File: \BCD error code: 0xc000000d ThinkPad S540

Similar Questions

• The boot configuration data file is missing some information required. File:\BCD error code: 0xc0000034.

  I just bought my ASUS laptop (with no dvd player) 3 days ago. Today I turned on for the first time and was usually up to 1 hour later this bluescreen poped out: RECOVERY, your PC needs to be repaired. The boot configuration data file is missing some information required. File:\BCD error code: 0xc0000034. You will need to use the tools for restore on your installation media. If you don't have any media of the instalation (such as a disc or USB device), contact your system administrator or the PC manufacturer... As I said before that my laptop came with Windows 8, and it is not a dvd player.

  Thank you.

  Remove the power supply and remove the battery

  Press and hold the power button for 60 seconds

  Apply the AC voltage ONLY (DO NOT INSTALL THE BATTERY)

  Click on the power button and more quickly, press F9

  Follow the instructions to reset the computer to factory default

• Get the error Code: 0xc000000d and your PC needs to be repaired.

  * Original title: Error Code: 0xc000000d

  Hello, I have Windows 8, and at random, I had projected blue and the computer reset and now I have this message on my computer when I try to start it

  Your PC needs to be repaired

  The Boot Configuration data file is missing some required information

  File: \Boot\BCD
  Error code: 0xc000000d

  You will need to use the tools of recovery on your support of instillation. f you do not have any media (such as a disc or usb device) please contact your system administrator device

  I can't pass this screen please help. The only disc that came with this computer is a reinstallation DVD.

  Hello

  Please follow the steps mentioned here and see if they help you:

  http://www.kapilarya.com/fix-the-boot-configuration-data-file-is-missing-some-required-information

  Hope this helps, good luck :)

• The boot configuration data file is missing some required information, error code: 0xc000000d

  Original title: question of recovery of Windows 8

  I have a Toshiba laptop with windows 8.  and this morning when I tried to turn it on, it's the message that is displayed:

   

  "RECOVERY".

  your PC needs to be repaired

  The boot configuration data file is missing some required information

   

  File \BCD

  Error code: 0xc000000d

  
  you will need to use the tools of recovery on your installation media. "If you, etc.".

   

  There is no USB or CV came with the laptop.  It is automatically installed when I first turned on.

   

  I was looking at a trip to this topic last night and everything was perfect, now, this morning, I get this message.

   

  I restarted the computer a few things, but this message is still there.

   

  My question is how can I get my laptop to work again, because I can't go in the computer to change the settings or options.

   

  Help, please

   

  Thank you

  Winnie

  Hello

  We are here to help.

  You can perform the troubleshooting steps below:

  Option 1: Windows startup parameters in the Windows recovery environment .

  • Windows recovery environment, enter in safe mode. After you have successfully loaded in safe mode, perform the clean boot.

  Option 2: restore your PC to an earlier point in time .

  1. Enter in the right edge of the screen and then click on Search.
  2. Enter the Control Panel in the search box, and then tap or click Control Panel.
  3. Enter the collection in the control panel search box, and then tap or click recovery.
  4. Press or click open system restore, and then follow the instructions.

  Let us know how it goes.
  

• Unable to save the family settings, error: the system cannot find the specified file 80070002 error code.

  Original title: Family Safety filter configuration problem.

  Hello.

  I got family safety works very well before a reinstall of Windows 7 Professional.  After I install windows essentials, I connect to my microsoft account, now I'm trying to set up the filter, monitored accounts are already checked, the only option is to save.

  When I click Save I get this

  The system cannot find the specified file 80070002 error code.

  I've tried everything.  Uninstall, reinstall Windows Essentials 2012.  First of all, I did a partial install with just the film and the family.  Uninstalled.  Re-installed full.  Always the same question.  I even tried to install Windows Essentials 2011.  No change.

  Help, please.  I appreciate it.

  Thank you

  GISIGER

  Hi Greg,.

  Thanks for the reply.

