on the active partition is damaged or missing.

  I suggest you perform the steps mentioned by "P Jessen replied on 10 August 2013" in the material provided.

  Error code: 0xc0000034 in Windows 8 - start of the file Configuration data missing required information

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-system/error-code-0xc0000034-in-Windows-8-boot/15e63631-1f94-473f-83a8-8d7af48a83f7

  Hope this information helps. Response with status so that we can help you.

• Error code: 0xc0000034 in Windows 8 - start of the file Configuration data missing required information

  Hi my friend has a Samsung ativ 700 t pro (xe700T1C)

  An update came on his computer to upgrade to 8.1 windows and she accepted the update.

  When the computer has been restarted, an come blue screen error message (error Code: 0xc0000034 in Windows 8 - Boot Configuration data file necessary missing information).

  can help you with a solution?

  I have the same tablet, but I'm still on windows 8.

  see you soon

  Hello

  There is a link available now where you can upload an image from 8.1 to win without a key needed to download... You can save an ISO, create a Flash drive or burn a DVD...

  At least I save the ISO and create a flash...

  The only problem I know is you need to do this on a Win 7 machine or higher and the same 32 or 64-bit machine you make it for...

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

• Corrupt Windows Vista boot configuration data?

  Hey there.

  So, my Acer Aspire 5570 actually running Vista for a while now. I tried to have it dual boot a Linux OS, worked well, then, I received a message "corrupt boot configuration data" when I tried to boot to Vista. I googled for answers, and I was not able to find any help. The only way I can get into Vista is via a command prompt any. I did everything that he restore points, and I've never had the OS installation discs. ZORIN, the Linux OS partition works very well. Any help?

  UPDATE: I think I can find something. You are not sure if it will work, but worth it, right? BTW, it starts at the Startup Repair, and I go into the advanced options or something.

  UPDATE (again): looks like Zorin has replaced ALL my files in Vista, even if it was SAID NOT TO DO THAT (yes I yell at computers, problem?) I tried these links: http://www.troublefixers.com/unable-to-boot-in-windows-vista-windows-boot-configuration-data-file-is-missing-required-information/, http://pcsupport.about.com/od/fixtheproblem/ht/rebuild-bcd-store-windows.htm, http://pcsupport.about.com/od/termsl/p/logon.htm, http://pcsupport.about.com/od/fixtheproblem/tp/recovery_console_commands.htm and http://pcsupport.about.com/od/termss/p/system-recovery-options.htm, but nothing worked. I have to buy a new version of Vista and install it? My Acer is a bit too old to upgrade, I think.

  Hello

  You do not need to buy a new version of Vista, you can reinstall the version you have as often you want on this machine.

  Something has gone wrong with your Dual Boot with Linux; but there is a special way to set that up, which is often mentioned in the Linux/Ubuntu Forums.

  If you want to reinstall Vista again, IF this option is still available, you press LEFT Alt + F10 keys at startup and Vista is re-installed normally Acer 'hidden' partition recovery.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  If the dual-boot ruined who, you might ask Acer to send you recovery disks, which they used to do for a small fee.

  But Acer has ceased to provide the recovery disc Vista for most, if not all of its models.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Emits Boot Configuration data.

  I recently came across some problems when trying to dual boot my machine with Windows 7 and Ubuntu.

  Long story short, that I ended up wiping the disk by removing all partitions and starting over.

  Once the reboot my machine and tries to start up the Windows 7 installation cd I get the following error

  "Unable to start Windows. A recent hardware or software change might be the cause. ........

  File: EFI\Microsoft\Boot\BCD

  Status: 0xc000000d

  Info: an error occurred trying to read the boot configuration data. »

  I've tried everything I can think of, reset the cmos, went so far as to try a different hard drive, same results.

  What can I do to fix this problem when I can't start the installation cd and get the command prompt to use the bootrec tool?

  Frederik, thanks for your help. I realized what was causing the problem, the airport authority of bios configured to boot from UEFI instead of the legacy, switched things around and everything worked perfectly.