  Run the System File Checker tool.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833

  Also reset Windows update components and check if this solves the problem.

  Refer to this link:

  http://support.Microsoft.com/kb/971058

   

  Important: Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.

  Keep us informed on the status of the issue.

• Why mac won't erase the files - 43 error code

  I have an iMac that runs on the Version OS X El Capitan 10.11.3.  The processor is 3.2 GHz Intel Core i5 8 GB 1600 MHz DDR3 memory.

  For these last days, I was unable to use the move to trash function.  "Whenever I try to delete a file, I get the following error message:"

  The operation cannot be performed because one or more required items be found.  (Error code - 43) "I have so don't know why it happens suddenly.

  I checked to make sure that the software is up to date.  How to restore the move to trash function?  I am a novice and do not want to rely on

  using the terminal each time that I want to delete a file.

  Someone help me please.

  Restart the computer and see if the problem goes away.

• problem installing app creative cloud on MacMini OS 10.10.5... says to Setup cannot copy a file critical Error Code: 43?

  Error code: 43?

  Please check the following links, if all goes well it would be fixed.

  • https://forums.Adobe.com/thread/1513988
  • Error code install CC 43

• I ran the Windows memory diagnostic tool, he keeps repeating and will not be finished, finally Boot Manager Windows appears with the error code: 0xc000000d.

  I ran the windows memory diagnostic tool on my PC toshiba laptop equium, it restarts priming for display and then directly into the RAM test...
  Unfortunately, it will not end and keeps repeating and finally if leave to work for a few hours the Windows Boot Manager comes in and stops the RAM test while noting an error 0xc000000d code. I REALLY can't reformat what I have given crucial for the thesis of the University and I only have the Vista installation disc not repair...
  This RAM test shows whenever I start the PC, how can I forget that he spent his RAM test a pc and more? I'm so confused!

  Any ideas on how may get a repair disk or fix it otherwise? Thank you very much

  Run Memtest86 +: your computer passes this test?

  Memtest86 + is running from a floppy or CD and should eliminate or confirm if your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.

  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.

  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  J W Stuart: http://www.pagestart.com

• Vista - Error Code: 0XC000000D (black screen after the installation of update)

  Original title: blocked Vista patch

  Patch Vista landed on black screen

  message on the screen

  "0xc000000d" registry/40015/55341 (thing)

  It's the August updates, sorry I have no idea who would be KB. This is on a Dell Latitude D630 laptop. Auto repair did not work and States that there is in a slump.

  Any help in this would be very appreciated

  Hi RickL123,

  What is you receive the exact error message?

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: start the computer in last good known Configuration (and also in safe mode). To do this, follow the steps below:

  Access Advanced Startup menu options by turning on your computer and pressing the button F8 continuously until Windows starts. In the boot advanced options, select last good known Configuration-Safe Mode

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 3: You can follow the steps mentioned in the article below, which deals with a similar question

   

  Your computer may freeze or it may restart to a black screen that has an 0xc0000034 error message after you install a service pack for Windows Vista

  http://support.Microsoft.com/kb/975484

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• file 0xc000014c error code: \windows\system32\config\system

  The power blew home, when I tried from my computer, the error message appears

  Cannot start Windows, a recent hardware or software change might be the cause. TO solve the problem:

  1, insert your windows installation disc and restart your computer

  2. choose your language settings, and then click "Next".

  3. click on "repair your computer".

  If you do not have this disvc, contact your system administrator or computer manufacturer for assistance.

  File: \windows\system32\config\system

  Status: 0xc000014c

  Info: windows could not load because the system registry file is missing or corrupt.

  I have a reinstallation dvd, which was given by dell when the computer came, but wanted to know if it would be delte all my files on the computer, because I have not backed them up recently and have important information on the computer.

  It allows me to start in the mode without failure or last known good configuration option.

  Help, please

  Thank you

  Hi nav singh,.

  Reinstall Dell drive is the installation as well as full disk, we can use it to perform the startup on computer repair.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't delete a file. Error code "" cannot delete file: cannot read the source file or disk "?"

  I saved two accessories to my email which could not be read. I've identified Micrsoft Word like the program to use so he opened one of them OK and I was able to remove it. However, I can't delete it. Properties of one, I can not delete are of file Type:, file size: 0 bytes; size on disk: 0 bytes.

  Today was the second time this has happened to me.

  Try to start safe mode and see if it will remove. If this isn't the case, give this tool a whirl.

  Unlocker File Remover

  Download it from FileHippo
  http://filehippo.com/download_unlocker/

  Download from CNET
  http://download.CNET.com/WOT/3000-2378_4-75011499.html

  You may need it as well.

  How to capture a file or a folder in Windows XP
  http://support.Microsoft.com/kb/308421

• Windows 7 file Recovery Error Code 0 x 80070422

  I just got a new 4 TB Seagate external hard drive, and whenever I try to put in place the recovery of files of Windows 7, I chose the drive, let Windows choose what to back, confirm the settings, and then I get this:

  
  I check to make sure that all the following services are running because I read on the web that they all need to run:
  [quote]

  -"Remote Procedure Call" (RPCSS) must be activated, automatic

  -"System event COM +" (EventSystem) must be enabled, manual.

  -' System Event Notification Service"(SENSE) must be activated, automatic.

  -"Volume Shadow Copy" (VSS) must be enabled, manual.

  'Microsoft Software Shadow Copy provider' (SWPRV) must be enabled, manual.

  -' Block level backup engine Service' must be activated, manual

  [\quote]

  They are all running.
  I then ran sfc/scannow from an elevated command prompt, rebooted and tried again.
  Still no backup.
  What is the problem and how can I solve this problem.
  Thank you
  4strings

  Ok. So I went through the entire list of Services and concluded that the "Backup Windows" service has been completely disabled! I have re-enabled (set to manual), recovery of files started Windows 7 and everything worked as it should!

• My alienware x 51 r2 starts and say recovery and error code 0xc000000d!

  So it was yesterday it worked perfectly play in skyrim and minecraft I turned it off to play on my Xbox, and then I woke up the next day and turned on my pc and it says that the pc needs to be repaired, so I put in the recovery disk and clicked on repair computer then get bored and all the solutions did not work is anyone know how to resolve this?

  Hello!

  Follow the steps without troubleshooting startup of this video and I would like to know the results.

• Error installing Creative Cloud application 'installation program could not access a critical file. (Error code: 48) »

  

  I installed the application on a computer in domain not and it worked, it must have been a group policy...

• Windows 8.1 error code 0xc0000034

  Hi all

  today I turned on my Razer Blade anda blue screen came up with the following on the screen:

  Recovery
  Your PC needs to be repaired
  The Configuration of Boot data file missing some required information.
  File: \BCD
  Error code: 0xc0000034

  You will need to use the tools of recovery on your installation media. If you have any installation
  Media (such as a disc or usb device), contact your system administrator or the computer manufacturer.

  Press ESC RPF UEFI Fireware settings

  I tried to follow the steps explained here http://answers.microsoft.com/en-us/windows/forum/windows_8-system/error-code-0xc0000034-no-recovery-disk-hard-drive/32fad3a7-c498-4597-ace8-20074fcb0cf2, but an error "this product key can be used to install the final version of Windows 8.1" (I translate from Italian, so maybe the sentence in English is not this one, but it's sense). Obviously, Windows 8.1 is original, since I bought the Razer Blade in January 2014.

  What can I do? Can you help me?

  Thank you

  Chiara

  Hi Chiara,

  The file showing how to start Windows is missing. To fix it, you need your support to Windows Setup. Do you have the DVD or USB, you used to install Windows 8.1? If so, answer comes back with Yes. If this isn't the case, you can use another computer on Windows 8.1 if you have one for the media to recover your PC. To do (and it only works if you have another Windows 8 PC) follow the instructions of this link.